Primary stability of two uncemented acetabular components of different geometry : hemispherical or peripherally enhanced?

Objective This study compared the primary stability of two commercially available acetabular components from the same manufacturer, which differ only in geometry; a hemispherical and a peripherally enhanced design (peripheral self-locking (PSL)). The objective was to determine whether altered geometry resulted in better primary stability. Methods Acetabular components were seated with 0.8 mm to 2 mm interference fits in reamed polyethylene bone substrate of two different densities (0.22 g/cm3 and 0.45 g/cm3). The primary stability of each component design was investigated by measuring the peak failure load during uniaxial pull-out and tangential lever-out tests. Results There was no statistically significant difference in seating force (p = 0.104) or primary stability (pull-out p = 0.171, lever-out p = 0.087) of the two components in the low-density substrate. Similarly, in the high-density substrate, there was no statistically significant difference in the peak pull-out force (p = 0.154) or lever-out moment (p = 0.574) between the designs. However, the PSL component required a significantly higher seating force thanthe hemispherical cup in the high-density bone analogue (p = 0.006). Conclusions Higher seating forces associated with the PSL design may result in inadequate seating and increased risk of component malpositioning or acetabular fracture in the intra-operative setting in high-density bone stock. Our results, if translated clinically, suggest that a purely hemispherical geometry may have an advantage over a peripherally enhanced geometry in high density bone stock.

Could MOOCs answer the problems of teaching AQF required skills in Australian tertiary programmes?

From 2015, Australian universities will be required to demonstrate that their programmes explicitly teach, and assess achievement of, knowledge and skills and the application of both as specified by the Australian Qualifications Framework (AQF). Over the last twenty years, the sector has applied significant effort and resource to embedding the development of skills through tertiary programmes. Despite these national and institutional efforts, employer and industry concerns remain about the quality of graduate skills. The authors propose a ‘massive open online course’ (MOOC) approach to teaching and assessing AQF required skills. As an example the paper identifies the skills modules that would need to be developed by experts in each skill area for AQF level 9 master’s by coursework programmes. The proposed MOOC would include assessment tasks and rubrics allowing students to develop and demonstrate achievement of the AQF required skills. The assessment tasks could be used by institutions to provide evidence of attainment of coursework master’s standards.

Examining workload models in online and blended teaching

Over the past decade, most Australian universities have moved increasingly towards online course delivery for both undergraduate and graduate programs. In almost all cases, elements of online teaching are part of routine teaching loads. Yet detailed and accurate workload data are not readily available. As a result, institutional policies on academic staff workload are often guided more by untested assumptions about reduction of costs per student unit, rather than being evidence-based, with the result that implementation of new technologies for online teaching has resulted in poorly defined workload expectations. While the academics in this study often revealed a limited understanding of their institutional workload formulas, which in Australia are negotiated between management and the national union through their local branches, the costs of various types of teaching delivery have become a critical issue in a time of increasing student numbers, declining funding, pressures to increase quality and introduce minimum standards of teaching and curriculum, and substantial expenditure on technologies to support e-learning. There have been relatively few studies on the costs associated with workload for online teaching, and even fewer on the more ubiquitous ‘blended’, ‘hybrid’ or ‘flexible’ modes, in which face-to-face teaching is supplemented by online resources and activities. With this in mind the research reported here has attempted to answer the following question: What insights currently inform Australian universities about staff workload when teaching online?

A CLASS act : the teaching team approach to subject coordination

Advancing the development of good practice around the teaching team has been the focus of a recently completed, nationally funded Australian grant entitled Coordinators Leading Advancement of Sessional Staff (CLASS). The project focused on developing leadership capacity of subject coordinators to provide supportive contexts for sessional staff to enhance their knowledge of teaching practice and contribute to subject improvement through a team approach. An action learning approach and notions of distributed leadership underpinned the activities of the teaching teams in the program. This paper provides an overview of a practical approach, led by the subject coordinator, to engaging sessional staff through the facilitation of a supportive network within the teaching team. It addresses some of the gaps identified in the recent literature which includes lack of role clarity for all members of the team and provides some examples of initiatives that teams engaged with to address some of the challenges identified. Resources to support this approach were developed and are shared through the project website. Recommendations for future direction include improved policy and practice at the institutional level, better recognition and reward for subject coordinators and resourcing to support the participation and professional development needs of sessional staff.

Approaches to inquiry teaching : elementary teacher’s perspectives

Learning science through the process of inquiry is advocated in curriculum documents across many jurisdictions. However, a number of studies suggest that teachers struggle to help students engage in inquiry practices. This is not surprising as many teachers of science have not engaged in scientific inquiry and possibly hold naïve ideas about what constitutes scientific inquiry. This study investigates teachers’ self-reported approaches to teaching science through inquiry. Phenomenographic interviews undertaken with 20 elementary teachers revealed teachers identified six approaches to teaching for inquiry, clustered within three categories. These approaches were categorized as Free and Illustrated Inquiry as part of experience-centered category, Solution and Method Inquiry as part of problem-centered category, and Topic and Chaperoned Inquiry as part of a question-centered category. This study contributes to our theoretical understanding of how teachers approach Inquiry Teaching, and suggests fertile areas of future research into this valued and influential phenomenon broadly known as “Inquiry Teaching”.

The ABCs of teaching alphabet knowledge : affordances and challenges of ‘weaving’ visible and invisible pedagogies

As researchers interested in the pursuit of high quality/high equity literacy learning outcomes, we focus on the learning experiences of five early years French students, with a special regard for those who are already considered as being at-risk of educational failure. We narrow the empirical focus to a single lesson on a mechanical concept of print, that is matching lower and upper case alphabet letters. In doing so, we examine a deeply philosophical question: Which pedagogical practices dis/enable what sorts of early years students as literacy learners? We extend Cazden’s (2006) notion of ‘weaving’ knowledge across dimensions of knowing to describe how the case study teacher ‘weaves’ visible and invisible pedagogies over the four movements of a lesson. The findings reveal different pedagogical framings (Bernstein, 1996) have potentially different cognitive and social effects that constitute different kinds of literacy knowledge and oppressive subject positions for at-risk students (Young, 1990).

Creating efficiencies in teaching : where are the right resources when you need them?

Early career engineering academics are encouraged to join and contribute to established research groups at the leading edge of their discipline. This is often facilitated by various staff development and support programs. Given that academics are often appointed primarily on the basis of their research skills and outputs, such an approach is justified and is likely to result in advancing the individual academic’s career. It also enhances their capacity to attract competitive research funding, while contributing to the overall research performance of their institution, with further potential for an increased share of government funding. In contrast, there is much less clarity of direction or availability of support mechanisms for those academics in their role as teachers. Following a general induction to teaching and learning at their institution, they would commonly think about preparing some lecture materials, whether for delivery in a face-to-face or on-line modality. Typically they would look for new references and textbooks to act as a guide for preparing the content. They would probably find out how the course has been taught before, and what laboratory facilities and experiments have been used. In all of these and other related tasks, the majority of newly appointed academics are guided strongly by their own experiences as students, rather than any firm knowledge of pedagogical principles. At a time of increased demands on academics’ time, and high expectations of performance and productivity in both research and teaching, it is essential to examine possible actions to support academics in enhancing their teaching performance in effective and efficient ways. Many resources have been produced over the years in engineering schools around the world, with very high intellectual and monetary costs. In Australia, the last few years have seen a surge in the number of ALTC/OLT projects and fellowships addressing a range of engineering education issues and providing many resources. There are concerns however regarding the extent to which these resources are being effectively utilised. Why are academics still re-inventing the wheel and creating their own version of teaching resources and pedagogical practice? Why do they spend so much of their precious time in such an inefficient way? A symposium examining the above issues was conducted at the AAEE2012 conference, and some pointers to possible responses to the above questions were obtained. These are explored in this paper and supplemented by the responses to a survey of a group of engineering education leaders on some of the aspects of these research questions. The outcomes of the workshop and survey results have been analysed in view of the literature and the ALTC/OLT sponsored learning and teaching projects and resources. Other factors are discussed, including how such resources can be found, how their quality might be evaluated, and how assessment may be appropriately incorporated, again using readily available resources. This study found a strong resonance between resources reuse with work on technology acceptance (Davis, 1989), suggesting that technology adoption models could be used to encourage resource sharing. Efficient use of outstanding learning materials is an enabling approach. The paper provides some insights on the factors affecting the re-use of available resources, and makes some recommendations and suggestions on how the issue of resources re-use might be incorporated in the process of applying and completing engineering education projects.

Research and/or learning and teaching : a study of Australian professors' priorities, beliefs and behaviours

This paper presents findings from an empirical study of key aspects of the teaching and research priorities, beliefs and behaviours of 72 professorial and associate professorial academics in Science, Information Technology and Engineering across four faculties in three Australian universities. The academics ranked 16 research activities and 16 matched learning and teaching (L&T) activities from three perspectives: job satisfaction, role model behaviour and perceptions of professional importance. The findings were unequivocally in favour of research in all three areas and remarkably consistent across the universities. The only L&T activity that was ranked consistently well was 'improving student satisfaction ratings for teaching', an area in which academics are increasingly held accountable. Respondents also indicated that their seniors encourage research efforts more than L&T efforts. Recommendations include that higher education rewards for quality L&T are maintained or improved and that recognition of L&T research domains is further strengthened.

Challenges of elementary science teaching: an Australian perspective

This chapter profiles research that has explored the role of affect in the teaching of science in Australia particularly on primary or elementary science education. Affect is a complex set of characteristics that relate to the interactions between an individual’s knowledge and emotional responses to a stimulus. Thus, there are many dimensions and theoretical frameworks that inform our understanding of how and why people behave in particular ways.

Objectifying the Subjective : Assessment and Feedback in Creative Arts Studio Learning and Teaching

This paper examines the Assessment and Feedback aspects of Studio Teaching as Creative Arts pedagogy. Prompted by USQ’s newly offered Bachelor of Creative Arts (BCA), the author has developed an Assessment Matrix specifically designed to satisfy a number of imperatives, including: • ‘objectifying’ the subjective aspects of creative practice as assessable coursework/research • providing the means by which accurate, detailed, personalised and confidential feedback may be provided to students individually • providing consistent, accurate, meaningful assessment records for student, lecturer, and institution • ensuring consistency, continuity, and transparency of assessment processes and records to satisfy quality audits • minimising marking and assessment time, whilst maximising assessment integrity and depth • requiring only basic level skills and knowledge of a computer application already in common use (Microsoft Excel) • adaptability to a range of creative courses ‐ across disciplines This Assessment Matrix has been in development (and trialled) since January 2009.

Too many cooks? Co-creating and co-teaching studio courses in the creative media context : a career-focussed approach

This Case Study relates to the creation and implementation of career‐focussed courses in Creative Media for film, television, animation, broadcast and web contexts. The paper examines the advantages and disadvantages of co‐teaching, and how different professional and academic backgrounds and disciplines can productively inform curriculum design and delivery in the academic/professional context. The authors, as co‐creators and co‐lecturers, have developed a number of courses which represent current working models for intermediate to advanced level academic/professional study, and attract students from across the creative disciplines; including theatre, media, visual arts and music. These courses are structured to develop in students a wide range of aesthetic and technical skills, as well as their ability to apply those skills professionally within and across the creative media industries. Issues regarding the balance between academic rigour, practical hands‐on skill development, assessment, logistics, resources, teamwork and other issues, are examined in the paper.

Technological tools for science classrooms : choosing and using for productive and sustainable teaching and learning experiences

In this age of rapidly evolving technology, teachers are encouraged to adopt ICTs by government, syllabus, school management, and parents. Indeed, it is an expectation that teachers will incorporate technologies into their classroom teaching practices to enhance the learning experiences and outcomes of their students. In particular, regarding the science classroom, a subject that traditionally incorporates hands-on experiments and practicals, the integration of modern technologies should be a major feature. Although myriad studies report on technologies that enhance students’ learning outcomes in science, there is a dearth of literature on how teachers go about selecting technologies for use in the science classroom. Teachers can feel ill prepared to assess the range of available choices and might feel pressured and somewhat overwhelmed by the avalanche of new developments thrust before them in marketing literature and teaching journals. The consequences of making bad decisions are costly in terms of money, time and teacher confidence. Additionally, no research to date has identified what technologies science teachers use on a regular basis, and whether some purchased technologies have proven to be too problematic, preventing their sustained use and possible wider adoption. The primary aim of this study was to provide research-based guidance to teachers to aid their decision-making in choosing technologies for the science classroom. The study unfolded in several phases. The first phase of the project involved survey and interview data from teachers in relation to the technologies they currently use in their science classrooms and the frequency of their use. These data were coded and analysed using Grounded Theory of Corbin and Strauss, and resulted in the development of a PETTaL model that captured the salient factors of the data. This model incorporated usability theory from the Human Computer Interaction literature, and education theory and models such as Mishra and Koehler’s (2006) TPACK model, where the grounded data indicated these issues. The PETTaL model identifies Power (school management, syllabus etc.), Environment (classroom / learning setting), Teacher (personal characteristics, experience, epistemology), Technology (usability, versatility etc.,) and Learners (academic ability, diversity, behaviour etc.,) as fields that can impact the use of technology in science classrooms. The PETTaL model was used to create a Predictive Evaluation Tool (PET): a tool designed to assist teachers in choosing technologies, particularly for science teaching and learning. The evolution of the PET was cyclical (employing agile development methodology), involving repeated testing with in-service and pre-service teachers at each iteration, and incorporating their comments i ii in subsequent versions. Once no new suggestions were forthcoming, the PET was tested with eight in-service teachers, and the results showed that the PET outcomes obtained by (experienced) teachers concurred with their instinctive evaluations. They felt the PET would be a valuable tool when considering new technology, and it would be particularly useful as a means of communicating perceived value between colleagues and between budget holders and requestors during the acquisition process. It is hoped that the PET could make the tacit knowledge acquired by experienced teachers about technology use in classrooms explicit to novice teachers. Additionally, the PET could be used as a research tool to discover a teachers’ professional development needs. Therefore, the outcomes of this study can aid a teacher in the process of selecting educationally productive and sustainable new technology for their science classrooms. This study has produced an instrument for assisting teachers in the decision-making process associated with the use of new technologies for the science classroom. The instrument is generic in that it can be applied to all subject areas. Further, this study has produced a powerful model that extends the TPACK model, which is currently extensively employed to assess teachers’ use of technology in the classroom. The PETTaL model grounded in data from this study, responds to the calls in the literature for TPACK’s further development. As a theoretical model, PETTaL has the potential to serve as a framework for the development of a teacher’s reflective practice (either self evaluation or critical evaluation of observed teaching practices). Additionally, PETTaL has the potential for aiding the formulation of a teacher’s personal professional development plan. It will be the basis for further studies in this field.

Evaluation of two-view geometry methods with automatic ground-truth generation

A large number of methods have been published that aim to evaluate various components of multi-view geometry systems. Most of these have focused on the feature extraction, description and matching stages (the visual front end), since geometry computation can be evaluated through simulation. Many data sets are constrained to small scale scenes or planar scenes that are not challenging to new algorithms, or require special equipment. This paper presents a method for automatically generating geometry ground truth and challenging test cases from high spatio-temporal resolution video. The objective of the system is to enable data collection at any physical scale, in any location and in various parts of the electromagnetic spectrum. The data generation process consists of collecting high resolution video, computing accurate sparse 3D reconstruction, video frame culling and down sampling, and test case selection. The evaluation process consists of applying a test 2-view geometry method to every test case and comparing the results to the ground truth. This system facilitates the evaluation of the whole geometry computation process or any part thereof against data compatible with a realistic application. A collection of example data sets and evaluations is included to demonstrate the range of applications of the proposed system.

A state-wide systems approach to embedding the learning and teaching of sustainability in teacher education

Education systems have a key role to play in preparing future citizens to engage in sustainable living practices and help create a more sustainable world. Many schools throughout Australia have begun to develop whole-school approaches to sustainability education that are supported by national and state policies and curriculum frameworks. Preservice teacher education, however, lags behind in building the capacity of new teachers to initiate and implement such approaches (ARIES, 2010). This proposed project seeks to develop a state-wide systems approach to embedding Education for Sustainability (EfS) in teacher education that is aligned with the Australian National Curriculum and the aspirations for EfS in the Melbourne Declaration and other national documents. Representatives from all teacher education institutions and other agents of change in the Queensland education system will be engaged in a multilevel systems approach, involving collaboration at the state, institutional and course levels, to develop curriculum practices that reflect a shared vision of EfS.