Insights to urban dynamics through landscape spatial pattern analysis

Urbanisation is a dynamic complex phenomenon involving large scale changes in the land uses at local levels. Analyses of changes in land uses in urban environments provide a historical perspective of land use and give an opportunity to assess the spatial patterns, correlation, trends, rate and impacts of the change, which would help in better regional planning and good governance of the region. Main objective of this research is to quantify the urban dynamics using temporal remote sensing data with the help of well-established landscape metrics. Bangalore being one of the rapidly urbanising landscapes in India has been chosen for this investigation. Complex process of urban sprawl was modelled using spatio temporal analysis. Land use analyses show 584% growth in built-up area during the last four decades with the decline of vegetation by 66% and water bodies by 74%. Analyses of the temporal data reveals an increase in urban built up area of 342.83% (during 1973-1992), 129.56% (during 1992-1999), 106.7% (1999-2002), 114.51% (2002-2006) and 126.19% from 2006 to 2010. The Study area was divided into four zones and each zone is further divided into 17 concentric circles of 1 km incrementing radius to understand the patterns and extent of the urbanisation at local levels. The urban density gradient illustrates radial pattern of urbanisation for the period 1973-2010. Bangalore grew radially from 1973 to 2010 indicating that the urbanisation is intensifying from the central core and has reached the periphery of the Greater Bangalore. Shannon's entropy, alpha and beta population densities were computed to understand the level of urbanisation at local levels. Shannon's entropy values of recent time confirms dispersed haphazard urban growth in the city, particularly in the outskirts of the city. This also illustrates the extent of influence of drivers of urbanisation in various directions. Landscape metrics provided in depth knowledge about the sprawl. Principal component analysis helped in prioritizing the metrics for detailed analyses. The results clearly indicates that whole landscape is aggregating to a large patch in 2010 as compared to earlier years which was dominated by several small patches. The large scale conversion of small patches to large single patch can be seen from 2006 to 2010. In the year 2010 patches are maximally aggregated indicating that the city is becoming more compact and more urbanised in recent years. Bangalore was the most sought after destination for its climatic condition and the availability of various facilities (land availability, economy, political factors) compared to other cities. The growth into a single urban patch can be attributed to rapid urbanisation coupled with the industrialisation. Monitoring of growth through landscape metrics helps to maintain and manage the natural resources. (C) 2012 Elsevier B.V. All rights reserved.

Two phase microstructure for Ag-Ni nanowires

In the present study, electrodeposition technique was used to produce Ag-Ni nanowires. Ag-Ni system shows extremely high bulk immiscibility. Nanowire morphology was achieved by employing an anodic alumina membrane having pores of similar to 200 nm diameter. Microstructure of as-deposited wire was composed of nano-sized solid solution structured Ag-Ni nanoparticles embedded in a matrix of pure Ag phase. It is proposed that the two phase microstructure resulted from an initial formation of solid solution structured nanoparticles in the alumina template pore followed by nucleation of pure Ag phase over the particles which eventually grew to form the matrix phase. (C) 2013 Elsevier B. V. All rights reserved.

Catalytic Asymmetric Direct Vinylogous Michael Addition of gamma-Aryl-Substituted Deconjugated Butenolides to Nitroolefins and N-Phenylmaleimide

Direct asymmetric vinylogous Michael reactions of gamma-aryl-substituted deconjugated butenolides with nitroolefins and N-phenylmaleimide are described using bifunctional thiourea derivatives as the catalyst. The resulting butenolide derivatives containing adjacent quaternary and tertiary stereocenters are obtained in good yields (54-90%) and with excellent enantioselectivities (er up to 99:1) and high diastereoselectivities (dr up to > 20:1).

Microcracking and fracture process in cement mortar and concrete: a comparative study using acoustic emission technique

This article reports the acoustic emission (AE) study of precursory micro-cracking activity and fracture behaviour of quasi-brittle materials such as concrete and cement mortar. In the present study, notched three-point bend specimens (TPB) were tested under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/sec and the accompanying AE were recorded using a 8 channel AE monitoring system. The various AE statistical parameters including AE event rate , AE energy release rate , amplitude distribution for computing the AE based b-value, cumulative energy (I E) pound and ring down count (RDC) were used for the analysis. The results show that the micro-cracks initiated and grew at an early stage in mortar in the pre peak regime. While in the case of concrete, the micro-crack growth occurred during the peak load regime. However, both concrete and mortar showed three distinct stages of micro-cracking activity, namely initiation, stable growth and nucleation prior to the final failure. The AE statistical behavior of each individual stage is dependent on the number and size distribution of micro-cracks. The results obtained in the laboratory are useful to understand the various stages of micro-cracking activity during the fracture process in quasi-brittle materials such as concrete & mortar and extend them for field applications.

The knight of sugar industry: T. S. Venkatraman (1884-1963)

Tiruvadi Sambasiva Venkatraman (TSV) was a plant breeder. In response to a call from Pundit Madan Mohan Malaviya, he made it his mission to develop high-yielding varieties of sugarcane for manufacturing sugar and making it available as a sweetening agent and an energy source for the malnourished children of India. Using Saccharum officinarum, then under cultivation in India, as the female parent, he artificially fertilized it with pollen from S. barberi, which grew wild in Coimbatore. After 4-5 recurrent backcrossings of S. officinarum Chi wild Sorghum spontaneum with S. officinarum as the female parent, TSV selected the `rare' interspecies hybrid cane varieties that resembled sugarcane and had approximately 2.5 cm thick juicy stems containing 16-18% sucrose - nearly 35 times more than what occurred in parent stocks. The hybrid canes matured quickly, were resistant to waterlogging, drought, and to the red-rot disease caused by Glomerella tucumanensis (Sordariomycetes: Glomerellaceae), and to the sereh-virus disease. Most importantly, they were amenable for propagation using stem cuttings. In recognition of the development of high-yielding sugarcane varieties, TSV was conferred the titles Rao Bahadur, Rao Sahib, and Sir by the British Government, and Padma Bhushan by the Republic of India. In the next few decades, consequent to TSV's work, India turned into the second largest sugar producer in the world, after Brazil. The hybrid sugarcane varieties developed are the foundational stocks for new sugarcane x bamboo hybrids, and for possible resistance to Puccinia megalocephala (Pucciniomycetes: Pucciniaceae) and Ustilago scitaminea (Ustilaginomycetes: Ustilaginaceae) using molecular techniques.

Lantana camara L. (Verbenaceae) invasion along streams in a heterogeneous landscape

Streams are periodically disturbed due to flooding, act as edges between habitats and also facilitate the dispersal of propagules, thus being potentially more vulnerable to invasions than adjoining regions. We used a landscape-wide transect-based sampling strategy and a mixed effects modelling approach to understand the effects of distance from stream, a rainfall gradient, light availability and fire history on the distribution of the invasive shrub Lantana camara L.(lantana) in the tropical dry forests of Mudumalai in southern India. The area occupied by lantana thickets and lantana stem abundance were both found to be highest closest to streams across this landscape with a rainfall gradient. There was no advantage in terms of increased abundance or area occupied by lantana when it grew closer to streams in drier areas as compared to moister areas. On an average, the area covered by lantana increased with increasing annual rainfall. Areas that experienced greater number of fires during 1989-2010 had lower lantana stem abundance irrespective of distance from streams. In this landscape, total light availability did not affect lantana abundance. Understanding the spatially variable environmental factors in a heterogeneous landscape influencing the distribution of lantana would aid in making informed management decisions at this scale.

Electron microscopy of Ag-(Ni-O) core-shell nanowires

This report provides information about an electrodeposition based two-step synthesis methodology for producing core-shell Ag-(Ni-O) nanowires and their detailed structural and compositional characterization using electron microscopy technique. Nanowires were produced by employing anodic alumina templates with a pore diameter of 200 nm. In the first step of the synthesis process, nanocrystalline Ni-O was electrodeposited in a controlled manner such that it heterogeneously nucleated and grew only on the template pore walls without filling the pores from bottom upwards. This alumina template with pore walls coated with Ni-O was then utilized as a template during the electrodeposition of Ag in the second step. Electrodeposited Ag filled the template pores to finally produce Ag-(Ni-O) core-shell nanowires with an overall diameter of 200 nm.

Medieval pulse of great earthquakes in the central Himalaya: Viewing past activities on the frontal thrust

The Himalaya has experienced three great earthquakes during the last century1934 Nepal-Bihar, 1950 Upper Assam, and arguably the 1905 Kangra. Focus here is on the central Himalayan segment between the 1905 and the 1934 ruptures, where previous studies have identified a great earthquake between thirteenth and sixteenth centuries. Historical data suggest damaging earthquakes in A.D. 1255, 1344, 1505, 1803, and 1833, although their sources and magnitudes remain debated. We present new evidence for a great earthquake from a trench across the base of a 13m high scarp near Ramnagar at the Himalayan Frontal Thrust. The section exposed four south verging fault strands and a backthrust offsetting a broad spectrum of lithounits, including colluvial deposits. Age data suggest that the last great earthquake in the central Himalaya most likely occurred between A.D. 1259 and 1433. While evidence for this rupture is unmistakable, the stratigraphic clues imply an earlier event, which can most tentatively be placed between A.D. 1050 and 1250. The postulated existence of this earlier event, however, requires further validation. If the two-earthquake scenario is realistic, then the successive ruptures may have occurred in close intervals and were sourced on adjacent segments that overlapped at the trench site. Rupture(s) identified in the trench closely correlate with two damaging earthquakes of 1255 and 1344 reported from Nepal. The present study suggests that the frontal thrust in central Himalaya may have remained seismically inactive during the last similar to 700years. Considering this long elapsed time, a great earthquake may be due in the region.

A Study of Pressure-Dependent Squeeze Film Stiffness as a Resonance Modulator Using Static and Dynamic Measurements

We report on the resonant frequency modulation of inertial microelectromechanical systems (MEMS) structures due to squeeze film stiffness over a range of working pressures. Squeeze film effects have been studied extensively, but mostly in the context of damping and Q-factor determination of dynamic MEMS structures, typically suspended over a fixed substrate with a very thin air gap. Here, we show with experimental measurements and analytical calculations how the pressure-dependent air springs (squeeze film stiffness) change the resonant frequency of an inertial MEMS structure by as much as five times. For capturing the isolated effect of the squeeze film stiffness, we first determine the static stiffness of our structure with atomic force microscope probing and then study the effect of the air spring by measuring the dynamic response of the structure, thus finding the resonant frequencies while varying the air pressure from 1 to 905 mbar. We also verify our results by analytical and Finite Element Method calculations. Our findings show that the pressure-dependent squeeze film stiffness can affect a rather huge range of frequency modulation (>400%) and, therefore, can be used as a design parameter for exploiting this effect in MEMS devices. 2014-0310]

Influence of grain boundary on melting

The temperature behaviour of an Al bicrystal with surfaces consisting of (110) and (111) crystals is simulated using molecular dynamics. The result shows that the (110) crystal losses its crystalline order at 820K, whereas the disorder does not propagate through the (111) crystal at this temperature. Instead, some disordered atoms are recrystallized into the (111) crystal and the initial grain boundary changes into a stable order-disorder interface. Thus, it was discovered that at a temperature near its melting point, the (111) crystal grew and obstructed the propagation of disorder. Such an obstruction is helpful for understanding melting.

Criterios de manejo genético en un hato criollo reyna en el trópico seco de Nicaragua

Con el propósito de establecer criterios de manejo genético del hato Criollo Reyna, con miras a su conservación y utilización potencial en sistemas de doble propósito, en Nicaragua, se caracterizó y estimó parámetros genéticos que permiten establecer política de desecho y reemplazo en el hato bajo estudio. Primeramente se determinó el efecto de diferentes factores ambientales (año de parto, época de parto, número de parto, raza de la vaca, las interacciones raza de la vaca por año de parto, raza de la vaca por época de parto, número de parto por época de parto, año de parto por la época de parto) sobre el comportamiento productivo y reproductivo de hato criollo lechero Reyna bajo condiciones del trópico seco en la finca "San José" Masatepe, Nicaragua. Además se cuantificó repetibilidad para PLIEP y se clasificó las vacas en base a la Habilidad Probable de Producción. Se analizaron 756 registros productivos y reproductivos correspondientes al período l982 a l993. Las características estudiadas fueron producción de leche total (PLTOT) producción de leche por día de intervalo entre partos (PLIEP); largo de lactancia (LARLA); producción de leche 305 días (PL305); intervalo entre partos (IEP). En los análisis se utilizó los procedimientos de mínimos cuadrados. Mediante análisis de varianza se evaluó el efecto del año de parto, época de .parto, número de parto, raza de la vaca y posibles interacciones sobre las características PLTOT, PLIEP, LARLA PL305 e IEP. Este análisis mostró importancia (P<0.01) del año de parto sobre todas las características estudiadas exceptuando PLIEP (P<0.05). El número de parto resultó significativo (P<0.05) para LARLA. La interacción NUMPA x EP es altamente significativa (P<0.01) para todas las variables excepto PLIEP para la cual carece de significancia. En este trabajo también se pudo constatar que la interacción año de parto por época de parto es altamente significativa (P<0.01) para el intervalo entre partos. Las medias de mínimos cuadrados obtenidas en éste estudio fueron de 1673.29±622.228 Kg., 4.533 ±1.84 Kg.,261.42±58.79 días, 1641.10±601.7 Kg., 392.06±63,5 para PLTOT, PLIEP, LARLA, PL305, IEP respectivamente. El valor de repetibilidad calculado para la característica PLIEP fue de O. 27±0.102, el cual muestra la existencia de variabilidad genética para dicha característica, que sumado a los niveles productivos y reproductivos de la Raza en estudio, son biológicamente aceptables y justifican su conservación con miras a su utilización potencial en los sistemas de producción bovina de bajo nivel tecnológico en el trópico seco de Nicaragua.

炸药装药的发射起爆概率与质量限定条件初探

讨论火炮发射时炮弹炸药装药的发射起爆概率、寻找制订炮弹炸药装药质量限定条件的方法。

细粒尾矿动力特性的试验研究

通过室内动三轴试验,测试了有色金属铜矿的细粒尾矿动力特性,获得了细粒尾矿在动荷载作用下的动应力与动应变、动应变与动模量及动阻尼比、动孔隙水压与动应力等相关关系,得出动孔隙水压对细粒尾矿动强度的影响有限等结论,对研究细粒尾矿的动力特性作了一些探索.

Comportamiento de plantas micropropagadas del clon de banano "Enano ecuatoriano" (Musa spp), en condiciones del regen, primer ciclo

Con el objetivo de evaluar el comportamiento en el campo de plantas micro propagadas del clon de banano "Enano Ecuatoriano" se estableció un ensayo comparativo, en Bloque Completamente al Azar, con plantas del mismo clon propagadas de manera convencional (cormo). El estudio se llevó a cabo en áreas del Programa de Recursos Genéticos Nicaragüenses (REGEN) en el periodo comprendido entre marzo 1990 y marzo 1991; en el primer ciclo vegetativo del cultivo. Se evaluó el comportamiento morfológico, productivo y la fenología de las plantas durante el ensayo. No se encontró diferencia entre las vitro-plantas y las plantas cormo en cuanto a Número de hijos, Altura de planta y Área foliar, al momento del inicio de la floración, no obstante las plantas micro propagadas fueron significativamente superiores que las plantas convencionales en cuanto al Número de hojas y Diámetro del pseudotallo. El Rendimiento de las plantas in vitro fue significativamente mayor que las plantas cormo; aunque en la fecha de inicio y duración de la floración lo mismo que en el momento de cosecha no hubo diferencia entre ellos.

Efecto de diferentes frijoles abonos sobre la dinámica de macronutrientes (N,P,K) del suelo, el aporte de materia orgánica, la incidencia de las diferentes pestes agrícolas y sobre el crecimiento y rendimiento de la pitahaya (Hylocereus undatus Britton y Rose)

Durante la época de postrera en 1997 se estableció un experimento de campo en la finca Frutas Tropicales y Cia Ltda, ubicada en el km 38 carretera MasayaTipitapa, Nicaragua para evaluar el efecto de diferentes frijoles abonos sobre la dinámica de macronutrientes del suelo, aporte de materia orgánica y la incidencia de las diferentes pestes agrícolas sobre el crecimiento y rendimiento de la pitahaya (Hylocereus undatus, Britton & Rose). El diseño experimental utilizado fue un bloque completo al azar con tres repeticiones. Los tratamientos evaluados fueron: Mucuna pruriens (L), Cajanus cajan (L), Canavalia ensiformis (L), Vigna unguiculata (L), Dolichos lablab (L) y el tratamiento sin frijol. Los fríjoles abonos ejercen un efecto positivo en el aporte de nutriente y reciclaje de los mismos mejoran la fertilidad del suelo. También aportan gran cantidad de materia orgánica a partir de los restos vegetales produciendo mayor biomasa C. ensiformis, C. cajan y M pruriens. Las malas hierbas fueron controladas eficazmente por los frijoles abonos, principalmente las monocotiledóneas; no así en el tratamiento sin frijol. Las malas hierbas que más predominaron fueron: Acalypha alopecuroides (L), Hybanthus attenuatus (H&B), Chamaesyce hirta (L), Rícharcdia scabra (L), Hyparrhenia rufa (Nees), Digitaria sanguinalis (L), Panicum decumbens (L), Panicum reptans (L) y Cynodon nlejluensis (Vanderyst). Las poblaciones de insectos plagas fueron menores en los tratamientos que predominaba el clon más resistente al ataque de insectos plagas. Los insectos plagas de suelo fueron controlados por los frijoles abonos, al igual que los nematodos. La incidencia de las enfermedades Colletotrichum goesporiodes Penz (Antracnosis) y Dotiorella sp (Ojo de Pescado) fue menor en los tratamientos donde predominaba el clon Cebra. La Erwinia carotovora Iones (Bacteriosis) presentó menor incidencia bajo el efecto de D. lablab y C. ensiformis. El efecto positivo del asocio de estos fríjoles abonos con la pitahaya mejora su crecimiento produciendo más brotes bajo la presencia de C. cajan, se obtuvieron incremento en los rendimientos tanto en el número de fiutos por hectárea como en el rendimiento en kg/ha bajo el efecto de C. cajan, M pruriens y D. lablab