A study of teachers' espoused instructional beliefs

The purpose of this study was to investigate teachers' espoused instructional beliefs and whether they differed in relation to schools' socioeconomic status, extent of teachers' educational background, or extent of teachers' classroom experience. The study comprised a total of 242 Miami-Dade County public school educators who responded to a thirty-nine question Likert scale, Literacy Instructional Practices Questionnaire. Eighteen schools, three from each of the six regions, were purposively selected based on the socioeconomic status of students. Nine participants were interviewed using semi-standardized interview procedures and open-ended questioning techniques. ^ Multivariate Analysis of Variance (MANOVA) results revealed that teachers' espoused beliefs concerning the instruction of literacy and forces and influences affecting instruction do not significantly differ depending on schools' socioeconomic status, extent of teachers' educational background, or extent of teachers' classroom experience. The majority of teachers appear to follow a top-down generated direct instruction model. Generally, students are taught as a whole class and ability grouped for specific skill instruction utilizing commercially produced reading and language arts texts. ^ There was no evidence of a relationship between teachers' espoused beliefs concerning the model of instruction that they practice or teachers' espoused beliefs concerning research and its application to practice and the three independent variables. Interview data corroborated much of the information garnered through the questionnaire. However, interview participants espoused the belief that research did not influence their selection of instructional practices. ^ Although teachers perceive of themselves as eclectic in their espoused instructional beliefs, they appear to follow a skills based direct instruction pedagogy in practice. Much of what teachers believe constitutes effective practice, few researchers recommend, affirming the findings of Calderhead (1993) and the National Educational Research Policy and Priorities Board (U.S. Department of Education, 1998, p. 18) that “educators rarely know research, seek it out, or act in accordance with its results.” ^

A Study of Teachers' Espoused Instructional Beliefs

The purpose of this study was to investigate teachers’ espoused instructional beliefs and whether they differed in relation to schools’ socioeconomic status, extent of teachers’ educational background, or extent of teachers’ classroom experience. The study comprised a total of 242 Miami-Dade County public school educators who responded to a thirty-nine question Likert scale, Literacy Instructional Practices Questionnaire. Eighteen schools, three from each of the six regions, were purposively selected based on the socioeconomic status of students. Nine participants were interviewed using semi-standardized interview procedures and open-ended questioning techniques. Multivariate Analysis of Variance (MANOVA) results revealed that teachers’ espoused beliefs concerning the instruction of literacy and forces and influences affecting instruction do not significantly differ depending on schools’ socioeconomic status, extent of teachers’ educational background, or extent of teachers’ classroom experience. The majority of teachers appear to follow a top-down generated direct instruction model. Generally, students are taught as a whole class and ability grouped for specific skill instruction utilizing commercially produced reading and language arts texts. There was no evidence of a relationship between teachers’ espoused beliefs concerning the model of instruction that they practice or teachers’ espoused beliefs concerning research and its application to practice and the three independent variables. Interview data corroborated much of the information garnered through the questionnaire. However, interview participants espoused the belief that research did not influence their selection of instructional practices. Although teachers perceive of themselves as eclectic in their espoused instructional beliefs, they appear to follow a skills based direct instruction pedagogy in practice. Much of what teachers believe constitutes effective practice, few researchers recommend, affirming the findings of Calderhead (1993) and the National Educational Research Policy and Priorities Board (U.S. Department of Education, 1998, p. 18) that “educators rarely know research, seek it out, or act in accordance with its results.”

Democratização do acesso ao ensino superior: os cursos de graduação à distância na UFRN

This thesis pursuits to contextualize the theoretical debate between the implementation of public education policy of the Federal Government focused in a distance learning and legal foundations for its enforcement, in order to raise questions and comments on the topic in question. Its importance is back to provide scientific input and can offer to the academy, particularly in the UFRN, and elements of society to question and rethink the complex relationship between the socio-economic and geographic access to higher education. It consists of a descriptive study on the institutionalization of distance education in UFRN as a mechanism for expanding access to higher education, for both, the research seeks to understand if the distance undergraduate courses offered by the UAB system and implemented at UFRN, promote expanding access to higher education, as it is during implementation that the rules, routines and social processes are converted from intentions to action. The discussion of this study lasted between two opposing views of Implementation models: Top-down and Bottom-up. It is worth noting that the documents PNE, PDE and programs and UAB MEETING reflect positively in improving the educational level of the population of the country It is a qualitative study, using the means Bibliographic, Document and Field Study, where they were performed 04 (four) in 2010 interviews with the management framework SEDIS / UAB in UFRN. The data were analyzed and addressed through techniques: Document Analysis and Content Analysis. The results show that the process of implementation of distance education at UFRN is in progress. According to our results, the research objective is achieved, but there was a need to rethink the conditions of the infrastructure of poles, the structure of the academic calendar, the management of the SEDIS UFRN, regarding the expansion of existing vacancies and the supply of new courses by the need for a redesign as the Secretariat's ability to hold the offerings of undergraduate courses offered by the Federal Government to be implemented in the institution. It was also found that levels of evasion still presents a challenge to the teaching model. Given the context, we concluded that the greatest contribution of UAB and consequently UFRN by distance learning for undergraduate courses (Bachelor in Mathematics, Physics, Chemistry, Geography and Biological Sciences, beyond the bachelor's degrees in Business and Public Administration ) is related to increasing the number of vacancies and accessibility of a population that was previously deprived of access to university

Proposta de implementação da valência músculo esquelética na área de fisioterapia no hospital do Cunene, em Angola

Mestrado em Fisioterapia

Análise comparativa "in vitro" da extrusão apical de detritos originados por diferentes técnicas de instrumentação do sistema de canais radiculares

Introdução: A extrusão apical detritos (EAD) consequência indesejável da instrumentação canalar pode ser associada a dor/edema, podendo atrasar a cicatrização periapical. O nosso trabalho teve como objectivo avaliar e quantificar a EAD em canais instrumentados por sistemas de instrumentação rotatória contínua e reciprocante. Materiais e Métodos: 80 dentes monocanalares sem tratamento endodôntico prévio foram aleatoriamente divididos em 4 grupos (n=20): One Shape® Protaper® NEXT, Hyflex® EDM e WaveOne® Gold. Um tubo de Eppendorf (TdE) foi pesado antecipadamente numa balança analítica de precisão e com um dente inserido foi montado num dispositivo modificado, similar ao método descrito por Myers & Montgomery. Os canais foram instrumentados e irrigados com água destilada. Os dentes instrumentados foram removidos dos TdE e estes preenchidos com água destilada até perfazer 1,5ml, incubados a 70ºC durante cinco dias sendo pesados novamente, calculando a diferença entre o peso inicial e final determinando o peso dos detritos. Os dados foram analisados estatisticamente utilizando o IBM SPSS Statistics 22, considerando α=0,05. Efetuaram-se testes Kruskal-Wallis e post-hoc com ajustamento do ρ-value pelo método Dunn-Bonferroni. Resultados: Houve EAD em todas as técnicas de instrumentação. A análise estatística mostrou haver diferenças significativas na EAD entre as técnicas utilizadas (α=0,002). Entre as técnicas WaveOne® Gold e One Shape® (α=0,003), WaveOne® Gold e Protaper® NEXT (α=0,023) e WaveOne® Gold e Hyflex® EDM (α=0,028). Conclusões: A técnica One Shape® apresentou menor EAD e a técnica WaveOne® Gold com movimento reciprocante constitui maior fator de risco tendo apresentado maior EAD. Os resultados deste estudo indicam que os profissionais devem estar cientes para a EAD que pode ocorrer com cada instrumento, o que poderá servir de base para a selecção de um instrumento particular. Implicações clínicas: A escolha do sistema de instrumentação canalar influencia a extrusão de detritos. Fontes de financiamento: Agradecimentos as empresas; Micro-Mega, França, COLTÉNE e Dentsply Maillefer, Suíça.

Second worldwide proficiency study on variable number of tandem repeats typing of Mycobacterium tuberculosis complex

Global Network for the Molecular Surveillance of Tuberculosis 2010: A. Miranda (Tuberculosis Laboratory of the National Institute of Health, Porto, Portugal)

Discontinuous Galerkin Methods for Advection-Diffusion-Reaction Problems on Anisotropically Refined Meshes

In this paper we consider the a posteriori and a priori error analysis of discontinuous Galerkin interior penalty methods for second-order partial differential equations with nonnegative characteristic form on anisotropically refined computational meshes. In particular, we discuss the question of error estimation for linear target functionals, such as the outflow flux and the local average of the solution. Based on our a posteriori error bound we design and implement the corresponding adaptive algorithm to ensure reliable and efficient control of the error in the prescribed functional to within a given tolerance. This involves exploiting both local isotropic and anisotropic mesh refinement. The theoretical results are illustrated by a series of numerical experiments.

Análise e modelagem do escoamento transitório de fluidos de perfuração

Drilling fluids present a thixotropic behavior and they usually gel when at rest. The sol-gel transition is fundamental to prevent the deposit of rock fragments, generated by drilling the well, over the drill bit during eventual stops. Under those conditions, high pressures are then required in order to break-up the gel when circulation is resumed. Moreover, very high pressures can damage the rock formation at the bottom of the well. Thus, a better understanding of thixotropy and the behavior of thixotropic materials becomes increasingly important for process control. The mechanisms that control thixotropy are not yet well defined and modeling is still a challenge. The objective of this work is to develop a mathematical model to study the pressure transmission in drilling fluids. This work presents a review of thixotropy and of different mathematical models found in the literature that are used to predict such characteristic. It also shows a review of transient flows of compressible fluids. The problem is modeled as the flow between the drillpipe and the annular region (space between the wall and the external part of the drillpipe). The equations that describe the problem (mass conservation, momentum balance, constitutive and state) are then discretized and numerically solved by using a computational algorithm in Fortran. The model is validated with experimental and numerical data obtained from the literature. Comparisons between experimental data obtained from Petrobras and calculated by three viscoplastic and one pseudoplastic models are conducted. The viscoplastic fluids, due to the yield stress, do not fully transmit the pressure to the outlet of the annular space. Sensibility analyses are then conducted in order to evaluate the thixotropic effect in pressure transmission.

Preparation of environmental monitoring plan pattern for surface water quality in Iran (Case study: Gharehsou River)

Using water quality management programs is a necessary and inevitable way for preservation and sustainable use of water resources. One of the important issues in determining the quality of water in rivers is designing effective quality control networks, so that the measured quality variables in these stations are, as far as possible, indicative of overall changes in water quality. One of the methods to achieve this goal is increasing the number of quality monitoring stations and sampling instances. Since this will dramatically increase the annual cost of monitoring, deciding on which stations and parameters are the most important ones, along with increasing the instances of sampling, in a way that shows maximum change in the system under study can affect the future decision-making processes for optimizing the efficacy of extant monitoring network, removing or adding new stations or parameters and decreasing or increasing sampling instances. This end, the efficiency of multivariate statistical procedures was studied in this thesis. Multivariate statistical procedure, with regard to its features, can be used as a practical and useful method in recognizing and analyzing rivers’ pollution and consequently in understanding, reasoning, controlling, and correct decision-making in water quality management. This research was carried out using multivariate statistical techniques for analyzing the quality of water and monitoring the variables affecting its quality in Gharasou river, in Ardabil province in northwest of Iran. During a year, 28 physical and chemical parameters were sampled in 11 stations. The results of these measurements were analyzed by multivariate procedures such as: Cluster Analysis (CA), Principal Component Analysis (PCA), Factor Analysis (FA), and Discriminant Analysis (DA). Based on the findings from cluster analysis, principal component analysis, and factor analysis the stations were divided into three groups of highly polluted (HP), moderately polluted (MP), and less polluted (LP) stations Thus, this study illustrates the usefulness of multivariate statistical techniques for analysis and interpretation of complex data sets, and in water quality assessment, identification of pollution sources/factors and understanding spatial variations in water quality for effective river water quality management. This study also shows the effectiveness of these techniques for getting better information about the water quality and design of monitoring network for effective management of water resources. Therefore, based on the results, Gharasou river water quality monitoring program was developed and presented.

Estudo experimental do escoamento bifásico líquido gás em golfadas com leve mudança de direção

Gas-liquid two-phase flow is very common in industrial applications, especially in the oil and gas, chemical, and nuclear industries. As operating conditions change such as the flow rates of the phases, the pipe diameter and physical properties of the fluids, different configurations called flow patterns take place. In the case of oil production, the most frequent pattern found is slug flow, in which continuous liquid plugs (liquid slugs) and gas-dominated regions (elongated bubbles) alternate. Offshore scenarios where the pipe lies onto the seabed with slight changes of direction are extremely common. With those scenarios and issues in mind, this work presents an experimental study of two-phase gas-liquid slug flows in a duct with a slight change of direction, represented by a horizontal section followed by a downward sloping pipe stretch. The experiments were carried out at NUEM (Núcleo de Escoamentos Multifásicos UTFPR). The flow initiated and developed under controlled conditions and their characteristic parameters were measured with resistive sensors installed at four pipe sections. Two high-speed cameras were also used. With the measured results, it was evaluated the influence of a slight direction change on the slug flow structures and on the transition between slug flow and stratified flow in the downward section.

Simulação numérica do escoamento monofásico em uma bomba centrífuga radial

Centrifugal pumps are vastly used in many industrial applications. Knowledge of how these components behave in several circumstances is crucial for the development of more efficient and, therefore, less expensive pumping installations. The combination of multiple impellers, vaned diffusers and a volute might introduce several complex flow characteristics that largely deviate from regular inviscid pump flow theory. Computational Fluid Dynamics can be very helpful to extract information about which physical phenomena are involved in such flows. In this sense, this work performs a numerical study of the flow in a two-stage centrifugal pump (Imbil ITAP 65-330/2) with a vaned diffuser and a volute. The flow in the pump is modeled using the software Ansys CFX, by means of a multi-block, transient rotor-stator technique, with structured grids for all pump parts. The simulations were performed using water and a mixture of water and glycerin as work fluids. Several viscosities were considered, in a range between 87 and 720 cP. Comparisons between experimental data obtained by Amaral (2007) and numerical head curves showed a good agreement, with an average deviation of 6.8% for water. The behavior of velocity, pressure and turbulence kinetic energy fields was evaluated for several operational conditions. In general, the results obtained by this work achieved the proposed goals and are a significant contribution to the understanding of the flow studied.

Discontinuous Galerkin Methods for the Biharmonic Problem

This work is concerned with the design and analysis of hp-version discontinuous Galerkin (DG) finite element methods for boundary-value problems involving the biharmonic operator. The first part extends the unified approach of Arnold, Brezzi, Cockburn & Marini (SIAM J. Numer. Anal. 39, 5 (2001/02), 1749-1779) developed for the Poisson problem, to the design of DG methods via an appropriate choice of numerical flux functions for fourth order problems; as an example we retrieve the interior penalty DG method developed by Suli & Mozolevski (Comput. Methods Appl. Mech. Engrg. 196, 13-16 (2007), 1851-1863). The second part of this work is concerned with a new a-priori error analysis of the hp-version interior penalty DG method, when the error is measured in terms of both the energy-norm and L2-norm, as well certain linear functionals of the solution, for elemental polynomial degrees $p\ge 2$. Also, provided that the solution is piecewise analytic in an open neighbourhood of each element, exponential convergence is also proven for the p-version of the DG method. The sharpness of the theoretical developments is illustrated by numerical experiments.

A Mixed Discontinuous Galerkin Method for Incompressible Magnetohydrodynamics

We introduce and analyze a discontinuous Galerkin method for the numerical discretization of a stationary incompressible magnetohydrodynamics model problem. The fluid unknowns are discretized with inf-sup stable discontinuous P^3_{k}-P_{k-1} elements whereas the magnetic part of the equations is approximated by discontinuous P^3_{k}-P_{k+1} elements. We carry out a complete a-priori error analysis and prove that the energy norm error is convergent of order O(h^k) in the mesh size h. We also show that the method is able to correctly capture and resolve the strongest magnetic singularities in non-convex polyhedral domains. These results are verified in a series of numerical experiments.

Democratização do acesso ao ensino superior: os cursos de graduação à distância na UFRN

This thesis pursuits to contextualize the theoretical debate between the implementation of public education policy of the Federal Government focused in a distance learning and legal foundations for its enforcement, in order to raise questions and comments on the topic in question. Its importance is back to provide scientific input and can offer to the academy, particularly in the UFRN, and elements of society to question and rethink the complex relationship between the socio-economic and geographic access to higher education. It consists of a descriptive study on the institutionalization of distance education in UFRN as a mechanism for expanding access to higher education, for both, the research seeks to understand if the distance undergraduate courses offered by the UAB system and implemented at UFRN, promote expanding access to higher education, as it is during implementation that the rules, routines and social processes are converted from intentions to action. The discussion of this study lasted between two opposing views of Implementation models: Top-down and Bottom-up. It is worth noting that the documents PNE, PDE and programs and UAB MEETING reflect positively in improving the educational level of the population of the country It is a qualitative study, using the means Bibliographic, Document and Field Study, where they were performed 04 (four) in 2010 interviews with the management framework SEDIS / UAB in UFRN. The data were analyzed and addressed through techniques: Document Analysis and Content Analysis. The results show that the process of implementation of distance education at UFRN is in progress. According to our results, the research objective is achieved, but there was a need to rethink the conditions of the infrastructure of poles, the structure of the academic calendar, the management of the SEDIS UFRN, regarding the expansion of existing vacancies and the supply of new courses by the need for a redesign as the Secretariat's ability to hold the offerings of undergraduate courses offered by the Federal Government to be implemented in the institution. It was also found that levels of evasion still presents a challenge to the teaching model. Given the context, we concluded that the greatest contribution of UAB and consequently UFRN by distance learning for undergraduate courses (Bachelor in Mathematics, Physics, Chemistry, Geography and Biological Sciences, beyond the bachelor's degrees in Business and Public Administration ) is related to increasing the number of vacancies and accessibility of a population that was previously deprived of access to university

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products