Suitability of containers from different sources as breeding sites of Aedes aegypti (L.) in a cemetery of Buenos Aires City, Argentina

Cemeteries are ideal urban areas to study the importance of different types of containers as breeding sites of Aedes aegypti (L.). In the present study, the suitability of plastic, glass, ceramic and metal containers was evaluated in four patches within a cemetery of Buenos Aires City, Argentina. Between October 1998 and May 2000, we found 215 breeding sites of Ae. aegypti out of 13,022 water-filled containers examined. In two patches containing microenvironments sheltered from the sun, the use of the different types of containers was proportional to the offer (correlation coefficient = 0.99, P < 0.05 in both cases). In the remaining patches, plastic and metal containers were the most and less frequent breeding sites, respectively (P < 0.001 in both cases). The number of immatures per breeding site (median = 4.5) did not show significant differences among the four types of containers examined (H3, 215 = 1.216, P = 0.749). Differences found in patches from a same cemetery suggest that different microenvironmental conditions affect the suitability of each type of container for Ae. aegypti breeding. Plastic containers appeared as key breeding sites that should be removed to reduce the Ae. aegypti population in the study area.

Detection of telomerase activity in Plasmodium falciparum using a nonradioactive method

A simple, quick and sensitive method was used to detect telomerase activity in Plasmodium falciparum. The telomeric repeat amplification protocol (TRAP assay) was modified using electrophoresis and staining with SYBR-green I to detect telomerase activity in a range of 10² to 10(7) parasites. This might be a useful way to ascertain telomerase activity in different types of nontumor cells.

Use of quantum dots in aqueous solution to detect blood fingermarks on non-porous surfaces.

A new and original reagent based on the use of highly fluorescent cadmium telluride (CdTe) quantum dots (QDs) in aqueous solution is proposed to detect weak fingermarks in blood on non-porous surfaces. To assess the efficiency of this approach, comparisons were performed with one of the most efficient blood reagents on non-porous surfaces, Acid Yellow 7 (AY7). To this end, four non-porous surfaces were studied, i.e. glass, transparent polypropylene, black polyethylene, and aluminium foil. To evaluate the sensitivity of both reagents, sets of depleted fingermarks were prepared, using the same finger, initially soaked with blood, which was then successively applied on the same surface without recharging it with blood or latent secretions. The successive marks were then cut in halves and the halves treated separately with each reagent. The results showed that QDs were equally efficient to AY7 on glass, polyethylene and polypropylene surfaces, and were superior to AY7 on aluminium. The use of QDs in new, sensitive and highly efficient latent and blood mark detection techniques appears highly promising. Health and safety issues related to the use of cadmium are also discussed. It is suggested that applying QDs in aqueous solution (and not as a dry dusting powder) considerably lowers the toxicity risks.

Use of a saline gradient for the diagnosis of schistosomiasis

The development of novel methods for parasitological diagnosis that are both highly sensitive and low in cost has been strongly recommended by the World Health Organization. In this study, a new technique for diagnosis of schistosomiasis mansoni is proposed based on the differential sedimentation of eggs when subjected to a slow continuous flux of 3% saline solution through a porous plaque. This influx suspends low-density faecal material, effectively cleaning the sample. The remaining sediment covering the porous plaque surface is then transferred to a glass slide and examined under a bright field microscope. Twelve Kato-Katz slides were used for comparison in the present study. Our results suggest that the saline gradient method detects a signifi-cantly higher number of eggs than the 12 Kato-Katz slides (p < 0.0001). We also found microscopic inspection to be quicker and easier with our newly described method. After cleaning the sample, the obtained sediment can also be conserved in a 10% formaldehyde solution and examined for at least 45 days later without statistically significant egg count differences.

Cuestiones de pintura y miniatura en Cerdeña: modelos, intercambios y relaciones internacionales en la segunda mitad del siglo XV

Durante el siglo XV Cerdeña desempeña, gracias a su posicionamiento geográfico en el centro del Mediterráneo, un papel muy importante en la red de comercio internacional. Este movimiento económico-cultural fomenta una extensa producción artística que está caracterizada por depender fuertemente de la presencia en la isla de talleres y artistas catalanes. Al día de hoy se conoce muy poco la presencia y las características de la pintura del gótico tardío en la Cerdeña. Las dificultades encontradas por los investigadores en la reconstrucción de la historia del arte sarda de esta época son numerosas y difíciles de solucionar. El problema depende de la falta de fuentes documentales (directas e indirectas), de la gran dispersión de muchísimas obras, de la inaccesibilidad de unas de las obras más interesantes; del desplazamiento casi total de las obras de su sitio original, y del total anonimato de la mayoría de los artistas. En estas condiciones la única solución para alcanzar nuevos elementos científicos es: integrar los conocimientos procedente de las fuentes documentales; ampliar la practica metodológica (multidisciplinariedad), conectar el tejido sardo (pintura, miniatura, grabados) con el ámbito internacional. El objetivo final es introducir la pintura sarda en un contexto más amplio, para poder descubrir el sistema de modelos y de relaciones artísticas, que la conectan con el mundo artístico mediterráneo. El trabajo de este primer año ha sido particularmente intenso y complicado por las dificultades encontradas en ponerse en un tema tan vasto como lo de la pintura y los modelos figurativos de la segunda mitad del siglo XV. Principales objetivos: averiguar toda la bibliografía conocida sobre el tema e intentar ampliar los estudios cada vez que se encontraban indicios sobre posibles autores y obras sardas; empezar el trabajo de catalogación de las obras pictóricas (conocidas o recien descubiertas.)

Hypersensitivity pneumonitis secondary to lovebirds: a new cause of bird fancier's disease.

Hypersensitivity pneumonitis (HP) is an immunologically mediated lung disease due to the repetitive inhalation of antigens. Most new cases arise from residential exposures, notably to birds, and are thus more difficult to recognise. The present authors report a 59-yr-old male who complained of dyspnoea and cough while being treated with amiodarone. Pulmonary function tests revealed restriction and obstruction with low diffusing lung capacity for carbon monoxide and partial pressure of oxygen. A high-resolution computed tomography chest scan and bronchoalveolar lavage showed diffuse bilateral ground-glass attenuation and lymphocytic alveolitis, respectively. Initial diagnosis was amiodarone pulmonary toxicity, but because of a rapidly favourable evolution, this diagnosis was questioned. A careful environmental history revealed a close contact with lovebirds shortly before the onset of symptoms. Precipitins were strongly positive against lovebird droppings, but were negative against other avian antigens. The patient was diagnosed with hypersensitivity pneumonitis to lovebirds. Avoidance of lovebirds and steroid treatment led to rapid improvement. The present observation identifies a new causative agent for hypersensitivity pneumonitis and highlights the importance of a thorough environmental history and of searching for precipitins against antigens directly extracted from the patient's environment. These two procedures should allow a more precise classification of some cases of pneumonitis, and thus might avoid progression of active undiagnosed hypersensitivity pneumonitis to irreversible fibrosis or emphysema.

Do we truly see what we think we see? The role of cognitive bias in pathological interpretation.

In the histomorphological grading of prostate carcinoma, pathologists have regularly assigned comparable scores for the architectural Gleason and the now-obsolete nuclear World Health Organization (WHO) grading systems. Although both systems demonstrate good correspondence between grade and survival, they are based on fundamentally different biological criteria. We tested the hypothesis that this apparent concurrence between the two grading systems originates from an interpretation bias in the minds of diagnostic pathologists, rather than reflecting a biological reality. Three pathologists graded 178 prostatectomy specimens, assigning Gleason and WHO scores on glass slides and on digital images of nuclei isolated out of their architectural context. The results were analysed with respect to interdependencies among the grading systems, to tumour recurrence (PSA relapse > 0.1 ng/ml at 48 months) and robust nuclear morphometry, as assessed by computer-assisted image analysis. WHO and Gleason grades were strongly correlated (r = 0.82) and demonstrated identical prognostic power. However, WHO grades correlated poorly with nuclear morphology (r = 0.19). Grading of nuclei isolated out of their architectural context significantly improved accuracy for nuclear morphology (r = 0.55), but the prognostic power was virtually lost. In conclusion, the architectural organization of a tumour, which the pathologist cannot avoid noticing during initial slide viewing at low magnification, unwittingly influences the subsequent nuclear grade assignment. In our study, the prognostic power of the WHO grading system was dependent on visual assessment of tumour growth pattern. We demonstrate for the first time the influence a cognitive bias can have in the generation of an error in diagnostic pathology and highlight a considerable problem in histopathological tumour grading.

Síntesi i propietats de vidres metàl•lics massissos i materials nanocomposites basats en Fe per aplicacions com a materials magnètics tous

Estudi realitzat a partir d’una estada a l’ Institut für Komplexe Materialien, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden, entre 2010 i 2011. S'ha explorat l'efecte de les condicions i influència dels elements d'aleació en la capacitat de formació de vidre, l'estructura i les propietats tèrmiques i magnètiques de vidres metàl•lics massissos i materials nanocristal•lins en base Fe. La producció d'aquests materials en forma de cintes de unes 20 micres de gruix ha estat àmpliament estudiada i s'ha vist que presenten unes propietats excel•lents com a materials magnètics tous. El propòsit general d'aquest projecte era l'obtenció de composicions òptimes amb alta capacitat de formar vidre i amb excel•lents propietats magnètiques com a materials magnètics tous combinat amb bones propietats mecàniques. El projecte prenia com a punt de partida l'aliatge [FeCoBSi]96Nb4 ja que és el que presenta millor capacitat de formar vidre i presenta una alta imantació de saturació i baix camp coercitiu. S'ha fet un estudi dels factors fonamentals que intervenen en la formació de l'estat vitri. La composició abans esmentada ha estat variada amb l'addició d'altres elements per estudiar com afecten aquests nous elements a les propietats, la formació de vidre i l'estructura dels aliatges resultants amb l'objectiu de millorar-ne les propietats magnètiques i la capacitat de formació de vidre. Entre altres s'ha usat el Zr, Mo, Y i el Gd per millorar la formació de vidre; i el Co i el Ni per millorar les propietats magnètiques a alta temperatura. S'han estudiat les relacions entre la capacitat de formació de vidre i la seva estabilitat tèrmica, la resistència a la cristal•lització i la estructura de l'aliatge resultant després del procés de solidificació. Per aquest estudi s'han determinat els mecanismes que controlen la transformació i la seva cinètica així com les fases que es formen durant el tractament tèrmic permetent la formulació de models predictius.

Potencial de alimentação de Chrysoperla externa (Hagen, 1861) (Neuroptera, Chrysopidae) em diferentes densidades de Uroleucon ambrosiae (Thomas, 1878) (Hemiptera, Aphididae)

Feeding potential of Chrysoperla externa (Hagen) (Neuroptera, Chrysopidae) in different densities of Uroleucon ambrosiae (Thomas) (Hemiptera, Aphididae). The feeding potential of 2nd and 3rd instar larvae of Chrysoperla externa (Hagen, 1861) in relation to different densities of 30, 40 and 50 nymphs of Uroleucon ambrosiae (Thomas, 1878) at 3rd and 4th instars was evaluated. The treatments were individualized into 2.5 cm in diameter and 8.5 cm tall flat bottom glass vials and maintained in a controlled environmental chamber at 25±2 ºC temperature, 70±10% RH and 14 h photophase. A completely randomized experimental design with 10 replications was used. The consumption of the prey nymphs by the predator larvae was evaluated after 1, 2, 4, 8, 16 and 24 h from the beginning of the experiment and at every subsequent 24 h period until 2nd instar larvae molted or 3rd instar larvae pupated. Results have shown that for 2nd instar larvae, during the 1 h to 24 h period, there was a decreasing prey consumption at the 30 and 40 prey densities. However an increase in the consumption at the 50 prey density was observed. After this period, C. externa larvae presented a progressive increase on nymphs consumption as a function of the prey density. The same occurred with de 3rd instar predator larvae in all treatments. When daily mean consumption was evaluated the predator/prey ratio was 1:23, 1:27 and 1:33 for 2nd instar larvae and 1:27, 1:33 and 1:41 for 3rd instar larvae at 30, 40 and 50 nymph densities, respectively.

Scaling the microrheology of living cells

We report a scaling law that governs both the elastic and frictional properties of a wide variety of living cell types, over a wide range of time scales and under a variety of biological interventions. This scaling identifies these cells as soft glassy materials existing close to a glass transition, and implies that cytoskeletal proteins may regulate cell mechanical properties mainly by modulating the effective noise temperature of the matrix. The practical implications are that the effective noise temperature is an easily quantified measure of the ability of the cytoskeleton to deform, flow, and reorganize.

Les pintures murals de la basílica de "Es Cap des Port" (Fornells, Menorca): materials i tècniques

El present treball ofereix una revisió de les pintures murals de la basílica de «Es Cap des Port» (Fornells, Menorca), així com un estudi de caracterització arqueometrica deIs materials i tecniques per microscopia optica, tant amb lupa binocular com amb micro scopi petrografic mitjanliant ¡¡lmina prima, difracció de raigs X i microscopia electronica de rastreig. Els resultats han permes identificar els pigments emprats, així com la seva tecnica d'aplicació. Igua!ment, han permes caracteritzar els morters i han desvelat l' existencia de dos tipus diferents de suporto Malgrat aquestes diferencies en els morters, els pigments són sempre els mateixos per a tots els conjunts pictorics caracteritzats.

Evaluation of the Chemical Durability of Iowa Fly Ash Concretes, HR-327, 1993

The major objective of this research project was to investigate how Iowa fly ashes influenced the chemical durability of portland cement based materials. Chemical durability has become an area of uncertainty because of the winter application of deicer salts (rock salts) that contain a significant amount of sulfate impurities. The sulfate durability testing program consisted of monitoring portland cement-fly ash paste, mortar and concrete test specimens that had been subjected to aqueous solutions containing various concentrations of salts (both sulfate and chloride). The paste and mortar specimens were monitored for length as a function of time. The concrete test specimens were monitored for length, relative dynamic modulus and mass as a function of time. The alkali-aggregate reactivity testing program consisted of monitoring the expansion of ASTM C311 mortar bar specimens that contained three different aggregates (Pyrex glass, Oreapolis and standard Ottawa sand). The results of the sulfate durability study indicated that the paste and concrete test specimens tended to exhibit surface spalling but only very slow expansive tendencies. This suggested that the permeability of the test specimens was controlling the rate of deterioration. Concrete specimens are still being monitored because the majority of the test specimens have expanded less than 0.05%; hence, this makes it difficult to estimate the service life of the concrete test specimens or to quantify the performance of the different fly ashes that were used in the study. The results of the mortar bar studies indicated that the chemical composition of the various fly ashes did have an influence on their sulfate resistance. Typically, Clinton and Louisa fly ashes performed the best, followed by the Ottumwa, Neal 4 and then Council Bluffs fly ashes. Council Bluffs fly ash was the only fly ash that consistently reduced the sulfate resistance of the many different mortar specimens that were investigated during this study. None of the trends that were observed in the mortar bar studies have yet become evident in the concrete phase of this project. The results of the alkali-aggregate study indicated that the Oreapolis aggregate is not very sensitive to alkali attack. Two of the fly ashes, Council Bluffs and Ottumwa, tended to increase the expansion of mortar bar specimens that contained the Oreapolis aggregate. However, it was not clear if the additional expansion was due to the alkali content of the fly ash, the periclase content of the fly ash or the cristobalite content of the fly ash, since all three of these factors have been found to influence the test results.

Avaluació de l'aptitud de bioestabilitzats com a esmena orgànica per a la rehabilitació de sòls

L’objectiu d’aquest estudi ha estat avaluar l’efecte que té sobre algunes propietats fisicoquímiques del sòl i el creixement de plantes, l’adició del producte compostat obtingut a partir de la fracció orgànica dels residus sòlids urbans de recollida no selectiva, material anomenat bioestabilitzat. S’ha dut a terme un bioassaig amb blat (Triticum aestivum), utilitzant bioestabilitzat procedent de dues plantes de tractament mecànic i biològic, Vacarisses i Mataró, que s’ha aplicat a diferents dosis en un sòl de baixa qualitat. S’ha observat una relació positiva entre el creixement del blat i la dosis de bioestabilitzat aplicada. Pel que fa a la germinació, ha estat lleugerament estimulada per les dosis intermèdies de bioestabilitzat assajades. En quant a les propietats fisicoquímiques del sòl, s’ha observat un increment de la salinitat en funció de la dosis de bioestabilitzat aplicada, que en les més elevades podria ser problemàtica. També, el contingut de matèria orgànica ha augmentat de manera proporcional a la dosis, cosa que ha millorat les propietats físiques del sòl. Per altra banda, s’han trobat continguts d’impropis (vidre, plàstic ...) i concentracions d’alguns metalls pesants bastant elevades, així com una considerable variabilitat entre les partides de bioestabilitzat. Finalment, es conclou que abans de permetre l’aplicació de bioestabilitzat per a la rehabilitació de sòls degradats, cal aprofundir més en l’estudi d’aquest material.

Scale Effects in Hydraulic Model Tests of Rock Protected Structures, HR-119, 1970

A laboratory investigation was undertaken to determine the limiting model Reynolds number above which the scour behavior of rock protected structures can be reproduced in hydraulic models scaled according to the Froude criterion. A submerged jet was passed over an initially full scour pocket containing uniform glass spheres and the rate of scour was measured as a function of time. The dimensions of the scour pocket and jet and the particle diameters were varied as needed to maintain strict geometric similarity. For each of two different Froude numbers the Reynolds number was varied over a wide range. The normalized scour rate was found to be practically independent of the Reynolds number, R, (based on the jet velocity and particle diameter) at values of R above about 2.5 x 10^3, and to decrease with Rat smaller values. A grid placed in the jet was found to have a very strong effect on the scour rate. In an attempt to explain the effect of R on the scour behavior, turbulent pressure and velocity fluctuations were measured in air flows and water flows, respectively, over rigid scour pockets having the same geometry as those formed in the scour experiments. The normalized spectra of the fluctuations were found to be nearly independent of R, but the flow pattern was found to be very sensitive to the inlet condition, the jet deflecting upward or downward in a not wholly explainable manner. This indicates that scour behavior can be modeled only if the approach flow is also accurately modeled.

Les pintures murals negres del monestir de Pedralbes: problemes de conservació-restauració causats per l’envelliment de l’acetat de polivinil

Aquesta tesi s’inicia com un treball de recerca i posteriorment passa a formar part delprojecte de recerca BHA2002-02411 fi nançat pel Ministerio de Ciencia y Tecnología, dins elPlan Nacional de I+D+I (2000-2003).La idea principal, però, s’origina a partir d’un encàrrec professional del Museu-Monestir dePedralbes i del Museu d’Història de la Ciutat l’any 2000.Les pintures murals negres (Figura 1) són una de les obres menys vistoses, de les que tenenmenys protagonisme, d’entre les que integren la col·lecció del Museu-Monestir de Pedralbes.No semblen, a priori, l’obra més interessant des del punt de vista d’un encàrrec professionalper a un conservador-restaurador. Però el poc que es coneix de les pintures negres i la sevararesa (es desconeixen altres pintures similars que s’hagin pogut conservar), així com lespatologies derivades del seu arrencament i traspàs l’any 1974, aconsellaven aprofundir en el seu estudi, que, mica en mica, va acabar resultant absorbent.