FPC current marketing strategy

Direct Research Internship Course

O processo de dádiva de sangue do dador de primeira vez no Hospital do Espírito Santo - Évora, EPE : satisfação e retorno para a dádiva seguinte

RESUMO - Introdução: Com este trabalho, pretendeu-se averiguar em que medida a satisfação no processo de dádiva de sangue afeta o regresso dos dadores que doam pela primeira vez na vida, ou que se apresentaram pela primeira vez no Serviço de sangue do HESE. Material e métodos: Estudo observacional transversal descritivo. Dos dadores com uma única inscrição no período de 2011 a 2012 inclusive, (531+541 dadores) foram retirados os que entretanto completaram 66 anos (idade limite para a dádiva); os que não tinham contacto telefónico válido; e os que tinham morada fora do Distrito de Évora. Os dadores restantes (327 + 330 dadores), foram então inquiridos através de um questionário efetuado telefonicamente para determinar as causas de não regresso. Resultados: Obtiveram-se 360 respostas válidas ao questionário, correspondentes a 50% da amostra com um IC de 95%. Apesar de estar amplamente demonstrado que a satisfação na dádiva contribui decisivamente para o retorno à dádiva seguinte, apenas 12% da amostra referiu não regressar por algum motivo de insatisfação decorrente do processo de dádiva. Evidentemente, o mérito destes resultados é devido à equipa do Serviço de Imunohemoterapia do HESE. Porém uma outra realidade fica aqui patente, os dadores de primeira vez estão a decrescer há vários anos, e destes, os que regressam são cada vez menos. A manter-se esta tendência, a taxa de renovação da bolsa de dadores poderá tornar-se insuficiente para a manutenção da atual bolsa de dadores. Se o HESE conseguisse recuperar para a dádiva metade da amostra de dadores de primeira vez que não regressam, a sua autonomia em termos de consumo de sangue sairia reforçada, com o incremento de proveitos financeiros consequente. Conclusão: Este trabalho concretiza os objetivos a que se propôs, nomeadamente o de produzir conhecimento útil e de suporte à decisão no âmbito da administração hospitalar. O HESE tem agora ao seu dispor, a caraterização dos dadores de primeira vez e a descrição de como se está a processar a renovação da sua bolsa de dadores.

Current status of herpesvirus identification in the oral cavity of HIV-infected children

INTRODUCTION: Some viruses of the Herpesviridae family are frequently the etiologic agents of oral lesions associated with HIV. The aim of this study was to identify the presence of herpes simplex virus types 1 and 2 (HSV-1, HSV-2), Varicella Zoster virus (VZV), Epstein-Barr virus (EBV), human cytomegalovirus (HCMV), human herpesvirus type 6, type 7 and type 8 (HHV-6, HHV-7 and HHV-8) in the oral cavity of HIV-infected children/adolescents and verify the association between viral subtypes and clinical factors. METHODS: The cells of oral mucosa were collected from 50 HIV infected children/adolescents, 3-13 years old (mean age 8.66). The majority (66%) of selected were girls, and they were all outpatients at the pediatric AIDS clinic of a public hospital in Rio de Janeiro. Nested-PCR was used to identify the viral types. RESULTS: Absence of immunosuppression was observed in 66% of the children. Highly active antiretroviral therapy (HAART) was used by 72.1% of selected and moderate viral load was observed in 56% of the children/adolescents. Viral types were found in 86% of the children and the subtypes were: HSV-1 (4%), HSV-2 (2%), VZV (4%), EBV (0%), HCMV (24%), HHV6 (18%), HHV-7 (68%), HHV8 (0%). CONCLUSIONS: The use of HAART has helped to reduce oral lesions, especially with herpes virus infections. The health professionals who work with these patients should be aware of such lesions because of their predictive value and the herpes virus can be found circulating in the oral cavity without causing lesions.

Predicting market direction with hidden Markov models

This paper develops the model of Bicego, Grosso, and Otranto (2008) and applies Hidden Markov Models to predict market direction. The paper draws an analogy between financial markets and speech recognition, seeking inspiration from the latter to solve common issues in quantitative investing. Whereas previous works focus mostly on very complex modifications of the original hidden markov model algorithm, the current paper provides an innovative methodology by drawing inspiration from thoroughly tested, yet simple, speech recognition methodologies. By grouping returns into sequences, Hidden Markov Models can then predict market direction the same way they are used to identify phonemes in speech recognition. The model proves highly successful in identifying market direction but fails to consistently identify whether a trend is in place. All in all, the current paper seeks to bridge the gap between speech recognition and quantitative finance and, even though the model is not fully successful, several refinements are suggested and the room for improvement is significant.

Structured products in the current low interest rate environment

Directed Research Internship

How do current term structure model behave beyond the last liquid point?: A comparison of the DNS and Smith-Wilson methods

A Work Project, presented as part of the requirements for the Award of a Master’s Double Degree in Finance from Maastricht University and NOVA – School of Business and Economics

The effectiveness of the “Processo Especial de Revitalização” as an instrument of corporate restructuring in the context of the current economic crisis

This work project intends to evaluate the effectiveness of the Portuguese Government’s strategy to promote the orderly deleveraging of the corporate sector in the context of the current economic crisis. The recommendations of the Troika and the commitments assumed under the Memorandum of Understanding signed by the Government in 2011 required the creation of formal processes to avoid disorderly deleveraging. Conclusions and recommendations were drawn based on past experiences of large-scale corporate restructuring strategies in other countries and on the analysis of financial and statistical data on companies applying for “Programa Especial de Revitalização”.

Current epidemiological profile of Chagasic megaesophagus in Central Brazil

Introduction Chagasic megaesophagus (CM) is the most common digestive manifestation of Chagas disease in Brazil, and the State of Goiás is one of the most affected regions. In recent decades, the Hospital das Clínicas (HC)/Universidade Federal de Goiás (UFG) has been a reference center for the study and treatment of CM. The objective of this study was to characterize the current epidemiological profile of patients with CM observed at the HC of the UFG from 1998 to 2010. Methods In total, 939 patient records were analyzed, and age, gender, place of birth, serology, symptoms and radiological classification according to Rezende et al. were analyzed. Results The median patient age was 55 years. Male patients were more (54%) prevalent than female patients. The prevalence of younger patients (less than 31 years of age) was 4.2%, but 82.1% of the younger patients were from State of Bahia. Patients older than 40 years were the majority (85.5%). The radiological groups were distributed as follows: Group I (35.9%), Group II (32.9%), Group III (17%) and Group IV (14.2%). Conclusions Compared with previous studies by the same group in 1975, 1994 and 1995, the number of younger patients decreased, and the frequency curve has shifted to older patients.

The quest for growth in the German organic food retail market: Historical trends, current strategies, and future outlook

This paper aims to provide strategies for the organic supermarket chain “Alnatura” to shape the demand and its market share of the organic food & beverage (F&B) market in Germany within the next five years. Through the historic evolution and the current market assessment of Germany, compared to a benchmark country (US), as well as prospective trends in Germany, reasons and opportunities for market growth are evaluated. In addition, an industry attractiveness, competitor and company analysis is executed. Based on those findings and a conducted survey, suggestions to adjust Alnatura´s current business strategies are deduced and finally examined on its risk and feasibility.

Men's grooming in Germany: A consumer research and discussion of current consumer attitudes

The objective of this dissertation was to explore the German men’s grooming market and to discuss the usage and purchase behavior of young male adults. After a brief market analysis, this dissertation evaluates the results of qualitative and quantitative research. The conducted research explored the consumer’s reasoning for and attitude towards personal grooming, and their attitude towards product attributes and the aging process. The dissertation concludes that men attach high value to personal grooming but only to the extent that their personal need is satisfied. As the male involvement in MG is highly dependent on each consumer’s individual needs, the market requires a careful segmentation.

Multipacket reception in the presence of in-band full-duplex communication

In-Band Full-DupleX (IB-FDX) is defined as the ability for nodes to transmit and receive signals simultaneously on the same channel. Conventional digital wireless networks do not implement it, since a node’s own transmission signal causes interference to the signal it is trying to receive. However, recent studies attempt to overcome this obstacle, since it can potentially double the spectral efficiency of current wireless networks. Different mechanisms exist today that are able to reduce a significant part of the Self- Interference (SI), although specially tuned Medium Access Control (MAC) protocols are required to optimize its use. One of IB-FDX’s biggest problems is that the nodes’ interference range is extended, meaning the unusable space for other transmissions and receptions is broader. This dissertation proposes using MultiPacket Reception (MPR) to address this issue and adapts an already existing Single-Carrier with Frequency-Domain Equalization (SC-FDE) receiver to IB-FDX. The performance analysis suggests that MPR and IB-FDX have a strong synergy and are able to achieve higher data rates, when used together. Using analytical models, the optimal transmission patterns and transmission power were identified, which maximize the channel capacity with the minimal energy consumption. This was used to define a new MAC protocol, named Full-duplex Multipacket reception Medium Access Control (FM-MAC). FM-MAC was designed for a single-hop cellular infrastructure, where the Access Point (AP) and the terminals implement both IB-FDX and MPR. It divides the coverage range of the AP into a closer Full-DupleX (FDX) zone and a farther Half-DupleX (HDX) zone and adds a tunable fairness mechanism to avoid terminal starvation. Simulation results show that this protocol provides efficient support for both HDX and FDX terminals, maximizing its capacity when more FDX terminals are used.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Optimization of wastewater quality in the Sines refinery

In order to address and resolve the wastewater contamination problem of the Sines refinery with the main objective of optimizing the quality of this stream and reducing the costs charged to the refinery, a dynamic mass balance was developed nd implemented for ammonia and polar oil and grease (O&G) contamination in the wastewater circuit. The inadequate routing of sour gas from the sour water stripping unit and the kerosene caustic washing unit, were identified respectively as the major source of ammonia and polar substances present in the industrial wastewater effluent. For the O&G content, a predictive model was developed for the kerosene caustic washing unit, following the Projection to Latent Structures (PLS) approach. Comparison between analytical data for ammonia and polar O&G concentrations in refinery wastewater originating from the Dissolved Air Flotation (DAF) effluent and the model predictions of the dynamic mass balance calculations are in a very good agreement and highlights the dominant impact of the identified streams for the wastewater contamination levels. The ammonia contamination problem was solved by rerouting the sour gas through an existing clogged line with ammonia salts due to a non-insulated line section, while for the O&G a dynamic mass balance was implemented as an online tool, which allows for prevision of possible contamination situations and taking the required preventive actions, and can also serve as a basis for establishing relationships between the O&G contamination in the refinery wastewater with the properties of the refined crude oils and the process operating conditions. The PLS model developed could be of great asset in both optimizing the existing and designing new refinery wastewater treatment units or reuse schemes. In order to find a possible treatment solution for the spent caustic problem, an on-site pilot plant experiments for NaOH recovery from the refinery kerosene caustic washing unit effluent using an alkaline-resistant nanofiltration (NF) polymeric membrane were performed in order to evaluate its applicability for treating these highly alkaline and contaminated streams. For a constant operating pressure and temperature and adequate operating conditions, 99.9% of oil and grease rejection and 97.7% of chemical oxygen demand (COD) rejection were observed. No noticeable membrane fouling or flux decrease were registered until a volume concentration factor of 3. These results allow for NF permeate reuse instead of fresh caustic and for significant reduction of the wastewater contamination, which can result in savings of 1.5 M€ per year at the current prices for the largest Portuguese oil refinery. The capital investments needed for implementation of the required NF membrane system are less than 10% of those associated with the traditional wet air oxidation solution of the spent caustic problem. The operating costs are very similar, but can be less than half if reusing the NF concentrate in refinery pH control applications. The payback period was estimated to be 1.1 years. Overall, the pilot plant experimental results obtained and the process economic evaluation data indicate a very competitive solution through the proposed NF treatment process, which represents a highly promising alternative to conventional and existing spent caustic treatment units.

Comprehensive comparison of a current-source and a voltage-source converter for three-phase EV fast battery chargers

This paper presents a comprehensive comparison of a current-source converter and a voltage-source converter for three-phase electric vehicle (EV) fast battery chargers. Taking into account that the current-source converter (CSC) is a natural buck-type converter, the output voltage can assume a wide range of values, which varies between zero and the maximum instantaneous value of the power grid phase-to-phase voltage. On the other hand, taking into account that the voltage-source converter (VSC) is a natural boost-type converter, the output voltage is always greater than the maximum instantaneous value of the power grid phase-to-phase voltage, and consequently, it is necessary to use a dc-dc buck-type converter for applications as EV fast battery chargers. Along the paper is described in detail the principle of operation of both the CSC and the VSC for EV fast chargers, as well as the main equations of the power theory and current control strategies. The comparison between both converters is mainly established in terms of the total harmonic distortion of the grid current and the estimated efficiency for a range of operation between 10 kW and 50 kW.

Three-phase three-level current-source converter for EVs fast battery charging systems

This paper presents a three-phase three-level fast battery charger for electric vehicles (EVs) based in a current-source converter (CSC). Compared with the traditional voltage-source converters used for fast battery chargers, the CSC can be seen as a natural buck-type converter, i.e., the output voltage can assume a wide range of values, which varies between zero and the maximum instantaneous value of the power grid phase-to-phase voltage. Moreover, using the CSC it is not necessary to use a dc-dc back-end converter in the battery side, and it is also possible to control the grid current in order to obtain a sinusoidal waveform, and in phase with the power grid voltage (unitary power factor). Along the paper is described in detail the proposed CSC for EVs fast battery charging systems: the circuit topology, the power control theory, the current control strategy and the grid synchronization algorithm. Several simulation results of the EV fast battery charger operating with a maximum power of 50 kW are presented.