Fouling of waste heat recovery : numerical and experimental results

Numerical results are presented to investigate the performance of a partly-filled porous heat exchanger for waste heat recovery units. A parametric study was conducted to investigate the effects of inlet velocity and porous block height on the pressure drop of the heat exchanger. The focus of this work is on modelling the interface of a porous and non-porous region. As such, numerical simulation of the problem is conducted along with hot-wire measurements to better understand the physics of the problem. Results from the two sources are then compared to existing theoretical predictions available in the literature which are unable to predict the existence of two separation regions before and after the porous block. More interestingly, a non-uniform interface velocity was observed along the streamwise direction based on both numerical and experimental data.

Contributions to Bayesian experimental design

This thesis progresses Bayesian experimental design by developing novel methodologies and extensions to existing algorithms. Through these advancements, this thesis provides solutions to several important and complex experimental design problems, many of which have applications in biology and medicine. This thesis consists of a series of published and submitted papers. In the first paper, we provide a comprehensive literature review on Bayesian design. In the second paper, we discuss methods which may be used to solve design problems in which one is interested in finding a large number of (near) optimal design points. The third paper presents methods for finding fully Bayesian experimental designs for nonlinear mixed effects models, and the fourth paper investigates methods to rapidly approximate the posterior distribution for use in Bayesian utility functions.

Fruit-feeding behaviour and use of olfactory cues by the fruit bat Rousettus leschenaulti: an experimental study

This paper describes the feeding behaviour ofRousettus leschenaulti Desmarest, 1820 on lychees, the preferred cultivated food of this bat in captive conditions. We found that feeding comprised 25–30% of the total activity of these animals in a flight cage and that feeding durations were not significantly different between two sexes. To evaluate the role of odor and vision in foraging behaviour, we provided animals with artificial lychees, real lychees and artificial lychees soaked in the juice of real lychees and we recorded the number of feeding approaches to the different “fruit” types. The results indicated that bats approached real fruit significantly more than artificial fruit, and that the number of approaches to the soaked artificial fruit was also significantly higher than to the unsoaked artificial fruit. There were no significant differences between sexes in approach rates to any “fruit” type. We discuss the role of different sensory cues in the foraging behaviour of these bats and emphasize that the olfactory cue is important in detecting food resources and discriminating between different kinds of food items.

Development of fourth-grade students’ understanding of experimental and theoretical probability

Students explored variation and expectation in a probability activity at the end of the first year of a 3-year longitudinal study across grades 4-6. The activity involved experiments in tossing coins both manually and with simulation using the graphing software, TinkerPlots. Initial responses indicated that the students were aware of uncertainty, although an understanding of chance concepts appeared limited. Predicting outcomes of 10 tosses reflected an intuitive notion of equiprobability, with little awareness of variation. Understanding the relationship between experimental and theoretical probability did not emerge until multiple outcomes and representations were generated with the software.

Interactive music formats : will audiences interact?

The purpose of this research was to conduct a pilot study of a prototype interactive music release format which sought to investigate the readiness of audiences to interact with an interactive alternative to a fixed recorded work. A prototype music interface was created for testing. The prototype was then tested on a sample of users to understand what factors might be critical to audience engagement. The research further investigated the potential implications of the interactive release format on musicians' creative process.

Experimental Study of crack propagation in carbon steel using acoustic emission

Acoustic emission technique has become a significant and powerful structural health monitoring tool for structures. Researches to date have been done on crack location, fatigue crack propagation in materials and severity assessment of failure using acoustic emission technique. Determining severity of failure in steel structures using acoustic emission technique is still a challenge to accurately determine the relationship between the severity of crack propagation and acoustic emission activities. In this study three point bending test on low carbon steel samples along with acoustic emission technique have been used to determine crack propagation and severity. A notch is introduced at the tension face of the loading point to the samples to initiate the crack. The results show that the percentage of load drop of the steel specimen has a reciprocal relationship with the crack opening i.e. crack opening zones are influenced by the loading rate. In post yielding region, common acoustic emission signal parameters such as, signal strength, energy and amplitudes are found to be higher than those at pre-yielding and at yielding.

Do we need a law to help people try experimental drugs?

People with life-threatening or incurable diseases may be willing to try experimental drugs and unproven treatments, but they face the risk of exploitation. Is the law the best avenue to ensure that they are protected while medical innovation is encouraged? Protection of vulnerable people is a thread running through many laws, in Australia and elsewhere. In medical law, for instance, children and people with impaired decision-making capacity warrant special attention. But what of the ordinary person diagnosed with a life-threatening disease? Such people are vulnerable to harm and potential exploitation when they seek access to innovative, experimental or unproven treatments that depart from the existing range of accepted medicine.

The impact of relaxing music on insomnia-related thoughts and behaviours

Insomnia is a pervasive problem involving poor sleep quality and quantity. Previous research has suggested that music listening can help alleviate insomnia, but exactly how music helps sleep problems has not been determined. A greater understanding of these processes could help practitioners to design more effective music-based insomnia treatments. This randomised controlled trial was designed to assess the influences of nightly music listening on the sleep-related thoughts and behaviours described in Harvey’s (2002) cognitive model of insomnia maintenance. University students, including a range of good and poor sleepers, were randomly assigned to a music listening group or a control group and were assessed before and after a two-week music listening intervention. Measures included a range of self-report scales, each assessing an element of Harvey’s cognitive model. During the intervention, the music listening group was asked to listen to provided music for at least 20 minutes each night. The control group was asked to maintain their regular nightly routines. Results indicated that the music listening group significantly improved on most of the factors theorised to influence sleep quality, although their actual sleep quality did not significantly improve. The control group did not change significantly on any measures. The results of this study suggest that music listening can have positive impacts on a range of factors theorised to influence sleep quality. However, as the music was not shown to actually improve sleep quality, Harvey’s cognitive model explanation of music’s effect on sleep quality may require further investigation.

Associations between early shared music activities in the home and later child outcomes : findings from the Longitudinal Study of Australian Children

The benefits of early shared book reading between parents and children have long been established,yet the same cannot be said for early shared music activities in the home. This study investigated the parent–child home music activities in a sample of 3031 Australian children participating in Growing Up in Australia: The Longitudinal Study of Australian Children (LSAC) study. Frequency of shared home music activities was reported by parents when children were 2–3 years and a range of social, emotional,and cognitive outcomes were measured by parent and teacher report and direct testing two years later when children were 4–5 years old. A series of regression analyses (controlling for a set of important socio-demographic variables) found frequency of shared home music activities to have a small significant partial association with measures of children’s vocabulary, numeracy, attentional and emotional regulation, and prosocial skills. We then included both book reading and shared home music activities in the same models and found that frequency of shared home music activities maintained small partial associations with measures of prosocial skills, attentional regulation, and numeracy. Our findings suggest there may be a role for parent-child home music activities in supporting children’s development.

Assessing the welfare effects of microfinance in Vietnam : empirical results from a quasi-experimental survey

This article analyses the effects of NGO microfinance programmes on household welfare in Vietnam. Data on 470 households across 25 villages were collected using a quasi-experimental survey approach to overcome any self-selection bias. The sample was designed so that member households of microfinance programmes were compared with non-member households with similar characteristics. The analysis shows no significant effects of participation in NGO microfinance on household welfare, proxied by income and consumption per adult equivalent.

From music student to industry professional: An entrepreneurial learning design

This design-based research project addresses the gap between formal music education curricula and the knowledge and skills necessary to enter the professional music industry. It analyses the work of a teacher/researcher who invited her high school students to start their own business venture, Youth Music Industries (YMI). YMI also functioned as a learning environment informed by the theoretical concepts of communities of practice and social capital. The students staged cycles of events of various scales over a three-year period, as platforms for young artists to engage and develop new, young audiences across Queensland, Australia. The study found that students developed an entrepreneurial mindset through acquisition of specific skills and knowledge. Their learning was captured and distilled into a set of design principles, a pedagogical approach transferrable across the creative industries more broadly.

Experimental and numerical investigation of strain-rate dependent mechanical properties of single living cells

The objective of this project is to investigate the strain-rate dependent mechanical behaviour of single living cells using both experimental and numerical techniques. The results revealed that living cells behave as porohyperlastic materials and that both solid and fluid phases within the cells play important roles in their mechanical responses. The research reported in this thesis provides a better understanding of the mechanisms underlying the cellular responses to external mechanical loadings and of the process of mechanical signal transduction in living cells. It would help us to enhance knowledge of and insight into the role of mechanical forces in supporting tissue regeneration or degeneration.

Book Review: "Metal Rules the Globe: Heavy Metal Music around the World". Durham, NC: Duke University Press.

It is rare to find an anthology that realizes the possibilities of the form. We tend to regard our edited collections as lesser siblings, and forget their special value. But at times, a subject seems to require an edited collection much more than it does a classic monograph. So it is with the subject showcased here, which concerns the global circulation, performance and consumption of heavy metal. This is a relatively new and emerging body of work, hitherto scattered disparately in the broader popular music studies, but quickly gaining status as a “studies” with the establishment of a global conference, a journal, and publication of this anthology, all in recent years. Metal Rules the Globe took the editors’ a decade to compile. That they have thought deeply about how they want the collection to speak shows through in the book’s thoughtful arrangement and design, and in the way in which they draw on the contributions herein to develop for the field a research agenda that will take it forward...

Experimental studies of cold-formed steel hollow section columns at elevated temperatures

This paper reports the details of an experimental study of cold-formed steel hollow section columns at ambient and elevated temperatures. In this study the global buckling behaviour of cold-formed Square Hollow Section (SHS) slender columns under axial compression was investigated at various uniform elevated temperatures up to 700℃. The results of these column tests are reported in this paper, which include the buckling/failure modes at elevated temperatures, and ultimate load versus temperature curves. Finite element models of tested columns were also developed and their behaviour and ultimate capacities at ambient and elevated temperatures were studied. Fire design rules given in European and American standards including the Direct Strength Method (DSM) based design rules were used to predict the ultimate capacities of tested columns at elevated temperatures. Elevated temperature mechanical properties and stress-strain models given in European steel design standards and past researches were used with design rules and finite element models to investigate their effects on SHS column capacities. Comparisons of column capacities from tests and finite element analyses with those predicted by current design rules were used to determine the accuracy of currently available column design rules in predicting the capacities of SHS columns at elevated temperatures and the need to use appropriate elevated temperature material stress-strain models. This paper presents the important findings derived from the comparisons of these column capacities.