Mercados laborales en entornos de conflictos armados: un análisis empírico para Colombia

Históricamente se ha reconocido que los conflictos internos afectan de manera directa variables a nivel individual como la salud de las personas, los niveles de escolaridad y el desplazamiento forzoso de los afectados. Sin embargo, solo hasta la última década las investigaciones académicas se han inclinado en documentar y cuantificar rigurosamente los efectos colaterales de la violencia sobre las condiciones de vida de los individuos. La presente investigación estudia cómo la exposición al conflicto en Colombia ha afectado las decisiones en términos de mercado laboral de las personas. La estrategia de identificación internaliza los reconocidos problemas de endogeneidad del conflicto con variables de actividad y desarrollo económico y presenta resultados robustos a fenómenos de migración interna y desplazamiento. En términos de participación laboral y desempleo, se encuentran efectos heterogéneos a nivel de género como respuestas a la violencia experimentada. En particular, la probabilidad de participación laboral de las mujeres se incremente como consecuencia de la exposición al conflicto, mientras que la de desempleo disminuye. Para los hombres, los resultados muestran una menor probabilidad de participación, efecto contrario al de las mujeres, y un efecto análogo en términos de desempleo. La investigación no encuentra efectos diferenciales en términos de informalidad laboral.

Rock pool.

En las costas rocosas hay rocas que forman como piscinas que quedan cubiertas por las mareas que son las que llevan el oxígeno y los alimentos a docenas de diferentes animales y plantas. Muchos de esos animales se refugian bajo las rocas y entre las algas marinas a fin de que sus cuerpos no se sequen antes de que la marea suba de nuevo.

El aprendizaje de la lectura como agente innovador.

Conseguir en el niño de Preescolar y ciclo inicial unas destrezas encaminadas al aprendizaje y posterior adquisición de la lecto-escritura. Tres grupos de niños que han terminado el primer nivel del ciclo inicial, corresponden al Colegio Público Adolfo Martínez Chicano, de Las Pedroñeras (Cuenca), colegios públicos de Belmonte, El Pedernoso y un grupo experimental. Se parte de la definición del método de Gun Avanzini. Se toma como núcleo central de la experiencia una situación vivida, una emoción sentida, la observación de la realidad, que se traduce en lenguaje oral. Las restantes disciplinas se traducen o parten del lenguaje oral y cada una de ellas, se relaciona con las restantes de forma que ningún aspecto queda aislado. Se establecen unas pautas sobre la innovación de aspectos como la disposición de espacios, el uso de los instrumentos pedagógicos, la periodización del tiempo escolar u objetivos específicos. Otro bloque para mostrar los procesos en las diferentes áreas: Matemáticas, Lenguaje, Plástica, Educación Musical, Educación Corporal. El trabajo se diseña, no para cada ciclo ni cada nivel, sino para un período de 4 cursos. El material utilizado es muy variado, va desde el comercializado, hasta el construido por el profesor e incluso inventado. La evaluación de la primera generación de alumnos se hizo solamente cuando el proceso estaba ya terminado y con métodos caseros. Los resultados obtenidos tienen un valor anecdótico por la forma en que fueron elaboradas. En comprensión lectora, cuando los niños llegan al primer nivel del ciclo inicial, ya han sido iniciados en el aprendizaje de la lecto-escritura. Unos grupos han sido iniciados en lectura por métodos sintéticos, otro por el global. No en todos los grupos se obtienen resultados significativos. Si desde una perspectiva científica experimental no puede afirmarse la superioridad de un método sobre otro, los análisis precedentes ponen suficientemente en evidencia el hecho de que el método global responde mucho mejor que el silábico (sintéticos) a la modalidad del desarrollo de la inteligencia infantil.

Evolutionary bi-stability in pathogen transmission mode

Many pathogens transmit to new hosts by both infection (horizontal transmission) and transfer to the infected host's offspring (vertical transmission). These two transmission modes require speci®c adap- tations of the pathogen that can be mutually exclusive, resulting in a trade-off between horizontal and vertical transmission. We show that in mathematical models such trade-offs can lead to the simultaneous existence of two evolutionary stable states (evolutionary bi-stability) of allocation of resources to the two modes of transmission. We also show that jumping between evolutionary stable states can be induced by gradual environmental changes. Using quantitative PCR-based estimates of abundance in seed and vege- tative parts, we show that the pathogen of wheat, Phaeosphaeria nodorum, has jumped between two distinct states of transmission mode twice in the past 160 years, which, based on published evidence, we interpret as adaptation to environmental change. The ®nding of evolutionary bi-stability has impli- cations for human, animal and other plant diseases. An ill-judged change in a disease control programme could cause the pathogen to evolve a new, and possibly more damaging, combination of transmission modes. Similarly, environmental changes can shift the balance between transmission modes, with adverse effects on human, animal and plant health.

A netball specific fitness test.

Performance analysis has been used for many applications including providing feedback to coaches and players, media applications, scoring of sports performance and scientific research into sports performance. The current study has used performance analysis to generate knowledge relating to the demands of netball competition which has been used in the development of a Netball Specific Fitness Test (NSFT). A modified version of the Bloomfield movement classification was used to provide a detailed analysis of player movement during netball competition. This was considered during a needs analysis when proposing the structure of the NSFT. A series of pilot versions were tested during an evolutionary prototyping process that resulted in the final version of the NSFT, which was found to be representative of movement in netball competition and it distinguished between recreational club players and players of university first team level or above. The test is incremental and involves forward, backward and sideways movement, jumping, lunging, turning and choice reaction.

Equine anthelmintics: survey of the patterns of use, beliefs and attitudes among horse owners in the UK

An online survey was conducted to establish horse owners' beliefs, attitudes and practices relating to the use of anthelmintic drugs. Out of a total of 574 respondents, 89 per cent described themselves as ‘leisure riders’, most of whom took part in a variety of activities including eventing, show jumping, dressage, hunter trials, hunting, driving, endurance and showing. Overall, respondents were generally aware and concerned about the issue of anthelmintic resistance. Less than 60 per cent of all respondents were comfortable with their existing anthelmintic programme, and 25 per cent would like to reduce the use of anthelmintics in their horses. Of all the respondents, 47 per cent used livery, and 49 per cent of those reported that the livery imposed a common anthelmintic programme for horses kept on the premises; 45 per cent of these respondents were not entirely happy with the livery yard's programme. Less than 50 per cent of all respondents included ‘veterinary surgeon’ among their sources of advice on worming.

Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives

The current trend toward minimal-invasive dentistry has introduced innovative techniques for cavity preparation. Chemical vapor deposition (CVD) and laser-irradiation technology have been employed as an alternative to the common use of regular burs in high-speed turbines. Objectives. The purpose of this study was to assess the influence of alternative techniques for cavity preparation on the bonding effectiveness of different adhesives to dentin, and to evaluate the morphological characteristics of dentin prepared with those techniques. Methods. One etch&rinse adhesive (OptiBond FL, Kerr) and three self-etch systems (Adper Prompt L-Pop, 3M ESPE; Clearfil SE Bond, Kuraray; Clearfil S3 Bond, Kuraray) were applied on dentin prepared with a regular bur in a turbine, with a CVD bur in a turbine, with a CVD tip in ultrasound and with an ErCr:YSGG laser. The micro-tensile bond strength (mu TBS) was determined after storage in water for 24 h at 37 degrees C, and morphological evaluation was performed by means of field -emission -gun scanning electron microscopy (Feg-SEM). Results. Feg-SEM evaluation revealed different morphological features on the dentin surface after the usage of both the conventional and alternative techniques for cavity preparation, more specifically regarding smear-layer thickness and surface roughness. CVD bur-cut, CVD ultra-sonoabraded and laser-irradiated dentin resulted in lower mu TBSs than conventionally bur-cut dentin, irrespective of the adhesive employed. Significance. The techniques, such as CVD diamond-bur cutting, CVD diamond ultra-sonoabrasion and laser-irradiation, used for cavity preparation may affect the bonding effectiveness of adhesives to dentin, irrespective of their acidity or approach. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of Er,Cr : YSGG laser treatment on the microtensile bond strength of adhesives to dentin

Purpose: In light of the concept of minimally invasive dentistry, erbium lasers have been considered as an alternative technique to the use of diamond burs for cavity preparation. The purpose of this study was to assess the bonding effectiveness of adhesives to Er,Cr:YSGG laser-irradiated dentin using irradiation settings specific for cavity preparation. Materials and Methods: Fifty-four midcoronal dentin surfaces, obtained from sound human molars, were irradiated with an Er,Cr:YSGG laser or prepared with a diamond bur using a high-speed turbine. One etch-and-rinse (Optibond FL/Kerr) and three self-etching adhesives (Adper Prompt L-Pop/3M ESPE, Clearfil SE Bond/Kuraray, and Clearfil S-3 Bond/Kuraray) were used to bond the composite to dentin. The microtensile bond strength (mu TBS) was determined after 24 h of storage in water at 37 degrees C. The Kruskal-Wallis test was used to determine pairwise statistical differences (p < 0.05). Prepared dentin surfaces, adhesive interfaces, and failure patterns were analyzed using a stereo microscope and Field-emission gun Scanning Electron Microscopy (Feg-SEM). Results: Significantly lower mu TBS was observed to laser-irradiated than to bur-cut dentin (p < 0.05), irrespective of the adhesive employed. Feg-SEM photomicrographs of lased dentin revealed an imbricate patterned substrate and the presence of microcracks at the dentin surface. Conclusion: Morphological alterations produced by Er,Cr:YSGG laser-irradiation adversely influence the bonding effectiveness of adhesives to dentin. Keywords: dentin, adhesion, adhesives, laser, ErCr:YSGG.

Spider-fed bromeliads: seasonal and interspecific variation in plant performance

Background and Aims Several animals that live on bromeliads can contribute to plant nutrition through nitrogen provisioning (digestive mutualism). The bromeliad-living spider Psecas chapoda (Salticidae) inhabits and breeds on Bromelia balansae in regions of South America, but in specific regions can also appear on Ananas comosus (pineapple) plantations and Aechmea distichantha. Methods Using isotopic and physiological methods in greenhouse experiments, the role of labelled ((15)N) spider faeces and Drosophila melanogaster flies in the nutrition and growth of each host plant was evaluated, as well as seasonal variation in the importance of this digestive mutualism. Key Results Spiders contributed 0.6 +/- 0.2% (mean +/- s.e.; dry season) to 2.7 +/- 1% (wet season) to the total nitrogen in B. balansae, 2.4 +/- 0.4% (dry) to 4.1 +/- 0.3% (wet) in An. comosus and 3.8 +/- 0.4% (dry) to 5 +/- 1% (wet) in Ae. distichantha. In contrast, flies did not contribute to the nutrition of these bromeliads. Chlorophylls and carotenoid concentrations did not differ among treatments. Plants that received faeces had higher soluble protein concentrations and leaf growth (RGR) only during the wet season. Conclusions These results indicate that the mutualism between spiders and bromeliads is seasonally restricted, generating a conditional outcome. There was interspecific variation in nutrient uptake, probably related to each species` performance and photosynthetic pathways. Whereas B. balansae seems to use nitrogen for growth, Ae. distichantha apparently stores nitrogen for stressful nutritional conditions. Bromeliads absorbed more nitrogen coming from spider faeces than from flies, reinforcing the beneficial role played by predators in these digestive mutualisms.

Electrical, optical, and structural studies of shallow-buried Au-polymethylmethacrylate composite films formed by very low energy ion implantation

The authors present here a summary of their investigations of ultrathin films formed by gold nanoclusters embedded in polymethylmethacrylate polymer. The clusters are formed from the self-organization of subplantated gold ions in the polymer. The source of the low energy ion stream used for the subplantation is a unidirectionally drifting gold plasma created by a magnetically filtered vacuum arc plasma gun. The material properties change according to subplantation dose, including nanocluster sizes and agglomeration state and, consequently also the material electrical behavior and optical activity. They have investigated the composite experimentally and by computer simulation in order to better understand the self-organization and the properties of the material. They present here the results of conductivity measurements and percolation behavior, dynamic TRIM simulations, surface plasmon resonance activity, transmission electron microscopy, small angle x-ray scattering, atomic force microscopy, and scanning tunneling microscopy. (C) 2010 American Vacuum Society [DOI: 10.1116/1.3357287]

Morphology and Blue Photoluminescence Emission of PbMoO(4) Processed in Conventional Hydrothermal

PbMoO(4) micro-octahedrons were prepared by the coprecipitation method at room temperature without the presence of surfactants and processed in a conventional hydrothermal at different temperatures (from 60 to 120 degrees C) for 10 min. These micro-octahedrons were structurally characterized by X-ray diffraction (XRD) and micro-Raman (MR) spectroscopy, and its morphology was investigated by field-emission gun scanning electron microscopy (FEG-SEM). The optical properties were analyzed by ultraviolet-visible (UV-vis) absorption spectroscopy and photoluminescence (PL) measurements. XRD patterns and MR spectra confirmed that the PbMoO(4) micro-octahedrons are characterized by a scheelite-type tetragonal structure. FEG-SEM micrographs points, out that these structures present a polydisperse particle size distribution in consequence of a predominant growth mechanism via aggregation of particles. In addition, it was observed that the hydrothermal conditions favored a spontaneous formation of micro-octahedrons interconnected along a common crystallographic orientation (oriented-attachment), resulting in self-organized structures. An intense blue PL emission at room temperature was observed in these micro-octahedrons when they were excited with a 350 nm wavelength. The origin of the PL emissions as well as its intensity variations are explained by means of a model based on both distorted [MoO(4)] and [PbO(8)] clusters into the lattice.

Hierarchical Assembly of CaMoO(4) Nano-Octahedrons and Their Photoluminescence Properties

Hierarchical assemblies of CaMoO4 (CM) nano-octahedrons were obtained by microwave-assisted hydrothemial synthesis at 120 degrees C for different times. These structures were structurally, morphologically and optically characterized by X-ray diffraction, micro-Raman spectroscopy, field-emission gun scanning electron microscopy, ultraviolet-visible absorption spectroscopy and photoluminescence measurements. First-principle calculations have been carried out to understand the structural and electronic order-disorder effects as a function of the particle/region size. Supercells of different dimensions were constructed to simulate the geometric distortions along both they and z planes of the scheelite structure. Based on these experimental results and with the help of detailed structural simulations, we were able to model the nature of the order-disorder in this important class of materials and discuss the consequent implications on its physical properties, in particular, the photoluminescence properties of CM nanocrystals.

Effect of Different Solvent Ratios (Water/Ethylene Glycol) on the Growth Process of CaMoO(4) Crystals and Their Optical Properties

In this paper, calcium molybdate (CaMoO(4)) crystals (meso- and nanoscale) were synthesized by the coprecipitation method using different solvent volume ratios (water/ethylene glycol). Subsequently, the obtained suspensions were processed in microwave-assisted hydrothermal/solvothermal systems at 140 degrees C for 1 h. These meso- and nanocrystals processed were characterized by X-ray diffraction (X R I)), Fourier transform Raman (FT-Raman), Fourier transform infrared (FT-IR). ultraviolet visible (UV-vis) absorption spectroscopies, held-emission gun scanning electron microscopy (FEG-SEM). transmission electron microscopy (TEM). and photoluminescence (PL) measurements. X RI) patterns and FT-Raman spectra showed that these meso- and nanocrystals have a scheelite-type tetragonal structure without the presence of deleterious phases. FT-IR spectra exhibited a large absorption band situated at around 827 cm(-1), which is associated with the Mo-O anti-symmetric stretching vibrations into the [MoO(4)] clusters. FEG-SEM micrographs indicated that the ethylene glycol concentration in the aqueous solution plays an important role in the morphological evolution of CaMoO(4) crystals. High-resolution TEM micrographs demonstrated that the mesocrystals consist of several aggregated nanoparticles with electron diffraction patterns of monocrystal. In addition, the differences observed in the selected area electron diffraction patterns of CaMoO(4) crystals proved the coexistence of both nano- and mesostructures, First-principles quantum mechanical calculations based on the density functional theory at the B3LYP level were employed in order to understand the band structure find density of states For the CaMoO(4). UV-vis absorption measurements evidenced a variation in optical band gap values (from 3.42 to 3.72 cV) for the distinct morphologies. The blue and green PI. emissions observed in these crystals were ascribed to the intermediary energy levels arising from the distortions on the [MoO(4)] clusters clue to intrinsic defects in the lattice of anisotropic/isotropic crystals.

Random walks systems with killing on Z

We study random walks systems on Z whose general description follows. At time zero, there is a number N >= 1 of particles at each vertex of N, all being inactive, except for those placed at the vertex one. Each active particle performs a simple random walk on Z and, up to the time it dies, it activates all inactive particles that it meets along its way. An active particle dies at the instant it reaches a certain fixed total of jumps (L >= 1) without activating any particle, so that its lifetime depends strongly on the past of the process. We investigate how the probability of survival of the process depends on L and on the jumping probabilities of the active particles.

NONHOMOGENEOUS RANDOM WALKS SYSTEMS ON Z

We consider a random walks system on Z in which each active particle performs a nearest-neighbor random walk and activates all inactive particles it encounters. The movement of an active particle stops when it reaches a certain number of jumps without activating any particle. We prove that if the process relies on efficient particles (i.e. those particles with a small probability of jumping to the left) being placed strategically on Z, then it might survive, having active particles at any time with positive probability. On the other hand, we may construct a process that dies out eventually almost surely, even if it relies on efficient particles. That is, we discuss what happens if particles are initially placed very far away from each other or if their probability of jumping to the right tends to I but not fast enough.