The bacteriology of oil sardine (Sardinella longiceps) and mackerel (Rastrelliger kanagurta) from tropical waters off Cochin. 2. Qualitative aspects

80% of the flora of skin, gills and intestines of oil sardine and mackerel at isolation temperature 28 ± 2°C consisted of Gram negative asporogenous rods or cocci, belonging to the genera Vibrio, Pseudomonas, Moraxella, Acinetobacter and Flavobacteria/Cytophaga. Nearly 10% of the flora was constituted by Gram positives, Micrococcus and Arthrobacter. Incubation temperature of 36 ± 1°C recovered more Vibrio spp. and Gram positives, while at lower temperatures of 8 ± 1°C and 1 ± 1°C, more Pseudomonas, Acinetobacter and Moraxella spp. were recovered. Significant changes with respect to season were observed in the relative distribution of different genera.

Efficiency of two designs of trawls in Hirakud Reservoir

High opening trawl was found to be effective for the exploitation of bottom and off bottom fishes from Hirakud reservoir compared to bulged belly trawl.

Extent of trial of improved designs of lobster traps

The mean extent of trial of an improved design of lobster trap by 45 fishermen was 26.46. The cost of local traps and number of seasons used were both significantly negatively associated with the extent of trials; its relationship with the annual catch by indigenous trap approached significance. These three variables accounted for 59% of the variance in the extent of trial.

Adoption of CIFT fishing boat designs

Information about the adoption of CIFT fishing boat designs was collected from 54 boat building yards of the country. The majority of the boats were built as per CIFT designs. The types of wood used and the designs were dependent upon each other. Other variables studied did not show significant effects upon the type of adoption. The CIFT designs were modified at some yards and these details are discussed.

Novel designs for Penning ion traps

A number of alternative designs are presented for Penning ion traps suitable for quantum information processing (QIP) applications with atomic ions. The first trap design is a simple array of long straight wires, which allows easy optical access. A prototype of this trap has been built to trap Ca+ and a simple electronic detection scheme has been employed to demonstrate the operation of the trap. Another trap design consists of a conducting plate with a hole in it situated above a continuous conducting plane. The final trap design is based on an array of pad electrodes. Although this trap design lacks the open geometry of the other traps described above, the pad design may prove useful in a hybrid scheme in which information processing and qubit storage take place in different types of trap. The behaviour of the pad traps is simulated numerically and techniques for moving ions rapidly between traps are discussed. Future experiments with these various designs are discussed. All of the designs lend themselves to the construction of multiple trap arrays, as required for scalable ion trap QIP.

Selection and application of a suitable sampling method for quantitative and qualitative evaluation of lab-lab

Milkfish and prawn pond operation in the Philippines is often associated with lab-lab culture. Lab-lab is a biological complex of blue-green algae, diatoms, bacteria and various animals which form a mat at the bottom of nursery ponds or floating patches along the margins of ponds. This complex is considered the most favorable food of milkfish in brackishwater ponds. Variations in the quantity and quality of lab-lab between and within areas of a 1,000 sq. m. pond was determined over 2 culture periods (6 month duration) and the applicability and suitability of stratified random sampling as a method of sampling lab-lab was evaluated.

Preliminary evaluation of conceptual mechanical designs

Computational Design has traditionally required a great deal of geometrical and parametric data. This data can only be supplied at stages later than conceptual design, typically the detail stage, and design quality is given by some absolute fitness function. On the other hand, design evaluation offers a relative measure of design quality that requires only a sparse representation. Quality, in this case, is a measure of how well a design will complete its task.

The research intends to address the question: "Is it possible to evaluate a mechanical design at the conceptual design phase and be able to make some prediction of its quality?" Quality can be interpreted as success in the marketplace, success in performing the required task, or some other user requirement. This work aims to determine a minimum level of representation such that conceptual designs can be usefully evaluated without needing to capture detailed geometry. This representation will form the model for the conceptual designs that are being considered for evaluation. The method to be developed will be a case-based evaluation system, that uses a database of previous designs to support design exploration. The method will not be able to support novel design as case-based design implies the model topology must be fixed.

Designing for resilience: Using a Delphi study to identify resilience issues for hospital designs in a changing climate

Hospitals are facing a triple challenge - meeting mandatory climate change targets and refurbishing aging infrastructure while simultaneously providing quality of care. With the potential of more frequent disruptive weather events, a UK government-funded project was launched in 2009 to investigate practical strategies for the National Health Service to increase its resilience to climate change. This paper presents the process of defining resilience by using the Delphi method and demonstrates its applicability within healthcare design. A Delphi survey is nearing completion which has determined the significant resilience issues and temperature ranges for ideal and critical conditions. Our preliminary findings identified six priorities that lead towards increasing resilience. Using the Delphi method can be a useful tool in clarifying the focus for healthcare design considerations. Copyright © 2002-2012 The Design Society. All rights reserved.

Dynamic earth pressures and earth pressure cell measurements

Failure of retaining walls is observed after many recent seismic events. Design of these walls are based on the pseudo-static force designs based on the Mononobe-Okabe earth pressure coefficient equations. However, it is clear that there are limitations attached with this approach. This paper investigates the seismic behaviour of sheet pile retaining walls using dynamic centrifuge testing facilities. In addition to using bending moment strain gauges on the wall, new generation earth pressure cells have also been used to investigate the generation of active and passive earth pressures. The results indicate that Mononobe-Okabe equations give relatively good estimates of active earth pressures but may be over-predicting passive earth pressures at certain peak ground acceleration levels. Based on this series of centrifuge tests it is concluded that earth pressure cells are successful in providing good qualitative data, but need to be supplemented by good calibration methods. © 2010 Taylor & Francis Group, London.

Blade Loading and Its Application in the Mean-Line Design of Low Pressure Turbines

In order to minimize the number of iterations to a turbine design, reasonable choices of the key parameters must be made at the preliminary design stage. The choice of blade loading is of particular concern in the low pressure (LP) turbine of civil aero engines, where the use of high-lift blades is widespread. This paper considers how blade loading should be measured, compares the performance of various loss correlations, and explores the impact of blade lift on performance and lapse rates. To these ends, an analytical design study is presented for a repeating-stage, axial-flow LP turbine. It is demonstrated that the long-established Zweifel lift coefficient (Zweifel, 1945, "The Spacing of Turbomachine Blading, Especially with Large Angular Deflection" Brown Boveri Rev., 32(1), pp. 436-444) is flawed because it does not account for the blade camber. As a result the Zweifel coefficient is only meaningful for a fixed set of flow angles and cannot be used as an absolute measure of blade loading. A lift coefficient based on circulation is instead proposed that accounts for the blade curvature and is independent of the flow angles. Various existing profile and secondary loss correlations are examined for their suitability to preliminary design. A largely qualitative comparison demonstrates that the loss correlations based on Ainley and Mathieson (Ainley and Mathieson, 1957, "A Method of Performance Estimation for Axial-Flow Turbines," ARC Reports and Memoranda No. 2974; Dunham and Came, 1970, "Improvements to the Ainley-Mathieson Method of Turbine Performance Prediction," Trans. ASME: J. Eng. Gas Turbines Power, July, pp. 252-256; Kacker and Okapuu, 1982, "A Mean Line Performance Method for Axial Flow Turbine Efficiency," J. Eng. Power, 104, pp. 111-119). are not realistic, while the profile loss model of Coull and Hodson (Coull and Hodson, 2011, "Predicting the Profile Loss of High-Lift Low Pressure Turbines," J. Turbomach., 134(2), pp. 021002) and the secondary loss model of (Traupel, W, 1977, Thermische Turbomaschinen, Springer-Verlag, Berlin) are arguably the most reasonable. A quantitative comparison with multistage rig data indicates that, together, these methods over-predict lapse rates by around 30%, highlighting the need for improved loss models and a better understanding of the multistage environment. By examining the influence of blade lift across the Smith efficiency chart, the analysis demonstrates that designs with higher flow turning will tend to be less sensitive to increases in blade loading. © 2013 American Society of Mechanical Engineers.