Gestão de Redes Baseada em Agentes Móveis

A gestão das redes informáticas converteu-se num fator vital para as redes operarem de forma eficiente, produtiva e lucrativa. A gestão envolve a monitorização e o controlo dos sistemas para que estes funcionem como o pretendido. Ações de configuração, monitorização e reconfiguração dos componentes, são essenciais para melhorar o desempenho, diminuir o tempo de inatividade, melhor a segurança e efetuar contabilização. A maioria das aplicações de gestão de Redes assenta no paradigma centralizado cliente-servidor, onde um servidor central coleta e analisa dados provenientes dos diferentes elementos dispersos pela rede. Esses dados de gestão estão armazenados em bases de dados de gestão localizadas nos diversos elementos da rede. No entanto, este paradigma não tem conseguido dar resposta às exigências das redes atuais. Surge assim a necessidade de utilizar novos paradigmas para a gestão das redes. Uma alternativa baseada no paradigma dos agentes móveis já foi estudada, proposta e desenvolvida para a gestão da rede do GECAD-ISEP. Neste trabalho pretende-se propor e adicionar novas capacidades aos agentes móveis existentes, assim como novos agentes. Com vista à validação da solução proposta recorre-se à utilização de um simulador de redes.

ROAZ Autonomous Surface Vehicle Design and Implementation

The design of an Autonomous Surface Vehicle for operation in river and estuarine scenarios is presented. Multiple operations with autonomous underwater vehicles and support to AUV missions are one of the main design goals in the ROAZ system. The mechanical design issues are discussed. Hardware, software and implementation status are described along with the control and navigation system architecture. Some preliminary test results concerning a custom developed thruster are presented along with hydrodynamic drag calculations by the use of computer fluid dynamic methods.

Swordfish: an Autonomous Surface Vehicle for Network Centric Operations

The design and development of the swordfish autonomous surface vehicle (ASV) system is discussed. Swordfish is an ocean capable 4.5 m long catamaran designed for network centric operations (with ocean and air going vehicles and human operators). In the basic configuration, Swordfish is both a survey vehicle and a communications node with gateways for broadband, Wi-Fi and GSM transports and underwater acoustic modems. In another configuration, Swordfish mounts a docking station for the autonomous underwater vehicle Isurus from Porto University. Swordfish has an advanced control architecture for multi-vehicle operations with mixed initiative interactions (human operators are allowed to interact with the control loops).

Autonomous Surface Vehicle Docking Manoeuvre with Visual Information

This work presents a hybrid coordinated manoeuvre for docking an autonomous surface vehicle with an autonomous underwater vehicle. The control manoeuvre uses visual information to estimate the AUV relative position and attitude in relation to the ASV and steers the ASV in order to dock with the AUV. The AUV is assumed to be at surface with only a small fraction of its volume visible. The system implemented in the autonomous surface vehicle ROAZ, developed by LSA-ISEP to perform missions in river environment, test autonomous AUV docking capabilities and multiple AUV/ASV coordinated missions is presented. Information from a low cost embedded robotics vision system (LSAVision), along with inertial navigation sensors is fused in an extended Kalman filter and used to determine AUV relative position and orientation to the surface vehicle The real time vision processing system is described and results are presented in operational scenario.

Fractional Calculus: Application in modeling and control

This contribution introduces the fractional calculus (FC) fundamental mathematical aspects and discuses some of their consequences. Based on the FC concepts, the chapter reviews the main approaches for implementing fractional operators and discusses the adoption of FC in control systems. Finally are presented some applications in the areas of modeling and control, namely fractional PID, heat diffusion systems, electromagnetism, fractional electrical impedances, evolutionary algorithms, robotics, and nonlinear system control.

Controlo de acesso móvel

O mercado de smartphones tem vindo a crescer massivamente nos últimos anos, bem como a diversi cação das suas funcionalidades no dia-a-dia de cada pessoa. O mercado aberto de aplicações para estes equipamentos também tem sofrido uma forte evolução o que permite uma maior qualidade e competitividade pela apresentação de produtos. O conceito de casas inteligentes está cada vez mais presente e é algo que as pessoas se estão a acomodar de forma gradual. Para acompanhar tal feito, é necessário desenvolver as capacidades dos equipamentos que estas pessoas mais usam para que estes possam dar resposta a estas necessidades. Para o caso atual irão ser estudadas as fechaduras inteligentes. Os sistemas comercializados atualmente, são tipicamente sistemas proprietários e apresentam algumas limitações ou faltas (ex: ao nível da segurança, incapacidade de abranger um largo número de dispositivos móveis ou mesmo ao nível do preço). Neste contexto, e com base na caracterização das soluções de controlo de acesso atuais, foi estudada a viabilidade de, usando uma abordagem assente em tecnologias não proprietárias (i.e., abertas), desenvolver soluções de controlo de acesso com características comparáveis com os sistemas proprietários actuais e, eventualmente, ultrapassando os limites e falhas identi cados. Dadas estas premissas o sistema de controlo de acesso móvel pensado envolve um computador BeagleBone Black e a tecnologia sem os Bluetooth. Este sistema permite a fácil integração do computador com qualquer smartphone atual e é dotado de fortes características de segurança e privacidade. O sistema foi concebido inicialmente para ser implementado em fechaduras de portas mas com possibilidade de expansão para outros equipamentos. Além disso, o sistema permitirá também o acesso a terceiros após a devida autorização do dono.

Bullwhip effect, in production control: a comparison between traditional methods and LPS

21th Annual Conference of the International Group for Lean Construction (IGLC 21), July 2013, Fortaleza, Brazil

How reporting and controlling systems can be effectively designed to support the decision-making process: The case of a Software SME

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Predictive control of a current-source inverter for solar photovoltaic grid interface

Solar photovoltaic systems are an increasing option for electricity production, since they produce electrical energy from a clean renewable energy resource, and over the years, as a result of the research, their efficiency has been increasing. For the interface between the dc photovoltaic solar array and the ac electrical grid is necessary the use of an inverter (dc-ac converter), which should be optimized to extract the maximum power from the photovoltaic solar array. In this paper is presented a solution based on a current-source inverter (CSI) using continuous control set model predictive control (CCS-MPC). All the power circuits and respective control systems are described in detail along the paper and were tested and validated performing computer simulations. The paper shows the simulation results and are drawn several conclusions.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Reduction, Linearization and stability of relative equilibria for mechanical systems on riemannian manifolds

Consider a Riemannian manifold equipped with an infinitesimal isometry. For this setup, a unified treatment is provided, solely in the language of Riemannian geometry, of techniques in reduction, linearization, and stability of relative equilibria. In particular, for mechanical control systems, an explicit characterization is given for the manner in which reduction by an infinitesimal isometry, and linearization along a controlled trajectory "commute." As part of the development, relationships are derived between the Jacobi equation of geodesic variation and concepts from reduction theory, such as the curvature of the mechanical connection and the effective potential. As an application of our techniques, fiber and base stability of relative equilibria are studied. The paper also serves as a tutorial of Riemannian geometric methods applicable in the intersection of mechanics and control theory.

Anàlisi del sistema operatiu RTLinux e implementació d'un entorn de desenvolupament de tasques en temps real (aplicat al control de processos)

El projecte "Anàlisi del sistema operatiu RTLinux i implementació d'un entorn de desenvolupament de tasques en temps real" analitza la possibilitat de crear un entorn de desenvolupament de tasques en temps real per poder crear sistemes de control complex, tot això mitjançant codi lliure. Inicialment es fa un aprenentatge sobre el concepte de temps real, després s'elegeix el sistema operatiu en temps real RTLinux per a crear l'entorn de desenvolupament utilitzant el llenguatge de programació Tcl/Tk. Es creen un conjunt d'aplicacions (pel control computacional) per estudiar la viabilitat de la construcció de l'entorn desitjat per facilitar la tasca de l'usuari final. Aquest projecte obre multitud de possibles camins a continuar: comunicació remota, implementació de planificadors, estudi de controladors, etc.

Modelo de un grupo de robots colaboradores cazadores

El nombre d'aplicacions dels microrobots en biomedicina creix a mesura que el seu desenvolupament avança. Entre elles hi ha les consistents a examinar cèl·lules amb microrobots cooperants. En aquest treball es presenta un prototip a escala d'aquest problema, convenientment simplificat: dos robots tracten d'agafar una pilota que representa la cèl·lula que s'examina. Com a resultat, s'ha obtingut un algorisme deliberatiu per a la resolució d'aquest problema amb robots homogenis.

Navegación, guiado y control de vehículos aeroespaciales

El objetivo del proyecto es diseñar una plataforma de ensayos para la simulación de vuelos de vehículos aeroespaciales. La plataforma permitirá diseñar y evaluar los algoritmos de navegación, guiado y control de los vehículos aeroespaciales modelados en la plataforma de simulación, focalizando el trabajo de los ingenieros en el modelado de vehículos y en el desarrollo de sistemas de control digital. La memoria recoge las fases de un proyecto de ingeniería del software, describiendo el plan de proyecto, el análisis del sistema, la especificación de requisitos y el diseño del mismo.

Utilització del robot mòbil com a eina d'aprenentatge en ensenyaments tècnics

En aquest Projecte de Millora de la Qualitat Docent es descriu el disseny, la construcció i la utilització d’un robot mòbil com a eina docent en titulacions d’Enginyeria. El robot mòbil té com a element de control un PC portàtil convencional per tal de facilitar el procés d’aprenentatge de l’alumnat estigui centrat en l’objectiu de les pràctiques i no en el funcionament i control del robot. A més a més, el robot disposa d’un elevat nombre de sensors i actuadors per tal d’oferir un elevat grau d’interdisciplinaritat.