Los dilemas del desarrollo sostenible: conectando los grandes proyectos de minería de oro en Brasil y Colombia con la protección del ambiente y los derechos humanos

Esta tesis doctoral presenta los resultados de la investigación realizada por la autora sobre desarrollo sostenible, grandes proyectos de minería de oro y derechos humanos en países en desarrollo como Brasil y Colombia. En este trabajo doctoral fueron seleccionados dos grandes proyectos de minería aurífera, uno en Brasil y el otro en Colombia, ambos ejecutados por la misma empresa minera en contextos geográficos y condiciones ambientales similares. El objetivo fue realizar un estudio comparativo de las diferentes legislaciones ambientales y mineras, las instituciones, las políticas nacionales y la protección de los derechos humanos de las comunidades impactadas por los proyectos mineros en cada país. La metodología utilizada para esta investigación doctoral, en primer lugar, consistió en la revisión de fuentes primarias y secundarias, a través de la literatura disponible en español, portugués e inglés sobre los grandes ejes temáticos del estudio. En segundo lugar, se utilizó la metodología de derecho comparado para el análisis de las legislaciones de Brasil y Colombia y finalmente, se realizaron visitas de campo a cada uno de los proyectos seleccionados y se trabajó con autoridades ambientales nacionales. Algunas conclusiones de la investigación señalaron que para garantizar la efectividad del derecho ambiental, el desarrollo sostenible y los derechos humanos en grandes proyectos mineros se requiere: •Fortalecer las legislaciones y las instituciones mineras y ambientales y en particular el proceso de licenciamiento ambiental. •Fortalecer la capacidad del Ministerio Público y de los jueces involucrados que deciden casos ambientales. •Reconocer el rol fundamental de los derechos procedimentales ambientales para resolver conflictos socioambientales, esto es, el empoderamiento de las comunidades con información de calidad y mecanismos de participación y justicia ambiental efectiva para la adecuada protección de derechos colectivos. •Incorporar el enfoque de derechos humanos en la gestión ambiental.

Natural resource windfalls and efficiency of local government expenditures: evidence from Peru

We study the role of natural resource windfalls in explaining the efficiency of public expenditures. Using a rich dataset of expenditures and public good provision for 1,836 municipalities in Peru for period 2001-2010, we estimate a non-monotonic relationship between the efficiency of public good provision and the level of natural resource transfers. Local governments that were extremely favored by the boom of mineral prices were more efficient in using fiscal windfalls whereas those benefited with modest transfers were more inefficient. These results can be explained by the increase in political competition associated with the boom. However, the fact that increases in efficiency were related to reductions in public good provision casts doubts about the beneficial effects of political competition in promoting efficiency.

Strained relations: a critical analysis of the mining conflict in Prestea, Ghana

This paper examines the dynamics of the ongoing conflict in Prestea, Ghana, where indigenous galamsey mining groups are operating illegally on a concession awarded to Bogoso Gold Limited (BGL), property of the Canadian-listed multinational Gold Star Resources. Despite being issued firm orders by the authorities to abandon their activities, galamsey leaders maintain that they are working areas of the concession that are of little interest to the company; they further counter that there are few alternative sources of local employment, which is why they are mining in the first place. Whilst the Ghanaian Government is in the process of setting aside plots to relocate illegal mining parties and is developing alternative livelihood projects, efforts are far from encouraging: in addition to a series of overlooked logistical problems, the areas earmarked for relocation have not yet been prospected to ascertain gold content, and the alternative income-earning activities identified are inappropriate. As has been the case throughout mineral-rich sub-Saharan Africa, the conflict in Prestea has come about largely because the national mining sector reform program, which prioritizes the expansion of predominantly foreign-controlled large-scale projects, has neglected the concerns of indigenous subsistence groups.

Low temperature CO oxidation on supported and unsupported gold compounds

Several simple gold compounds and their physical mixtures with TiO2 Were tested for low temperature CO oxidation. No true catalytic activity was found for gold precursors on their own, although both Au2O3 and Au(OH)(3) react well with CO even at room temperature in a non-catalytic manner. Despite that catalytic activity was obtained by physically mixing Au(OH)(3) or Au2O3 with TiO2 and the results further emphasise the importance of a good contact between the gold and the support for good CO oxidation activity. (c) 2005 Published by Elsevier.

Improving aircraft maintenance, repair, and overhaul: A novel text mining approach

Aircraft Maintenance, Repair and Overhaul (MRO) feedback commonly includes an engineer’s complex text-based inspection report. Capturing and normalizing the content of these textual descriptions is vital to cost and quality benchmarking, and provides information to facilitate continuous improvement of MRO process and analytics. As data analysis and mining tools requires highly normalized data, raw textual data is inadequate. This paper offers a textual-mining solution to efficiently analyse bulk textual feedback data. Despite replacement of the same parts and/or sub-parts, the actual service cost for the same repair is often distinctly different from similar previously jobs. Regular expression algorithms were incorporated with an aircraft MRO glossary dictionary in order to help provide additional information concerning the reason for cost variation. Professional terms and conventions were included within the dictionary to avoid ambiguity and improve the outcome of the result. Testing results show that most descriptive inspection reports can be appropriately interpreted, allowing extraction of highly normalized data. This additional normalized data strongly supports data analysis and data mining, whilst also increasing the accuracy of future quotation costing. This solution has been effectively used by a large aircraft MRO agency with positive results.

‘Cursed’ communities? Corporate Social Responsibility (CSR), company towns and the mining industry in Namibia

This article examines Corporate Social Responsibility (CSR) and mining community development, sustainability and viability. These issues are considered focussing on current and former company-owned mining towns in Namibia. Historically company towns have been a feature of mining activity in Namibia. However, the fate of such towns upon mine closure has been and remains controversial. Declining former mining communities and even ghost mining towns can be found across the country. This article draws upon research undertaken in Namibia and considers these issues with reference to three case study communities. This article examines the complexities which surround decision-making about these communities, and the challenges faced in efforts to encourage their sustainability after mining. In this article, mine company engagements through CSR with the development, sustainability and viability of such communities are also critically discussed. The role, responsibilities, and actions of the state in relation to these communities are furthermore reflected upon. Finally, ways forward for these communities are considered.

Tree population and community dynamics in a Brazilian tropical semideciduous forest

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Airborne-Particle Abrasion and Mechanico-Thermal Cycling on the Flexural Strength of Glass Ceramic Fused to Gold or Cobalt-Chromium Alloy

Purpose: To evaluate the effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of a ceramic fused to cobalt-chromium alloy or gold alloy.Materials and Methods: Metallic bars (n = 120) were made (25 mm x 3 mm x 0.5 mm): 60 with gold alloy and 60 with Co-Cr. At the central area of the bars (8 mm x 3 mm), a layer of opaque ceramic and then two layers of glass ceramic (Vita VM13, Vita Zahnfabrick) were fired onto it (thickness: 1 mm). Ten specimens from each alloy group were randomly allocated to a surface treatment [(tungsten bur or air-particle abrasion (APA) with Al(2)O(3) at 10 mm or 20 mm away)] and mechanico-thermal cycling (no cycling or mechanically loaded 20,000 cycles; 10 N distilled water at 37 degrees C and then thermocycled 3000 cycles; 5 degrees C to 55 degrees C, dwell time 30 seconds) combination. Those specimens that did not undergo mechanico-thermal cyclingwere stored inwater (37 degrees C) for 24 hours. Bond strength was measured using a three-point bend test, according to ISO 9693. After the flexural strength test, failure types were noted. The data were analyzed using three factor-ANOVA and Tukey's test (alpha = 0.05).Results: There were no significant differences between the flexural bond strength of gold and Co-Cr groups (42.64 +/- 8.25 and 43.39 +/- 10.89 MPa, respectively). APA 10 and 20 mm away surface treatment (45.86 +/- 9.31 and 46.38 +/- 8.89 MPa, respectively) had similar mean flexural strength values, and both had significantly higher bond strength than tungsten bur treatment (36.81 +/- 7.60 MPa). Mechanico-thermal cycling decreased the mean flexural strength values significantly for all six alloy-surface treatment combinations tested when compared to the control groups. The failure type was adhesive in the metal/ceramic interface for specimens surface treated only with the tungsten bur, and mixed for specimens surface treated with APA 10 and 20 mm.Conclusions: Considering the levels adopted in this study, the alloy did not affect the bond strength; APA with Al(2)O(3) at 10 and 20 mm improved the flexural bond strength between ceramics and alloys used, and the mechanico-thermal cycling of metal-ceramic specimens resulted in a decrease of bond strength.

BODE Index and GOLD Staging as Predictors of 1-Year Exacerbation Risk in Chronic Obstructive Pulmonary Disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transforming open mining pits into fish farms: Moving towards sustainability

The legacy of mining activities has typically been land 'returned to wildlife', or, at some sites, degraded to such an extent that it is unsuitable for any alternate use. Progress towards sustainability is made when value is added in terms of the ecological, social and economic well-being of the community. In keeping with the principles of sustainable development, the innovative use of flooded open pits and tailings impoundments as commercial, recreational or ornamental fish farms should be considered in some locations, as it could make a significant contribution to the social equity, economic vitality and environmental integrity of mining communities. This article highlights the growing significance of aquaculture and explores the benefits and barriers to transforming flooded pits and impoundments into aquaculture operations. Among other benefits, aquaculture may provide a much-needed source of revenue, employment and, in some cases, food to communities impacted by mine closure. Further, aquaculture in a controlled closed environment may be more acceptable to critics of fish farming who are concerned about fish escapes and viral transmissions to wild populations. Despite the potential benefits, aquaculture in flooded pits and impoundments is not without its complications - it requires a site-specific design approach that must consider issues ranging from metals uptake by fish, to the long-term viability of the aquatic system as fish habitat, to the overall contribution of aquaculture to sustainability. © 2004 United Nations. Published by Blackwell Publishing.

Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks

Objectives: The aim of this study was to evaluate the effect of thermal and mechanical cycling alone or in combination, on the flexural strength of ceramic and metallic frameworks cast in gold alloy or titanium. Methods: Metallic frameworks (25 mm × 3 mm × 0.5 mm) (N = 96) cast in gold alloy or commercial pure titanium (Ti cp) were obtained using acrylic templates. They were airborne particle-abraded with 150 μm aluminum oxide at the central area of the frameworks (8 mm × 3 mm). Bonding agent and opaque were applied on the particle-abraded surfaces and the corresponding ceramic for each metal was fired onto them. The thickness of the ceramic layer was standardized by positioning the frameworks in a metallic template (height: 1 mm). The specimens from each ceramic-metal combination (N = 96, n = 12 per group) were randomly assigned into four experimental fatigue conditions, namely water storage at 37 °C for 24 h (control group), thermal cycling (3000 cycles, between 4 and 55 °C, dwell time: 10 s), mechanical cycling (20,000 cycles under 10 N load, immersion in distilled water at 37 °C) and, thermal and mechanical cycling. A flexural strength test was performed in a universal testing machine (crosshead speed: 1.5 mm/min). Data were statistically analyzed using two-way ANOVA and Tukey's test (α = 0.05). Results: The mean flexural strength values for the ceramic-gold alloy combination (55 ± 7.2 MPa) were significantly higher than those of the ceramic-Ti cp combination (32 ± 6.7 MPa) regardless of the fatigue conditions performed (p < 0.05). Mechanical and thermo-mechanical fatigue decreased the flexural strength results significantly for both ceramic-gold alloy (52 ± 6.6 and 53 ± 5.6 MPa, respectively) and ceramic-Ti cp combinations (29 ± 6.8 and 29 ± 6.8 MPa, respectively) compared to the control group (58 ± 7.8 and 39 ± 5.1 MPa, for gold and Ti cp, respectively) (p < 0.05) (Tukey's test). While ceramic-Ti cp combinations failed adhesively at the metal-opaque interface, gold alloy frameworks exhibited a residue of ceramic material on the surface in all experimental groups. Significance: Mechanical and thermo-mechanical fatigue conditions decreased the flexural strength values for both ceramic-gold alloy and ceramic-Ti cp combinations with the results being significantly lower for the latter in all experimental conditions. © 2007 Academy of Dental Materials.

Minas do Cuiabá, ilha dos sertões: considerações sobre o papel da metrópole na expansão dos domínios portugueses na América (1721-1728)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Tocantinzinho gold deposit, Tapajós province, state of Pará: host granite, hydrothermal alteration and mineral chemistry

Este trabalho apresenta dados geológicos, petrográficos e mineralógicos referentes ao granito que hospeda o depósito aurífero Tocantinzinho e objetivou contribuir ao entendimento dos processos hidrotermais associados à sua gênese. O depósito ocorre em biotita monzogranito tardi a pós-tectônico, do subtipo oxidado da série ilmenita, que foi alojado a profundidades de 6 - 9 km. Esse granitoide encontra-se bastante fraturado e localmente brechado, tendo experimentado processos hidrotermais de grau fraco a moderado, os quais geraram duas principais variedades (salame e smoky) sem diferenças mineralógicas ou químicas importantes, porém macroscopicamente muito distintas. Vários tipos de alteração hidrotermal foram reconhecidos nas rochas granitoides, sendo representados principalmente por vênulas e pela substituição de minerais primários. A história hidrotermal teve início com a microclinização, durante a qual o protólito granítico foi em parte transformado na variedade salame. A temperaturas em torno de 330 oC ocorreu a cloritização, que produziu chamosita com X_Fe na faixa de 0,55 - 0,70. Seguiu-se a sericitização, durante a qual os fluidos mineralizadores precipitaram pirita, calcopirita, esfalerita, galena e ouro. À medida que a alteração progrediu, as soluções se saturaram em sílica e precipitaram quartzo em vênulas. No estágio mais tardio (carbonatação), provavelmente houve mistura entre fluidos aquosos e aquocarbônicos, de que teria resultado a reação entre Ca²⁺ e CO₂ e formação de calcita. A maioria dos sulfetos encontra-se em vênulas, algumas em trama stockwork. O ouro é normalmente muito fino e ocorre principalmente como inclusões submicroscópicas ou ao longo de microfraturas em pirita e quartzo. O depósito Tocantinzinho é muito similar aos depósitos Batalha, Palito e São Jorge, e aos do campo Cuiú-Cuiú. Tipologicamente poderia ser classificado como depósito relacionado a intrusões.

Orange pectin mediated growth and stability of aqueous gold and silver nanocolloids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of corrosion resistance and cytotoxicity of electrodeposited gold on various types of intermediate layers

Gold plated surfaces are widely applied in several technical and decorative fields. The two main issues regarding the discussion on the field of precious metal coatings concern the increase in the use of thinner gold layers and 'Ni free' substrates. In order to ensure the quality of the final products, the effects of the plated surfaces on their performance require thorough and accurate research. In this paper, the corrosion resistance of gold plated nickel, copper and bronze was investigated by electrochemical methods specifically potentiodynamic polarisation and electrochemical impedance spectroscopy in phosphate buffered saline. The cytotoxicity of the gold plated substrates was also evaluated and compared. The results showed that the substrate related to the best corrosion resistance and cytotoxicity among the tested ones was bronze, and the one with the lowest performance was nickel.