Design of an expandable manufacturing simulator through the application of object-oriented principles

In analysing manufacturing systems, for either design or operational reasons, failure to account for the potentially significant dynamics could produce invalid results. There are many analysis techniques that can be used, however, simulation is unique in its ability to assess detailed, dynamic behaviour. The use of simulation to analyse manufacturing systems would therefore seem appropriate if not essential. Many simulation software products are available but their ease of use and scope of application vary greatly. This is illustrated at one extreme by simulators which offer rapid but limited application whilst at the other simulation languages which are extremely flexible but tedious to code. Given that a typical manufacturing engineer does not posses in depth programming and simulation skills then the use of simulators over simulation languages would seem a more appropriate choice. Whilst simulators offer ease of use their limited functionality may preclude their use in many applications. The construction of current simulators makes it difficult to amend or extend the functionality of the system to meet new challenges. Some simulators could even become obsolete as users, demand modelling functionality that reflects the latest manufacturing system design and operation concepts. This thesis examines the deficiencies in current simulation tools and considers whether they can be overcome by the application of object-oriented principles. Object-oriented techniques have gained in popularity in recent years and are seen as having the potential to overcome any of the problems traditionally associated with software construction. There are a number of key concepts that are exploited in the work described in this thesis: the use of object-oriented techniques to act as a framework for abstracting engineering concepts into a simulation tool and the ability to reuse and extend object-oriented software. It is argued that current object-oriented simulation tools are deficient and that in designing such tools, object -oriented techniques should be used not just for the creation of individual simulation objects but for the creation of the complete software. This results in the ability to construct an easy to use simulator that is not limited by its initial functionality. The thesis presents the design of an object-oriented data driven simulator which can be freely extended. Discussion and work is focused on discrete parts manufacture. The system developed retains the ease of use typical of data driven simulators. Whilst removing any limitation on its potential range of applications. Reference is given to additions made to the simulator by other developers not involved in the original software development. Particular emphasis is put on the requirements of the manufacturing engineer and the need for Ihe engineer to carrv out dynamic evaluations.

INTAMAP: the design and implementation of an interoperable automated interpolation web service

INTAMAP is a Web Processing Service for the automatic spatial interpolation of measured point data. Requirements were (i) using open standards for spatial data such as developed in the context of the Open Geospatial Consortium (OGC), (ii) using a suitable environment for statistical modelling and computation, and (iii) producing an integrated, open source solution. The system couples an open-source Web Processing Service (developed by 52°North), accepting data in the form of standardised XML documents (conforming to the OGC Observations and Measurements standard) with a computing back-end realised in the R statistical environment. The probability distribution of interpolation errors is encoded with UncertML, a markup language designed to encode uncertain data. Automatic interpolation needs to be useful for a wide range of applications and the algorithms have been designed to cope with anisotropy, extreme values, and data with known error distributions. Besides a fully automatic mode, the system can be used with different levels of user control over the interpolation process.

State-of-the-art in product-service systems

A Product-Service System (PSS) is an integrated combination of products and services. This Western concept embraces a service-led competitive strategy, environmental sustainability, and the basis to differentiate from competitors who simply offer lower priced products. This paper aims to report the state-of-the-art of PSS research by presenting a clinical review of literature currently available on this topic. The literature is classified and the major outcomes of each study are addressed and analysed. On this basis, this paper defines the PSS concept, reports on its origin and features, gives examples of applications along with potential benefits and barriers to adoption, summarizes available tools and methodologies, and identifies future research challenges.

Speech recognition use in healthcare applications

Speech recognition technology is regarded as a key enabler for increasing the usability of applications deployed on mobile devices -- devices which are becoming increasingly prevalent in modern hospital-based healthcare. Although the use of speech recognition is not new to the hospital-based healthcare domain, its use with mobile devices has thus far been limited. This paper presents the results of a literature review we conducted in order to observe the manner in which speech recognition technology has been used in hospital-based healthcare and to gain an understanding of how this technology is being evaluated, in terms of its dependability and reliability, in healthcare settings. Our intent is that this review will help identify scope for future uses of speech recognition technologies in the healthcare domain, as well as to identify implications for the meaningful evaluation of such technologies given the specific context of use.

Preparation of particle-stabilized emulsions using membrane emulsification

There is currently significant interest in particle-stabilized emulsions for a variety of applications and as precursors to other materials such as micro-capsules or colloidosomes. A prerequisite for many applications is the ability to produce stable droplets with a well-controlled size. The preparation of oil-in-water (o/w) emulsions stabilized by silica colloids has been demonstrated here using membrane ulsification techniques. Emulsions were produced using both a cross-flow membrane device and a rotating membrane reactor. Under the correct conditions, highly stable emulsions with very narrow droplet size distributions can be produced. Investigations into the effects of changing the cross-flow shear rate at a fixed droplet production rate illustrate the fine control over mean droplet size that is possible with these emulsification techniques. Evidence for the importance of particle adsorption kinetics onto growing droplets prior to detachment from the membrane surface was obtained by varying the droplet production rate under fixed shear conditions. The presence of a critical surface coverage by the stabilizing particles to prevent droplet coalescence was clearly seen. Comparison with samples produced using conventional high-shear homogenization highlights the improved control over size distribution available from these membrane techniques.

Speech recognition use in healthcare applications

Speech recognition technology is regarded as a key enabler for increasing the usability of applications deployed on mobile devices -- devices which are becoming increasingly prevalent in modern hospital-based healthcare. Although the use of speech recognition is not new to the hospital-based healthcare domain, its use with mobile devices has thus far been limited. This paper presents the results of a literature review we conducted in order to observe the manner in which speech recognition technology has been used in hospital-based healthcare and to gain an understanding of how this technology is being evaluated, in terms of its dependability and reliability, in healthcare settings. Our intent is that this review will help identify scope for future uses of speech recognition technologies in the healthcare domain, as well as to identify implications for the meaningful evaluation of such technologies given the specific context of use.

Mobile note taking:investigating the efficacy of mobile text entry

When designing interaction techniques for mobile devices we must ensure users are able to safely navigate through their physical environment while interacting with their mobile device. Non-speech audio has proven effective at improving interaction on mobile devices by allowing users to maintain visual focus on environmental navigation while presenting information to them via their audio channel. The research described here builds on this to create an audio-enhanced single-stroke-based text entry facility that demands as little visual resource as possible. An evaluation of the system demonstrated that users were more aware of their errors when dynamically guided by audio-feedback. The study also highlighted the effect of handwriting style and mobility on text entry; designers of handwriting recognizers and of applications involving mobile note taking can use this fundamental knowledge to further develop their systems to better support the mobility of mobile text entry.

Determination of excitation profile and dielectric function spatial nonuniformity in porous silicon by using WKB approach

We develop an analytical model based on the WKB approach to evaluate the experimental results of the femtosecond pump-probe measurements of the transmittance and reflectance obtained on thin membranes of porous silicon. The model allows us to retrieve a pump-induced nonuniform complex dielectric function change along the membrane depth. We show that the model fitting to the experimental data requires a minimal number of fitting parameters while still complying with the restriction imposed by the Kramers-Kronig relation. The developed model has a broad range of applications for experimental data analysis and practical implementation in the design of devices involving a spatially nonuniform dielectric function, such as in biosensing, wave-guiding, solar energy harvesting, photonics and electro-optical devices.

Adaptive control of hybrid battery energy storage systems under capacity fade

There is an increasing call for applications which use a mixture of batteries. These hybrid battery solutions may contain different battery types for example; using second life ex-transportation batteries in grid support applications or a combination of high power, low energy and low power, high energy batteries to meet multiple energy requirements or even the same battery types but under different states of health for example, being able to hot swap out a battery when it has failed in an application without changing all the batteries and ending up with batteries with different performances, capacities and impedances. These types of applications typically use multi-modular converters to allow hot swapping to take place without affecting the overall performance of the system. A key element of the control is how the different battery performance characteristics may be taken into account and the how the power is then shared among the different batteries in line with their performance. This paper proposes a control strategy which allows the power in the batteries to be effectively distributed even under capacity fade conditions using adaptive power sharing strategy. This strategy is then validated against a system of three different battery types connected to a multi-modular converter both with and without capacity fade mechanisms in place.

Architecture of Extensible Computations Driven Systems

Никола Вълчанов, Тодорка Терзиева, Владимир Шкуртов, Антон Илиев - Една от основните области на приложения на компютърната информатика е автоматизирането на математическите изчисления. Информационните системи покриват различни области като счетоводство, електронно обучение/тестване, симулационни среди и т. н. Те работят с изчислителни библиотеки, които са специфични за обхвата на системата. Въпреки, че такива системи са перфектни и работят безпогрешно, ако не се поддържат остаряват. В тази работа описваме механизъм, който използва динамично библиотеките за изчисления и взема решение по време на изпълнение (интелигентно или интерактивно) за това как и кога те да се използват. Целта на тази статия е представяне на архитектура за системи, управлявани от изчисления. Тя се фокусира върху ползите от използването на правилните шаблони за дизайн с цел да се осигури разширяемост и намаляване на сложността.

Mobile Applications for Cultural and Historical Places

A review of free applications of smartphones working under the operation system of Android is made in the paper. The applications present users information about historical and cultural places of interest at travelling. There are three main groups of applications subject of discussion in the paper – world, national and regional. Their abilities, positive and negative characteristics are compares and described. A conclusion can be made that there is a necessity of new application that presents tourists detailed information about the Old capital of Bulgaria.

Making sense of microposts (#MSM2013) concept extraction challenge

Microposts are small fragments of social media content that have been published using a lightweight paradigm (e.g. Tweets, Facebook likes, foursquare check-ins). Microposts have been used for a variety of applications (e.g., sentiment analysis, opinion mining, trend analysis), by gleaning useful information, often using third-party concept extraction tools. There has been very large uptake of such tools in the last few years, along with the creation and adoption of new methods for concept extraction. However, the evaluation of such efforts has been largely consigned to document corpora (e.g. news articles), questioning the suitability of concept extraction tools and methods for Micropost data. This report describes the Making Sense of Microposts Workshop (#MSM2013) Concept Extraction Challenge, hosted in conjunction with the 2013 World Wide Web conference (WWW'13). The Challenge dataset comprised a manually annotated training corpus of Microposts and an unlabelled test corpus. Participants were set the task of engineering a concept extraction system for a defined set of concepts. Out of a total of 22 complete submissions 13 were accepted for presentation at the workshop; the submissions covered methods ranging from sequence mining algorithms for attribute extraction to part-of-speech tagging for Micropost cleaning and rule-based and discriminative models for token classification. In this report we describe the evaluation process and explain the performance of different approaches in different contexts.

On modeling and satisfaction of non-functional requirements using cloud computing

Specification of the non-functional requirements of applications and determining the required resources for their execution are activities that demand a great deal of technical knowledge, frequently resulting in an inefficient use of resources. Cloud computing is an alternative for provisioning of resources, which can be done using either the provider's own infrastructure or the infrastructure of one or more public clouds, or even a combination of both. It enables more flexibly/elastic use of resources, but does not solve the specification problem. In this paper we present an approach that uses models at runtime to facilitate the specification of non-functional requirements and resources, aiming to facilitate dynamic support for application execution in cloud computing environments with shared resources. © 2013 IEEE.

Do manufacturing firms need informality in ERP post-implementation? A study of Chinese manufacturing sites

Purpose - Enterprise resource planning (ERP) systems are limited due to their operation around a fixed design production process and a fixed lead time to production plan and purchasing plan. The purpose of this paper is to define the concept of informality and to describe the notion of a system combining informality and ERP systems, based on empirical research from four manufacturing case studies. Design/methodology/approach - The case studies present a range of applications of ERP and are analysed in terms of the three characteristics of informality, namely, organisation structure, communication method and leadership approach. Findings - The findings suggest that systems consisting of informality in combination with ERP systems can elicit knowledge fromfrontlineworkers leading to timely improvements in the system. This is achieved by allowing users to modify work procedures or production orders, and to support collaborative working among all employees. However it was found that informality is not required for manufacturers with a relatively stable environment who can deal with uncertainty with a proactive strategy. Research limitations/implications - This study was carried out in China, with four companies as unit of analysis. Future work can help to extend this study across countries. Originality/value - The use of Four dimensions of informality that relate to manufacturers implementing ERP are defined as "technology in practice", "user flexibility", "trusted human networks" and "positive reaction to uncertainty". This is a new construct not applied before to ERP implementations.

Insights into the influence of solvent polarity on the crystallization of poly(ethylene oxide) spin-coated thin films via in situ grazing incidence wide-angle X-ray scattering

Controlling polymer thin-film morphology and crystallinity is crucial for a wide range of applications, particularly in thin-film organic electronic devices. In this work, the crystallization behavior of a model polymer, poly(ethylene oxide) (PEO), during spin-coating is studied. PEO films were spun-cast from solvents possessing different polarities (chloroform, THF, and methanol) and probed via in situ grazing incidence wide-angle X-ray scattering. The crystallization behavior was found to follow the solvent polarity order (where chloroform < THF < methanol) rather than the solubility order (where THF > chloroform > methanol). When spun-cast from nonpolar chloroform, crystallization largely followed Avrami kinetics, resulting in the formation of morphologies comprising large spherulites. PEO solutions cast from more polar solvents (THF and methanol) do not form well-defined highly crystalline morphologies and are largely amorphous with the presence of small crystalline regions. The difference in morphological development of PEO spun-cast from polar solvents is attributed to clustering phenomena that inhibit polymer crystallization. This work highlights the importance of considering individual components of polymer solubility, rather than simple total solubility, when designing processing routes for the generation of morphologies with optimum crystallinities or morphologies.