Biopsias luteais em vacas Nelore

The present study describes a technique to obtain consecutive luteal samples by colpotomy. The animals received an epidural anesthesia and local anesthesia (vaginal vault) and after ten minutes the vaginal vault was incised with a scalpel blade and tissue was dissected to provide access to the pelvic cavity and to retract the ovary into the vagina. Then, a luteal biopsy was performed with a Yomann biopsy nipper. Signs indicative of pain and stress during the vaginal vault incision, traction of ovary or luteal biopsy were observed only in two collections. However, these signs were observed in ten collections during dissection of the vaginal wall and peritoneum. The occurrence of ataxia was observed in 26 collections and it was usually related to a longer duration of the procedure. Ataxia could be divided in light (15/26), moderate (6/26) and severe (5/26). The occurrence of ovarian adhesions ipsilateral to the incision was evaluated only in the initial four collections. Adhesions were present in 16 collections. The protocol described above provided a safe and efficient method to acquire luteal samples. The low incidence of adhesions allows the consecutive use of females without any interference in subsequent ovulations and collections.

Mobilização do solo, velocidade de infiltração de água e taxa de cobertura do solo na grama esmeralda, sob manejos mecanizados

The excessive compaction of the soil observed in sod production systems, affects the physical attributes of the soil, which can influence the water infiltration into the soil and hence the rate of soil cover by turfgrasses and time of the sod production. To minimize the effects of soil compacting, some producers use soil preparation equipment that raises the soil on the surface but does not cause excessive roughness which may harm the quality of the sod. Thus, the aim of the present study was to evaluate the infiltration rate and soil cover rate due to different management mechanized in the zoysiagrass sod production. The experimental design had random plots and four replications. The treatments consisted of five mechanized managements of soil: witness (without the use of equipment); coulter blade disc harrow used once (1CB), coulter blade disc harrow used twice (2CB), surface chisel used once (1C), surface chisel and coulter blade disc harrow used once (1C + 1CB). The treatments with 2CB and 1C + 1CB provided greater basic water infiltration speed in the soil and higher rate of soil cover by the turfgrass. The rate of soil cover by turfgrass is positively correlated with water infiltration rate at 133 and 226 DAP, demonstrating the influence of managements used in zoysiagrass sod production and the increment in the infiltration rate of water. Soil preparation utilizing coulter blade disc harrow used twice or surface chisel and coulter blade disc harrow used once is recommended under the conditions this study was done.

Distribuição de espécies com folhas homobáricas e heterobáricas no Cerrado e na Floresta Estacional Semidecídua

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Métodos de debicagem: desenvolvimento e desempenho produtivo de poedeiras leves e semipesadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Coordenação gestual na produção de encontros consonantais em crianças com desenvolvimento de linguagem típico e atípico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anatomia de folha e eixo da inflorescência: contribuições à taxonomia de Rapateaceae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de software para avaliação dos desempenhos hidráulico e econômico de pivôs centrais

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Métodos de debicagem: desenvolvimento e desempenho produtivo de poedeiras leves e semipesadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Coordenação gestual na produção de encontros consonantais em crianças com desenvolvimento de linguagem típico e atípico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anatomia de folha e eixo da inflorescência: contribuições à taxonomia de Rapateaceae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de software para avaliação dos desempenhos hidráulico e econômico de pivôs centrais

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Aerial organ anatomy of Smilax syphilitica (Smilacaceae)

Smilax L. in Brazil is represented by 32 taxa and it is a taxonomically difficult genus because the plants are dioecious and show wide phenotypic variation. The analysis and use of leaf anatomy characters is recognized as a frequently successful taxonomic method to distinguish between individual taxon, when floral material is absent or minute differences in flowers and foliage exist such as in Smilax. The aim of this study was to characterize the anatomical features of the aerial organs in Smilax syphilitica collected from the Atlantic Rainforest, in Santa Teresa-ES and the Smilax aff syphilitica from the Amazon Rainforest, in Manaus, Brazil. For this, a total of three samples of Smilax were collected per site. Sample leaves and stems were fixed with FAA 50, embedded in historesin, sectioned on a rotary microtome, stained and mounted in synthetic resin. Additionally, histochemical tests were performed and cuticle ornamentation was analyzed with standard scanning electron microscopy. S. syphilitica and S. aff syphilitica differed in cuticle ornamentation, epidermal cell arrangement and wall thickness, stomata type and orientation, calcium oxalate crystal type, and position of stem thorns. Leaf blades of S. syphilitica from the Amazon Rainforest have a network of rounded ridges on both sides, while in S. aff syphilitica, these ridges are parallel and the spaces between them are filled with numerous membranous platelets. Viewed from the front, the epidermal cells of S. syphilitica have sinuous walls (even more pronounced in samples from the Amazon); while in S. aff syphilitica, these cells are also sinuous but elongated in the cross-section of the blade and arranged in parallel. Stomata of S. syphilitica are paracytic, whereas in S. aff syphilitica, are both paracytic and anisocytic, and their polar axes are directed towards the mid-vein. Calcium oxalate crystals in S. syphilitica are prisms, whereas in S. aff syphilitica, crystal sand. Thorns occur in nodes and internodes in S. syphilitica but only in internodes in S. aff syphilitica. These features have proven to be of diagnostic value and may support a separation into two species, but future studies are needed to confirm that S. aff syphilitica is indeed a new taxon. Rev. Biol. Trop. 60(3): 1137-1148. Epub 2012 September 01.

Effect of sample pre-cracking method and notch geometry in plane strain fracture toughness tests as applied to a PMMA resin

The influence of test method factors (notch shape, square or angular, and pre-cracking method, by tapping onto or pressing a razor blade) on the results obtained in plane strain fracture toughness test according to standard ASTM D5045 using SENB specimens made of a commercial PMMA resin were investigated. Results were analyzed quantitatively by comparing the obtained K-IC values and qualitatively by observing their effect on the Moire fringes observed using photoelasticity, showing that, at 95% significance level, the K-IC values are affected by the pre-cracking method, with the most conservative value being obtained when natural pre-cracks were introduced by tapping onto a razor blade (K-IC = 1.15 +/- 0.11 MPa.m(0.5)). This correlates with a perturbation in the stress field close to the pre-crack tip observed in the photoelasticity test sample when it was introduced by pressing the razor blade. Surprisingly, notch geometry only slightly affects the results. (C) 2012 Elsevier Ltd. All rights reserved.

Oleoresin glands in copaiba (Copaifera trapezifolia Hayne: Leguminosae), a Brazilian rainforest tree

Although studies have addressed the chemical analysis and the biological activity of oleoresin in species of Copaifera, the cellular mechanisms of oleoresin production, storage, and release have rarely been investigated. This study detailed the distribution, ontogeny, and ultrastructure of secretory cavities and canals distributed in leaf and stem, respectively, of Copaifera trapezifolia, a Brazilian species included in a plant group of great economic interest. Axillary vegetative buds, leaflets, and portions of stem in primary and secondary growth were collected and processed in order to study the anatomy, histolocalization of substances, and ultrastructure. Secretory cavities are observed in the foliar blade and secretory canals in the petiolule and stem. They are made up of a uniseriate epithelium delimiting an isodiametric or elongated lumen. Biseriate epithelium is rarely observed and is a novelty for Leguminosae. Cavities and canals originate from ground meristem cells and the lumen is formed by schizogenesis. The content of the cavities and canals of both stem and leaf is oily and resinous, which suggests that the oleoresin could be extracted from the leaf instead of the stem. Phenolic compounds are also detected in the epithelial cell cytoplasm. Cavities and canals in the beginning of developmental stages have polarized epithelial cells. The cytoplasm is rich in smooth and rough endoplasmic reticula connected to vesicles or plastids. Smooth and rough endoplasmic reticulum and plastids were found to be predominant in the epithelial cells of the secretory cavities and canals of C. trapezifolia. Such features testify the quantities of oleoresin found in the lumen and phenolic compounds in the epithelial cell cytoplasm of these glands. Other studies employing techniques such as correlative light electron microscopy could show the vesicle traffic and the compartmentalization of the produced substances in such glands.

Biomechanical comments about Triassic dinosaurs from Brazil

Triassic dinosaurs of Brazil are found in Santa Maria and Caturrita formations, Rio Grande do Sul state, Brazil. There are three species known from the Santa Maria Formation (Staurikosaurus pricei, Saturnalia tupiniquim and Pampadromaeus barberenai), and two from Caturrita Formation (Guaibasaurus candelariensis and Unaysaurus tolentinoi). These dinosaur materials are, for the most part, well preserved and allow for descriptions of musculature and biomechanical studies. The lateral rotation of the Saturnalia femur is corroborated through calculations of muscle moment arms. The enhanced supracetabular crest of Saturnalia, Guaibasaurus, Staurikosaurus, Herrerasaurus ischigualastensis, Efraasia minor and Chormogisaurus novasi suggests that basal dinosaurs may have maintained an inclination of the trunk at least 20º on the horizontal axis. The pectoral girdle articulation of basal sauropodomorphs (Saturnalia and Unaysaurus) was established using a new method, the Clavicular Ring, and the scapular blade remains near 60º on the horizontal axis. This is a plesiomorphic condition among sauropodomorphs and is also seen in the articulated plateosauridae Seitaad ruessi. The Brazilian basal dinosaurs were lightweight with a body mass estimated around 18.5 kg for Staurikosaurus, 6.5 kg for Saturnalia, and 17 kg for Guaibasaurus. Pampadromaeus probably weighed 2.5 kg, but measures of its femur are necessary to confirm this hypothesis. The Triassic dinosaurs from Brazil were diversified but shared some functional aspects that were important in an evolutionary context.