996 resultados para Municípios de pequeno porte populacional
Resumo:
Pós-graduação em Genética e Melhoramento Animal - FCAV
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
A produção agrícola em áreas urbanas é um fenômeno presente no cenário mundial e tornou-se essencial para alimentação de famílias em diversas cidades de países em desenvolvimento. A agricultura urbana acarreta uma gama de benefícios aos locais que a praticam como garantia da segurança alimentar, geração de renda, aumento de áreas verdes usando lotes ociosos, entre outros. O atual modelo de desenvolvimento agrícola exerce pressão sobre as áreas rurais em diversos aspectos, seja reduzindo os espaços para pequenos produtores, como forçando-os a migrar para áreas urbanas. No Brasil o cénário não é diferente, e essa migração é crescente. As cidades de pequeno porte, que acolhem esses migrantes, ainda apresentam muitas características rurais, como a manutenção do hábito de plantar. O município de Charqueada, SP, se enquadra nessa categoria de cidade pequena e apresenta diversos terrenos cultivados na área urbana. O presente estudo tem como objetivo descrever a agricultura urbana em Charqueada, enfocando os cultivos em lotes vagos, bem como compreender sua dinâmica no local, registrar o conhecimento desses agricultores e fazer um levantamento das plantas alimentares cultivadas. A pesquisa se deu em três etapas de campo: a) mapeamento dos lotes cultivados na malha urbana; b) levantamento de dados socioeconômicos e sobre os cultivos em uma amostra geral; e (c) e em uma subamostra, com visitas aos lotes e coleta de material botânico. As amostras foram selecionadas aleatoriamente e os levantamentos foram realizados através de entrevistas estruturadas e semi-estruturadas, com métodos etnobotânicos. Os dados coletados foram analisados de maneira descritiva. Foram encontrados 97 lotes cultivados, destes, 77 participaram da amostragem geral e 30 da subamostra. Os agricultores são na grande maioria homens, de baixa renda, acima de 50 anos de idade... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Many small businesses suffer from a lack of control of goods stored. This lack of control affects other areas of the company as purchase, that can’t buy material in an advanced and accurated way. It also affects services provided by the company, especially when it is a store because for sell something it is necessary to have the material in the right time. Futhermore, the business isn’t able to identify obsolete items in stock, theft and vandalism, loss or damage to materials. All of these disorders can be converted into financial losses that make much difference to a small business that needs to remain competitive in the market facing the giants while generating a profit that allows it to invest in their growth. Therefore, any unnecessary expense is exceedingly harmful and any savings already differentiates it from other companies of similar size. This study deals with the application of production engineering tools as 5S, kanban and layout in a building materials retail to tackle problems that prevent this company to have a stock organized and accurated. Finally, we recorded gains that the company reached with the implementation of part of the solution proposed
Resumo:
Brazil is nowadays the greatest bet of investors for the future due to its stable economy growth. The country has grown side by side with the greatest demand for electrical energy. The international appeal for renewable sources is causing a change in the Brazilian energetic matrix, raising the amount of energy generated by thermoelectric power plants. The construction of new power plants, running on biomass, requires a crescent number of capacitated personnel to run them. The Faculdade de Engenharia de Guaratinguetá – UNESP – has a steam laboratory; witch is deactivated, which has a thermoelectric plant of small capacity. The laboratory reactivation and the return of its activities can be an important tool in order to graduate engineer able to operate on such units. This paper proposes four new experiments to be simulated on the Collage’s Energy Dep. Steam Lab when it gets back to its educational activities
Resumo:
Atualmente, é grande a quantidade de cursos d’água continentais que se encontram contaminados por poluentes, tais como produtos químicos, metais, esgoto e detergentes biodegradáveis. Tendo em vista o fato de a musculatura possuir um papel fundamental na realização do nado em peixes, sua importância se reflete em atividades como caça, fuga, procura pelo alimento, defesa, migração, etc. Alterações na estrutura muscular de peixes, que possam vir a ocorrer devido à presença de poluentes na água trarão sérias implicações para o modo de vida destes, especialmente no caso de Astyanax altiparanae que é uma espécie pelágica e nadadora ativa. Consequentemente, tem havido uma crescente preocupação em relação aos poluentes e os efeitos que estes podem ter sobre as populações de peixes que habitam esses ambientes aquáticos poluídos, uma vez que estes constituem uma das fontes de alimento mais importantes para certas populações humanas assim como a principal fonte de renda para comunidades pesqueiras. Sendo assim, pretendeu-se por meio do presente estudo, analisar e identificar possíveis alterações na estrutura morfológica da musculatura peitoral e caudal em peixes de pequeno porte como Astyanax altiparanae, bem como analisar a ocorrência de um possível envelhecimento precoce destas, que possam ter sido causados pelos poluentes contidos na água com detergente diluído, na água do Lago Azul, Rio Claro, SP, em comparação com a água pura do poço artesiano da UNESP – Campus Rio Claro que foi clorada de acordo com o modelo requerido pela SABESP e constituiu o grupo controle. A análise foi feita com base na comparação do grupo controle com aqueles expostos aos poluentes e foram utilizadas técnicas de histologia, histoquímica e fluorescência
Resumo:
The biomass gasification systems have been used for a long time and prove to be a good alternative to the generation of energy problems. This type of management requires a simple installation and maintenance which gives them a high availability. In Biomass project via Call CTEnerg 33/2006-1, funded by the Ministry of Science and Technology - MCT - Brazil, the Group Energy Systems Optimization – GOSE - at FEG - UNESP built and tested two prototypes of gasifiers. These is fed with 25 kg / h of dry wood (chips), and 50 Nm3 / h of air to produce gas at a flow rate of approximately 70 Nm3 / h of wood (syngas) at a temperature approximately 600 ° C. In this work of graduation, studies were conducted on the materials used in both the gasifier as well as cleaning the filter synthesis gases. The system of gas cleaning and conditioning is vital to ensure the life of the Internal Combustion Engine. In this case the studies of different filters for small gasification systems (properties, materials used, characteristics, types, etc.) are very relevant to its use in the prototype of the college campus. Were also performed a technical and economic analysis of a cogeneration system that consists in the combination of the downdraft gasifier studied in this work, an internal combustion engine, two heat exchangers and a SRA (absorption system refrigerator). Were calculated the costs of electricity generation, hot water and cold water. Finally, we analyzed the economic feasibility of the project
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
The industries face increasingly fierce competition, so that differentiation becomes more and more difficult. In the case of the branch of machine tool industries this scenario is aggressive, those firms face competition from around the world, which have good quality and low price. This paper aims to propose the creation of a department to promote standardization in a company of special tools. The goal was achieved from survey of theories and applications of quality management, knowledge management and standardization, done by scholars in these areas, which added the use of qualitative study resulted in a proposal that contained not only the creation of this department as possible approaches that can be applied by him. This work is limited to the study of a company that manufactures special tools of the state of São Paulo, which despite its small size and limited number of employees, also presents common situations to other companies in the field, especially with regard to the behavior employees, and present good practices that can be implemented by any company
Resumo:
The research aims to propose grants for development of Municipal Plan for the Management of Organic Solid Waste generated in the municipality of Rio Claro. The research universe was composed of organic waste generators establishments (markets and grocers). From the registry of commercial establishments provided by the municipal government were identified who presented this typology, which totaled 38 establishments. In this universe the interview was conducted in 15 establishments obtained by directed sampling based on the characteristics of size, type and location. The data collected were the amount generated, disposal of waste, waste separation, collection frequency, reasons for the disposal of waste, frequency of purchase of products. From the data obtained in the field, we estimated the total generation of organic waste in this segment for the municipality. Then, the estimated costs for implementation and operation of a composting center, a way to subsidize the implementation of the management plan was carried out. We opted for the aerobic composting process by the simplicity of operation and because it is a technique already known. The average waste generation was established by tracks (size) with: stores up to 4 boxes (classified as small) generate on average 1511 kg / month, 40% of organic waste, the 5-9 boxes (small/midsize) generate on average 4338 kg / month, 35% organic and the 10 to 19 boxes (midsize) generate on average 7647 kg / month with 32% organic. In total establishments generate 105 t/ month of waste, with 35t / month of organics. 94% of establishments are in font segregation of waste into recyclable, organic and waste, indicating that the proposed management of organic waste is amenable to application without many changes in existing routine in stores. Recyclables are sent for recycling through selective collection held by the cooperative, while the organics are destined for the landfill and feed. The results indicate...
Resumo:
O presente estudo foi realizado na Escola do Meio Ambiente (EMA) (22° 55' 23 S e 48° 27' 28 W), localizada a cinco km do centro do município de Botucatu. Foi realizado o levantamento preliminar da ictiofauna e dos invertebrados habitantes de uma represa de pequeno porte, inserida no perímetro da escola. Visando investigar os conhecimentos prévios dos alunos que realizam a Trilha da água, referentes às espécies habitantes do reservatório do Ribeirão Lavapés, 356 questionários foram aplicados aos alunos dos 6ºs anos e 150 questionários aos dos 2ºs anos de três escolas municipais de Botucatu. Quatro espécies de peixes e uma do grupo dos invertebrados foram coletadas. A análise dos questionários demonstrou o desconhecimento dos alunos em relação à fauna local. Este trabalho apresenta as etapas para a construção de um material didático, de apoio ao professor visitante da Trilha da Água, o qual aborda a fauna de peixes e invertebrados que habitam um açude pertencente à Escola do Meio Ambiente
Resumo:
Many variables are indirectly involved in the transformation of raw material into a metallurgical industry, such as machine hours, hours of hand labor directly and / or indirect, setup time, etc. This research focuses on the complexity of formulating the cost of metallurgical products, based on a case study, in which one has incurred a large loss on the sale of a product called Punch. The main objective of this work is to define the variables of the cost of members and other metallurgical products, so simplified general, checking what were the failures costing the case studied, in order to help others. The method of formulating cost was determined as recommended by SEBRAE guidance for small businesses. The results showed a loss R$ 13.201,00 in the batch of 15 units of punch. Possible improvements have been identified for reducing the production cost
Resumo:
As espécies estudadas neste projeto, Dendropsophus nanus e Dendropsophus sanborni, são pererecas de pequeno porte, morfologicamente semelhantes e ocupam nichos similares. O presente trabalho foi realizado na Floresta Estadual Edmundo Navarro de Andrade, município de Rio Claro, estado de São Paulo e teve como objetivo obter informações acerca da biologia reprodutiva de ambas as espécies. Os principais resultados obtidos foram referentes à: (1) Relações de tamanho-fecundidade em fêmeas de D. nanus, sendo que foi significativa a correlação entre número de ovos e comprimento rostro-cloacal de fêmeas, o que não ocorreu para correlações entre tamanho dos ovos e CRC de fêmeas e entre tamanho e número de ovos, (2) Seleção do tamanho dos machos em D. nanus, com as fêmeas aparentemente acasalando com machos proporcionalmente mais leves e (3) Comportamento de desova de D. sanborni semelhante ao relatado para D. werneri, havendo dois tipos de interação parecidos: um envolvendo movimentos da cabeça e o outro das patas traseiras do macho, ambos descritos pela primeira vez para D. sanborni neste estudo.
Resumo:
The Project presents as main subject the relationship between entrepreneurship and the Public Relations professional. In the entrepreneurship, business plan is stood up, a document able to assist the entrepreneur to plan the activities related to implementation or creation of a new business. Assuming the business plan is an essential instrument of the entrepreneurial process, this study aims to describe the important use of the business plan for the creation or maintenance of a company and verify the Public Relations acting possibilities in the construction of this plan. For this, the project presents a study on a business plan for a small company with family structure, located in Sao Paulo countryside, in operation for over 30 years. Through the process of the business plan elaboration, it can be seen that the Public Relations professional has important skills that can be assist in the preparation of this plan, such as Marketing tools and communication knowledge and ability to establish a mission, the vision and the company values. Besides, this professional presents entrepreneurial characteristics that can help him in his activities, actions and planning
Resumo:
There are obvious changes that occur within the cities, experienced in synthesis for the degradation of the environment and especially the worsening quality of life. Even small cities, began to exhibit characteristics typical of an atmospheric climate. Thus, it becomes natural to analyze the characteristics of these spaces, unlike the medium and large cities, provide a detailed analysis of the peculiarities of intra-urban space in order to highlight what factors enhance or soften the formations of a typical urban climate distinct patterns of land use. The aim of this research from a geoenvironmental mapping of attributes (uses and land cover, vegetation and tree characteristics of buildings) while representing the dynamic City entertainment. Thus, we seek to inter-relate these indicators to analysis climate urban-rural and intra-urban applied to the city of Alfredo Marcondes / SP, a small town in order to identify a potential compromise climate conditions point to generate a specific climate. From this detailed analysis, we intend to give suggestions with the government to improve the comfort of that environment. For the data collection was organized a specific methodology for its collection, organization and representation and for the record of climatic data (temperature, wind speed and direction and cloud cover) were used mini-shelters weather with temperature sensors in fixed locations, and a temperature sensor attached on the side of a vehicle, 1.5 meters in height from the floor for 42 points perpassando selected in different intra-urban spaces... (Complete abstract click electronic access below)