On the contribution of information and communication technology to productivity growth in Australia

This paper revisits the so-called ‘ICT-productivity paradox’ from a long-run perspective by using annual Australian data for 1965–2013. It provides estimates of long-run and short-run elasticities of labour productivity with respect to ICT capital deepening, and explores the nature of long-run causality among productivity growth and ICT and non-ICT capital deepening. The estimates of long-run elasticities are derived by employing both time-series and panel data econometric techniques. The empirical results provide strong confirmatory evidence of the long-run impact of ICT capital deepening on labour productivity in Australia.

Increasing Australian impoundment fisheries potential - Habitat enhancement to improve angling and productivity in impoundments

To investigate strategies for increasing Australian impoundment fisheries productivity and improving recreational angling and regional economic growth

Polybridge Technical Report

This study examined the physical and chemical properties of a novel, fully-recirculated prawn and polychaete production system that incorporated polychaete-assisted sand filters (PASF). The aims were to assess and demonstrate the potential of this system for industrialisation, and to provide optimisations for wastewater treatment by PASF. Two successive seasons were studied at commercially-relevant scales in a prototype system constructed at the Bribie Island Research Centre in Southeast Queensland. The project produced over 5.4 tonnes of high quality black tiger prawns at rates up to 9.9 tonnes per hectare, with feed conversion of up to 1.1. Additionally, the project produced about 930 kg of high value polychaete biomass at rates up to 1.5 kg per square metre of PASF, with the worms feeding predominantly on waste nutrients. Importantly, this closed production system demonstrated rapid growth of healthy prawns at commercially relevant production levels, using methods that appear feasible for application at large scale. Deeper (23 cm) PASF beds provided similar but more reliable wastewater treatment efficacies compared with shallower (13 cm) beds, but did not demonstrate significantly greater polychaete productivity than (easier to harvest) shallow beds. The nutrient dynamics associated with seasonal and tidal operations of the system were studied in detail, providing technical and practical insights into how PASF could be optimised for the mitigation of nutrient discharge. The study also highlighted some of the other important advantages of this integrated system, including low sludge production, no water discharge during the culture phase, high ecosystem health, good prospects for biosecurity controls, and the sustainable production of a fishery-limited resource (polychaetes) that may be essential for the expansion of prawn farming industries throughout the world. Regarding nutrient discharge from this prototype mariculture system, when PASF was operating correctly it proved feasible to have no water (or nutrient) discharge during the entire prawn growing season. However, the final drain harvest and emptying of ponds that is necessary at the end of the prawn farming season released 58.4 kg ha-1 of nitrogen and 6 kg ha-1 of phosphorus (in Season 2). Whilst this is well below (i.e., one-third to one-half of) the current load-based licencing conditions for many prawn farms in Australia, the levels of nitrogen and chlorophyll a in the ponds remained higher than the more-stringent maximum limits at the Bribie Island study site. Zero-net-nutrient discharge was not achieved, but waste nutrients were low where 5.91 kg of nitrogen and 0.61 kg of phosphorus was discharged per tonne of prawns produced. This was from a system that deployed PASF at 14.4% of total ponded farm area which treated an average of 5.8% of pond water daily and did not use settlement ponds or other natural or artificial water remediation systems. Four supplemental appendices complement this research by studying several additional aspects that are central to the industrialisation of PASF. The first details an economic model and decision tool which allows potential users to interactively assess construction and operational variables of PASF at different scales. The second provides the qualitative results of a prawn maturation trial conducted collaboratively with the Commonwealth Scientific and Industrial Research Organisation (CSIRO) to assess dietary inclusions of PASF-produced worms. The third provides the reproductive results from industry-based assessments of prawn broodstock produced using PASF. And the fourth appendix provides detailed elemental and nutritional analyses of bacterial biofilm produced by PASF and assesses its potential to improve the growth of prawns in recirculated culture systems.

Essays on Russia's Economic Transition

This study comprises an introductory section and three essays analysing Russia's economic transition from the early 1990s up to the present. The papers present a combination of both theoretical and empirical analysis on some of the key issues Russia has faced during its somewhat troublesome transformation from state-controlled command economy to market-based economy. The first essay analyses fiscal competition for mobile capital between identical regions in a transition country. A standard tax competition framework is extended to account for two features of a transition economy: the presence of two sectors, old and new, which differ in productivity; and a non-benevolent regional decision-maker. It is shown that in very early phase of transition, when the old sector clearly dominates, consumers in a transition economy may be better off in a competitive equilibrium. Decision-makers, on the other hand, will prefer to coordinate their fiscal policies. The second essay uses annual data for 1992-2003 to examine income dispersion and convergence across 76 Russian regions. Wide disparities in income levels have indeed emerged during the transition period. Dispersion has increased most among the initially better-off regions, whereas for the initially poorer regions no clear trend of divergence or convergence could be established. Further, some - albeit not highly robust - evidence was found of both unconditional and conditional convergence, especially among the initially richer regions. Finally, it is observed that there is much less evidence of convergence after the economic crisis of 1998. The third essay analyses industrial firms' engagement in provision of infrastructure services, such as heating, electricity and road maintenance. Using a unique dataset of 404 large and medium-sized industrial enterprises in 40 regions of Russia, the essay examines public infrastructure provision by Russian industrial enterprises. It is found that to a large degree engagement in infrastructure provision, as proxied by district heating production, is a Soviet legacy. Secondly, firms providing district heating to users outside their plant area are more likely to have close and multidimensional relations with the local public sector.

Essays on Finnish Economic Growth and Productivity, 1860-2005

This study examines Finnish economic growth. The key driver of economic growth was productivity. And the major engine of productivity growth was technology, especially the general purpose technologies (GPTs) electricity and ICT. A new GPT builds on previous knowledge, yet often in an uncertain, punctuated, fashion. Economic history, as well as the Finnish data analyzed in this study, teaches that growth is not a smooth process but is subject to episodes of sharp acceleration and deceleration which are associated with the arrival, diffusion and exhaustion of new general purpose technologies. These are technologies that affect the whole economy by transforming both household life and the ways in which firms conduct business. The findings of previous research, that Finnish economic growth exhibited late industrialisation and significant structural changes were corroborated by this study. Yet, it was not solely a story of manufacturing and structural change was more the effect of than the cause for economic growth. We offered an empirical resolution to the Artto-Pohjola paradox as we showed that a high rate of return on capital was combined with low capital productivity growth. This result is important in understanding Finnish economic growth 1975-90. The main contribution of this thesis was the growth accounting results on the impact of ICT on growth and productivity, as well as the comparison of electricity and ICT. It was shown that ICT s contribution to GDP growth was almost twice as large as electricity s contribution over comparable periods of time. Finland has thus been far more successful as an ICT producer than a producer of electricity. Unfortunately in the use of ICT the results were still more modest than for electricity. During the end of the period considered in this thesis, Finland switched from resource-based to ICT-based growth. However, given the large dependency on the ICT-producing sector, the ongoing outsourcing of ICT production to low wage countries provides a threat to productivity performance in the future. For a developed country only change is constant and history teaches us that it is likely that Finland is obliged to reorganize its economy once again in the digital era.

The role of productivity in the ecological and evolutionary dynamics of predator-prey interaction

Productivity is predicted to drive the ecological and evolutionary dynamics of predator-prey interaction through changes in resource allocation between different traits. However, resources are seldom constantly available and thus temporal variation in productivity could have considerable effect on the species' potential to evolve. To study this, three long-term microbial laboratory experiments were established where Serratia marcescens prey bacteria was exposed to predation of protist Tetrahymena thermophila in different prey resource environments. The consequences of prey resource availability for the ecological properties of the predator-prey system, such as trophic dynamics, stability, and virulence, were determined. The evolutionary changes in species traits and prey genetic diversity were measured. The prey defence evolved stronger in high productivity environment. Increased allocation to defence incurred cost in terms of reduced prey resource use ability, which probably constrained prey evolution by increasing the effect of resource competition. However, the magnitude of this trade-off diminished when measured in high resource concentrations. Predation selected for white, non-pigmented, highly defensive prey clones that produced predation resistant biofilm. The biofilm defence was also potentially accompanied with cytotoxicity for predators and could have been traded off with high motility. Evidence for the evolution of predators was also found in one experiment suggesting that co-evolutionary dynamics could affect the evolution and ecology of predator-prey interaction. Temporal variation in resource availability increased variation in predator densities leading to temporally fluctuating selection for prey defences and resource use ability. Temporal variation in resource availability was also able to constrain prey evolution when the allocation to defence incurred high cost. However, when the magnitude of prey trade-off was small and the resource turnover was periodically high, temporal variation facilitated the formation of predator resistant biofilm. The evolution of prey defence constrained the transfer of energy from basal to higher trophic levels, decreasing the strength of top-down regulation on prey community. Predation and temporal variation in productivity decreased the stability of populations and prey traits in general. However, predation-induced destabilization was less pronounced in the high productivity environment where the evolution of prey defence was stronger. In addition, evolution of prey defence weakened the environmental variation induced destabilization of predator population dynamics. Moreover, protozoan predation decreased the S. marcescens virulence in the insect host moth (Parasemia plantaginis) suggesting that species interactions outside the context of host-pathogen relationship could be important indirect drivers for the evolution of pathogenesis. This thesis demonstrates that rapid evolution can affect various ecological properties of predator-prey interaction. The effect of evolution on the ecological dynamics depended on the productivity of the environment, being most evident in the constant environments with high productivity.

The ghost in the city industrial complex: Le Corbusier and the fascist theory of Urbanisme

Le Corbusier participated in an urban dialogue with the first group in France to call itself fascist: the journalist Georges Valois’s militant Faisceau des Combattants et Producteurs (1925-1927), the “Blue Shirts,” inspired by the Italian “Fasci” of Mussolini. Le Corbusier’s portrait photograph materialised on the front cover of the January 1927 issue of the Faisceau League’s newspaper Le Nouveau Siècle edited by the former anarcho-syndicalist journalist Georges Valois, its leader, who fashioned himself as the French Mussolini. Le Corbusier was described in the Revue as one of les animateurs (the “organisers”) of the Party1 – meaning a member of the technical elite who would drive the Faisceau’s plans. On 1 May 1927, the Nouveau Siècle printed a full-page feature “Le Plan Voisin” on Le Corbusier’s 1922 redesign of Paris : the architect’s single-point perspective sketch appeared below an extract lifted from the architect’s original polemic Le Centre de Paris on the pages of Le Corbusier’s second book Urbanisme published two years earlier, a treatise on urbanism.2 Three weeks later, Le Corbusier presented a slide show of his urban plans at a fascist rally for the inauguration of the Faisceau’s new headquarters on the rue du faubourg Poissonniere, thereby crystalising the architect’s hallowed status in the league...

Ultrastructure of Biofilms Formed by Bacteria from Industrial Processes

Microorganisms exist predominantly as sessile multispecies communities in natural habitats. Most bacterial species can form these matrix-enclosed microbial communities called biofilms. Biofilms occur in a wide range of environments, on every surface with sufficient moisture and nutrients, also on surfaces in industrial settings and engineered water systems. This unwanted biofilm formation on equipment surfaces is called biofouling. Biofouling can significantly decrease equipment performance and lifetime and cause contamination and impaired quality of the industrial product. In this thesis we studied bacterial adherence to abiotic surfaces by using coupons of stainless steel coated or not coated with fluoropolymer or diamond like carbon (DLC). As model organisms we used bacterial isolates from paper machines (Meiothermus silvanus, Pseudoxanthomonas taiwanensis and Deinococcus geothermalis) and also well characterised species isolated from medical implants (Staphylococcus epidermidis). We found that coating of steel surface with these materials reduced its tendency towards biofouling: Fluoropolymer and DLC coatings repelled all four biofilm formers on steel. We found great differences between bacterial species in their preference of surfaces to adhere as well as their ultrastructural details, like number and thickness of adhesion organelles they expressed. These details responded differently towards the different surfaces they adhered to. We further found that biofilms of D. geothermalis formed on titanium dioxide coated coupons of glass, steel and titanium, were effectively removed by photocatalytic action in response to irradiation at 360 nm. However, on non-coated glass or steel surfaces irradiation had no detectable effect on the amount of bacterial biomass. We showed that the adhesion organelles of bacteria on illuminated TiO2 coated coupons were complety destroyed whereas on non-coated coupons they looked intact when observed by microscope. Stainless steel is the most widely used material for industrial process equipments and surfaces. The results in this thesis showed that stainless steel is prone to biofouling by phylogenetically distant bacterial species and that coating of the steel may offer a tool for reduced biofouling of industrial equipment. Photocatalysis, on the other hand, is a potential technique for biofilm removal from surfaces in locations where high level of hygiene is required. Our study of natural biofilms on barley kernel surfaces showed that also there the microbes possessed adhesion organelles visible with electronmicroscope both before and after steeping. The microbial community of dry barley kernels turned into a dense biofilm covered with slimy extracellular polymeric substance (EPS) in the kernels after steeping in water. Steeping is the first step in malting. We also presented evidence showing that certain strains of Lactobacillus plantarum and Wickerhamomyces anomalus, when used as starter cultures in the steeping water, could enter the barley kernel and colonise the tissues of the barley kernel. By use of a starter culture it was possible to reduce the extensive production of EPS, which resulted in a faster filtration of the mash.

Pulp and Paper Fiction: On the Discursive Legitimation of Global Industrial Restructuring

Despite the central role of legitimacy in social and organizational life, we know little of the subtle meaning-making processes through which organizational phenomena, such as industrial restructuring, are legitimated in contemporary society. Therefore, this paper examines the discursive legitimation strategies used when making sense of global industrial restructuring in the media. Based on a critical discourse analysis of extensive media coverage of a revolutionary pulp and paper sector merger, we distinguish and analyze five legitimation strategies: (1) normalization, (2) authorization, (3) rationalization, (4) moralization, and (5) narrativization. We argue that while these specific legitimation strategies appear in individual texts, their recurring use in the intertextual totality of the public discussion establishes the core elements of the emerging legitimating discourse.

The Nature and Change of Bonds in Industrial Business Relationships

A focus on cooperative industrial business relationships has become increasingly important in studies of industrial relationships. If the relationships between companies are strong it is usually a sign that companies will cooperate for a longer time and that may affect companies’ competitive and financial strength positively. As a result the bonds between companies become more important. This is due to the fact that bonds are building blocks of relationships and thus affect the stability in the cooperation between companies. Bond strength affect relationship strength. A framework regarding how bonds develop and change in an industrial business relationship has been developed in the study. Episodes affect the bonds in the relationship strengthening or weakening the bonds in the relationship or preserving status quo. Routine or critical episodes may lead to the strengthening or weakening of bonds as well as the preservation of status quo. The method used for analyzing bond strength trying to grasp the nature and change of bonds was invented by systematically following the elements of the definitions of bonds. A system with tables was drawn up in order to find out if the bond was weak, of medium strength or strong. Bonds are important regulators of industrial business relationships. By influencing the bonds one may have possibilities to strengthen or weaken the business relationship. Strengthen the business relationship in order to increase business and revenue and weaken the relationship in order to terminate business where the revenue is low or where there may be other problems in the relationship. By measuring the strength of different bonds it can be possible to strengthen weak bonds in order to strengthen the relationship. By using bond management it is possible to strategically strengthen or weaken the bonds between the cooperating companies in order to strengthen the cooperation and tie the customer or supplier to the company or weaken the cooperation in order to terminate the relationship. The instrument for the management of bonds is to use the created bond audit in order to know which bonds resources should be focused on in order to increase or decrease their strength.

Service Productivity: Toward a Conceptualisation of the Transformation of inputs

The productivity of a process is related to how effectively input resources are transformed into value for customers. For the needs of manufacturers of physical products there are widely used productivity concepts and measurements instruments. However, in service processes the underlying assumptions of these concepts and models do not hold. For example, manufacturing-based productivity models assume that an altered configuration of input resources in the production process does not lead to quality changes in outputs (the constant-quality assumption). However, in a service context changes in the production resources and productions systems do affect the perceived quality of services. Therefore, using manufacturing-oriented productivity models in service contexts are likely to give managers wrong directions for action. Research into the productivity of services is still scarce, because of the lack of viable models. The purpose of the present article is to analyse the requirements for the development of a productivity concept for service operations. Based on the analysis, a service productivity model is developed. According to this model, service productivity is a function of 1) how effectively input resources into the service (production) process are transformed to outputs in the form of services (internal or cost efficiency), 2) how well the quality of the service process and its outcome is perceived (external or revenue efficiency), and 3) how effectively the capacity of the service process is utilised (capacity efficiency). In addition, directions for developing measurement models for service productivity are discussed.

Customer Needing - Conceptualising Industrial Service from a Customer Perspective

Views on industrial service have conceptually progressed from the output of the provider’s production process to the result of an interaction process in which the customer also is involved. Although there are attempts to be customer-oriented, especially when the focus is on solutions, an industrial company’s offering combining goods and services is inherently seller-oriented. There is, however, a need to go beyond the current literature and company practices. We propose that what is needed is a genuinely customer-based parallel concept to offering that takes the customer’s view and put forward a new concept labelled customer needing. A needing is based on the customer’s mental model of their business and strategies which will affect priorities, decisions, and actions. A needing can be modelled as a configuration of three dimensions containing six functions that create realised value for the customer. These dimensions and functions can be used to describe needings which represent starting points for sellers’ creation of successful offerings. When offerings match needings over time the seller should have the potential to form and sustain successful buyer relationships.