Efeito dos Níveis de Cantaxantina na Dieta Sobre o Desempenho e Qualidade dos Ovos de Poedeiras Comerciais

O experimento teve como objetivo estudar os efeitos de níveis de cantaxantina sobre o desempenho e a coloração das gemas dos ovos de galinhas poedeiras. Foram utilizadas 384 galinhas da linhagem Hisex Brown, em um delineamento em blocos ao acaso, contendo seis tratamentos (0, 12, 24, 36, 48 e 60 ppm de cantaxantina), com oito repetições de oito aves por parcela. O período experimental foi de 56 dias. A coleta de ovos foi realizada diariamente e a análise de coloração dos ovos foi efetuada com o abanico colorimétrico da Roche. Durante os 14 dias do período inicial do experimento, a melhor coloração das gemas foi obtida com a adição de 60 ppm de cantaxantina, atingindo-se a cor plateau de 14,3 do leque colorimétrico Roche aos 5,43 dias de inclusão do pigmentante. Considerando-se o período experimental total, os níveis de cantaxantina utilizados melhoraram de forma quadrática a coloração das gemas, sem influenciar os parâmetros produtivos e demais características de qualidade dos ovos de poedeiras comerciais.

Alterações Morfólogicas de Codornas Poedeiras Submetidas a Muda Forçada

Objetivou-se avaliar as alterações físicas, produção de ovos e mortalidade de codornas poedeiras submetidas a muda forçada, durante um período de jejum. Utilizou-se um delineamento inteiramente ao acaso, com quatro tratamentos (0, 1, 2, e 3) dias de jejum, com três repetições de 36 aves por parcela. No início e ao final do período de jejum 2 aves por parcela foram abatidas, pesadas individualmente e sacrificadas para retirada e avaliação do ovário, oviduto, e fígado. Os resultados mostraram que no período de jejum de três dias houve uma redução de 25,64% no peso vivo, a produção de ovos caiu a 2,81% e a mortalidade foi de 4,60%.

Alterações Morfológicas e Desempenho de Cordornas Poedeiras Tratadas com Diferentes Programas de Alimentação no Período de Repouso, da Muda Forçada

O experimento objetivou avaliar as alterações físicas, produção de ovos e mortalidade de codornas poedeiras alimentadas por diferentes períodos com milho moído após muda forçada. Utilizou-se um delineamento inteiramente ao acaso, com três tratamentos (0, 4 e 7) dias de alimentação com milho moído e quatro repetições de 30 aves por parcela para análise do peso vivo e mortalidade e duas aves por parcela para análise das características físicas. Os resultados mostraram involução do aparelho reprodutivo até o quarto dia após muda forçada. Após sete dias, as aves alimentadas com ração de produção atingiram o peso que possuíam antes da muda forçada, e aos onze dias, as aves alimentadas com milho moído por sete dias não haviam ainda recuperado o peso de aparelho reprodutivo existente antes da muda forçada.

Alimentação de Codornas com Milho Moído e Ração de Postura no Período Pós-jejum Durante a Muda Forçada e Seus Efeitos Sobre o Desempenho

O experimento foi realizado com o objetivo de avaliar o desempenho de codornas poedeiras alimentadas por diferentes períodos com milho moído ou ração de postura durante sete dias após três dias de jejum, método de muda utilizado. Após esse período, as aves foram alimentadas com ração de postura durante as 20 semanas do período experimental. Utilizou-se um delineamento inteiramente ao acaso com três tratamentos (ração de postura por sete dias, ração de postura por três dias e milho moído por quatro dias e milho moído por sete dias), e quatro repetições de 24 aves por parcela. Os resultados mostraram que aves alimentadas apenas com ração de postura nos sete primeiros dias após o jejum apresentaram maior produção de ovos nas seis primeiras semanas do período de produção pós-muda. Porém, não foi constatado efeito de tratamento sobre a produção de ovos, peso dos ovos, consumo de ração e conversão alimentar durante as 20 semanas do período experimental.

Stress Analysis in Platform-Switching Implants: A 3-Dimensional Finite Element Study

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and pen-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the Solid Works 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0 degrees), oblique (45 degrees), and lateral (90) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the pen-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

Influence of Microgap Location and Configuration on Radiographic Bone Loss in Nonsubmerged Implants: An Experimental Study in Dogs

Purpose: The implant-abutment connection (microgap) influences the pen-implant bone morphology. However, it is unclear if different microgap configurations additionally modify bone reactions. This preliminary study aimed to radiographically monitor pen-implant bone levels in two different microgap configurations during 3 months of nonsubmerged healing. Materials and Methods: Six dogs received two implants with internal Morse taper connection (INT group) on one side of the mandible and two implants with external-hex connection (EXT group) on the other side. One implant on each side was positioned at bone level (equicrestal); the second implant was inserted 1.5 mm below the bone crest (subcrestal). Healing abutments were attached directly after implant insertion, and the implants were maintained for 3 months without prosthetic loading. At implant placement and 1, 2, and 3 months, standardized radiographs were taken to monitor pen-implant bone levels. Results: All implants osseointegrated. A total bone loss of 0.48 +/- 0.66 mm was measured in the equicrestal INT group, 0.69 +/- 0.43 mm in the equicrestal EXT group, 0.79 +/- 0.93 mm in the subcrestal INT group, and 1.56 +/- 0.53 mm in the subcrestal EXT group (P>.05, paired t tests). Within the four groups, bone loss over time became significantly greater in the EXT groups than in the INT groups. The greatest bone loss was noted in the subcrestal EXT group. Conclusion: Within the limits of this animal study, it seems that even without prosthetic loading, different microgap configurations exhibit different patterns of bone loss during nonsubmerged healing. Subcrestal positioning of an external butt joint microgap may lead to faster radiographic bone loss. Int J Prosthodont 2011;24:445-452.

Influence of Microgap Location and Configuration on Peri-implant Bone Morphology in Nonsubmerged Implants: An Experimental Study in Dogs

Purpose: It is unknown whether different micro gap configurations can cause different pen-implant bone reactions. Therefore, this study sought to compare the peri-implant bone morphologies of two implant systems with different implant-abutment connections. Materials and Methods: Three months after mandibular tooth extractions in six mongrel dogs, two oxidized screw implants with an external-hex connection were inserted (hexed group) on one side, whereas on the contralateral side two grit-blasted screw implants with an internal Morse-taper connection (Morse group) were placed. on each side, one implant was inserted level with the bone (equicrestal) and the second implant was inserted 1.5 mm below the bony crest (subcrestal). Healing abutments were inserted immediately after implant placement. Three months later, the peri-implant bone levels, the first bone-to-implant contact points, and the width and steepness of the peri-implant bone defects were evaluated histometrically. Results: All 24 implants osseointegrated clinically and histologically. No statistically significant differences between the hexed group and Morse group were detected for either the vertical position for peri-implant bone levels (Morse equicrestal -0.16 mm, hexed equicrestal -0.22 mm, Morse subcrestal 1.50 mm, hexed subcrestal 0.94 mm) or for the first bone-to-implant contact points (Morse equicrestal -2.08 mm, hexed equicrestal -0.98 mm, Morse subcrestal -1.26 mm, hexed subcrestal -0.76 mm). For the parameters width (Morse equicrestal -0.15 mm, hexed equicrestal -0.59 mm, Morse subcrestal 0.28 mm, hexed subcrestal -0.70 mm) and steepness (Morse equicrestal 25.27 degree, hexed equicrestal 57.21 degree, Morse subcrestal 15.35 degree, hexed subcrestal 37.97 degree) of the pen-implant defect, highly significant differences were noted between the Morse group and the hexed group. Conclusion: Within the limits of this experiment, it can be concluded that different microgap configurations influence the size and shape of the peri-implant bone defect in nonsubmerged implants placed both at the crest and subcrestally. INT J ORAL MAXILLOFAC IMPLANTS 2010;25:540-547

Palatal lymphangioma: A case report

Lymphangioma is a rare, congenital benign tumor involving vascular malformation, with a great potential for recurrence. It appears during the early years of life and therefore is highly common among children. We report here a five-year-old patient with a simple lymphangioma. The mother of the child reported she had noted the lesion in the palate after an injury in the area with a pen. The recommended treatment was surgical excision since this was a small and well-delimited lesion. Periodic clinical controls for 18 months showed that the mucosa presented normal characteristics, with no signs of recurrence.

The performance of conventional and fluorescence-based methods for occlusal caries detection An in vivo study with histologic validation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Influence of Pit and Fissure Sealants on Infrared Fluorescence Measurements

The aim of this in vitro study was to evaluate the influence of pit and fissure sealants on fluorescence readings using lasers. We selected 166 permanent molars and randomly divided them into 4 groups which were each treated with a different sealant (a commercially available clear sealant, 2 opaque sealants and an experimental nanofilled clear sealant). The teeth were independently measured twice by 2 experienced dentists using conventional laser fluorescence (LF) and a laser fluorescence pen device (LFpen), before and after sealing, and again after thermocycling to simulate the thermal stressing between the tooth and the dental materials. Friedman test showed no statistically significant changes using LF and LFpen for the commercial clear sealant group, although values tended to increase after sealing. However, the values increased significantly after thermocycling. There was a statistically significant decrease in fluorescence after application of opaque sealants. After application of the experimental nanofilled clear sealant, LF values increased only after thermocycling, whereas the LFpen values increased after sealing and after thermocycling as well. The intraclass correlation coefficient ranged from 0.87 to 0.96 for interexaminer and 0.82 to 0.94 for intraexaminer reproducibility. It was shown that pit and fissure sealants influence LF and LFpen readings, with the values increasing or decreasing according to the material used. In conclusion, both laser fluorescence devices could be useful as an adjunct to detect occlusal caries under unfilled clear sealants. Nevertheless, surfaces sealed with clear nanofilled material could be assessed using only the LF device. Copyright (C) 2008 S. Karger AG, Basel.

Performance of fluorescence methods, radiographic examination and ICDAS II on occlusal surfaces in vitro

This study compared the performance of fluorescence-based methods, radiographic examination, and International Caries Detection and Assessment System (ICDAS) II on occlusal surfaces. One hundred and nineteen permanent human molars were assessed twice by 2 experienced dentists using the laser fluorescence (LF and LFpen) and fluorescence camera (FC) devices, ICDAS II and bitewing radiographs (BW). After measuring, the teeth were histologically prepared and assessed for caries extension. The sensitivities for dentine caries detection were 0.86 (FC), 0.78 (LFpen), 0.73 (ICDAS II), 0.51 (LF) and 0.34 (BW). The specificities were 0.97 (BW), 0.89 (LF), 0.65 (ICDAS II), 0.63 (FC) and 0.56 (LFpen). BW presented the highest values of likelihood ratio (LR)+ (12.47) and LR- (0.68). Rank correlations with histology were 0.53 (LF), 0.52 (LFpen), 0.41 (FC), 0.59 (ICDAS II) and 0.57 (BW). The area under the ROC curve varied from 0.72 to 0.83. Inter- and intraexaminer intraclass correlation values were respectively 0.90 and 0.85 (LF), 0.93 and 0.87 (LFpen) and 0.85 and 0.76 (FC). The ICDAS II kappa values were 0.51 (interexaminer) and 0.61 (intraexaminer). The BW kappa values were 0.50 (interexaminer) and 0.62 (intraexaminer). The Bland and Altman limits of agreement were 46.0 and 38.2 (LF), 55.6 and 40.0 (LFpen) and 1.12 and 0.80 (FC), for intra- and interexaminer reproducibilities. The posttest probability for dentine caries detection was high for BW and LF. In conclusion, LFpen, FC and ICDAS II presented better sensitivity and LF and BW better specificity. ICDAS II combined with BW showed the best performance and is the best combination for detecting caries on occlusal surfaces. Copyright (C) 2008 S. Karger AG, Basel.

Effect of Platelet-Rich Plasma on Peri-Implant Bone Repair: A Histologic Study in Dogs

The present study evaluated the effect of platelet-rich plasma (PRP) on pen-implant bone healing. A total of 9 mongrel dogs received 36 dental implants with sandblasted acid-etched surface in lower jaws in a split-mouth design: in the PRP group (n = 18 implants) the implants were placed in association with PRP, and in the control group (n = 18 implants) the implants were placed without PRP. Biopsies were obtained and prepared for histologic and histometric analysis after 15, 30, and 55 days of healing. The biopsies retrieved at 15 days showed delicate bone trabeculae formed by immature bone with presence of numerous osteoblasts for both groups. At 30 days the trabeculae presented reversal lines and evident lamellar disposition, where some thread spaces were filled by bone and dense connective tissue. At 55 days, bone healing was not altered in the control group, and histologic aspects were variable for the group treated with PRP. There was no significant difference between the groups for bone-to-implant contact (P > .05). PRP did not enhance bone formation around sandblasted acid-etched implants.

Paternal treatment with cisplatin impairs reproduction of adult male offspring in rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

KARYOTYPE and NUCLEOLUS ORGANIZER REGIONS of Ophisternon aenigmaticum (Teleostei: Synbranchiformes: Synbranchidae) FROM VENEZUELA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variações anatômicas no aparelho reprodutor masculino de Chaunus ornatus (Wied-Neuwied, 1821) (Anura, Bufonidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)