Hardware timestamping for image acquisition system based on FlexRIO and IEEE 1588 v2 Standard

Current fusion devices consist of multiple diagnostics and hundreds or even thousands of signals. This situation forces on multiple occasions to use distributed data acquisition systems as the best approach. In this type of distributed systems, one of the most important issues is the synchronization between signals, so that it is possible to have a temporal correlation as accurate as possible between the acquired samples of all channels. In last decades, many fusion devices use different types of video cameras to provide inside views of the vessel during operations and to monitor plasma behavior. The synchronization between each video frame and the rest of the different signals acquired from any other diagnostics is essential in order to know correctly the plasma evolution, since it is possible to analyze jointly all the information having accurate knowledge of their temporal correlation. The developed system described in this paper allows timestamping image frames in a real-time acquisition and processing system using 1588 clock distribution. The system has been implemented using FPGA based devices together with a 1588 synchronized timing card (see Fig.1). The solution is based on a previous system [1] that allows image acquisition and real-time image processing based on PXIe technology. This architecture is fully compatible with the ITER Fast Controllers [2] and offers integration with EPICS to control and monitor the entire system. However, this set-up is not able to timestamp the frames acquired since the frame grabber module does not present any type of timing input (IRIG-B, GPS, PTP). To solve this lack, an IEEE1588 PXI timing device its used to provide an accurate way to synchronize distributed data acquisition systems using the Precision Time Protocol (PTP) IEEE 1588 2008 standard. This local timing device can be connected to a master clock device for global synchronization. The timing device has a buffer timestamp for each PXI trigger line and requires tha- a software application assigns each frame the corresponding timestamp. The previous action is critical and cannot be achieved if the frame rate is high. To solve this problem, it has been designed a solution that distributes the clock from the IEEE 1588 timing card to all FlexRIO devices [3]. This solution uses two PXI trigger lines that provide the capacity to assign timestamps to every frame acquired and register events by hardware in a deterministic way. The system provides a solution for timestamping frames to synchronize them with the rest of the different signals.

Diseño y construcción de una aplicación de soporte a la gestión académica de asignaturas

El objetivo fundamental del PFC desarrollado es el diseño y construcción de una aplicación web, que sirva de soporte a la gestión académica de asignaturas, basadas en un tipo de evaluación mixto, parte teórica y parte práctica, cada una formada por varías notas correspondientes a las diferentes pruebas realizadas, cada una de las cuales posee una ponderación. Permitiendo a los profesores de las asignaturas gestionar alumnos, profesores, grupos de teoría, grupos de prácticas, notas, fórmulas de ponderación, histórico y generar fichero con formato moodle. Además pueden realizar consultas, generar listados, consultar datos estadísticos tanto del curso académico actual, como de un curso académico previo almacenado en el histórico. La base de datos empleada es de tipo relacional y se ha utilizado el sistema gestor de bases de datos (DBMS) MySQLWorkbench 5.2 CE, impuesto por el cliente. Para la implementación de la aplicación se ha usado los lenguajes Java, JavaScript y HTML; por tratarse todos ellos de lenguajes de libre distribución. ABSTRACT The main objective of PFC developed is the design and construction of a web application that serves as support to academic subjects management, based on a type of mixed evaluation, theoretical and practical part, each consisting of several notes to different tests, each of which has a weighting. Allowing subject teachers manage students, teachers, group theory, practice groups, notes, weighting formulas, historical and generate Moodle file format. They can perform queries, generate lists, consult statistics of the current academic year or a previous academic year stored in the history. The database used is relational and has been used MySQLWorkbench CE 5.2 database management system (DBMS), imposed by the client. To implement the application has used the Java, HTML and JavaScript languages; because it is all free distribution languages.

Análise de incerteza de um sistema automatizado para ensaios de aspersores de irrigação

Ensaios de distribuição de água de aspersores são convencionalmente realizados manualmente, requerendo tempo e mão de obra treinada. A automação desses ensaios proporciona redução da demanda por esses recursos e apresenta potencial para minimizar falhas e/ou desvios de procedimento. Atualmente, laboratórios de ensaio e calibração acreditados junto a organismos legais devem apresentar em seus relatórios a incerteza de medição de seus instrumentos e sistemas de medição. Além disso, normas de ensaio e calibração apresentam especificação de incerteza aceitável, como a norma de ensaios de distribuição de água por aspersores, ISO 15886-3 (2012), a qual exige uma incerteza expandida de até 3% em 80% dos coletores. Os objetivos deste trabalho foram desenvolver um sistema automatizado para os ensaios de aspersores em laboratório e realizar a análise de incerteza de medição, para sua quantificação nos resultados de ensaio e para dar suporte ao dimensionamento dos tubos de coleta. O sistema automático foi constituído por um subsistema de gerenciamento, por meio de um aplicativo supervisório, um de pressurização e um de coleta, por meio de módulos eletrônicos microprocessados desenvolvidos. De acordo com instruções do sistema de gerenciamento o sistema de pressurização ajustava a pressão no aspersor por meio do controle da rotação da motobomba, e o sistema de coleta realizava a medição da intensidade de precipitação de água ao longo do raio de alcance do aspersor. A água captada por cada coletor drenava para um tubo de coleta, que estava conectado a uma das válvulas solenoides de um conjunto, onde havia um transmissor de pressão. Cada válvula era acionada individualmente numa sequência para a medição do nível de água em cada tubo de coleta, por meio do transmissor. Por meio das análises realizadas, as menores incertezas foram obtidas para os menores diâmetros de tubo de coleta, sendo que se deve utilizar o menor diâmetro possível. Quanto ao tempo de coleta, houve redução da incerteza de medição ao se aumentar a duração, devendo haver um tempo mínimo para se atingir a incerteza-alvo. Apesar de cada intensidade requer um tempo mínimo para garantir a incerteza, a diferença mínima de nível a ser medida foi a mesma. Portanto, para os ensaios visando atender a incerteza, realizou-se o monitoramento da diferença de nível nos tubos, ou diferença de nível, facilitando a realização do ensaio. Outra condição de ensaio considerou um tempo de coleta para 30 voltas do aspersor, também exigido pela norma ISO 15886-3 (2012). A terceira condição considerou 1 h de coleta, como tradicionalmente realizado. As curvas de distribuição de água obtidas por meio do sistema desenvolvido foram semelhantes às obtidas em ensaios convencionais, para as três situações avaliadas. Para tempos de coleta de 1 h ou 30 voltas do aspersor o sistema automático requereu menos tempo total de ensaio que o ensaio convencional. Entretanto, o sistema desenvolvido demandou mais tempo para atingir a incerteza-alvo, o que é uma limitação, mesmo sendo automatizado. De qualquer forma, o sistema necessitava apenas que um técnico informasse os parâmetros de ensaio e o acionasse, possibilitando que o mesmo alocasse seu tempo em outras atividades.

Suplementação luminosa no tomateiro cultivado em diferentes sistemas de condução em ambiente protegido

O auto sombreamento das folhas posicionadas nas porções inferiores do dossel de plantas pode limitar a produtividade em cultivos tutorados. Assim, a produtividade do tomateiro pode ser aumentada por meio da suplementação luminosa posicionada no interior do dossel, técnica conhecida como interlighting. O sistema de condução do tomateiro também interfere na distribuição da radiação solar, além de afetar os tratos culturais, a competição intra e entre plantas e a relação entre as partes vegetativas e reprodutivas. Desta forma, o objetivo deste trabalho foi avaliar a influência do sistema de condução de minitomate cultivar \'Sweet Grape\' em diferentes números de hastes por planta (duas, três e quatro hastes) e da suplementação luminosa com módulos de LED na produtividade e qualidade dos frutos, na eficiência do uso de água e nutrientes, além da morfologia das plantas e fatores relacionados ao manejo cultural, em ambiente protegido nas condições climáticas do sudeste brasileiro. Ao longo do ciclo de cultivo foram avaliados os seguintes parâmetros: volume irrigado, pH, condutividade elétrica, porcentagem e volume da solução drenada pelos vasos. As colheitas foram realizadas semanalmente, a partir de 90 dias após o transplante. Os frutos colhidos foram classificados, contados e pesados para a obtenção do número e massa de frutos grandes, médios, pequenos, comercial, não comercial e total. Amostras de frutos e tecidos foliares foram coletadas em cinco períodos e avaliadas quanto ao teor de sólidos solúveis, pH, acidez titulável e concentração de ácido ascórbico nos frutos e teor de nutrientes nas folhas. Além disso, ao final do ciclo cultural, foram realizadas as medições dos seguintes parâmetros morfológicos nas plantas: comprimento de hastes, número de cachos normais e bifurcados por hastes e diâmetro apical, mediano e basal das hastes. A suplementação luminosa apresentou aumento no número e na massa de frutos grandes e médios, elevando a produtividade total em 12%. Plantas com duas e três hastes apresentaram maior acúmulo de massa total de frutos, porém plantas com três hastes apresentaram maior massa de frutos não comerciais, com redução na massa de frutos comerciais. A maior eficiência no uso de água e nutrientes foi alcançada em plantas cultivadas com duas hastes. Plantas com quatro hastes demandaram mais solução nutritiva comparada às plantas com duas e três hastes. Esta maior demanda de solução, acarretou em aumento da condutividade elétrica da solução drenada. Plantas com quatro hastes apresentaram maiores teores de sólidos solúveis nos frutos. A suplementação luminosa também resultou em aumento do teor de sólidos solúveis e ligeiro aumento no teor de ácido ascórbico nos frutos. A suplementação luminosa favoreceu o acúmulo de nitrogênio, fósforo e potássio nas folhas do tomateiro. Desta forma, conclui-se que a suplementação luminosa é uma estratégia de manejo tecnicamente viável nas condições climática estudada. O sistema de condução de haste afeta a produtividade e qualidade dos frutos do tomateiro. Plantas com duas hastes além de apresentar maior produtividade de frutos comerciais, mostrou-se a estratégia mais eficiente no uso da água e nutrientes.

Conceptual Modelling of Complex Network Management Systems

Society, as we know it today, is completely dependent on computer networks, Internet and distributed systems, which place at our disposal the necessary services to perform our daily tasks. Moreover, and unconsciously, all services and distributed systems require network management systems. These systems allow us to, in general, maintain, manage, configure, scale, adapt, modify, edit, protect or improve the main distributed systems. Their role is secondary and is unknown and transparent to the users. They provide the necessary support to maintain the distributed systems whose services we use every day. If we don’t consider network management systems during the development stage of main distributed systems, then there could be serious consequences or even total failures in the development of the distributed systems. It is necessary, therefore, to consider the management of the systems within the design of distributed systems and systematize their conception to minimize the impact of the management of networks within the project of distributed systems. In this paper, we present a formalization method of the conceptual modelling for design of a network management system through the use of formal modelling tools, thus allowing from the definition of processes to identify those responsible for these. Finally we will propose a use case to design a conceptual model intrusion detection system in network.

Benefits of management systems integration: a literature review

The purpose of this paper is to identify the benefits of integrated management systems by comparing them with the benefits obtained through the individual implementation of ISO 9001 and ISO 14001 standards. The methodology used is a literature review based on an electronic search in the Web of Science, ScienceDirect, Scopus and Emerald databases. Findings show that although some benefits are common regardless the system management type, the benefits obtained with integration are greater than considering management systems separately because of the wider scope considered in integration. This is one of the first papers, to the best of our knowledge, to compare benefits from the two management systems standards when implemented separately and when integrated. In addition, some ideas are proposed for consideration in future research on the internalization of management systems and selection effect.

Hardware/software compatibility for traffic management/IVHS systems.

Texas Department of Transportation, Austin

Action research to explore perceptions of risk in project management

Uses research in a major UK company on the introduction of an electronic document management system to explore perceptions of, and attitudes to, risk. Phenomenological methods were used; with subsequent dialogue transcripts evaluated with Winmax dialogue software, using an adapted theoretical framework based upon an analysis of the literature. The paper identifies a number of factors, and builds a framework, that should support a greater understanding of risk assessment and project management by the academic community and practitioners.

Fragmented coherence: Solid waste management in Colombo

Notwithstanding the increasingly fragmented organizational relationships within Colombo's urban governance system, the cooperative nature of stakeholder relationships lends a high level of coherence to the overall system. Since 1995, Colombo's solid waste management system has been characterized by the increased role of the private sector, community-based organizations and NGOs. Whilst the increasingly fragmented nature of this system exhibits some deeply ingrained problems, there are also a number of positives associated with the increased role of civil society actors and, in particular, the informal sector. Reforming regulatory frameworks so as to integrate some of the social norms that are integral to the lives of the majority of urban residents will contribute to regulatory frameworks being considerably more enforceable than is currently the case. Such reform requires that institutional and regulatory frameworks need to be flexible enough to adapt to the changing social, political and economic context. In the Colombo case, effective cooperation between public sector and civil society stakeholders illustrates that adaptive institutional arrangements grounded in pragmatism are feasible. The challenge that arises is to translate these institutional arrangements into adaptive regulatory frameworks - something that would require a significant mind shift on the part of planners and urban managers.

Scalable location management for context-aware systems

Location information is commonly used in context-aware applications and pervasive systems. These applications and systems may require knowledge, of the location of users, devices and services. This paper presents a location management system able to gather, process and manage location information from a variety of physical and virtual location sensors. The system scales to the complexity of context-aware applications, to a variety of types and large number of location sensors and clients, and to geographical size of the system. The proposed location management system provides conflict resolution of location information and mechanisms to ensure privacy.

Knowledge management applied to enterprise risk management

Risk and knowledge are two concepts and components of business management which have so far been studied almost independently. This is especially true where risk management (RM) is conceived mainly in financial terms, as for example, in the financial institutions sector. Financial institutions are affected by internal and external changes with the consequent accommodation to new business models, new regulations and new global competition that includes new big players. These changes induce financial institutions to develop different methodologies for managing risk, such as the enterprise risk management (ERM) approach, in order to adopt a holistic view of risk management and, consequently, to deal with different types of risk, levels of risk appetite, and policies in risk management. However, the methodologies for analysing risk do not explicitly include knowledge management (KM). This research examines the potential relationships between KM and two RM concepts: perceived quality of risk control and perceived value of ERM. To fulfill the objective of identifying how KM concepts can have a positive influence on some RM concepts, a literature review of KM and its processes and RM and its processes was performed. From this literature review eight hypotheses were analysed using a classification into people, process and technology variables. The data for this research was gathered from a survey applied to risk management employees in financial institutions and 121 answers were analysed. The analysis of the data was based on multivariate techniques, more specifically stepwise regression analysis. The results showed that the perceived quality of risk control is significantly associated with the variables: perceived quality of risk knowledge sharing, perceived quality of communication among people, web channel functionality, and risk management information system functionality. However, the relationships of the KM variables to the perceived value of ERM are not identified because of the low performance of the models describing these relationships. The analysis reveals important insights into the potential KM support to RM such as: the better adoption of KM people and technology actions, the better the perceived quality of risk control. Equally, the results suggest that the quality of risk control and the benefits of ERM follow different patterns given that there is no correlation between both concepts and the distinct influence of the KM variables in each concept. The ERM scenario is different from that of risk control because ERM, as an answer to RM failures and adaptation to new regulation in financial institutions, has led organizations to adopt new processes, technologies, and governance models. Thus, the search for factors influencing the perceived value of ERM implementation needs additional analysis because what is improved in RM processes individually is not having the same effect on the perceived value of ERM. Based on these model results and the literature review the basis of the ERKMAS (Enterprise Risk Knowledge Management System) is presented.

Brilliant mistake! Essays on incidents of management mistakes and mea culpa

Purpose – The purpose of this paper is to examine students’ perceptions of managerial mistakes and why (and why not) managers admit mistakes. Design/methodology/approach – This paper provides a reflective account of how students’ perceive management mistakes and deal with admitting “mea culpa” – “I am to blame”. Findings – The findings show a range of attitudes: they highlight the intermingling pressures associated with the cultural environment and mistakes; they identify media characteristics and its influences on mistakes and mea culpa; they highlight ceremonial processes and tasks that shape and influence the declaration of mea culpa; and they identify how the psychology and sociology of mistakes confronts and affects students. Taken together, the study highlights the varying degrees of wariness that is carried forward by the students from vicariously learning about management mistakes. Originality/value – This paper links up with recent discussions on retail failure and retail pedagogy. It is hoped that this paper will encourage more academics to address, and engage with, management mistakes creatively in their teaching.

Strategic and operational risk in an international collaboration agency: a knowledge management solution

The International Cooperation Agency (identified in this article as IDEA) working in Colombia is one of the most important in Colombian society with programs that support gender rights, human rights, justice and peace, scholarships, aboriginal population, youth, afro descendants population, economic development in communities, and environmental development. The identified problem is based on the diversified offer of services, collaboration and social intervention which requires diverse groups of people with multiple agendas, ways to support their mandates, disciplines, and professional competences. Knowledge creation and the growth and sustainability of the organization can be in danger because of a silo culture and the resulting reduced leverage of the separate group capabilities. Organizational memory is generally formed by the tacit knowledge of the organization members, given the value of accumulated experience that this kind of social work implies. Its loss is therefore a strategic and operational risk when most problem interventions rely on direct work in the socio-economic field and living real experiences with communities. The knowledge management solution presented in this article starts first, with the identification of the people and groups concerned and the creation of a knowledge map as a means to strengthen the ties between organizational members; second, by introducing a content management system designed to support the documentation process and knowledge sharing process; and third, introducing a methodology for the adaptation of a Balanced Scorecard based on the knowledge management processes. These three main steps lead to a knowledge management “solution” that has been implemented in the organization, comprising three components: a knowledge management system, training support and promotion of cultural change.

Rules for mapping a conceptual model onto various data base management systems. Available in 2 volumes.

The design and implementation of data bases involve, firstly, the formulation of a conceptual data model by systematic analysis of the structure and information requirements of the organisation for which the system is being designed; secondly, the logical mapping of this conceptual model onto the data structure of the target data base management system (DBMS); and thirdly, the physical mapping of this structured model into storage structures of the target DBMS. The accuracy of both the logical and physical mapping determine the performance of the resulting systems. This thesis describes research which develops software tools to facilitate the implementation of data bases. A conceptual model describing the information structure of a hospital is derived using the Entity-Relationship (E-R) approach and this model forms the basis for mapping onto the logical model. Rules are derived for automatically mapping the conceptual model onto relational and CODASYL types of data structures. Further algorithms are developed for partly automating the implementation of these models onto INGRES, MIMER and VAX-11 DBMS.

Planning and implementing safety management systems

This thesis describes a study of the content and applicability of BS8800:1996 Guide to occupational health and safety management systems. The research is presented chronologically, with literature review and content analysis of SMS related guides and standards interwoven with two elements of qualitative empirical work. The first of these was carried out shortly after publication of BS8800 in 1996, a 'before-the-event' investigation of how organisations were intending to approach SMS implementation. The challenges faced by these organisations are reviewed against standard management theory, suggesting that the initial motivation for SMS implementation governs the approach organisations will adopt to guidance such as BS8800. The second phase of empirical work was undertaken in the context of OHSAS 18001, an auditable protocol based on BS8800, which allows organisations to certify their safety management systems. A discussion of the evolution of certifiable safety management system is presented, highlighting the similarities and differences between this, BS8800, SMS and wider management system standards. A case study then reviews the experiences of a catering company that implemented 18001, motivated by the opportunity for certification as a business benefit. The empirical work is used to comment on the guidance provided by BS8800, within its evolved role as guidance organisations may use for implementation of a SMS to be certified according to the specifications of OHSAS 18001. It is suggested that optimal implementation is facilitated by initial status review, continual improvement and the use of annexes, where there are used to make changes to the existing safety management system. This thesis concludes with a discussion of these elements, highlighting pertinent areas within BS8800 where revision or amendment may be appropriate.