996 resultados para Exames de massa
Resumo:
Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels
Resumo:
Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.
Resumo:
To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles
Resumo:
Background: Malnutrition, inflammation and comorbidities are frequent in patients with chronic renal failure in hemodialysis (HD), contributing for morbidity and mortality. Aims: To evaluate the correlation between anthropometric, laboratory parameters, bioelectrical impedance (BIA) and inflammatory markers with the morbidity and mortality of patients in HD, as well as the impact of its alterations throughout 12 months. Methods: 143 patients of a dialysis facility in Northeast Brazil were evaluated throughout 18 months. Patients with more than 3 months on dialysis, older than 18 years, without amputation of hands and feet, were included in the study. We performed a clinical (subjective global assessment - SGA), anthropometric (BMI, percent of ideal weight, MAC, MAMC, MAMA, percent of fat mass and TSF), laboratory (albumin, creatinine, lymphocyte count as nutritional markers and CRP, IL-6 and TNF- as inflammatory markers) evaluation and BIA (reactance, phase angle and percent of body cell mass) at the beginning of study and after 3, 6 and 12 months of follow-up. The association between study variables and deaths and hospitalizations in 6 and 12 months was investigated. The variable with significance < 10% in the univariate analysis had been enclosed in a multivariate logistic regression analysis. We also investigated the risk of mortality and hospitalization associated with differences in measurements of the variables at baseline and six months later. Results: Patients were aged 52.2 ± 16.6 years on the average, 58% were male, and mean dialysis vintage was 5.27 ± 5.12 years. The prevalence of malnutrition varied from 7.7-63.6%, according to the nutritional marker. The variables associated with morbidity and mortality in 6 and 12 months had been creatinine ≤ 9.45 mg/dl, phase angle ≤ 4.57 degrees, BMI ≤ 23 kg/m2, age ≤ 64.9 years, reactance ≤ 51.7 ohms; Charlson´s index ≥ 4 and socioeconomic status ≤ 7. During six months of follow up, decrease in albumin was associated with significantly higher mortality risk. Conclusions: This study detected that the best predictors of morbidity and mortality between nutritional and inflammatory markers are phase angle, reactance, creatinine and BMI and that changes in albumin values over six 107 months provide additional prognostic information. The authors believe that parameters of BIA may detect early changes in nutritional status and emphasize that longitudinal studies with larger number of patients are necessary to confirm these data and to recommend BIA as a routine nutritional evaluation in HD patients
Resumo:
This descriptive study aimed to investigate the relationship between expression of immunological (TCD4 +) and virological (viral load) parameters, lipodystrophy syndrome and lifestyle variables of people living with HIV who underwent a program of physicalexercise. Initially, the sample was composed by 17 persons, recorded at the Department of Giselda Trigueiro Hospital Care (GTH), Natal-RN . With the passing of the stages of intervention (physical training program- PTP) the number of participants has changed (17, 9, 8 and 7) as the training phases (I, II, III and IV). Data collected were on total cholesterol, High Density Lipoprotein (HDL) and triglycerides. The % fat (% F), body mass index (BMI), waist-hip ratio (WHR), lean mass (LM), central fat (BF), total (TF) and peripheral (PF), weight and height were used to measure the morphological parameters. For control of variables (TCD4 +, viral load, Triglycerides, Cholesterol, HDL), the information contained in the blood tests every four months were investigated. After Phase I and II, it was used a structured interview. Then sampling was carried out considering the pre-and post-tests 1, 2, 3 and 4 (after 16, 32, 48 and 64 weeks of training, respectively). Daily, the intensity of the work was checked by the scale of perceived exertion for exercises adapted to resistance34. Procedures used were descriptive statistics (dispersion, absolute and relative frequencies, means, standard deviations and minimum and maximum values) as well as Spearman linear correlation adopting a significance level of p ≤ 0.05. Positive changes were observed for TCD4 + and viral load in all phases of the PTP. For the morphological components, the loss of central subcutaneous fat (CSF) and total subcutaneous fat (TSF) for both sexes and the decrease in % BF among women were the most dramatic results after the training phase I. For men, results were more significant to % F and LM in Phases I and II and peripheral subcutaneous fat (PSF) declined in all phases of the exercise. As for women, results were more expressive for % F and TM in the phases I and II and the PSF decreased in all phases of the exercise. Whereas for women, the waist/hip ratio (WCQ) and 0% F decreased and showed a positive association with triglycerides (WHR r * 0.82, p 0.042, r 0.88 TSF *, p 0.019 and r 1.00 ** CSF, p <0.001) and among men with limb subcutaneous fat (LSF)* r 0.65, p 0.029). The PTP provided improvement in the health, self-esteem and quality of life, proving to be a possible strategy to positively influence the expression of immunological parameters (TCD4 +) and virological (viral load) and morphological components of people living with HIV causing no deleterious effects in these parameters
Resumo:
Estudos que relacionam a atividade física e HIV/AIDS enfatizam a perspectiva biológica, demonstrando a sua relevância, apontam a preocupação em estabelecer um tipo de atividade e intensidade que não comprometa o sistema imunológico, enfatizando as melhorias do exercício sobre os parâmetros antropométricos, na aptidão física bem como um grande aumento da capacidade funcional para o grupo testado. Objetivo: O presente estudo se caracteriza como quase-experimental e objetivou analisar o padrão morfofuncional, marcadores hematológicos em pessoas vivendo com HIV/AIDS, através da oferta intervenção com exercícios anaérobicos (exercícios resistidos em sala de musculação) para pacientes portadores de HIV/AIDS. Métodos: A amostra foi composta por 11 indivíduos do gênero masculino, com média de idade de 43,2 anos, participantes do Programa Pro-Saúde e Atividade Física da Universidade Federal do Rio grande do Norte e atendimento clínico no Hospital Giselda Trigueiro da Secretaria de Estado de Saúde Pública/RN. A coleta de dados foi composta de exames laboratoriais para medir TCD4 e Carga Viral, medidas antropométricas: Índice de Massa Corporal - IMC, Relação Cintura Quadril- RCQ, e uma annamenese sociodemográfica. Para análise dos dados utilizou-se no presente estudo a estatistica descritiva com os valores de tendecia central e seus derivados. Para as variáveis de cunho discreto utilizou-se a análise de frequencia atavés de valores percentuais de aparecimento. Resultados: Os resultados entre os Pré e o Pós teste das variáveis estudadas foram assim apresentadas: para o IMC (pré média de 24,0 Kg/m2 e pós 24,2 Kg/m2), RCQ (pré média de 0,97cm e pós 0,95 cm), Somatório de Dobras cutâneas (Pré 117,1 e Pós 102,0), Somatório da Perimetria(Pré 310,5 e Pós 313,3), Força Escapular(Pré 30,9 Kgf e Pós 30,3 Kgf), Força Pressão Manual Direita(Pre 41,2 e Pós 42,1), Força Pressão Manual esquerda(Pré 39,4 e Pos 39,9), TCD4( Pré 579 e Pós 509 céls/mm3) e Carga Viral(pré e pós <50 cópias). Esses resultados apontam para uma melhora importante das variáveis antropométricas estudadas, principalmente em relação a RCQ, na contagem dos linfócitos TCD4 e manutenção da Carga Viral em níveis abaixo do limite mínimo(<50 cópias/ml) Conclusão:O Programa de Exercícios resistidos com características anaeróbicas promove melhorias no padrão morfofuncional, manutenção das células TCD4 em níveis considerados seguros para esta população e estabilização da carga viral, não apresentando riscos à saúde dos participantes
Resumo:
Introdução: A obesidade e suas formas extremas como a forma mórbida, vem assumindo preocupação nos sistemas de saúde pública e é atualmente considerado um dos mais importantes agravos de saúde no mundo desenvolvido. Acarreta repercussões em várias partes do corpo, com potencial para interferir negativamente também na função reprodutiva, recentemente sendo mais estudado na população masculina. Objetivo: avaliar parâmetros hormonais e seminais da função reprodutiva em um grupo de homens obesos mórbidos, antes e após 6 meses da perda de peso induzida pela cirurgia bariátrica. Métodos: Inicialmente, de uma amostra de 36 pacientes com idade entre 18 e 40 anos e índice de massa corporal (IMC) ≥40 Kg/m2, apenas 1 caso foi excluído por ser portador de hiperprolactinoma e outros 24 pacientes não completaram todo o protocolo de avaliação laboratorial solicitada. Um total de apenas 11 pacientes completou o protocolo. Todos foram previamente avaliados por uma equipe multidisciplinar. O grupo selecionado foi submetido a avaliação seminal e dosagens hormonais de testosterona total(TT), FSH e LH. Os parâmetros foram reavaliados após 6 meses de realização da cirurgia pela técnica de Y-em-Roux, para análise dos efeitos da perda de peso sobre os parâmetros da função reprodutiva. Resultados: No grupo selecionado ao estudo, os exames pré-operatórios mostraram um grupo heterogêneo de resultados. Após seis meses do tratamento cirúrgico, a perda ponderal foi significativa no grupo analisado, com redução do IMC de mediana 46 Kg/m2para mediana de 36 Kg/m2(p=0,03). Em relação ao perfil hormonal, houve elevação significativa do nível sérico de TT com mediana de 187ng/ml no período pré-operatório para 457 ng/ml (p=0,02) no período pós-operatório. Entre os períodos pré e pós-operatório, não foram observadas alterações significantes do FSH (2,70 mIU/ml para 3,31 mIU/ml, p=0,79), LH (4,82 mIU/ml para 3,00mIU/ml, p=0,39), concentração espermática (38milhões/ml para 31milhões/ml, p=0,88) e motilidade A+B (50% para 50%, p=0,89).Conclusão: A redução ponderal decorrente da cirurgia em obesos mórbidos parece levar a uma elevação dos níveis de testosterona total, sem alterações nas demais provas de avaliação reprodutiva. Estudos adicionais com casuística maior e múltiplos parâmetros são necessários para esclarecimento definitivo do impacto da obesidade e da perda de peso induzida pela cirurgia sobre a função reprodutiva masculina
Resumo:
A soja é uma das principais culturas agrícolas do Brasil, sendo a sua produtividade muito influenciada pela competição exercida pelas plantas daninhas. Foram realizados dois experimentos em casa de vegetação, em Jaboticabal, SP, objetivando determinar o acúmulo de massa seca, assim como a distribuição e o acúmulo de macronutrientes em plantas de soja, no período de outubro de 2000 a fevereiro de 2001, e de Solanum americanum, no período de janeiro a maio de 1995. As plantas cresceram em vasos com capacidade de 7 litros, preenchidos com areia de rio lavada e peneirada; elas foram irrigadas diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem, realizada a intervalos de 14 dias, iniciando-se 21 dias após a emergência (DAE), até 161 DAE para S. americanum e 119 DAE para soja cv. BR-16 (precoce). O ponto de máximo acúmulo teórico de massa seca deu-se aos 104 DAE para a soja (35,0 g por planta) e 143 DAE para S. americanum (179,62 g por planta). da emergência até 49 e 63 DAE, as folhas apresentaram maior participação no acúmulo de massa seca para soja e S. americanum, respectivamente. Após esses períodos, verificou-se, em ambas as espécies, inversão na representatividade das folhas por caules para a espécie daninha e por caules e, posteriormente, por estruturas reprodutivas, para a cultura. A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 69 e 87 DAE para a soja e entre 105 e 119 DAE para a planta daninha. Considerando a média dos valores de pontos de inflexão observados para a cultura da soja, tem-se que aos 75 DAE uma planta de soja acumula teoricamente 23,9 g de massa seca, 564,4 mg de N, 7,1 mg de P, 490,8 mg de K, 487,0 mg de Ca, 156,6 mg de Mg e 36,0 mg de S. Para o mesmo período, uma planta de S. americanum acumula teoricamente 33,75 g de massa seca, 875,96 mg de N, 88,46 mg de P, 983,54 mg de K, 647,60 mg de Ca, 100,93 mg de Mg e 42,15 mg de S.
Resumo:
Foram realizados dois experimentos, em condições de casa de vegetação, no Departamento de Biologia Aplicada à Agropecuária da FCAV-UNESP de Jaboticabal, objetivando-se determinar o acúmulo de massa seca, assim como a distribuição e o acúmulo de macronutrientes durante os ciclos de vida de plantas de soja cultivar BR16, no período de outubro de 2000 a fevereiro de 2001, e de Richardia brasiliensis (poaia-branca), uma planta daninha de elevada importância para esta cultura no Brasil, especialmente em áreas de plantio direto, no período de outubro de 1998 a fevereiro de 1999. Os estudos foram realizados em delineamento experimental inteiramente casualizado, com quatro repetições. Quatro plantas cresceram em vasos com capacidade de sete litros, preenchidos com areia de rio lavada, peneirada e irrigada diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem, realizadas a intervalos de 14 dias, a saber: 22, 36, 50, 64, 78, 92, 106, 120, 134, 148, 162 e 176 dias após a emergência (DAE) das plantas de R. brasiliensis; e 21, 35, 49, 63, 77, 91, 105 e 119 DAE das plantas de soja cv. BR-16 (precoce). em ambas as plantas, as folhas tiveram a maior partição de biomassa durante sete semanas. Para este dado, a partição foi maior para as estruturas reprodutivas em soja e nos caules para a poaia-branca. O ponto de máximo acúmulo teórico de massa seca deu-se aos 104 DAE para a soja (36,6 g por planta) e aos 146 DAE para a poaia-branca (16,4 g por planta). da emergência até aos 50 DAE as folhas apresentaram maior participação no acúmulo de massa seca, nas duas espécies. Após 50 DAE notou-se, em ambas as espécies, uma inversão na representatividade das folhas por caules, para a espécie daninha, e por caules e posteriormente por estruturas reprodutivas, para a cultura. A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 69 e 87 DAE para a soja e entre 106 a 111 DAE para a planta daninha. Levando em conta a média dos valores de pontos de inflexão observados para a cultura da soja, aos 78 DAE uma planta de soja acumula teoricamente 25,9 g de massa seca; 615,5 mg de N; 77,2 mg de P; 538,6 mg de K; 535,0 mg de Ca; 171,5 mg de Mg; e 39,5 mg de S. Para o mesmo período, uma planta de R. brasiliensis acumula teoricamente 3,7 g de massa seca; 50,8 mg de N; 3,2 mg de P; 104,4 mg de K; 127,8 mg de Ca; 18,8 mg de Mg; e 3,7 mg de S.
Resumo:
Foram realizados dois experimentos, em casa de vegetação, no Departamento de Biologia Aplicada à Agropecuária da FCAV-UNESP de Jaboticabal, objetivando-se determinar o acúmulo de massa seca e a distribuição e acúmulo de macronutrientes em plantas de milho, no período de outubro de 2000 a fevereiro de 2001, e de capim-marmelada, no período de setembro de 2003 a fevereiro de 2004. Os estudos foram realizados em delineamento experimental inteiramente casualizado, com quatro repetições. As plantas cresceram em vasos com capacidade de sete litros - preenchidos com areia de rio lavada e peneirada - e foram irrigadas diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem realizadas a intervalos de 14 dias, a saber: 21, 35, 49, 63, 77, 91, 105, 119 e 133 dias após a emergência (DAE) das plantas de milho; e 21, 35, 49, 63, 77, 91, 105, 119, 133 e 147 DAE das plantas de capim-marmelada. O ponto de máximo acúmulo teórico de massa seca deu-se aos 122 DAE para o milho (143,8 g por planta) e aos 143 DAE para o capim-marmelada (23,9 g por planta). A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 71 e 104 DAE para o milho e entre 96 e 111 DAE para a planta daninha. Levando-se em conta a média dos valores de pontos de inflexão observados na cultura do milho, aos 85 DAE uma planta de milho acumula, teoricamente, 83,0 g de massa seca; 788,9 mg de N; 137,5 mg de P; 1.385,6 mg de K; 551,8 mg de Ca; 217,9 mg de Mg; e 92,5 mg de S. Enquanto que, no mesmo período, uma planta de B. plantaginea acumula, teoricamente, 9,6 g de massa seca; 127,8 mg de N; 15,9 mg de P; 217,3 mg de K; 43,9 mg de Ca; 58,3 mg de Mg; e 15,8 mg de S.
Resumo:
Homosexuality has been gaining strength in Cinema from the late twentieth century, when there is a dissemination of freedoms around the peripheral or marginal sexualities. Based on this assumption, it was formulated in the dissertation work, an analysis of the relationship between Cinema and Sexuality in order to understand, describe, reflect and analyze possible changes around the performative behaviors of male homosexual from the introduction of them in film production, arising from the mass culture industry. These productions are located in three different decades. In this case, the Cinema has not only the reproductive character of realities, but also a producing agent and consolidating them. The methodology applied was discourse analysis of three film works, namely La Cage aux Folles (1978), In & Out (1997) and Boat Trip (2002). The image, research object of this work, is developed by a mass culture that will produce mass identities which is characterized by crystallization of clichés around the gay world
Resumo:
O presente trabalho foi desenvolvido na Área Experimental de Irrigação da Faculdade de Ciências Agrárias e Veterinárias de Jaboticabal/Unesp, com o objetivo de avaliar o efeito da fertirrigação sobre o teor foliar de macro e de micronutrientes, a massa fresca de raízes e a qualidade do suco de frutos em um pomar de laranja-'Valência'. Os tratamentos utilizados foram: (SI) sem irrigação e adubação com fertilizante sólido parcelado em quatro vezes; (MI-100) fertirrigação por microaspersão com 100% da evapotranspiração; (MI-50) fertirrigação por microaspersão com 50% da evapotranspiração; (G-100) fertirrigação por gotejamento com 100% da evapotranspiração; e (G-50) fertirrigação por gotejamento com 50% da evapotranspiração. Os teores de macro e micronutrientes nas folhas não foram alterados pela irrigação, pelos sistemas de fertirrigação e pela lâmina de água aplicada. A acidez total titulável foi superior no tratamento sem irrigação, e a % de suco no fruto e ratio não foram afetadas pelos tratamentos com e sem irrigação. A massa fresca de raiz foi maior nos tratamentos irrigados, porém não foram constatadas para esse parâmetro diferenças entre os sistemas de gotejamento e microaspersão. A maior concentração de raízes ocorreu até 10 cm de profundidade e até 30 cm de distância do emissor.
Resumo:
PURPOSE: To evaluate the effects of different concentrations of an anesthetic association in giant amazon turtles (Podocnemis expansa).METHODS: Twenty healthy P. expansa of both sexes weighing between 1.0 and 1.5kg commercially bred in the Araguaia River Valley, Goias, Brazil, were separated into two groups (G1 n=10 and G2 n=10). Each group received a respective protocol: P1=acepromazine (0.5 mg/kg IM) and propofol (5 mg/kg IV) and P2=acepromazine (0.5 mg/kg IM) and propofol (10 mg/kg IV). The acepromazine was administered in the left thoracic member and the propofol in the cervical vertebral sinus. Assessments were made of the anesthetic parameters of locomotion, muscle relaxation, response to pain stimuli in the right thoracic and pelvic members and heartbeat.RESULTS: The anesthetic induction time was the same for both protocols (P1 and P2); however the P2 effects were of a longer duration.CONCLUSION: The sedation achieved with both protocols (P1 and P2) were satisfactory for the biological sample collection, physical examinations and minor surgeries on this species.
Resumo:
There are few studies that relate the micronutrient manganese nutritional status and production of fodder. The objective was to evaluate the application of manganese in the nutrition and growth of Mombaca grass. The completely randomized design was used with five manganese levels (0, 15, 30, 60, 120 mg dm(-3)) and four replicates. Each experimental unit consisted of a pot filled with 3.5 dm(-3) of soil from Oxisol (Mn = 0.6 mg dm(-3)), containing four plants. Two harvests were set, the first 44 days after sowing and the second 38 days after the first cut. The concentration of manganese in the soils, the manganese content of leaves, number of tillers, plant height, shoot dry mass in each slice and the root system of Mombaca grass were evaluated. The applied rates of manganese resulted in increased accumulation of Mn in the plant, and there was an increase in dry mass of Mombaca grass, with maximum production, obtained from derivation, of 5.9 and 6.3 g plant(-1) for levels of 121 and 71 mg dm(-3) of Mn in the first and second cut respectively. The Mombaca grass has showed high manganese's tolerance, the critical level of toxicity was 841 mg kg(-1) in the second cut.
Resumo:
Zinc application methods can affect the nutrition and the initial development of the wheat. Thus, the aim of this work was to analyze the different ways of Zn application in the soil, on nutrition and on dry matter production. A completely randomized experimental design with four replications was used. The experiment was composed by the following Zn application treatments: control (no zinc application); soil incorporation, furrow located, seeds treatment and leaf pulverization. The experimental unit was composed of a pot filled with 7 L of soil. Morphological traits for each plant were determined on 52 days after emergence by the evaluations of plant height, internodes number, tillers number and aerial part dry matter. Still, the soil and plant chemical analysis was accomplished. The furrow located method provided larger concentrations of the micronutrient available. The zinc application methods did not influence the initial growth of the wheat plants. The zinc concentration in leaves was influenced by the different application methods, being the leaf pulverization the one that was caused the largest zinc accumulation on aerial part dry matter.