Redução da interferência de Brachiaria plantaginea (link) hitch. em milho através de capinas e aplicação de herbicidas em diferentes épocas

O rendimento de grãos de milho é afetado pela interferência com as plantas daninhas, que pode variar em função da eficiência e da época de realização do método de controle utilizado no manejo da cultura. O objetivo deste trabalho foi determinar os efeitos da aplicação de herbicidas e de capinas em diferentes épocas sobre o controle de plantas daninhas e o rendimento de grãos na cultura do milho. O experimento foi instalado no sistema convencional de preparo do solo em Eldorado do Sul (RS), no ano agrícola 1997/98. A espécie de planta daninha predominante na área experimental foi Brachiaria plantaginea (BRAPL), em infestação média de 285 plantas por m². Os tratamentos foram constituídos pela aplicação isolada, seqüencial ou em mistura em tanque, em diferentes doses e épocas, dos herbicidas atrazine, atrazine + óleo vegetal, metolachlor e nicosulfuron. Todos os tratamentos com herbicidas foram correspondidos por tratamentos em que se utilizou capina manual com início na mesma época de aplicação dos herbicidas. O controle realizado em pré-emergência ou no início do desenvolvimento da cultura proporcionou maior rendimento de grãos, mesmo com a diminuição do controle de BRAPL no final do ciclo. As aplicações seqüenciais de herbicidas proporcionaram maior rendimento de grãos do que as misturas em tanque. Os rendimentos de grãos obtidos com a aplicação de herbicidas nas diversas épocas não foram diferentes em relação às suas respectivas capinas.

Morfologia dos ovários, tubas uterinas e útero em catetos (Tayassu tajacu, Linnaeus, 1758) e queixadas (Tayassu pecari, Link, 1795)

Estudaram-se a morfologia externa, a sintopia e os dados métricos dos ovários, tubas uterinas e útero em 14 fêmeas adultas de cateto (12 adultas, uma prenhe e uma jovem) e em sete fêmeas de queixada (três jovens e quatro adultas), e o material, após fixação em solução aquosa de formol a 10%, foi dissecado. O material foi obtido na Universidade Federal de Uberlândia (UFU) - Campus Palotina e na Universidade Estadual Paulista - Campus de Ilha Solteira. Os ovários apresentaram-se ovalados e de superfície irregular, quando havia corpo lúteo ou folículo. As tubas uterinas mostraram-se longas, finas e enoveladas e terminando numa extremidade ovárica com fímbrias; a comunicação com o útero ocorreu de maneira contínua. Uma bolsa ovárica parcial, com um largo orifício, contém o ovário. O útero, bicórneo, apresentou um corpo curto e uma cérvix longa, com projeções anulares para o canal cervical, conferindo-lhe luz espiralada. Os cornos uterinos mostraram-se curtos, voltados ventralmente e em forma de hélice.

Vascularização dos ovários, tubas uterinas e útero em catetos (Tayassu tajacu, Linnaeus, 1758) e queixadas (Tayassu pecari, Link, 1795)

Estudou-se a vascularização arterial em nove fêmeas adultas de cateto, incluindo uma jovem e uma gestante, e em seis fêmeas de queixada (três jovens e três adultas). Para este estudo as artérias foram injetadas com solução de látex Neoprene 650 corado e após fixação de formol foram dissecadas. O material foi obtido na Universidade Federal de Uberlândia (UFU) - Campus Palotina e na Universidade Estadual Paulista - Campus de Ilha Solteira. As artérias responsáveis pela irrigação sangüínea dos ovários, tubas uterinas e útero são as artérias útero-ováricas, que emitem as artérias uterinas e ováricas, e as artérias vaginais, estando presentes em todas as amostras, porém variando suas origens. As artérias ováricas emitiram ramos para os ovários, tubas uterinas (ramos tubáricos) e extremidades craniais dos cornos uterinos (ramos tubo-uterinos) e as artérias uterinas enviaram ramos para os cornos uterinos, corpos uterinos e porções craniais da cérvix uterina. As artérias vaginais enviaram ramos para a cérvix e a vagina.

Automation and cybernetics: Control of a flexible one-link manipulator

States that control is of the essence in cybernetics. Summarizes the dynamic equations for a flexible one-link manipulator moving in the horizontal plane. Employs the finite element method, based on elementary beam theory, during the process of formulation. Develops and instruments a one-link flexible manipulator in order to control its vibration modes. Uses a simple second-order vibration model which permits vibrations on the rod to be estimated using the hub angle. The validation of the dynamic model and the structural analysis of the flexible manipulator is reached using proper infrared cameras and active light sources for determining actual positions of objects in space. Shows that the performance of the control is satisfactory, even under perturbation action.

Effect of Different Solvent Ratios (Water/Ethylene Glycol) on the Growth Process of CaMoO4 Crystals and Their Optical Properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rapid hamstrings/quadriceps strength capacity in professional soccer players with different conventional isokinetic muscle strength ratios

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resonant x-ray diffraction as a tool to calculate mixed valence ratios: Application to Prussian Blue materials

An approach is proposed here to calculate mixed valence ratios in molecular compounds. Synchrotron x-ray powder diffraction experiments were conducted to determine the Fe(+3)/Fe(+2) ratio in Prussian Blue compounds, which were elected as an example of the use of this approach. As a result, a resonant x-ray diffraction measurement provided direct evidence that the vacant [Fe(CN)(6)] group was randomly absent from similar to 31% of the structure, which was indicated by structural differences caused by variations in the anomalous dispersion term. These findings are very important for a deeper understanding of the changes occurring in properties during in situ compositional variations. (c) 2008 American Institute of Physics.

Taxonomic comments and an identification key to species for the Smooth-hound sharks genus Mustelus Link, 1790 (Chondrichthyes: Triakidae) from the Western South Atlantic.

Five species of smooth-hound sharks genus Mustelus (Family Triakidae) are know in the western South Atlantic, as follows: Mustelus canis (Mitchell 1815); Mustelus fasciatus (Garman 1913); Mustelus higmani Springer & Lowe 1963; Mustelus norrisi Springer 1939; and Mustelus schmitti Springer 1939. In the present paper, new data on the anatomy, morphometrics and meristic characters are given. Taxonomic aspects and comparison between the species are discussed. Most general body morphologic measurements and proportions are useless as a tool for species identification, since many of them show remarkable intraspecific variations. Head proportions and structures related seem to be a more adequate procedure to identify the species of Mustelus. The labial folds proportions, internasal distance and orbit diameter were the most useful character to separate the western South Atlantic species. The buccopharingeal pattern of denticles as well as tooth counts not was useful to distinguish the Mustelus species from western South Atlantic adequately, due great intraspecific variation.

Influence of Dietary Lysine Levels and Arginine:Lysine Ratios on Performance of Broilers Exposed to Heat or Cold Stress during the Period of Three to Six Weeks of Age

Four trials of identical experimental design were conducted to determine the effects of temperature, dietary Lys level, and dietary Arg:Lys ratios on performance and carcass yield of male broilers. Birds of a commercial strain were grown from 21 to 42 d of age in wire-floored finishing batteries placed in environmental chambers. The chambers were programmed to provide either a constant thermoneutral temperature (21.1 C), a constant cold temperature (15.5 C), or a cycling hot diurnal temperature (25.5 to 33.3 C). Within each environment there was a factorial arrangement of three Lys levels (1.0, 1.1, and 1.2%) with four Arg:Lys ratios (1.1:1, 1.2:1, 1.3:1, and 1.4:1). Environmental temperature significantly influenced virtually every characteristic examined. Hot cyclic temperatures reduced weight gain, feed intake, and breast meat yield, and increased feed conversion, dressing percentage, leg quarter yield, and abdominal fat content. The cold environment promoted increased feed intake and mortality. Ascites and cardiomyopathy were the leading causes of death under cold exposure and thermoneutral conditions, whereas complications arising from heat exposure were the main cause of death under hot cyclic conditions. Levels of Lys affected leg quarter yield and abdominal fat content over all environments but increased breast meat yield only under cold conditions. Increasing Arg: Lys ratios improved feed conversion and dressing percentage and reduced abdominal fat content; it could not be determined whether these responses were consistent with Arg per se or were due to a nonspecific N response. As increasing Lys levels or Arg:Lys ratios did not improve weight gain, increase breast meat yield, or attenuate adverse effects due to heat or cold exposure, it is concluded that the levels of Lys and Arg suggested for 21 to 42 d by the NRC are adequate for birds of this age under the environmental conditions encountered.

Geochemical Variability of the Rapakivi Itu Province, State of São Paulo, SE Brazil

This paper describes the chemical variability of the Late Precambrian Itu Rapakivi Province (IRP), State of São Paulo, SE Brazil, based on 187 selected analyses from the Itu, São Francisco, Sorocaba, Campina do Veado and Sguario/ Correa granites. The IRP has an almost uniform petrographic character conferred by the overall dominance of subalkaline biotite granites. Monzogranites (adamellites), granodiorites, quartz syenites, quartz monzonites are rare to very rare rock types and tonalites and quartz diorites are almost restricted to enclaves. Typical chemical features are the high FeO*/MgO ratio, a clustering of the K2O values between 4.5 and 6.0 wt.% and K2O/Na2O ratios which define the IRP as mildly potassic although more potassic rocks also occur. The overal Peacock Alkalinity Index is 54 defining the Province as alkali-calcic. In the Shand diagram the data cluster near the metaluminous/peraluminous boundary. Relationships between Nb, Rb and Y stress the within plate character of the IRP and the relationships between Rb, Ba and Sr reveal the importance of feldspar fractionation in magma evolution. The data also show an interbody and an intrabody chemical variability due to the variation in the composition of the crustal magma protoliths, as assigned by K/Rb relations. The presence of several magmatic cycles which built up the major intrusions reflects a magma ascent from collecting chambers successively drained and recharged, a feature in agreement with the clear link between the bodies and long lived, successively reactivated, transcurrent faults. Most of the chemical features of the IRP correspond to those of the classical Finnish rapakivi granites.

Amplitude ratios and the approach to bulk criticality in parallel plate geometries

We present analytical and numerical results for the specific heat and susceptibility amplitude ratios in parallel plate geometries. The results are derived using field-theoretic techniques suitable to describe the system in the bulk limit, i.e., (L/ξ±)≫ 1, where L is the distance between the plates and ξ± is the correlation length above (+) and below (-) the bulk critical temperature. Advantages and drawbacks of our method are discussed in the light of other approaches previously reported in the literature.

Opportunities for trade and investment between Latin America and Asia-Pacific: the link with APEC

Includes bibliography

The impact of fuse link manufacturers on arc flash energy

The traditional operational and hazard control paradigm of an electrical installation has several issues pertaining to the diversity of equipment. A large maintenance inventory is a reason for concern for any manager, but the arc flash hazard is a particularly new phenomenon and the effects of equipment diversity on this phenomenon are even newer. The class of arc hazard can be increased, simply by changing the fuse link or circuit breaker manufacturer. Management pressure to operate as well as non-standard practices and installations are also partly responsible. The aim of this study is to take a typical situation in an industrial plant and to statistically simulate, by means of a dedicated software program, the fuse arc flash interruption performance of various manufacturers. The purpose of this study is to obtain a more objective indication of the influence of different fuse link manufacturers on arc flash incident energy. © 2011 IEEE.

Using serial bluetooth converters as a sensor link in networked control systems

Networked control systems (NCS) are distributed control system in which sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks which enable interoperability between existing wired and wireless systems. This paper presents the feasibility analysis of using a serial RS-232 to Bluetooth converter as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the converter capabilities. In addition the control performance of an implemented motor control system using the converter is analyzed. Experimental results led to the conclusion that serial RS-232 Bluetooth converters can be used to implement wireless networked control systems (WNCS) providing transmission rates and closed control loop times which are acceptable for NCS applications. © 2011 IEEE.

Resonant (P+RES) controller applied to voltage source inverter with minimum DC link capacitor

Voltage source inverters use large electrolytic capacitors in order to decouple the energy between the utility and the load, keeping the DC link voltage constant. Decreasing the capacitance reduces the distortion in the inverter input current but this also affects the load with low-order harmonics and generate disturbances at the input voltage. This paper applies the P+RES controller to solve the challenge of regulating the output current by means of controlling the magnitude of the current space vector, keeping it constant thus rejecting harmonic disturbances that would otherwise propagate to the load. This work presents a discussion of the switching and control strategy. © 2011 IEEE.