Beyond the Transatlantic Divide: The Multiple Authorities of Standards in the Global Political Economy of Services

This paper explores the plurality of institutional environments in which standards for the service sector are expected to support the rise of a global knowledge-based economy. Despite the careful wording of the World Trade Organization (WTO), a whole range of international bodies still have the capacity to define technical specifications affecting how services are expected to be traded on worldwide basis. The analysis relies on global political economy approaches to extend to the area of service standards the assumption that the process of globalization is not opposing states and markets, but a joint expression of both of them including new patterns and agents of structural change through formal and informal power and regulatory practices. It analyses on a cross-institutional basis patterns of authority in the institutional setting of service standards in the context of the International Organisation for Standardisation (ISO), the European Union, and the United States. In contrast to conventional views opposing the American system to the ISO/European framework, the paper questions the robustness of this opposition by showing that institutional developments of service standards are likely to face trade-offs and compromises across those systems and between two opposing models of standardisation.

International exercise on 124Sb activity measurements.

An international exercise, registered as EUROMET project no. 907, was launched to measure both the activity of a solution of (124)Sb and the photon emission intensities of its decay. The same solution was sent by LNE-LNHB to eight participating laboratories. In order to identify possible biases, the participants were asked to use all possible activity measurement methods available in their laboratory and then to determine their reference value for comparison. Thus, measurement results from 4pibeta-gamma coincidence/anti-coincidence counting, CIEMAT/NIST liquid-scintillation counting, 4pigamma counting with well-type ionization chambers and well-type crystal detectors were given. The results are compared and show a maximum discrepancy of about 1.6%: possible explanations are proposed.

Nutrient patterns and their food sources in an International Study Setting: report from the EPIC study.

BACKGROUND Compared to food patterns, nutrient patterns have been rarely used particularly at international level. We studied, in the context of a multi-center study with heterogeneous data, the methodological challenges regarding pattern analyses. METHODOLOGY/PRINCIPAL FINDINGS We identified nutrient patterns from food frequency questionnaires (FFQ) in the European Prospective Investigation into Cancer and Nutrition (EPIC) Study and used 24-hour dietary recall (24-HDR) data to validate and describe the nutrient patterns and their related food sources. Associations between lifestyle factors and the nutrient patterns were also examined. Principal component analysis (PCA) was applied on 23 nutrients derived from country-specific FFQ combining data from all EPIC centers (N = 477,312). Harmonized 24-HDRs available for a representative sample of the EPIC populations (N = 34,436) provided accurate mean group estimates of nutrients and foods by quintiles of pattern scores, presented graphically. An overall PCA combining all data captured a good proportion of the variance explained in each EPIC center. Four nutrient patterns were identified explaining 67% of the total variance: Principle component (PC) 1 was characterized by a high contribution of nutrients from plant food sources and a low contribution of nutrients from animal food sources; PC2 by a high contribution of micro-nutrients and proteins; PC3 was characterized by polyunsaturated fatty acids and vitamin D; PC4 was characterized by calcium, proteins, riboflavin, and phosphorus. The nutrients with high loadings on a particular pattern as derived from country-specific FFQ also showed high deviations in their mean EPIC intakes by quintiles of pattern scores when estimated from 24-HDR. Center and energy intake explained most of the variability in pattern scores. CONCLUSION/SIGNIFICANCE The use of 24-HDR enabled internal validation and facilitated the interpretation of the nutrient patterns derived from FFQs in term of food sources. These outcomes open research opportunities and perspectives of using nutrient patterns in future studies particularly at international level.

Adaptation of AHRQ patient safety indicators for use in ICD-10 administrative data by an international consortium.

Objective: The Agency for Healthcare Research and Quality (AHRQ) developed Patient Safety Indicators (PSIs) for use with ICD-9-CM data. Many countries have adopted ICD-10 for coding hospital diagnoses. We conducted this study to develop an internationally harmonized ICD-10 coding algorithm for the AHRQ PSIs. Methods: The AHRQ PSI Version 2.1 has been translated into ICD-10-AM (Australian Modification), and PSI Version 3.0a has been independently translated into ICD-10-GM (German Modification). We converted these two country-specific coding algorithms into ICD-10-WHO (World Health Organization version) and combined them to form one master list. Members of an international expert panel-including physicians, professional medical coders, disease classification specialists, health services researchers, epidemiologists, and users of the PSI-independently evaluated this master list and rated each code as either "include," "exclude," or "uncertain," following the AHRQ PSI definitions. After summarizing the independent rating results, we held a face-to-face meeting to discuss codes for which there was no unanimous consensus and newly proposed codes. A modified Delphi method was employed to generate a final ICD-10 WHO coding list. Results: Of 20 PSIs, 15 that were based mainly on diagnosis codes were selected for translation. At the meeting, panelists discussed 794 codes for which consensus had not been achieved and 2,541 additional codes that were proposed by individual panelists for consideration prior to the meeting. Three documents were generated: a PSI ICD-10-WHO version-coding list, a list of issues for consideration on certain AHRQ PSIs and ICD-9-CM codes, and a recommendation to WHO to improve specification of some disease classifications. Conclusion: An ICD-10-WHO PSI coding list has been developed and structured in a manner similar to the AHRQ manual. Although face validity of the list has been ensured through a rigorous expert panel assessment, its true validity and applicability should be assessed internationally.

Protocol of the COSMIN study: consensus-based standards for the selection of health measurement instruments

Background: Choosing an adequate measurement instrument depends on the proposed use of the instrument, the concept to be measured, the measurement properties (e.g. internal consistency, reproducibility, content and construct validity, responsiveness, and interpretability), the requirements, the burden for subjects, and costs of the available instruments. As far as measurement properties are concerned, there are no sufficiently specific standards for the evaluation of measurement properties of instruments to measure health status, and also no explicit criteria for what constitutes good measurement properties. In this paper we describe the protocol for the COSMIN study, the objective of which is to develop a checklist that contains COnsensus-based Standards for the selection of health Measurement INstruments, including explicit criteria for satisfying these standards. We will focus on evaluative health related patient-reported outcomes (HR-PROs), i.e. patient-reported health measurement instruments used in a longitudinal design as an outcome measure, excluding health care related PROs, such as satisfaction with care or adherence. The COSMIN standards will be made available in the form of an easily applicable checklist.Method: An international Delphi study will be performed to reach consensus on which and how measurement properties should be assessed, and on criteria for good measurement properties. Two sources of input will be used for the Delphi study: (1) a systematic review of properties, standards and criteria of measurement properties found in systematic reviews of measurement instruments, and (2) an additional literature search of methodological articles presenting a comprehensive checklist of standards and criteria. The Delphi study will consist of four (written) Delphi rounds, with approximately 30 expert panel members with different backgrounds in clinical medicine, biostatistics, psychology, and epidemiology. The final checklist will subsequently be field-tested by assessing the inter-rater reproducibility of the checklist.Discussion: Since the study will mainly be anonymous, problems that are commonly encountered in face-to-face group meetings, such as the dominance of certain persons in the communication process, will be avoided. By performing a Delphi study and involving many experts, the likelihood that the checklist will have sufficient credibility to be accepted and implemented will increase.

The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis.

OBJECTIVE: To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables. METHODS: Thirty-seven experienced pediatric rheumatologists from 27 countries achieved consensus on 128 difficult patient profiles as clinically improved or not improved using a stepwise approach (patient's rating, statistical analysis, definition selection). Using the physicians' consensus ratings as the "gold standard measure," chi-square, sensitivity, specificity, false-positive and-negative rates, area under the receiver operating characteristic curve, and kappa agreement for candidate definitions of improvement were calculated. Definitions with kappa values >0.8 were multiplied by the face validity score to select the top definitions. RESULTS: The top definition of improvement was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 1 of the remaining worsening by more than 30%, which cannot be muscle strength. The second-highest scoring definition was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 2 of the remaining worsening by more than 25%, which cannot be muscle strength (definition P1 selected by the International Myositis Assessment and Clinical Studies group). The third is similar to the second with the maximum amount of worsening set to 30%. This indicates convergent validity of the process. CONCLUSION: We propose a provisional data-driven definition of improvement that reflects well the consensus rating of experienced clinicians, which incorporates clinically meaningful change in core set variables in a composite end point for the evaluation of global response to therapy in juvenile DM.

Assessing the Political Viability of Labour Market Reform: The Case of Employment Protection

We analyze the political support for employment protection legislation. Unlike my previous work on the same topic, this paper pays a lot of attention to the role of obsolescence in the growth process. In voting in favour of employment protection, incumbent employees trade off lower living standards (because employment protection maintains workers in less productive activities) against longer job duration. The support for employment protection will then depend on the value of the latter relative to the cost of the former. We highlight two key deeterminants of this trade-off: first, the workers' bargaining power, second, the economy's growth rate-more precisely its rate of creative destruction.

Labour Market Formation Patterns in Nineteenth Century Catalonia

In this paper we portray the features of the Catalan textiles labour market in a period of technological change. Supply and demand for labour as well as a gendered view of living standards are presented. A first set of results is that labour supply adjusts to changes in labour demand trough the spread of new demographic attitudes. In this respect we imply that labour economic agents (or labour population) were able to modify the economic condition of their children. A second set of results refers to living standards and income distribution inequality. In this respect we see that unemployment and protectionism were the main sources breeding income inequality. A third set of results deals with the extreme labour market segmentation according to gender. Since women s real wages did not obey to an economic rationale we conclude that women were outside the labour market.

Employment Protection, International Specialization, and Innovation

We develop a model to analyse the implications of firing costs on incentives for R&D and international specialization. The Key idea is paying the firing cost, the country with a rigid labor market will tend to produce relatively secure goods, at a late stage of their product life cycle. Under international trade, an international product cycle emerges where, roughly, new goods are first produced in the low firing cost country will specialize in 'secondary innovations', that is, improvements in existing goods, while the low firing cost country will more specialize in 'primary innovation', that is, invention of new goods.

Are Standards Always Protectionist?

We analyze the effects of a domestic standard that reduces an externality associated with the consumption of the good targeted by the standard, using a model in which foreign and domestic producers compete in the domestic good market. Producers can reduce expected damage associated with the externality by incurring a cost that varies by source of origin. Despite potential protectionism, the standard is useful in correcting the consumption externality in the domestic country. Protectionism occurs when the welfare-maximizing domestic standard is higher than the international standard maximizing welfare inclusive of foreign profits. The standard is actually anti-protectionist when foreign producers are much more efficient at addressing the externality than are domestic producers. Possible exclusion of domestic or foreign producers arises with large standards, which may alter the classification of a standard as protectionist or non-protectionist. The paper provides important implications for the estimation and use of tariff equivalents of nontariff barriers.

Research joint ventures in an international economy

D'Aspremont and Jacquemin's (1988) model is extended to studyalternative configurations of research agreements in a two--country integratedworld economy. Under unambiguous conditions on spillovers we show that:1) Allowing national firms to cooperate in R\&D confers them an advantageover foreign rivals, an effect similar to R\&D subsidies. 2) In a policygame, each government would allow national cooperative agreements. 3) Contraryto other trade policies which lead to a ``prisoners' dilemma'' result,welfare in both countries increases when they both allow R\&D cooperation.4) Welfare is even higher if a generalized (international) coalition isformed.

The international development of the RGHQoL: a quality of life measure for recurrent genital herpes.

This paper describes the international development and psychometric testing of the Recurrent Genital Herpes Quality of Life Questionnaire (RGHQoL), a condition-specific quality of life (QoL) instrument. The theoretical foundation for the measure is the needs-based model of QoL and the content of the instrument was derived from in-depth qualitative interviews with relevant patients in the UK. Versions of the RGHQoL were required for the UK, USA, Italy, Germany, France and Denmark for use in international clinical trials. The results indicate that the final 20 item measure has good reliability, internal consistency and validity for all language versions. A small responsiveness study in Denmark suggested that the measure is sensitive to changes in QoL associated with the initiation of suppression treatment for recurrent genital herpes (RGH). It is concluded that the RGHQoL is a valuable instrument for inclusion in clinical trials. The psychometric properties of the instrument are such that it may also be used to monitor the progress of individual patients.

Employment protection, international specialization and innovation

We develop a model to analyse the implications of firing costs on incentivesfor R&D and international specialization. The Key idea is paying the firingcost, the country with a rigid labor market will tend to produce relativelysecure goods, at a late stage of their product life cycle.Under international trade, an international product cycle emerges where,roughly, new goods are first produced in the low firing cost country willspecialize in 'secondary innovations', that is, improvements in existinggoods, while the low firing cost country will more specialize in 'primaryinnovation', that is, invention of new goods.

Setting standards: Information accumulation in development

We propose a model in which economic relations and institutions in advancedand less developed economies differ as these societies have access to different amounts of information. This lack of information makes it hard to give the right incentives to managers and entrepreneurs. We argue that differences in the amount of information arise because of the differences in the scale of activities in rich and poor economies; namely, there is too little repetition of similar activities in pooreconomies, thus insufficient information to set the appropriate standards for firm performance. Our model predicts a number of institutional and structural transformations as the economy accumulates capital and information.

The policy relevance of wear emissions from road transport, now and in the future : an international workshop report and consensus statement

Road transport emissions are a major contributor to ambient particulate matter concentrations and have been associated with adverse health effects. Therefore, these emissions are targeted through increasingly stringent European emission standards. These policies succeed in reducing exhaust emissions, but do not address "nonexhaust" emissions from brake wear, tire wear, road wear, and suspension in air of road dust. Is this a problem? To what extent do nonexhaust emissions contribute to ambient concentrations of PM10 or PM2.5? In the near future, wear emissions may dominate the remaining traffic-related PM10 emissions in Europe, mostly due to the steep decrease in PM exhaust emissions. This underlines the need to determine the relevance of the wear emissions as a contribution to the existing ambient PM concentrations, and the need to assess the health risks related to wear particles, which has not yet received much attention. During a workshop in 2011, available knowledge was reported and evaluated so as to draw conclusions on the relevance of traffic-related wear emissions for air quality policy development. On the basis of available evidence, which is briefly presented in this paper, it was concluded that nonexhaust emissions and in particular suspension in air of road dust are major contributors to exceedances at street locations of the PM10 air quality standards in various European cities. Furthermore, wear-related PM emissions that contain high concentrations of metals may (despite their limited contribution to the mass of nonexhaust emissions) cause significant health risks for the population, especially those living near intensely trafficked locations. To quantify the existing health risks, targeted research is required on wear emissions, their dispersion in urban areas, population exposure, and its effects on health. Such information will be crucial for environmental policymakers as an input for discussions on the need to develop control strategies.