Shaping surface acoustic waves for cardiac tissue engineering

The heart is a non-regenerating organ that gradually suffers a loss of cardiac cells and functionality. Given the scarcity of organ donors and complications in existing medical implantation solutions, it is desired to engineer a three-dimensional architecture to successfully control the cardiac cells in vitro and yield true myocardial structures similar to native heart. This thesis investigates the synthesis of a biocompatible gelatin methacrylate hydrogel to promote growth of cardiac cells using biotechnology methodology: surface acoustic waves, to create cell sheets. Firstly, the synthesis of a photo-crosslinkable gelatin methacrylate (GelMA) hydrogel was investigated with different degree of methacrylation concentration. The porous matrix of the hydrogel should be biocompatible, allow cell-cell interaction and promote cell adhesion for growth through the porous network of matrix. The rheological properties, such as polymer concentration, ultraviolet exposure time, viscosity, elasticity and swelling characteristics of the hydrogel were investigated. In tissue engineering hydrogels have been used for embedding cells to mimic native microenvironments while controlling the mechanical properties. Gelatin methacrylate hydrogels have the advantage of allowing such control of mechanical properties in addition to easy compatibility with Lab-on-a-chip methodologies. Secondly in this thesis, standing surface acoustic waves were used to control the degree of movement of cells in the hydrogel and produce three-dimensional engineered scaffolds to investigate in-vitro studies of cardiac muscle electrophysiology and cardiac tissue engineering therapies for myocardial infarction. The acoustic waves were characterized on a piezoelectric substrate, lithium niobate that was micro-fabricated with slanted-finger interdigitated transducers for to generate waves at multiple wavelengths. This characterization successfully created three-dimensional micro-patterning of cells in the constructs through means of one- and two-dimensional non-invasive forces. The micro-patterning was controlled by tuning different input frequencies that allowed manipulation of the cells spatially without any pre- treatment of cells, hydrogel or substrate. This resulted in a synchronous heartbeat being produced in the hydrogel construct. To complement these mechanical forces, work in dielectrophoresis was conducted centred on a method to pattern micro-particles. Although manipulation of particles were shown, difficulties were encountered concerning the close proximity of particles and hydrogel to the microfabricated electrode arrays, dependence on conductivity of hydrogel and difficult manoeuvrability of scaffold from the surface of electrodes precluded measurements on cardiac cells. In addition, COMSOL Multiphysics software was used to investigate the mechanical and electrical forces theoretically acting on the cells. Thirdly, in this thesis the cardiac electrophysiology was investigated using immunostaining techniques to visualize the growth of sarcomeres and gap junctions that promote cell-cell interaction and excitation-contraction of heart muscles. The physiological response of beating of co-cultured cardiomyocytes and cardiac fibroblasts was observed in a synchronous and simultaneous manner closely mimicking the native cardiac impulses. Further investigations were carried out by mechanically stimulating the cells in the three-dimensional hydrogel using standing surface acoustic waves and comparing with traditional two-dimensional flat surface coated with fibronectin. The electrophysiological responses of the cells under the effect of the mechanical stimulations yielded a higher magnitude of contractility, action potential and calcium transient.

Marqueurs électrophysiologiques des dysfonctions attentionnelles et de leur récupération suite à un traumatisme craniocérébral léger

L’objectif principal de cette thèse était d’obtenir, via l’électrophysiologie cognitive, des indices de fonctionnement post-traumatisme craniocérébral léger (TCCL) pour différents niveaux de traitement de l’information, soit l’attention sélective, les processus décisionnels visuoattentionnels et les processus associés à l’exécution d’une réponse volontaire. L’hypothèse centrale était que les mécanismes de production des lésions de même que la pathophysiologie caractérisant le TCCL engendrent des dysfonctions visuoattentionnelles, du moins pendant la période aiguë suivant le TCCL (i.e. entre 1 et 3 mois post-accident), telles que mesurées à l’aide d’un nouveau paradigme électrophysiologique conçu à cet effet. Cette thèse présente deux articles qui décrivent le travail effectué afin de rencontrer ces objectifs et ainsi vérifier les hypothèses émises. Le premier article présente la démarche réalisée afin de créer une nouvelle tâche d’attention visuospatiale permettant d’obtenir les indices électrophysiologiques (amplitude, latence) et comportementaux (temps de réaction) liés aux processus de traitement visuel et attentionnel précoce (P1, N1, N2-nogo, P2, Ptc) à l’attention visuelle sélective (N2pc, SPCN) et aux processus décisionnels (P3b, P3a) chez un groupe de participants sains (i.e. sans atteinte neurologique). Le deuxième article présente l’étude des effets persistants d’un TCCL sur les fonctions visuoattentionelles via l’obtention des indices électrophysiologiques ciblés (amplitude, latence) et de données comportementales (temps de réaction à la tâche et résultats aux tests neuropsychologiques) chez deux cohortes d’individus TCCL symptomatiques, l’une en phase subaigüe (3 premiers mois post-accident), l’autre en phase chronique (6 mois à 1 an post-accident), en comparaison à un groupe de participants témoins sains. Les résultats des articles présentés dans cette thèse montrent qu’il a été possible de créer une tâche simple qui permet d’étudier de façon rapide et peu coûteuse les différents niveaux de traitement de l’information impliqués dans le déploiement de l’attention visuospatiale. Par la suite, l’utilisation de cette tâche auprès d’individus atteints d’un TCCL testés en phase sub-aiguë ou en phase chronique a permis d’objectiver des profils d’atteintes et de récupération différentiels pour chacune des composantes étudiées. En effet, alors que les composantes associées au traitement précoce de l’information visuelle (P1, N1, N2) étaient intactes, certaines composantes attentionnelles (P2) et cognitivo-attentionnelles (P3a, P3b) étaient altérées, suggérant une dysfonction au niveau des dynamiques spatio-temporelles de l’attention, de l’orientation de l’attention et de la mémoire de travail, à court et/ou à long terme après le TCCL, ceci en présence de déficits neuropsychologiques en phase subaiguë surtout et d’une symptomatologie post-TCCL persistante. Cette thèse souligne l’importance de développer des outils diagnostics sensibles et exhaustifs permettant d’objectiver les divers processus et sous-processus cognitifs susceptible d’être atteints après un TCCL.

Internship in arrhythmology

The arrhythmology focuses on the diagnosis and treatment of heart rhythm disorders and their complications, and has undergone a dramatic evolution over the past two decades. The widespread use of catheter ablation, the introduction of implantable cardioverter defibrillators for the prevention of sudden cardiac death and, finally, the development of cardiac resynchronization therapy led to a gradual loss of the impact of antiarrhythmic drugs as a therapeutic approach. This report was performed as a result of an internship performed in Cardiac Physiology with the duration of 400 hours. The main goal of the internship was to strengthen theoretical knowledge and acquire practical experience in the varied fields of arrhythmology, especially in the areas of Cardiac Pacing and Electrophysiology. During the internship were performed 41 electrophysiologic studies, where Atrioventricular Node Reentrant Tachycardia and Atrial Fibrillation were the most observed arrhythmias. New technologies such as three-dimensional mapping for electrophysiology studies are developing quickly and being use on a daily basis, as they prove to have safe and higher success rates. The proof is that in approximately half of the studies, one of the two mapping systems available, Carto or NavX, was used. In addition, were interrogated 283 pacemakers during the pacing clinics, being the dual chamber with DDD pacing mode the most encountered device. A large number of devices with Cardiac Resynchronization Therapy and/or Implantable Cardioverter Defibrillators were also observed. This report is divided into three chapters. Chapter I is constituted by a revision of the literature and includes concepts such as definition and mechanisms of cardiac arrhythmias; a brief description of the varied diagnostic tools and its recommendations; and a presentation of the different therapeutic approaches available and its indications. The second chapter is a descriptive drawing of the activity performed in the modules of Electrophysiology and Pacing. Lastly, the chapter III presents two clinical cases in Electrophysiology considered interesting from a clinical point of view.

Synthesis of innovative polyelectrolytes using monomers coming from renewable sources

240 p.

Charcot Marie Tooth disease (CMT4A) due to GDAP1 mutation: report of a colombian family

Background: Mutations of GDAP1 gene cause autosomal dominant and autosomal recessive Charcot-Marie-Tooth disease and more than 40 different mutations have been reported. The recessive Q163X mutation has been described in patients of Spanish ancestry, and a founder mutation in South American patients, originating in Spain has been demonstrated. Objective: We describe physical and histological features, and the molecular impact of mutation Q163X in a Colombian family. Methods: We report two female patients, daughters of consanguineous parents, with onset of symptoms within the first two years of life, developing severe functional impairment, without evidence of dysmorphic features, hoarseness or diaphragmatic paralysis. Electrophysiology tests showed a sensory and motor neuropathy with axonal pattern. Sequencing of GDAP1 gene was requested and the study identified a homozygous point mutation (c.487 C>T) in exon 4, resulting in a premature stop codon (p.Q163X). This result confirms the diagnosis of Charcot-Marie-Tooth disease, type 4A. Results: The patients were referred to Physical Medicine and Rehabilitation service, in order to be evaluated for ambulation assistance. They have been followed by Pulmonology service, for pulmonary function assessment and diaphragmatic paralysis evaluation. Genetic counseling was offered. The study of the genealogy of the patient, phenotypic features, and electrophysiological findings must be included as valuable tools in the clinical approach of the patient with Charcot-Marie-Tooth disease, in order to define a causative mutation. In patients of South American origin, the presence of GDAP1 gene mutations should be considered, especially the Q163X mutation, as the cause of CMT4A disease.

Charcot Marie Tooth disease (CMT4A) due to GDAP1 mutation: report of a colombian family

Background: Mutations of GDAP1 gene cause autosomal dominant and autosomal recessive Charcot-Marie-Tooth disease and more than 40 different mutations have been reported. The recessive Q163X mutation has been described in patients of Spanish ancestry, and a founder mutation in South American patients, originating in Spain has been demonstrated. Objective: we describe physical and histological features, and the molecular impact of mutation Q163X in a Colombian family. Methods: We report two female patients, daughters of consanguineous parents, with onset of symptoms within the first two years of life, developing severe functional impairment, without evidence of dysmorphic features, hoarseness or diaphragmatic paralysis. Electrophysiology tests showed a sensory and motor neuropathy with axonal pattern. Sequencing of GDAP1 gene was requested and the study identified a homozygous point mutation (c.487 C>T) in exon 4, resulting in a premature stop codon (p.Q163X). This result confirms the diagnosis of Charcot-Marie-Tooth disease, type 4A. Results: The patients were referred to Physical Medicine and Rehabilitation service, in order to be evaluated for ambulation assistance. They have been followed by Pulmonology service, for pulmonary function assessment and diaphragmatic paralysis evaluation. Genetic counseling was offered. The study of the genealogy of the patient, phenotypic features, and electrophysiological findings must be included as valuable tools in the clinical approach of the patient with Charcot-Marie-Tooth disease, in order to define a causative mutation. In patients of South American origin, the presence of GDAP1 gene mutations should be considered, especially the Q163X mutation, as the cause of CMT4A disease.

Fiber scaffolds of poly (glycerol-dodecanedioate) and its derivative via electrospinning for neural tissue engineering

Peripheral nerves have demonstrated the ability to bridge gaps of up to 6 mm. Peripheral Nerve System injury sites beyond this range need autograft or allograft surgery. Central Nerve System cells do not allow spontaneous regeneration due to the intrinsic environmental inhibition. Although stem cell therapy seems to be a promising approach towards nerve repair, it is essential to use the distinct three-dimensional architecture of a cell scaffold with proper biomolecule embedding in order to ensure that the local environment can be controlled well enough for growth and survival. Many approaches have been developed for the fabrication of 3D scaffolds, and more recently, fiber-based scaffolds produced via the electrospinning have been garnering increasing interest, as it offers the opportunity for control over fiber composition, as well as fiber mesh porosity using a relatively simple experimental setup. All these attributes make electrospun fibers a new class of promising scaffolds for neural tissue engineering. Therefore, the purpose of this doctoral study is to investigate the use of the novel material PGD and its derivative PGDF for obtaining fiber scaffolds using the electrospinning. The performance of these scaffolds, combined with neural lineage cells derived from ESCs, was evaluated by the dissolvability test, Raman spectroscopy, cell viability assay, real time PCR, Immunocytochemistry, extracellular electrophysiology, etc. The newly designed collector makes it possible to easily obtain fibers with adequate length and integrity. The utilization of a solvent like ethanol and water for electrospinning of fibrous scaffolds provides a potentially less toxic and more biocompatible fabrication method. Cell viability testing demonstrated that the addition of gelatin leads to significant improvement of cell proliferation on the scaffolds. Both real time PCR and Immunocytochemistry analysis indicated that motor neuron differentiation was achieved through the high motor neuron gene expression using the metabolites approach. The addition of Fumaric acid into fiber scaffolds further promoted the differentiation. Based on the results, this newly fabricated electrospun fiber scaffold, combined with neural lineage cells, provides a potential alternate strategy for nerve injury repair.^