Mapping of Submerged Aquatic Vegetation in Rivers From Very High Resolution Image Data, Using Object Based Image Analysis Combined with Expert Knowledge

The use of remote sensing for monitoring of submerged aquatic vegetation (SAV) in fluvial environments has been limited by the spatial and spectral resolution of available image data. The absorption of light in water also complicates the use of common image analysis methods. This paper presents the results of a study that uses very high resolution (VHR) image data, collected with a Near Infrared sensitive DSLR camera, to map the distribution of SAV species for three sites along the Desselse Nete, a lowland river in Flanders, Belgium. Plant species, including Ranunculus aquatilis L., Callitriche obtusangula Le Gall, Potamogeton natans L., Sparganium emersum L. and Potamogeton crispus L., were classified from the data using Object-Based Image Analysis (OBIA) and expert knowledge. A classification rule set based on a combination of both spectral and structural image variation (e.g. texture and shape) was developed for images from two sites. A comparison of the classifications with manually delineated ground truth maps resulted for both sites in 61% overall accuracy. Application of the rule set to a third validation image, resulted in 53% overall accuracy. These consistent results show promise for species level mapping in such biodiverse environments, but also prompt a discussion on assessment of classification accuracy.

Aplicação de um value stream map nos serviços após venda automóvel

O projeto desenvolvido tem como objetivo principal a melhoria da eficiência na prestação de serviços de reparação de chapa e pintura na Caetano Auto Colisão, através da aplicação de ferramentas associadas à filosofia Lean. Apesar das ferramentas e técnicas lean estarem bem exploradas nas empresas de produção e manufatura, o mesmo não se verifica em relação às empresas da área dos serviços. O Value Stream Mapping é uma ferramenta lean que consiste no mapeamento do fluxo de materiais e informação necessários para a realização das atividades (que acrescentam e não acrescentam valor), desempenhadas pelos colaboradores, fornecedores e distribuidores, desde a obtenção do pedido do cliente até à entrega final do serviço. Através desta ferramenta é possível identificar as atividades que não acrescentam valor para o processo e propor medidas de melhoria que resultem na eliminação ou redução das mesmas. Com base neste conceito, foi realizado o mapeamento do processo de prestação de serviços de chapa e pintura e identificados os focos de ineficiência. A partir desta análise foram sugeridas melhorias que têm como objetivo atingir o estado futuro proposto assim como tornar o processo mais eficiente. Duas destas melhorias passaram pela implementação dos 5S na sala das tintas e pela elaboração de um relatório A3 para o centro de lavagens. O projeto realizado permitiu o estudo de um problema real numa empresa de serviços, bem como a proposta de um conjunto de melhorias que a médio prazo se espera virem a contribuir para a melhoria da eficiência na prestação de serviços de chapa e pintura.

Tile-Based Two-Dimensional Phase Unwrapping for Digital Holography Using a Modular Framework

A variety of physical and biomedical imaging techniques, such as digital holography, interferometric synthetic aperture radar (InSAR), or magnetic resonance imaging (MRI) enable measurement of the phase of a physical quantity additionally to its amplitude. However, the phase can commonly only be measured modulo 2π, as a so called wrapped phase map. Phase unwrapping is the process of obtaining the underlying physical phase map from the wrapped phase. Tile-based phase unwrapping algorithms operate by first tessellating the phase map, then unwrapping individual tiles, and finally merging them to a continuous phase map. They can be implemented computationally efficiently and are robust to noise. However, they are prone to failure in the presence of phase residues or erroneous unwraps of single tiles. We tried to overcome these shortcomings by creating novel tile unwrapping and merging algorithms as well as creating a framework that allows to combine them in modular fashion. To increase the robustness of the tile unwrapping step, we implemented a model-based algorithm that makes efficient use of linear algebra to unwrap individual tiles. Furthermore, we adapted an established pixel-based unwrapping algorithm to create a quality guided tile merger. These original algorithms as well as previously existing ones were implemented in a modular phase unwrapping C++ framework. By examining different combinations of unwrapping and merging algorithms we compared our method to existing approaches. We could show that the appropriate choice of unwrapping and merging algorithms can significantly improve the unwrapped result in the presence of phase residues and noise. Beyond that, our modular framework allows for efficient design and test of new tile-based phase unwrapping algorithms. The software developed in this study is freely available.

Enhancing composite Digital Documents Using XML-based Standoff Markup

Document representations can rapidly become unwieldy if they try to encapsulate all possible document properties, ranging from abstract structure to detailed rendering and layout. We present a composite document approach wherein an XMLbased document representation is linked via a shadow tree of bi-directional pointers to a PDF representation of the same document. Using a two-window viewer any material selected in the PDF can be related back to the corresponding material in the XML, and vice versa. In this way the treatment of specialist material such as mathematics, music or chemistry (e.g. via read aloud or play aloud ) can be activated via standard tools working within the XML representation, rather than requiring that application-specific structures be embedded in the PDF itself. The problems of textual recognition and tree pattern matching between the two representations are discussed in detail. Comparisons are drawn between our use of a shadow tree of pointers to map between document representations and the use of a code-replacement shadow tree in technologies such as XBL.

Epidemiology and genetic architecture of blood pressure: a family based study of Generation Scotland

Hypertension is a major risk factor for cardiovascular disease and mortality, and a growing global public health concern, with up to one-third of the world’s population affected. Despite the vast amount of evidence for the benefits of blood pressure (BP) lowering accumulated to date, elevated BP is still the leading risk factor for disease and disability worldwide. It is well established that hypertension and BP are common complex traits, where multiple genetic and environmental factors contribute to BP variation. Furthermore, family and twin studies confirmed the genetic component of BP, with a heritability estimate in the range of 30-50%. Contemporary genomic tools enabling the genotyping of millions of genetic variants across the human genome in an efficient, reliable, and cost-effective manner, has transformed hypertension genetics research. This is accompanied by the presence of international consortia that have offered unprecedentedly large sample sizes for genome-wide association studies (GWASs). While GWAS for hypertension and BP have identified more than 60 loci, variants in these loci are associated with modest effects on BP and in aggregate can explain less than 3% of the variance in BP. The aims of this thesis are to study the genetic and environmental factors that influence BP and hypertension traits in the Scottish population, by performing several genetic epidemiological analyses. In the first part of this thesis, it aims to study the burden of hypertension in the Scottish population, along with assessing the familial aggregation and heritialbity of BP and hypertension traits. In the second part, it aims to validate the association of common SNPs reported in the large GWAS and to estimate the variance explained by these variants. In this thesis, comprehensive genetic epidemiology analyses were performed on Generation Scotland: Scottish Family Health Study (GS:SFHS), one of the largest population-based family design studies. The availability of clinical, biological samples, self-reported information, and medical records for study participants has allowed several assessments to be performed to evaluate factors that influence BP variation in the Scottish population. Of the 20,753 subjects genotyped in the study, a total of 18,470 individuals (grouped into 7,025 extended families) passed the stringent quality control (QC) criteria and were available for all subsequent analysis. Based on the BP-lowering treatment exposure sources, subjects were further classified into two groups. First, subjects with both a self-reported medications (SRMs) history and electronic-prescription records (EPRs; n =12,347); second, all the subjects with at least one medication history source (n =18,470). In the first group, the analysis showed a good concordance between SRMs and EPRs (kappa =71%), indicating that SRMs can be used as a surrogate to assess the exposure to BP-lowering medication in GS:SFHS participants. Although both sources suffer from some limitations, SRMs can be considered the best available source to estimate the drug exposure history in those without EPRs. The prevalence of hypertension was 40.8% with higher prevalence in men (46.3%) compared to women (35.8%). The prevalence of awareness, treatment and controlled hypertension as defined by the study definition were 25.3%, 31.2%, and 54.3%, respectively. These findings are lower than similar reported studies in other populations, with the exception of controlled hypertension prevalence, which can be considered better than other populations. Odds of hypertension were higher in men, obese or overweight individuals, people with a parental history of hypertension, and those living in the most deprived area of Scotland. On the other hand, deprivation was associated with higher odds of treatment, awareness and controlled hypertension, suggesting that people living in the most deprived area may have been receiving better quality of care, or have higher comorbidity levels requiring greater engagement with doctors. These findings highlight the need for further work to improve hypertension management in Scotland. The family design of GS:SFHS has allowed family-based analysis to be performed to assess the familial aggregation and heritability of BP and hypertension traits. The familial correlation of BP traits ranged from 0.07 to 0.20, and from 0.18 to 0.34 for parent-offspring pairs and sibling pairs, respectively. A higher correlation of BP traits was observed among first-degree relatives than other types of relative pairs. A variance-component model that was adjusted for sex, body mass index (BMI), age, and age-squared was used to estimate heritability of BP traits, which ranged from 24% to 32% with pulse pressure (PP) having the lowest estimates. The genetic correlation between BP traits showed a high correlation between systolic (SBP), diastolic (DBP) and mean arterial pressure (MAP) (G: 81% to 94%), but lower correlations with PP (G: 22% to 78%). The sibling recurrence risk ratio (λS) for hypertension and treatment were calculated as 1.60 and 2.04 respectively. These findings confirm the genetic components of BP traits in GS:SFHS, and justify further work to investigate genetic determinants of BP. Genetic variants reported in the recent large GWAS of BP traits were selected for genotyping in GS:SFHS using a custom designed TaqMan® OpenArray®. The genotyping plate included 44 single nucleotide polymorphisms (SNPs) that have been previously reported to be associated with BP or hypertension at genome-wide significance level. A linear mixed model that is adjusted for age, age-squared, sex, and BMI was used to test for the association between the genetic variants and BP traits. Of the 43 variants that passed the QC, 11 variants showed statistically significant association with at least one BP trait. The phenotypic variance explained by these variant for the four BP traits were 1.4%, 1.5%, 1.6%, and 0.8% for SBP, DBP, MAP, and PP, respectively. The association of genetic risk score (GRS) that were constructed from selected variants has showed a positive association with BP level and hypertension prevalence, with an average effect of one mmHg increase with each 0.80 unit increases in the GRS across the different BP traits. The impact of BP-lowering medication on the genetic association study for BP traits has been established, with typical practice of adding a fixed value (i.e. 15/10 mmHg) to the measured BP values to adjust for BP treatment. Using the subset of participants with the two treatment exposure sources (i.e. SRMs and EPRs), the influence of using either source to justify the addition of fixed values in SNP association signal was analysed. BP phenotypes derived from EPRs were considered the true phenotypes, and those derived from SRMs were considered less accurate, with some phenotypic noise. Comparing SNPs association signals between the four BP traits in the two model derived from the different adjustments showed that MAP was the least impacted by the phenotypic noise. This was suggested by identifying the same overlapped significant SNPs for the two models in the case of MAP, while other BP traits had some discrepancy between the two sources

Cloning of the ω-secalin gene family in a wheat 1BL/1RS translocation line using BAC clone sequencing

Background: Wheat 1BL/1RS translocation lines are planted around the world for their disease resistance and high yield. Most of them are poor in bread making, which is partially caused by ω-secalins that are encoded by the ω-secalin gene family, which is located on the short arm of rye chromosome 1R (1RS). However, information on the structure and evolution of the ω-secalin gene family is still limited. Results: We first generated a physicalmap of the ω-secalin gene family covering 195 kb of the Sec-1 locus based on sequencing three bacterial artificial chromosome (BAC) clones of the 1BL/1RS translocation wheat cultivar Shimai 15. A BAC contig was constructed spanning 168 kb of the Sec-1 locus on 1RS. Twelve ω-secalin genes were arranged in a head-to-tail fashion, separated by 8.2–21.6 kb spacers on the contig, whereas six other ω-secalin genes were arranged head-to-tail, separated by 8.2–8.4 kb of spacers on clone BAC125. The 18 ω-secalin genes can be classified into six types among which eight ω-secalin genes were expressed during seed development. The ω-secalin genes with the 1074-bp open reading frame (ORF) represented the main population. Except for two pseudogenes, the N-terminal of the ω-secalin gene was conserved, whereas variations in the C-terminal led to a change in ORF length. The spacers can be sorted into two classes. Class-1 spacers contained conserved and non-conservative sequences. Conclusion: The ω-secalin gene family consisted of at least 18 members in the 1BL/1RS translocation line cv. Shimai 15. Eight ω-secalin genes were expressed during seed development. Eighteen members may originate from a progenitor with a 1,074-bp ORF. The spacers differed in length and sequence conservation.

Hibridación in situ fluorescente (FISH)

Background: At the end of 80s, cloning technologies with the increase of the antibodies’ sensibility made easier the development of technologies based on Fluorescence in situ Hibridation (FISH). Nowadays, It’s widely used in the field of basic investigation as much as clinic diagnostic. Method: FISH is a technique that combines molecular biology with histochemistry way to detect specific nucleotide sequences so that chromosome’s section or even whole chromosome can be marked on metaphases cells (cell in division) and on attached cellular nucleus. This detection is realized using DNA fluorescence probes (marked with fluorophores), that can be different according to the structures manage to detect: large single-locus probes, small unique-sequence probes, chromosome- or region-specific “paints” or repetitive sequence probes and genomic DNA probes. Some of the applications of this technique is that can be so useful in the detection of numerical and structural chromosomal alterations such as polyploidies or genomic rearrangement, to mapping metaphases cells and even to detect bacteria or another type of microorganism. In addition, FISH allows us to monitoring diseases (antitumor therapies, quantification of genomic altered cells…) and the precise location of chromosomic broken spots on tumor searching for new genes involved in cancer and detect and map interested known genes. Conclusion: FISH has many advantages ahead of conventional cytogenetic techniques (bands G karyotype) overall at the time of establish a clinic diagnostic to detect tumors and chromosomic aberration, presenting a higher sensibility and specificity as well as being a relative quick technique (24 hours).

SARASOM: a supervised architecture based on the recurrent associative SOM

We present and evaluate a novel supervised recurrent neural network architecture, the SARASOM, based on the associative self-organizing map. The performance of the SARASOM is evaluated and compared with the Elman network as well as with a hidden Markov model (HMM) in a number of prediction tasks using sequences of letters, including some experiments with a reduced lexicon of 15 words. The results were very encouraging with the SARASOM learning better and performing with better accuracy than both the Elman network and the HMM.

A COMPARISON OF PIXEL-BASED VERSUS OBJECT ORIENTED ANALYSIS OF LANDSLIDES USING HISTORICAL REMOTE SENSING DATA

With recent advances in remote sensing processing technology, it has become more feasible to begin analysis of the enormous historic archive of remotely sensed data. This historical data provides valuable information on a wide variety of topics which can influence the lives of millions of people if processed correctly and in a timely manner. One such field of benefit is that of landslide mapping and inventory. This data provides a historical reference to those who live near high risk areas so future disasters may be avoided. In order to properly map landslides remotely, an optimum method must first be determined. Historically, mapping has been attempted using pixel based methods such as unsupervised and supervised classification. These methods are limited by their ability to only characterize an image spectrally based on single pixel values. This creates a result prone to false positives and often without meaningful objects created. Recently, several reliable methods of Object Oriented Analysis (OOA) have been developed which utilize a full range of spectral, spatial, textural, and contextual parameters to delineate regions of interest. A comparison of these two methods on a historical dataset of the landslide affected city of San Juan La Laguna, Guatemala has proven the benefits of OOA methods over those of unsupervised classification. Overall accuracies of 96.5% and 94.3% and F-score of 84.3% and 77.9% were achieved for OOA and unsupervised classification methods respectively. The greater difference in F-score is a result of the low precision values of unsupervised classification caused by poor false positive removal, the greatest shortcoming of this method.

Simple approximate MAP inference for Dirichlet processes mixtures

The Dirichlet process mixture model (DPMM) is a ubiquitous, flexible Bayesian nonparametric statistical model. However, full probabilistic inference in this model is analytically intractable, so that computationally intensive techniques such as Gibbs sampling are required. As a result, DPMM-based methods, which have considerable potential, are restricted to applications in which computational resources and time for inference is plentiful. For example, they would not be practical for digital signal processing on embedded hardware, where computational resources are at a serious premium. Here, we develop a simplified yet statistically rigorous approximate maximum a-posteriori (MAP) inference algorithm for DPMMs. This algorithm is as simple as DP-means clustering, solves the MAP problem as well as Gibbs sampling, while requiring only a fraction of the computational effort. (For freely available code that implements the MAP-DP algorithm for Gaussian mixtures see http://www.maxlittle.net/.) Unlike related small variance asymptotics (SVA), our method is non-degenerate and so inherits the “rich get richer” property of the Dirichlet process. It also retains a non-degenerate closed-form likelihood which enables out-of-sample calculations and the use of standard tools such as cross-validation. We illustrate the benefits of our algorithm on a range of examples and contrast it to variational, SVA and sampling approaches from both a computational complexity perspective as well as in terms of clustering performance. We demonstrate the wide applicabiity of our approach by presenting an approximate MAP inference method for the infinite hidden Markov model whose performance contrasts favorably with a recently proposed hybrid SVA approach. Similarly, we show how our algorithm can applied to a semiparametric mixed-effects regression model where the random effects distribution is modelled using an infinite mixture model, as used in longitudinal progression modelling in population health science. Finally, we propose directions for future research on approximate MAP inference in Bayesian nonparametrics.

Evolution of emerging iPS cell-based therapies for age-related macular degeneration (AMD)

Stem cell-based regenerative medicine is poised to revolutionize the way diseases are treated. In recent years, induced pluripotent stem (iPS) cells, a newly stem cell species, has attracted significant attention. This paper seeks to understand the pathways along which emerging clinical research efforts in the field of iPS cells is evolved. In particular, the empirical case of age-related macular degeneration (AMD) is used, which is the world-pioneering clinical application of iPS cells. In line with the literature, this study explores the interrelations between three different pathways, such as biomedical scientific understanding, development of medical technologies, and learning in clinical practice. For this, a techmining approach is used including co-term, co-citation, and direct citation methods. Scientific publications indexed in the Thomson Reuters' Web of Science and Elsevier's Scopus databases form the basis of the study. This research first explores the iPS cell research landscape through the construction of a co-term map, particularly stressing the location and intensity of disease-tackling efforts; then focus on the evolution of scientific knowledge on AMD through co-citation networks and the main path algorithm on direct citations. At the researcher level, the development of four different research groups working on cell therapies for AMD is evaluated through the software CitNetExplorer. By integrating these approaches, the result shows a wider picture of the complexities inherent in the translation of knowledge into revolutionary clinical methods.

The seismicity of Portugal and its adjacent Atlantic region from 1300 to 2014: Maximum Observed Intensity map (MOI)

In this study, we considered earthquakes with a maximum observed intensity (MOI) Io≥V that occurred throughout the Portuguese mainland and its adjacent Atlantic region to produce the map of maximum intensities of Portugal. This map is based on a wide variety of historical and recent sources, including 175 earthquakes, over the period of 1300–2014. This MOI map allows the regions of high, medium, and low levels of seismic hazard to be highlighted. The entirety of Portugal has been affected by major seismic events, some of which have caused serious damage. In addition, offshore earthquakes have had significant impacts on the coastal cities located in the central and southern regions of the country. Because the southern region of mainland Portugal is more active than the northern region, the largest concentrations of events with Io≥VI are in the southern region, especially on the mainland near the city of Évora, in the Lisbon region, in the Lower Tagus Valley region, and along the Algarve coast, especially in the southwest region in Cape of São Vicente and the Gorringe Bank.

Greening the city: an ecosystem-based framework to support planning towards urban sustainability and resilience

Cities are small-scale complex socio-ecological systems, that host around 60% of world population. Ecosystem Services (ES) provided by urban ecosystems offer multiple benefits necessary to cope with present and future urban challenges. These ES include microclimate regulation, runoff control, as well as opportunities for mental and physical recreation, affecting citizen’s health and wellbeing. Creating a balance between urban development, land take containment, climate adaptation and availability of Urban Green Areas and their related benefits, can improve the quality of the lives of the inhabitants, the economic performance of the city and the social justice and cohesion aspects. This work starts analysing current literature around the topic of Ecosystem Services (ES), Green and Blue Infrastructure (GBI) and Nature-based Solutions (NBS) and their integration within current European and International sustainability policies. Then, the thesis focuses on the role of ES, GBI and NBS towards urban sustainability and resilience setting the basis to build the core methodological and conceptual approach of this work. The developed ES-based conceptual approach provides guidance on how to map and assess ES, to better inform policy making and to give the proper value to ES within urban context. The proposed interdisciplinary approach navigates the topic of mapping and assessing ES benefits in terms of regulatory services, with a focus on climate mitigation and adaptation, and cultural services, to enhance wellbeing and justice in urban areas. Last, this thesis proposes a trans-disciplinary and participatory approach to build resilience over time around all relevant urban ES. The two case studies that will be presented in this dissertation, the city of Bologna and the city of Barcelona, have been used to implement, tailor and test the proposed conceptual framework, raising valuable inputs for planning, policies and science.

Characterization and cloning of chemically-induced mutants in barley (Hordeum vulgare L.)

Induced mutagenesis has been exploited for crop improvement and for investigating gene function and regulation. To unravel molecular mechanisms of stress resilience, we applied state-of-the-art genomics-based gene cloning methods to barley mutant lines showing altered root and shoot architecture and disease lesion mimic phenotypes. With a novel method that we named complementation by sequencing, we cloned NEC3, the causal gene for an orange-spotted disease lesion mimic phenotype. NEC3 belongs to the CYP71P1 gene family and it is involved in serotonin biosynthesis. By comparative phylogenetic analysis we showed that CYP71P1 emerged early in angiosperm evolution but was lost in some lineages including Arabidopsis thaliana. By BSA-Seq, we cloned the gene whose mutation increased leaf width, and we showed that the gene corresponded to the previously cloned BROADLEAF1. By BSA coupled to WGS sequencing, we cloned EGT1 and EGT2, two genes that regulate root gravitropic set point angle. EGT1 encodes a Tubby-like F-box protein and EGT2 encodes a Sterile Alpha Motive protein; EGT2 is phylogenetically related to AtSAM5 in Arabidopsis and to WEEP in peach where it regulates branch angle. Both EGT1 and EGT2 are conserved in wheat. We hypothesized that both participate to an anti-gravitropic offset mechanism since their disruption causes mutant roots to grow along the gravity vector. By the MutMap+ method, we cloned the causal gene of a short and semi-rigid root mutant and found that it encodes for an endoglucanase and is the ortholog of OsGLU3 in rice whose mutant has the same phenotype, suggesting that the gene is conserved in barley and rice. The mutants and the corresponding genes which were cloned in this work are involved in the response to stress and can potentially contribute to crop adaptation.

[almost An Autobiography: A Study Of Social Scientists In Health Based On The Lattes Curriculum].

Among the various ways of adopting the biographical approach, we used the curriculum vitaes (CVs) of Brazilian researchers who work as social scientists in health as our research material. These CVs are part of the Lattes Platform of CNPq - the National Council for Scientific and Technological Development, which includes Research and Institutional Directories. We analyzed 238 CVs for this study. The CVs contain, among other things, the following information: professional qualifications, activities and projects, academic production, participation in panels for the evaluation of theses and dissertations, research centers and laboratories and a summarized autobiography. In this work there is a brief review of the importance of autobiography for the social sciences, emphasizing the CV as a form of autobiographical practice. We highlight some results, such as it being a group consisting predominantly of women, graduates in social sciences, anthropology, sociology or political science, with postgraduate degrees. The highest concentration of social scientists is located in Brazil's southern and southeastern regions. In some institutions the main activities of social scientists are as teachers and researchers with great thematic diversity in research.