Como planificar de acordo com as caraterísticas e necessidades dos diferentes contextos, nomeadamente no que concerne à heterogeneidade das crianças e dos respetivos grupos

Relatório de estágio para a obtenção do grau de mestre na especialidade profissional de Educação pré-escolar

Modelling of Stress-Corrosion Cracking by Using Peridynamics

Acknowledgement The authors are grateful to Prof. Siegfried Schmauder and Prof. Erdogan Madenci for the useful discussions that occurred throughout the realization of this study and acknowledge the Defence Science and Technology Laboratory (DSTL) for the financial support. A special thanks go to the anonymous reviewers, whose time and contribution have been highly appreciated. Results were obtained using the EPSRC funded ARCHIE-WeSt High Performance Computer (www.archie-west.ac.uk). EPSRC grant no. EP/K000586/1.

Stable carbon and oxygen isotope record of foraminifera from DSDP Hole 30-289

Sediments accumulate on the sea floor far from land with rates of a few millimetres to a few centimetres per thousand years. Sediments have been accumulating under broadly similar conditions, subject to similar controls, for the past 10 8 years and more. In principle we should be able to study the distribution of climatic variance with frequencies over the range 10**-3 to 10**-7 cycles per year with comparative ease. In fact, nearly all our data are heavily weighted towards the youngest part of the geological record. We study frequencies higher than 10**-4 cycles per year in the special case of a Pleistocene interglacial (the present one), and frequencies in the range 10**-4 to 10**-5 cycles per year in the special case of an ice-age. Although these may be of more direct interest to mankind than earlier periods, it may well be that we will understand the causes of climatic variability better if we can examine their operation over a longer time scale and under different boundary conditions. Rather than review the available data, I have collected some new data to show the feasibility of gathering a data base for examining climatic variability without this usual bias toward the recent. The most widely applicable tool for extracting climatic information from deep-sea sediments is oxygen isotope analysis of calcium carbonate microfossils. It is generally possible to select from the sediment both specimens of benthonic Foraminifera (that is, those that lived in ocean deep water at the sediment-water interface) and specimens of planktonic Foraminifera (that is, those that lived and formed their shells near the ocean surface, and fell to the sediment after death). Thus one is able to monitor conditions at the surface and at depth at simultaneous moments in the geological past. The necessity to analyse calcareous microfossils restricts investigation to calcareous sediments, but even with this restriction in sediment type there are many factors governing the rate of sediment accumulation. On a global scale, sediment accumulates so as to balance the input to the oceans from continental erosion. Even when averaged globally, long-term accumulation rates have varied by almost a factor of ten (Davies et al., 1977, doi:10.1126/science.197.4298.53). At the regional scale, surface productivity and deep-water physical and chemical conditions also affect the sediment accumulation rate. Since all these are susceptible to variation and may well vary in response to climatic change as well as other factors, it is extremely hazardous to attempt to express any climatic variable as a function of time on the basis of measurements originally made as a function of depth in sediment. Although time has been used as a basis for plotting Figs. i-8, these should be regarded as freehand sketches of climatic history rather than as time-series plots.

TENDENCIA THATCHERITIS OR ENGLISHNESS REMADE: The Fictions of Julian Barnes, Hanif Kureishi and Pat Barker

Julian Barnes, Pat Barker, and Hanif Kureishi are all canonical authors whose fictions are widely believed to reflect the cultural and political state of a nation that is post-war, post-imperial and post-modern. While much has been written on how Barker’s and Kureishi’s early works in particular respond to and intervene in the presiding political narrative of the 1980s – Thatcherism – treatment of how revenants of Thatcherism have shaped these writers’ works from 1990 on has remained cursory. Thatcherism is more than an obvious historical reference point for Barker, Barnes, and Kureishi; their works demonstrate a sophisticated understanding of how Thatcher’s reworkings of the repertoires of Englishness – a representational as well as political and cultural endeavour – persist beyond her time in office. Barnes, Barker, and Kureishi seem to have reached the same conclusion as political and cultural critics: Thatcher and Thatcherism have remade not only the contemporary political and cultural landscapes but also the electorate and consequently the English themselves. Tony Blair’s conception of the New Britain proved less than satisfactory because contemporary repertoires of Englishness repeat and rework historical and not incidentally imperial formulations of England and Englishness rather than envision civic and populist formulations of renewal. Barnes’s England, England and Arthur & George confront the discourse of inevitability that has come to be attached to contemporary formulations of both political and cultural Englishness – both in terms of its predictable demise and its belated celebration. Kureishi’s The Buddha of Suburbia and “The Body” speak to an alteration that has taken place in which historical Englishness and Thatcherism have become complementary rather than contrasting discourses. What Barker’s Border Crossing and Double Vision offer against this backdrop is a subtle interrogation of how renewal itself comes to be a presiding mode of cultural reflection that absorbs revolutionary possibility.

Cruise Speed Reduction for Ground Delay Programs: A Case Study for San Francisco International Airport Arrivals

Ground Delay Programs (GDP) are sometimes cancelled before their initial planned duration and for this reason aircraft are delayed when it is no longer needed. Recovering this delay usually leads to extra fuel consumption, since the aircraft will typically depart after having absorbed on ground their assigned delay and, therefore, they will need to cruise at more fuel consuming speeds. Past research has proposed speed reduction strategy aiming at splitting the GDP-assigned delay between ground and airborne delay, while using the same fuel as in nominal conditions. Being airborne earlier, an aircraft can speed up to nominal cruise speed and recover part of the GDP delay without incurring extra fuel consumption if the GDP is cancelled earlier than planned. In this paper, all GDP initiatives that occurred in San Francisco International Airport during 2006 are studied and characterised by a K-means algorithm into three different clusters. The centroids for these three clusters have been used to simulate three different GDPs at the airport by using a realistic set of inbound traffic and the Future Air Traffic Management Concepts Evaluation Tool (FACET). The amount of delay that can be recovered using this cruise speed reduction technique, as a function of the GDP cancellation time, has been computed and compared with the delay recovered with the current concept of operations. Simulations have been conducted in calm wind situation and without considering a radius of exemption. Results indicate that when aircraft depart early and fly at the slower speed they can recover additional delays, compared to current operations where all delays are absorbed prior to take-off, in the event the GDP cancels early. There is a variability of extra delay recovered, being more significant, in relative terms, for those GDPs with a relatively low amount of demand exceeding the airport capacity.

Qualités psychométriques de la version canadienne-française du Geriatric Anxiety Inventory

Afin de pallier au manque d’outils de dépistage efficaces et adaptés à la population âgée, le Geriatric Anxiety Inventory (GAI) et une forme courte (GAI-SF) ont été développés pour évaluer la sévérité des symptômes anxieux chez les aînés. La présente étude cherchait à évaluer les propriétés psychométriques de la version canadienne-française du GAI dans sa forme complète (GAI-FC) et courte (GAI-FC-SF) auprès de la population âgée québécoise francophone. Trois cent trente et une personnes de 65 ans et plus vivant dans la communauté ont participé à cette étude. Les propriétés psychométriques s’avèrent satisfaisantes pour le GAI-FC et le GAI-FC-SF avec, respectivement, une cohérence interne satisfaisante (α = ,94 et ,83), une validité convergente adéquate (r = ,50 à ,86 avec des instruments de mesure évaluant des concepts similaires ou reliés à l’anxiété), une bonne fidélité test-retest (r = ,89 et ,85) ainsi qu’une structure unifactorielle. Les résultats de cette étude appuient l’utilisation du GAI-FC et du GAI-FC-SF pour l’évaluation de l’anxiété chez les aînés québécois. Le GAI-FC-SF semble une alternative intéressante au GAI-FC comme outil de dépistage lorsque le temps disponible pour l’évaluation est limité. Mots-clés: Geriatric Anxiety Inventory, aînés, anxiété, trouble anxieux, instrument d’évaluation.

The Changing Relationship between Supervisors and Subordinates: How Managing This Relationship Evolves over Time

Understanding how the relationship between a subordinate and manager develops over time has been a critical matter both for academics and for business. In both academic journals and industry publications, some writers have argued that the relationship is driven by perceptions of fairness and treatment, and that developing the relationship can lead to better performance. Others have argued that higher performers get better treatment and resources, which results in superior relationships with their managers. There is really no clear answer of what comes first—perceptions of fairness, satisfaction with the supervisor, or job performance—and which leads to which.

Recommendations for in-situ data Near Real Time Quality Control

With the construction of operational oceanography systems, the need for real-time has become more and more important. A lot of work had been done in the past, within National Data Centres (NODC) and International Oceanographic Data and Information Exchange (IODE) to standardise delayed mode quality control procedures. Concerning such quality control procedures applicable in real-time (within hours to a maximum of a week from acquisition), which means automatically, some recommendations were set up for physical parameters but mainly within projects without consolidation with other initiatives. During the past ten years the EuroGOOS community has been working on such procedures within international programs such as Argo, OceanSites or GOSUD, or within EC projects such as Mersea, MFSTEP, FerryBox, ECOOP, and MyOcean. In collaboration with the FP7 SeaDataNet project that is standardizing the delayed mode quality control procedures in NODCs, and MyOcean GMES FP7 project that is standardizing near real time quality control procedures for operational oceanography purposes, the DATA-MEQ working group decided to put together this document to summarize the recommendations for near real-time QC procedures that they judged mature enough to be advertised and recommended to EuroGOOS.

Análise bioclimática e investigação do conforto térmico em ambientes externos: uma experiência no bairro de Petrópolis em Natal/RN

This study was intended to investigate how the urban form has been influencing the changes in the climate of the city and make a correlation between the climate and the thermal sensation of the users of open spaces. The research was developed in the district of Petrópolis in Natal/ RN whose occupation has been almost consolidated. Among other reasons, this district was selected because it was planned considering the environmental aspects of comfort. The methodologies used are based on KATZSCHNER (1997) and OLIVEIRA (1988) studies, which suggest the drawing and analysis of maps of the area under study, including topography, height of the buildings, land use, green areas, and types of soil pavement, as well as measurement of the environmental variables: air temperature, relative humidity, direction and wind speed for a comparative study. As part of this, study local users of the district were interviewed about their thermal sensations in open spaces. For the statistical analysis, data was collected at 10 distinct points characterized by BUSTOS ROMERO (2002), being 8 within the district and 2 at different places (outside the district), at climatologic stations, in 3 periods (August/2000, January/2002 and June/2002), for 4 consecutive days for each measurement (from Sunday to Wednesday) at the time of lower and higher temperatures in the city, 6:00 am and 1:00 pm, respectively. At the same time interviews were carried out with users of the open spaces in the area, totaling 171 valid formularies. The urban form showed a rather leveled topography, great diversity of land use and height of the buildings, with the existence of an area mostly occupied with high buildings, very little green area and soil practically impermeable. The statistical analysis showed high temperature and humidity levels. The wind direction is predominantly Southeast with extremely variable speeds. When the data from this district is compared with the data from other areas in the city and its outskirt, it was observed that this district is hotter and less ventilated than the others; besides, most users said that they felt uncomfortable in the local environmental conditions. The results of the analysis generated a zoning for the district with recommendations for soil occupation. The profile of the user was defined regarding the thermal comfort, as well as some discussion about the comfort parameters, including the proposal of limiting areas of temperature and humidity for the thermal comfort in the open spaces

Como planificar de acordo com as caraterísticas e necessidades dos diferentes contextos, nomeadamente no que concerne à heterogeneidade das crianças e dos respetivos grupos

Relatório de estágio para a obtenção do grau de mestre na especialidade profissional de Educação pré-escolar

Metabolomics as a tool to explore the staphylococcal biofilm

Orthopaedic infections can be polymicrobial existing as a microbiome. Infections often incorporate staphylococcal species, including Staphylococcus aureus. Such infections can lead to life threatening illness and implant failure. Furthermore, biofilm formation on the implant surface can occur, increasing pathogenicity, exacerbating antibiotic resistance and altering antimicrobial mechanism of action. Bacteria change dramatically during the transition to a biofilm growth state: phenotypically; transcriptionally; and metabolically, highlighting the need for research into molecular mechanisms involved in biofilm formation. Metabolomics can provide a tool to analyse metabolic changes which are directly related to the expressed phenotype. Here, we aimed to provide greater understanding of orthopaedic infection caused by S. aureus and biofilm formation on the implant surface. Through metagenome analysis by employing: implant material extraction; DNA extraction; microbial enrichment; and whole genome sequencing, we present a microbiome study of the infected prosthesis to resolve the causative species of orthopaedic hip infection. Results highlight the presence of S. aureus as a primary cause of orthopaedic infection along with Enterococcus faecium and the presence of secondary pathogen Clostridium difficile. Although results were hindered by the presence of host contaminating DNA even after microbial enrichment, conclusions could be made over the potential increased pathogenicity caused by the presence of a secondary pathogen and highlight method and sample preparation considerations when undertaking such a study. Following this finding, studies were focused on an orthopaedic clinical isolate of S. aureus and a metabolome extraction method for staphylococcal biofilms was developed using cell lysis through bead beating and solvent metabolome extraction. The method was found to be reproducible when coupled with liquid chromatography-mass spectrometry (LC-MS) and bioinformatics, allowing for the detection of significant changes in metabolism between planktonic and biofilm cultures to be identified and drug mechanism of actions (MOA) to be studied. Metabolomics results highlight significant changes in a number of metabolic pathways including arginine biosynthesis and purine metabolism between the two cell populations, evidence of S. aureus responding to their changing environment, including oxygen availability and a decrease in pH. Focused investigations on purine metabolism looking for biofilm modulation effects were carried out. Modulation of the S. aureus biofilm phenotype was observed through the addition of exogenous metabolites. Inosine increased biofilm biomass while formycin B, an inosine analogue, showed a dispersal effect and a potential synergistic effect in biofilm dispersal when coupled with gentamycin. Changes in metabolism between planktonic cells and biofilms highlight the requirement for antimicrobial testing to be carried out against planktonic cells and biofilms. Untargeted metabolomics was used to study the MOA of triclosan in S. aureus. The triclosan target and MOA in bacteria has already been characterised, however, questions remain over its effects in bacteria. Although the use of triclosan has come under increasing speculation, its full effects are still largely unknown. Results show that triclosan can induce a cascade of detrimental events in the cell metabolism including significant changes in amino acid metabolism, affecting planktonic cells and biofilms. Results and conclusions provide greater understanding of orthopaedic infections and specifically focus on the S. aureus biofilm, confirming S. aureus as a primary cause of orthopaedic infection and using metabolomic analysis to look at the changing state of metabolism between the different growth states. Metabolomics is a valuable tool for biofilm and drug MOA studies, helping understand orthopaedic infection and implant failure, providing crucial insight into the biochemistry of bacteria for the potential for inferences to be gained, such as the MOA of antimicrobials and the identification of novel metabolic drug targets.

Procesamiento de imágenes cerebrales en GPU

Abstract: As time has passed, the general purpose programming paradigm has evolved, producing different hardware architectures whose characteristics differ widely. In this work, we are going to demonstrate, through different applications belonging to the field of Image Processing, the existing difference between three Nvidia hardware platforms: two of them belong to the GeForce graphics cards series, the GTX 480 and the GTX 980 and one of the low consumption platforms which purpose is to allow the execution of embedded applications as well as providing an extreme efficiency: the Jetson TK1. With respect to the test applications we will use five examples from Nvidia CUDA Samples. These applications are directly related to Image Processing, as the algorithms they use are similar to those from the field of medical image registration. After the tests, it will be proven that GTX 980 is both the device with the highest computational power and the one that has greater consumption, it will be seen that Jetson TK1 is the most efficient platform, it will be shown that GTX 480 produces more heat than the others and we will learn other effects produced by the existing difference between the architecture of the devices.

Sucesso e insucesso no licenciamento: uma perspectiva integrada.

Doutoramento em Gestão.

Análise gráfica de estruturas porosas sobre a ótica da estereologia

In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.

O papel da formação profissional no plano estratégico da empresa : o caso OGMA, S.A.- Industria Aeronáutica de Portugal

Mestrado em Gestão de Recursos Humanos