Cateterismo cardíaco: da compreensão do usuário ao planejamento das orientações de enfermagem

Pós-graduação em Enfermagem (mestrado profissional) - FMB

The Brazilian Experience With the Use of the Shield Wire Line Technology (SWL) for Energy Distribution

This paper presents an analysis of the impact of the lightning overvoltages on the operational performance of the energized shield wire line technology (SWL) implemented in two locations of the State of Rondonia, Brazil. The analysis covers the periods of 1996 to 2000 (SWL Jaru) and 1997 to 2002 (SWL Itapua do Oeste), and shows that lightning is responsible for most of the system outages. The paper describes the satisfactory results achieved with the system, showing that the isolation and energization of the shield wires does not deteriorate the lightning performance of the 230 kV transmission lines. Comparisons between the performances of the SWL technology, conventional 34.5 kV lines, and thermal power plants in operation in the same region are also presented. The results demonstrate the technical and economical viability of the SWL technology and show that its application can lead to a postponement of investments.

Análise dos títulos de periódicos recebidos pela biblioteca do Instituto de Medicina Tropical de São Paulo da Universidade de São Paulo em comparação com os registros cadastrados no catálogo bibliográfico dedalus da universidade de São Paulo

Este trabalho relata a experiência e os procedimentos adotados em um processo de análise e identificação dos títulos de periódicos recebidos pela Biblioteca do Instituto de Medicina Tropical de São Paulo da Universidade de São Paulo, desde sua criação. Para a coleta de dados foram utilizadas as informações dos registros bibliográficos no Módulo de Catalogação no Banco de Dados Bibliográficos – DEDALUS Aleph 500 Versão 18.1 da Universidade de São Paulo, seguindo alguns critérios pré-estabelecidos. Conclui-se que, apesar dos problemas detectados serem pouco relevantes em relação ao acervo analisado, deve-se manter um estudo comparativo entre a necessidade do usuário e a coleção disponível na Biblioteca, para que os periódicos atendam às necessidades de informação de seus usuários.

Atendimento online em bibliotecas: a experiência da Universidade de São Paulo

Os serviços de informação aliados às tecnologias evoluíram em sua forma de atuação à medida que oferecem, em menor tempo possível, informação segura de alcance maior aos usuários das bibliotecas. São inúmeros os conceitos de Serviço de Referência Virtual (SRV) que compartilham a ideia de que o uso das tecnologias de informação facilitam a comunicação entre bibliotecários e usuários. As Bibliotecas do Sistema Integrado de Bibliotecas da Universidade de São Paulo (SIBi/USP), detectaram a relevância de modernizar o Serviço de Atendimento ao Usuário, utilizando novos meios de comunicação e melhorando a interação com os usuários por meio de recursos que são de domínio e uso cotidiano dos mesmos. A Biblioteca da Faculdade de Medicina Veterinária e Zootecnia (FMVZ) da Universidade de São Paulo (USP) implantou o serviço de Atendimento Online por chat, disponibilizando aos seus usuários um novo canal de comunicação que permite o esclarecimento de dúvidas e solicitações em tempo real com atendentes. A experiência foi extremamente positiva convergindo para a implantação do sistema em outras quatro bibliotecas da USP

Atendimento online em bibliotecas: a experiência da Universidade de São Paulo

Os serviços de informação aliados às tecnologias evoluíram em sua forma de atuação à medida que oferecem, em menor tempo possível, informação segura de alcance maior aos usuários das bibliotecas. São inúmeros os conceitos de Serviço de Referência Virtual (SRV) que compartilham a ideia de que o uso das tecnologias de informação facilitam a comunicação entre bibliotecários e usuários. As Bibliotecas do Sistema Integrado de Bibliotecas da Universidade de São Paulo (SIBi/USP), detectaram a relevância de modernizar o Serviço de Atendimento ao Usuário, utilizando novos meios de comunicação e melhorando a interação com os usuários por meio de recursos que são de domínio e uso cotidiano dos mesmos. A Biblioteca da Faculdade de Medicina Veterinária e Zootecnia (FMVZ) da Universidade de São Paulo (USP) implantou o serviço de Atendimento Online por chat, disponibilizando aos seus usuários um novo canal de comunicação que permite o esclarecimento de dúvidas e solicitações em tempo real com atendentes. A experiência foi extremamente positiva convergindo para a implantação do sistema em outras quatro bibliotecas da USP

Augmenting Static Source Views in IDEs with Dynamic Metrics

Mainstream IDEs such as Eclipse support developers in managing software projects mainly by offering static views of the source code. Such a static perspective neglects any information about runtime behavior. However, object-oriented programs heavily rely on polymorphism and late-binding, which makes them difficult to understand just based on their static structure. Developers thus resort to debuggers or profilers to study the system's dynamics. However, the information provided by these tools is volatile and hence cannot be exploited to ease the navigation of the source space. In this paper we present an approach to augment the static source perspective with dynamic metrics such as precise runtime type information, or memory and object allocation statistics. Dynamic metrics can leverage the understanding for the behavior and structure of a system. We rely on dynamic data gathering based on aspects to analyze running Java systems. By solving concrete use cases we illustrate how dynamic metrics directly available in the IDE are useful. We also comprehensively report on the efficiency of our approach to gather dynamic metrics.

Privacy concerns and identity in online social networks

Driven by privacy-related fears, users of Online Social Networks may start to reduce their network activities. This trend can have a negative impact on network sustainability and its business value. Nevertheless, very little is understood about the privacy-related concerns of users and the impact of those concerns on identity performance. To close this gap, we take a systematic view of user privacy concerns on such platforms. Based on insights from focus groups and an empirical study with 210 subjects, we find that (i) Organizational Threats and (ii) Social Threats stemming from the user environment constitute two underlying dimensions of the construct “Privacy Concerns in Online Social Networks”. Using a Structural Equation Model, we examine the impact of the identified dimensions of concern on the Amount, Honesty, and Conscious Control of individual self-disclosure on these sites. We find that users tend to reduce the Amount of information disclosed as a response to their concerns regarding Organizational Threats. Additionally, users become more conscious about the information they reveal as a result of Social Threats. Network providers may want to develop specific mechanisms to alleviate identified user concerns and thereby ensure network sustainability.

Health promotion attitudes and practices of Texas nurse practitioners

The purpose of this descriptive cross-sectional survey was to examine the health promotion attitudes and practices of Texas nurse practitioners and to evaluate the applicability of the Theory of Reasoned Action and the Theory of Planned Behavior as a theoretical model to guide nurse practitioner health promotion research. A questionnaire developed to elicit responses regarding demographic information, practice characteristics, behavior, behavior intention, attitudes toward health promotion, subjective norm and perceived behavioral control for health promotion practices was mailed to the home address of 727 Texas nurse practitioners. The majority of the 442 respondents reported positive attitudes toward health promotion. Texas nurse practitioners provide health promotion for more than 50% of their patients. Significant barriers to the provision of health promotion cited by Texas nurse practitioners were lack of time, lack of reimbursement and lack of patient desire to change behavior. The findings of this study support the use of the Theory of Reasoned Action and the Theory of Planned Behavior in nurse practitioner research. ^

Governance Structure Choices in Supply Chain Management Evidence from Spanish and Chinese Pork Chain Cases

The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-market relationship still dominates governance structure of pork chain, especially between the numerous house-hold pig holders and the great number of small slaughters. While in Spain, chain agents commonly apply cooperatives or integrations to cooperate. It also has been proven by recent studies, that in quality management at the chain level that supply chain integration has a direct effect on quality management practices (Han, 2010). Therefore, the author started to investigate the governance structure choices in supply chain management. And it has been set as the first research objective, which is to explain the governance structure choices process and the influencing factors in supply chain management, analyzing the pork chains cases in Spain and in China. During the further investigation, the author noticed the international trade of pork between Spain and China is not smooth since the signature of bi-lateral agreement on pork trade in 2007. Thus, another objective of the research is to find and solve the problems exist in the international pork chain between Spain and China. For the first objective, to explain the governance structure choices in supply chain management, the thesis conducts research in three main sections. 10 First of all, the thesis gives a literature overview in chapter two on Supply Chain Management (SCM), agri-food chain management and pork chain management. It concludes that SCM is a systems approach to view the supply chains as a whole, and to manage the total flow of goods inventory from the supplier to the ultimate customer. It includes the bi-directional flow of products (materials and services) and information, and the associated managerial and operational activities. And it also is a customer focus to create unique and individual source of customer value with an appropriate use of resources, leading to customer satisfaction and building competitive chain advantages. Agri-food chain management and pork chain management are applications of SCM in agri-food sector and pork sector respectively. Then, the research gives a comparative study in chapter three in the pork chain and pork chain management between Spain and China. Many differences are found, while the main difference is governance structure in pork chain management. Furthermore, the author gives an empirical study on governance structure choice in chapter five. It is concluded that governance structure of supply chain consists of a collection of rules/institutions/constraints structuring the transactions between the various stakeholders. Based on the overview on literatures closely related with governance structure, such as transaction cost economics, transaction value analysis and resource-based view theories, seven hypotheses are proposed, which are: Hypothesis 1: Transaction cost has positive relationship with governance structure choice Hypothesis 2: Uncertainty has positive relationship with transaction cost; higher uncertainty exerts high transaction cost Hypothesis 3: The relationship between asset specificity and transaction cost is positive Hypothesis 4: Collaboration advantages and governance structure choice have positive relationship11 Hypothesis 5: Willingness to collaborate has positive relationship with collaboration advantages Hypothesis 6: Capability to collaborate has positive relationship with collaboration advantages Hypothesis 7: Uncertainty has negative effect on collaboration advantages It is noted that as transaction cost value is negative, the transaction cost mentioned in the hypotheses is its absolute value. To test the seven hypotheses, Structural Equation Model (SEM) is applied and data collected from 350 pork slaughtering and processing companies in Jiangsu, Shandong and Henan Provinces in China is used. Based on the empirical SEM model and its results, the seven hypotheses are proved. The author generates several conclusions accordingly. It is found that the governance structure choice of the chain not only depends on transaction cost, it also depends on collaboration advantages. Exchange partners establish more stable and more intense relationship to reduce transaction cost and to maximize collaboration advantages. ―Collaboration advantages‖ in this thesis is defined as the joint value achieved through transaction (mutual activities) of agents in supply chains. This value forms as improvements, mainly in mutual logistics systems, cash response, information exchange, technological improvements and innovative improvements and quality management improvements, etc. Governance structure choice is jointly decided by transaction cost and collaboration advantages. Chain agents take different governance structures to coordinate in order to decrease their transaction cost and to increase their collaboration advantages. In China´s pork chain case, spot market relationship dominates the governance structure among the numerous backyard pig farmer and small family slaughterhouse 12 as they are connected by acquaintance relationship and the transaction cost in turn is low. Their relationship is reliable as they know each other in the neighborhood; as a result, spot market relationship is suitable for their exchange. However, the transaction between large-scale slaughtering and processing industries and small-scale pig producers is becoming difficult. The information hold back behavior and hold-up behavior of small-scale pig producers increase transaction cost between them and large-scale slaughtering and processing industries. Thus, through the more intense and stable relationship between processing industries and pig producers, processing industries reduce the transaction cost and improve the collaboration advantages with their chain partners, in which quality and safety collaboration advantages be increased, meaning that processing industries are able to provide consumers products with better quality and higher safety. It is also drawn that transaction cost is influenced mainly by uncertainty and asset specificity, which is in line with new institutional economics theories developed by Williamson O. E. In China´s pork chain case, behavioral uncertainty is created by the hold-up behaviors of great numbers of small pig producers, while big slaughtering and processing industries having strong asset specificity. On the other hand, ―collaboration advantages‖ is influenced by chain agents´ willingness to collaborate and chain agents´ capabilities to cooperate. With the fast growth of big scale slaughtering and processing industries, they are more willing to know and make effort to cooperate with their chain members, and they are more capable to create joint value together with other chain agents. Therefore, they are now the main chain agents who drive more intense and stable governance structure in China‘s pork chain. For the other objective, to find and solve the problems in the international pork chain between Spain and China, the research gives an analysis in chapter four on the 13 international pork chain. This study gives explanations why the international trade of pork between Spain and China is not sufficient from the chain perspective. It is found that the first obstacle is the high quality and safety requirement set by Chinese government. It makes the Spanish companies difficult to get authorities to export. Other aspects, such as Spanish pork is not competitive in price compared with other countries such as Denmark, United States, Canada, etc., Chinese consumers do not have sufficient information on Spanish pork products, are also important reasons that Spain does not export great quantity of pork products to China. It is concluded that China´s government has too much concern on the quality and safety requirements to Spanish pork products, which makes trade difficult to complete. The two countries need to establish a more stable and intense trade relationship. They also should make the information exchange sufficient and efficient and try to break trade barriers. Spanish companies should consider proper price strategies to win the Chinese pork market

Generating Automated News to Explain the Meaning of Sensor Data

An important competence of human data analysts is to interpret and explain the meaning of the results of data analysis to end-users. However, existing automatic solutions for intelligent data analysis provide limited help to interpret and communicate information to non-expert users. In this paper we present a general approach to generating explanatory descriptions about the meaning of quantitative sensor data. We propose a type of web application: a virtual newspaper with automatically generated news stories that describe the meaning of sensor data. This solution integrates a variety of techniques from intelligent data analysis into a web-based multimedia presentation system. We validated our approach in a real world problem and demonstrate its generality using data sets from several domains. Our experience shows that this solution can facilitate the use of sensor data by general users and, therefore, can increase the utility of sensor network infrastructures.

Evaluation of angle-dependent absorption: Computer simulation and listening test for an objective and subjective evaluation

The aim of this thesis is the subjective and objective evaluation of angledependent absorption coefficients. As the assumption of a constant absorption coefficient over the angle of incidence is not always held, a new model acknowledging an angle-dependent reflection must be considered, to get a more accurate prediction in the sound field. The study provides information about the behavior of different materials in several rooms, depending on the reflection modeling of incident sound waves. An objective evaluation was run for an implementation of angle-dependent reflection factors in the image source and ray tracing simulation models. Results obtained were analysed after comparison to diffuse-field averaged data. However, changes in acoustic characteristics of a room do not always mean a variation in the listener’s perception. Thus, additional subjective evaluation allowed a comparison between the different results obtained with the computer simulation and the response from the individuals who participated in the listening test. The listening test was designed following a three-alternative forced-choice (3AFC) paradigm. In each interaction asked to the subjects a sequence of either three pink noise bursts or three natural signals was alternated. These results were supposed to show the influence and perception of the two different ways to implement surface reflection –either with diffuse or angle-dependent absorption properties. Results show slightly audible effects when material properties were exaggerated. El objetivo de este trabajo es la evaluación objetiva y subjetiva del coeficiente de absorción en función del ángulo de incidencia de la onda de sonido. La suposición de un coeficiente de absorción constante con respecto al ángulo de incidencia no siempre se sostiene. Por ello, un nuevo modelo considerando la reflexión dependiente del ángulo se debe tener en cuenta para obtener predicciones más certeras en el campo del sonido. El estudio proporciona información sobre el comportamiento de diferentes materiales en distintos recintos, dependientes del modelo de reflexión de las ondas de sonido incidentes. Debido a las dificultades a la hora de realizar las medidas y, por lo tanto, a la falta de datos, los coeficientes de absorción dependientes del ángulo a menudo no se tienen en cuenta a la hora de realizar las simulaciones. Hoy en día, aún no hay una tendencia de aplicar el coeficiente de absorción dependiente del ángulo para mejorar los modelos de reflexión. Por otra parte, para una medición satisfactoria de la absorción dependiente del ángulo, sólo hay unos pocos métodos. Las técnicas de medición actuales llevan mucho tiempo y hay algunos materiales, condiciones y ángulos que no pueden ser reproducidos y, por lo tanto, no es posible su medición. Sin embargo, en el presente estudio, los ángulos de incidencia de las ondas de sonido son conocidos y almacenados en una de base de datos para cada uno de los materiales, de modo que los coeficientes de absorción para el ángulo dado pueden ser devueltos siempre que sean requeridos por el usuario. Para realizar el estudio se llevó a cabo una evaluación objetiva, por medio de la implementación del factor de reflexión dependiente del ángulo en los modelos de fuentes imagen y trazado de rayos. Los resultados fueron analizados después de ser comparados con el promedio de los datos obtenidos en medidas en el campo difuso. La simulación se hizo una vez se configuraron un número de materiales creados por el autor, a partir de los datos existentes en la literatura y los catálogos de fabricantes. Los modelos de Komatsu y Mechel sirvieron como referencia para los materiales porosos, configurando la resistividad al aire o el grosor, y para los paneles perforados, introduciendo el radio de los orificios y la distancia entre centros, respectivamente. Estos materiales se situaban en la pared opuesta a la que se consideraba que debía alojar a la fuente sonora. El resto de superficies se modelaban con el mismo material, variando su coeficiente de absorción y/o de dispersión. Al mismo tiempo, una serie de recintos fueron modelados para poder reproducir distintos escenarios de los que obtener los resultados. Sin embargo, los cambios en las características acústicas de un recinto no significan variaciones en la percepción por parte del oyente. Por ello, una evaluación subjetiva adicional permitió una comparación entre los diferentes resultados obtenidos mediante la simulación informática y la respuesta de los individuos que participaron en la prueba de escucha. Ésta fue diseñada bajo las pautas del modelo de test three-alternative forced-choice (3AFC), con treinta y dos preguntas diferentes. En cada iteración los sujetos fueron preguntados por una secuencia alterna entre tres señales, siendo dos de ellas iguales. Éstas podían ser tanto ráfagas de ruido rosa como señales naturales, en este test se utilizó un fragmento de una obra clásica interpretada por un piano. Antes de contestar al cuestionario, los bloques de preguntas eran ordenados al azar. Para cada ensayo, la mezcla era diferente, así los sujetos no repetían la misma prueba, evitando un sesgo por efectos de aprendizaje. Los bloques se barajaban recordando siempre el orden inicial, para después almacenar los resultados reordenados. La prueba de escucha fue realizada por veintitrés personas, toda ellas con conocimientos dentro del campo de la acústica. Antes de llevar a cabo la prueba de escucha en un entorno adecuado, una hoja con las instrucciones fue facilitada a cada persona. Los resultados muestran la influencia y percepción de las dos maneras distintas de implementar las reflexiones de una superficie –ya sea con respecto a la propiedad de difusión o de absorción dependiente del ángulo de los materiales. Los resultados objetivos, después de ejecutar las simulaciones, muestran los datos medios obtenidos para comprender el comportamiento de distintos materiales de acuerdo con el modelo de reflexión utilizado en el caso de estudio. En las tablas proporcionadas en la memoria se muestran los valores del tiempo de reverberación, la claridad y el tiempo de caída temprana. Los datos de las características del recinto obtenidos en este análisis tienen una fuerte dependencia respecto al coeficiente de absorción de los diferentes materiales que recubren las superficies del cuarto. En los resultados subjetivos, la media de percepción, a la hora de distinguir las distintas señales, por parte de los sujetos, se situó significativamente por debajo del umbral marcado por el punto de inflexión de la función psicométrica. Sin embargo, es posible concluir que la mayoría de los individuos tienden a ser capaces de detectar alguna diferencia entre los estímulos presentados en el 3AFC test. En conclusión, la hipótesis de que los valores del coeficiente de absorción dependiente del ángulo difieren es contrastada. Pero la respuesta subjetiva de los individuos muestra que únicamente hay ligeras variaciones en la percepción si el coeficiente varía en intervalos pequeños entre los valores manejados en la simulación. Además, si los parámetros de los materiales acústicos no son exagerados, los sujetos no perciben ninguna variación. Los primeros resultados obtenidos, proporcionando información respecto a la dependencia del ángulo, llevan a una nueva consideración en el campo de la acústica, y en la realización de nuevos proyectos en el futuro. Para futuras líneas de investigación, las simulaciones se deberían realizar con distintos tipos de recintos, buscando escenarios con geometrías irregulares. También, la implementación de distintos materiales para obtener resultados más certeros. Otra de las fases de los futuros proyectos puede realizarse teniendo en cuenta el coeficiente de dispersión dependiente del ángulo de incidencia de la onda de sonido. En la parte de la evaluación subjetiva, realizar una serie de pruebas de escucha con distintos individuos, incluyendo personas sin una formación relacionada con la ingeniería acústica.

Sophisticated security verification on routing repaired balanced cell-based dual-rail logic against side channel analysis

Conventional dual-rail precharge logic suffers from difficult implementations of dual-rail structure for obtaining strict compensation between the counterpart rails. As a light-weight and high-speed dual-rail style, balanced cell-based dual-rail logic (BCDL) uses synchronised compound gates with global precharge signal to provide high resistance against differential power or electromagnetic analyses. BCDL can be realised from generic field programmable gate array (FPGA) design flows with constraints. However, routings still exist as concerns because of the deficient flexibility on routing control, which unfavourably results in bias between complementary nets in security-sensitive parts. In this article, based on a routing repair technique, novel verifications towards routing effect are presented. An 8 bit simplified advanced encryption processing (AES)-co-processor is executed that is constructed on block random access memory (RAM)-based BCDL in Xilinx Virtex-5 FPGAs. Since imbalanced routing are major defects in BCDL, the authors can rule out other influences and fairly quantify the security variants. A series of asymptotic correlation electromagnetic (EM) analyses are launched towards a group of circuits with consecutive routing schemes to be able to verify routing impact on side channel analyses. After repairing the non-identical routings, Mutual information analyses are executed to further validate the concrete security increase obtained from identical routing pairs in BCDL.

Análisis dinámico experimental de edificios esbeltos

Es conocido que la variación del comportamiento dinámico de las estructuras puede ser empleado dentro de un sistema de monitorización de su integridad estructural. Así, este estudio tiene como objetivo comprender el comportamiento dinámico de edificios esbeltos, frente a diferentes agentes ambientales como la temperatura y/o dirección y velocidad del viento. En el marco de esta investigación, se estudian dos edificios: la Torre de la ETSI (Escuela Técnica Superior de Ingenieros) de Caminos, Canales y Puertos de la UPM (Universidad Politécnica de Madrid) y un edificio de viviendas situado en la calle de Arturo Soria de Madrid. Los datos medioambientales antes mencionados, se registraron con sendas estacionales meteorológicas situadas en las azoteas de ambos edificios. Se realiza el análisis modal operacional de ambas estructuras. Este análisis se realiza a partir de las mediciones de las aceleraciones ante excitaciones ambientales, es un análisis basado sólo en la respuesta de la estructura. Por tanto, no es necesario interrumpir el funcionamiento en servicio de la instalación, obteniendo su comportamientos en este estado. A partir de este análisis, se obtienen las frecuencias naturales, los amortiguamientos modales y las formas modales. Así, en este trabajo se ha estudiado la relación existente entre la variación en la estimación de las frecuencias naturales y la variación de los agentes ambientales (fundamentalmente la temperatura). Los ensayos dinámicos en los dos edificios mencionados anteriormente, se han realizado utilizando acelerómetros de alta sensibilidad sincronizados inalámbricamente, lo cual ha simplificado el trabajo experimental si lo comparamos con los sistemas tradicionales. Como resultado del trabajo realizado se pueden destacar los siguientes puntos: (i) se ha visto que con el equipamiento disponible se pueden realizar análisis dinámicos de edificios, (ii) se ha mejorado el conocimiento dinámico de estas estructuras, y (iii) se ha visto la importancia que pueden tener los agentes ambientales dependiendo por un lado del tipo estructura del edificio. A partir del trabajo, se podrían actualizar modelos matemáticos que sirvan para la predicción de daños en las estructuras, y por otro, se podrán eliminar los efectos de los agentes ambientales, lo cual es un punto vital si se quiere emplear los parámetros modales para el cálculo de indices de daño. La aplicación de este tipo de investigación ayudará a tener una información mayor sobre el comportamiento de las estructuras y así, en el futuro, poder realizar distintos tipos de procesos, como la formulación de modelos matemáticos que reflejen con mayor fidelidad el comportamiento real. De esta forma, la monitorización de los agentes medioambientales permitirán valorar la influencia de estas variaciones sobre la estructura pudiéndose eliminar estos efectos. Con ello, se mejora la incertidumbre en la variación de frecuencias que puede ser utilizada como un sistema de activación de alarmas frente a la detección de daños estructurales. It is known that the variation of the dynamic behavior of structures can be used within a system to monitor structural integrity. So, this study aims to understand the dynamic behavior of slender buildings, against different environmental agents such as temperature and / or wind direction and velocity. As part of this investigation, two buildings are studied: the ETSI's (Escuela Técnica Superior de Ingenieros) main tower of Escuela de Caminos, Canales y Puertos of UPM (Universidad Politécnica de Madrid) and a residential building located in the streets Arturo Soria Madrid. The environmental data were recorded with weather stations located on the roof of both buildings. In both structures a modal operational analysis has been carried out. This analysis is performed from the measurements of the acceleration to the environmental excitation, this analysis is based only on the response of the structure. Therefore, it is not necessary to interrupt the operation of the structure, getting its behavior in this state. From this analysis, the natural frequencies, modal damping and mode shapes are obtained. So, in this work we have studied the existing relationship between the variation in the estimate of the natural frequencies and the variation of environmental agents (mainly temperature). The dynamic tests in the two buildings mentioned above, have been made using high-sensitivity accelerometers wirelessly synchronized, which has simplified the experimental work when compared to traditional systems. As a result of work performed can highlight the following points: (i) it has been found that with the available equipment can perform dynamic analysis of buildings, (ii) has improved dynamic knowledge of these structures, and, (iii) can be seen the potential importance of environmental agents depending on the type of building structure. From the work, mathematical models can be updated that serve to prediction of damage to structures, and on the other side, may eliminate the effects of environmental agents, which is a vital point if you want to use the modal parameters for calculating damage ratings. The application of this type of research will help to have more information about the behavior of structures and so, in the future, conduct various processes, as the formulation of mathematical models that reflect more accurately an actual behavior. In this way the monitoring of environmental agents will allow evaluate the influence of these variations on the structure being possible eliminate these effects. Thereby, improvement the uncertainty in the frequencies variation that can be used as an alarm activation system from detection of structural damage.

Efficacia della formazione alla salute e sicurezza sul lavoro: fattori di successo e criticità

Background: sulla base delle evidenze emerse dalle rassegne sistematiche in materia (Johnstone, 1994; Cohen et al.,1998; Robson et al., 2012; Burke et al., 2006; Ricci et al., 2015) si è ipotizzato che la formazione alla salute e sicurezza sul lavoro sia maggiormente efficace quando non è presentata come obbligatoria e venga articolata su più livelli di apprendimento, attraverso metodologie adeguate per ogni livello, con docenti che abbiano caratteristiche corrispondenti allo specifico obiettivo di apprendimento e la cui durata sia parametrata all’obiettivo stesso. Obiettivo di questa ricerca è valutare se esista e quanto sia intensa la relazione causale tra la formazione alla sicurezza sul lavoro e i suoi effetti sul miglioramento delle conoscenze, degli atteggiamenti, dei comportamenti, degli esiti per la salute, del clima di sicurezza aziendale, del controllo comportamentale percepito dai lavoratori, delle condizioni operative e procedure interne, oltre l’eventuale effetto di moderazione determinato da caratteristiche socio-demografiche dei partecipanti e dal gradimento della formazione. Metodo: la variabile indipendente è costituita dell’intervento formativo erogato, articolato in tre condizioni: formazione obbligatoria, formazione non obbligatoria, gruppo di controllo: sono stati posti a confronto due interventi di pari durata (16 settimane, per 10h complessive), realizzati con identiche modalità (step1 audio-visivo; step2 affiancamento su lavoro da parte del preposto; step3 discussione di auto-casi), ma differenziati rispetto all’essere presentati uno come formazione obbligatoria, l’altro come non obbligatoria. I due gruppi sono anche stati confrontati con un gruppo di controllo per il quale la formazione è prevista successivamente. I partecipanti sono stati assegnati in modo casuale al gruppo con obbligo formativo, senza obbligo formativo, di controllo. Sono stati presi come indicatori (variabili dipendenti) per valutare l’effetto della formazione: I livello – conoscenze: riconoscimento o produzione di un maggior numero di risposte corrette. II livello – atteggiamenti e credenze: maggiore propensione a mettere in atto comportamenti auto ed etero protettivi. III livello – comportamenti: comportamenti osservati più adeguati per la tutela della salute propria e altrui. IV livello – salute: maggior grado di benessere bio-psico-sociale auto-riferito. Le misure di esito consistono nella variazione tra la rilevazione iniziale e ogni rilevazione successiva, sulla base delle diverse misure registrate per ognuno dei quattro livelli dell’intervento formativo. Lo stesso confronto del tempo è stato realizzato per le misure del clima di sicurezza aziendale, del controllo comportamentale percepito dai lavoratori, delle condizioni operative e procedure interne, oltre l’eventuale effetto di moderazione determinato da caratteristiche socio-demografiche dei partecipanti e dal gradimento della formazione, quest’ultimo misurato solo immediatamente al termine dell’intervento. Risultati: le condizioni di intervento non differiscono in termini di efficacia, la formazione determina infatti gli stessi risultati per i partecipanti del gruppo obbligo formativo e di quello non obbligo, con una significativa differenza post-intervento rispetto al gruppo di controllo. La formazione ha un effetto forte nel miglioramento delle conoscenze che solo parzialmente decade nel tempo, ma comunque mantenendo un livello maggiore rispetto ai valori iniziali. In relazione al miglioramento di atteggiamenti e comportamenti sicuri nel lavoro al Videoterminale, l’effetto della formazione è modesto: per gli atteggiamenti si registra solo un miglioramento verso l’applicazione delle procedure come utili realmente e non come mero adempimento, ma tale effetto decade entro quattro mesi riportando i partecipanti su valori iniziali; i comportamenti invece migliorano nel tempo, ma con deboli differenze tra partecipanti alla formazione e gruppo di controllo, tuttavia tale miglioramento non decade in seguito. Non si registrano invece effetti della formazione nella direzione attesa in termini di esiti per la salute, per il miglioramento del clima di sicurezza e come maggior controllo comportamentale percepito, non risultano nemmeno dati evidenti di moderazione degli effetti dovuti a caratteristiche socio-demografiche dei partecipanti. Inoltre emerge che il gradimento per la formazione è correlato con migliori atteggiamenti (strumento audio-visivo), il miglioramento del clima di sicurezza e un maggior controllo comportamentale percepito (studio di auto-casi), ovvero gli step che hanno visto l’intervento di formatori qualificati. Infine, la formazione ha determinato migliori condizioni operative e l’adeguamento delle procedure interne. Conclusioni: la presente ricerca ci consente di affermare che la formazione erogata è stata efficace, oltre che molto gradita dai partecipanti, in particolare quando il formatore è qualificato per questa attività (step1 e 3). L’apprendimento prodotto è tanto più stabile nel tempo quanto più i contenuti sono in stretta relazione con l’esperienza lavorativa quotidiana dei partecipanti, mentre negli altri casi il decremento degli effetti è alquanto rapido, di conseguenza ribadiamo la necessità di erogare la formazione con continuità nel tempo. E’ risultato comunque modesto l’effetto della formazione per migliorare gli atteggiamenti e i comportamenti nel lavoro al VDT, ma, al di là di alcuni limiti metodologici, sono obiettivi ambiziosi che richiedono più tempo di quanto abbiamo potuto disporre in questa occasione e il cui conseguimento risente molto delle prassi reali adottate nel contesto lavorativo dopo il termine della formazione. Le evidenze finora prodotte non hanno poi chiarito in modo definitivo se attraverso la formazione si possano determinare effetti significativi nel miglioramento di esiti per la salute, anche eventualmente attraverso interventi di supporto individuale. Inoltre l’assenza di differenze significative negli effetti tra i partecipanti assegnati alla condizione di obbligo e quelli di non obbligo, eccezion fatta in direzione opposta alle attese per la misura del danno da lavoro, suggeriscono che nell’erogare la formazione, occorre sottolineare in misura molto rilevante l’importanza dell’intervento che viene realizzato, anche qualora esistesse una prescrizione normativa cogente. Infine, la ricerca ci ha fornito anche indicazioni metodologiche e misure valide che invitano ad estendere questa formazione, e la sua valutazione di efficacia, a diversi comparti economici e svariate mansioni. Nel fare questo è possibile fare riferimento, e testare nuovamente, un modello che indica la corretta percezione del rischio (conoscenza) come fattore necessario, ma non sufficiente per ottenere, con la mediazione di atteggiamenti favorevoli allo specifico comportamento, azioni sicure, attraverso le quali si rinforza l’atteggiamento e migliorano le conoscenze. La formazione, per raggiungere i propri obiettivi, deve tuttavia agire anche sui meccanismi di conformismo sociale favorevoli alla safety, questi originano da conoscenze e azioni sicure e reciprocamente le rinforzano.