Effect of Calcium Pre-rinse and Fluoride Dentifrice on Enamel and on Dental Plaque Formed In Situ

Purpose: The aim of this in situ double-blind randomised crossover study was to investigate the effect of calcium (Ca) pre-rinse on the composition of plaque and on enamel prior to the use of fluoride (F) dentifrice. Materials and Methods: During four phases (14 days each) of this study, 10 volunteers had agreed to wear dental appliances containing two healthy bovine enamel blocks. A fresh solution containing 20% weight/volume (w/v) sucrose was dripped on the enamel blocks ex vivo for 5 min three times a day. Subsequently, the appliances were replaced in the mouth, and the volunteers rinsed their mouth with 10 mL of a Ca (150 mmol/L) or a placebo rinse (1 min). In sequence, a slurry (1:3 w/v) of F (1030 ppm) or placebo dentifrice was dripped onto the blocks ex vivo for 1 min. During this time, the volunteers brushed their teeth with the respective dentifrice. The appliances were replaced in the mouth, and the volunteers rinsed their mouth with water. The plaque formed on the blocks was analysed for F and Ca. The enamel demineralisation as well as the incorporation of F on enamel was evaluated by cross-sectional microhardness and alkali-soluble F analysis, respectively. Data were tested using analysis of variance (P < 0.05). Results: The Ca pre-rinse prior to the use of the F dentifrice led to a three- and sixfold increase in the plaque F and Ca concentrations, respectively. It also did not have any additive effect on the F content on the enamel and the demineralisation of the enamel, in comparison with the use of F dentifrice alone. Conclusions: A Ca lactate rinse used prior to the F dentifrice was able to change the mineral content in the plaque, but it was unable to prevent enamel demineralisation.

A simple and sensitive detection of diquat herbicide using a dental amalgam electrode A comparison using the chromatographic technique

This paper describes the use of a dental amalgam electrode (DAE) to evaluate the electrochemical behaviour and to develop an electroanalytical procedure for determination of diquat herbicide in natural water and potato samples. The work was based on the square wave voltammetry responses of diquat, which presented two well-defined and reversible reduction peaks, at -0.56 V (peak 1) and -1.00V (peak 2). The experimental and voltammetric parameters were optimised, and the analytical curves were constructed and compared to similar curves performed by high performance liquid chromatography coupled to ultraviolet-visible spectrophotometric detector (HPLC/UV-vis). The responses were directly proportional to diquat concentration in a large interval of concentration, and the calculated detection limits were very similar, around 10 mu g L(-1) (10 ppb) for voltammetric and chromatographic experiments. These values were lower than the maximum residue limit established for natural water by the Brazilian Environmental Agency. The recovery percentages in pure electrolyte, natural water and potato samples showed values from 70% to 130%, demonstrating that the voltammetric methodology proposed is suitable for determining any contamination by diquat in different samples, minimising the toxic residues due to the use of liquid mercury or the adsorptive process relative to use of other solid surfaces. (C) 2009 Published by Elsevier B.V.

Evaluation of the light polymerization efficiency of copolymers used in dental formulations by differential scanning calorimetry

Different compositions of visible-light-curable triethylene glycol dimethacrylate/bisglycidyl methacrylate copolymers used in dental resin formulations were prepared through copolymerization photoinitiated by a camphorquinone/ethyl 4-dimethylaminobenzoate system irradiated with an Ultrablue IS light-emitting diode. The obtained copolymers were evaluated with differential scanning calorimetry. From the data for the heat of polymerization, before and after light exposure, obtained from exothermic differential scanning calorimetry curves, the light polymerization efficiency or degree of conversion of double bonds was calculated. The glass-transition temperature also was determined before and after photopolymerization. After the photopolymerization, the glass-transi-tion temperature was not well defined because of the breadth of the transition region associated with the properties of the photocured dimethacrylate. The glass-transition temperature after photopolymerization was determined experimentally and compared with the values determined with the Fox equation. In all mixtures, the experimental value was lower than the calculated value. Scanning electron microscopy was used to analyze the morphological differences in the prepared copolymer structures. (C) 2007 Wiley Periodicals, Inc.

Evaluation of Postpolymerization as a Function of the Storage Time of Triethylene Glycol Dimethacrylate/2,2-Bis[4-(2-Hydroxy-3-Methacryloxy-Prop-1-Oxy)-Phenyl]-propane Bisphenyl-alpha-Glycidyl Ether Dimethacrylate Copolymers Used in Dental Resins by Differential Scanning Calorimetry and Dynamic Mechanical Analysis

The aim of this work was to evaluate the effect of the storage time on the thermal properties of triethylene glycol dimethacrylate/2,2-bis[4-(2-hydroxy-3-methacryloxy-prop-1-oxy)-phenyl]propane bisphenyl-alpha-glycidyl ether dimethacrylate (TB) copolymers used in formulations of dental resins after photopolymerization. The TB copolymers were prepared by photopolymerization with an Ultrablue IS light-emitting diode, stored in the dark for 160 days at 37 degrees C, and characterized with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and Fourier transform infrared spectroscopy with attenuated total reflection. DSC curves indicated the presence of an exothermic peak, confirming that the reaction was not completed during the photopolymerization process. This exothermic peak became smaller as a function of the storage time and was shifted at higher temperatures. In DMA studies, a plot of the loss tangent versus the temperature initially showed the presence of two well-defined peaks. The presence of both peaks confirmed the presence of residual monomers that were not converted during the photopolymerization process. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 679-684, 2009

Desenvolvimento de célula de carga para medir força aplicada durante a escovação dental

Este trabalho apresenta o desenvolvimento de um sistema de medição para a análise biomecânica da força desenvolvida durante a escovação dental, com aquisição e processamento de dados de dinamometria para a análise da escovação dental como um processo eficaz de higiene bucal. Foi desenvolvida uma célula de carga com extensômetros de resistência elétrica, montada em uma escova dental. A célula de carga foi construída com 2 Strain Gages montados em meia ponte de Wheatstone, medindo força em flexão, e 4 Strain Gages montados em ponte completa de Wheatstone medindo força de torque. A aquisição dos dados e análise foi feita através do software SAD2. Foram selecionados 6 indivíduos, dois do sexo masculino e 4 do sexo feminino, todos destros, e instruídos a escovarem os dentes por 1 minuto. Os valores medidos para a força de flexão média variam de 24gf à 526gf e para o esforço de torque médio de –76gfmm à 1890gfmm. A célula de carga desenvolvida mostrou-se repetitiva, com boa sensibilidade e confiável com um erro em flexão de 2,7% e 5,5% em torque. A célula de carga apresentou resultados semelhantes a de outros trabalhos publicados anteriormente, sendo estes válidos para uma análise quantitativa inicial no processo de escovação.

Barreiras a entrada : o caso do setor de creme dental brasileiro

Ao se estudar as consequências sobre o bem-estar social de um mercado relevante onde há elevada concentração na produção, deve-se identificar, primeiramente, se a competição potencial existe. Uma forma de detecta-la seria através do exame das barreiras à entrada da concorrência no mercado relevante em estudo. O objetivo deste artigo é avaliar, no setor brasileiro de creme dental, as barreiras para firmas: entrarem ou; aumentarem sua participação de mercado. A motivação para este estudo decorre da mudança na estrutura deste mercado relevante, uma vez que, em janeiro de 1995, a Colgate, empresa com a segunda maior fatia do mercado nacional, adquiriu a Kolynos, firma detentora de metade do faturamento brasileiro deste setor.

William Gaddis's aesthetics of recognitions

William Gaddis’s The Recognitions (1955) is a selfreflexive novel that portrays Wyatt Gwyon’s trajectory from childhood to maturity, as he rejects and searches for originality. The present work bestows an analysis of William Gaddis’s The Recognitions focusing on the problematization of originality and authorship proposed by the novel by means of the central issues of forgery and plagiarism, which bring with them two larger and more important sister-notions: authorship and originality. The novel questions the prevailing demand for originality and discusses the possibility of being original. It formulates an aesthetics of recognitions defended in the novel and used by the author in the making of this text. In order to do that, this work provides a view on the different concepts associated with the terms originality and original, as well as some of the main infringements related to them in contemporary society. It also offers an account of the development of the concepts of originality and authorship in Western society, showing the growing importance of the figure of the author and the parallel development of the concepts of plagiarism and copyright. The next three chapters are dedicated to attempt to provide an account of William Gaddis’s The Recognitions focusing on the main artist characters and an analysis of the novel in the light of the theoretical and historical background provided. The first of these chapters focuses on Wyatt’s trajectory and his visions of art. The second identifies and analyses Wyatt’s mirrors in the narrative, which reinforce the self-reflective structure of the novel. And the third chapter exemplifies and analyses Wyatt’s aesthetics of recognitions, which turns out to be Gaddis’s own aesthetics in the making of his fiction.

Placas maxilo-dentárias em Rincossauros Hyperodapedon Huxley, 1859. Histologia e morfogênese maxilo-dental: nova abordagem.

O estudo das estruturas da placas maxilo-dentárias dos rincossauros Hyperodapedon Huxley, 1859, do Triássico da Formação Santa Maria, em nova abordagem histológica e ontogênica resultou na identificação da natureza do esmalte aprismático verdadeiro, de variados elementos histológicos dentinários e osteológicos, e de um centro de ossificação periosteal primário. Também foram encontradas evidências histológicas dos mecanismos de fusionamento maxilo-dentinário e amelo-maxilar. Com estes elementos, inferimos os modelos de organogênese dental, da ontogênese maxilar e dos mecanismos de fusionamento maxilodental. Encontrou-se uma singular e raríssima coroa dental, imatura e ainda não erupcionada, na região posterior da placa dental e assim evidenciou-se a correta posição da margem odontogenicamente ativa. Adicionalmente inferiu-se a localização da posição da lâmina dentária embrionária. Constatou-se a não formação de alvéolos dentários, de cemento radicular e do espaço necessário à formação do ligamento periodontal e, assim, se deduziu a não formação do folículo dental embriônico. As presenças de especiais elementos anatômicos e histológicos nos tecidos ósseos periapicais evidenciam o crescimento radicular contínuo, enquanto a forma e o fusionamento radicular imediato depõe a favor de uma função dentária fisiológica diferenciada para as baterias dentárias maxilares dos Rincossauros do gênero Hyperodapedon. Os mecanismos que possibilitaram o controle embriônico para a deposição das lamelas de tecido ósseo coronal e seu preciso fusionamento sobre o esmalte dentário, declinam por modificações nas funções tardias do órgão reduzido do esmalte e pela presença de uma membrana oral com funções osteogênicas e também protetivas, situada nas porções posteriores da placa maxilo-dentária em desenvolvimento. Mudanças heterocrônicas no tempo de diferenciação das células da crista neural embriônica e em seus derivados, como a lâmina dentária e órgãos dentários embrionários ou correlacionadas com a organogênese das placas maxilo-dentárias e seus anexos periodontais, todos como condições plesiomórficas para Diápsidas Triássicos, poderiam ser as causas responsáveis pela origem e evolução deste estranho aparelho estomatognático nos clados de Hyperodapedon sp..

Efeito de diferentes posologias do verniz de clorexidina a 1% nos níveis de estreptococos do grupo mutans na saliva e no biofilme dental

Não há concordância em relação ao número total e intervalo entre as aplicações do verniz de clorexidina (CLX) a 1%. Além disso, os resultados quanto ao período de redução dos níveis de estreptococos do grupo mutans (EGM) na saliva ou biofilme dental são controversos. O objetivo do presente trabalho foi avaliar, através de um estudo clínico randomizado e controlado, o efeito de diferentes posologias do verniz de CLX a 1% nos níveis de EGM. Pacientes com níveis de EGM ≥ 105 UFC/ml saliva, 11-16 anos, foram distribuídos em 4 grupos: grupo A (n=14): 1 aplicação do verniz de CLX; grupo B (n=14): 1 aplicação diária do verniz CLX, em 3 dias consecutivos; grupo C (n=15): 3 aplicações do verniz CLX com intervalo de 4 dias entre cada aplicação; grupo D (n=12): 1 aplicação diária do verniz placebo, em 3 dias consecutivos. Amostras de saliva e biofilme dental foram coletadas no início do estudo e 1, 4 e 8 semanas após o término das aplicações e foram cultivadas para avaliação dos níveis de EGM e bactérias totais. Os dados foram avaliados através do teste ANOVA (medidas repetidas) e teste de Tukey. Após 1 semana, observou-se uma leve redução nos níveis salivares de EGM nos grupos A, B e C (-0,70; -0,90; -0,41 log10 UFC/ml saliva; respectivamente), significativa somente nos grupos A e B (p < 0,05). Não foram observadas diferenças nos níveis salivares de EGM entre os grupos experimentais nos diferentes períodos do experimento. No biofilme dental, 1 semana após o término do tratamento, foi observado um aumento significativo nos níveis de bactérias totais em todos os grupos experimentais e uma redução significativa nos níveis de EGM apenas no grupo A. O verniz de CLX a 1% resultou em uma leve e curta redução nos níveis de EGM. Este estudo demonstrou que repetidas aplicações do verniz de clorexidina a 1% não aumentam o seu efeito na redução dos níveis de EGM.

Caracterização Microestrutural e Tribocorrosiva de Sistemas Metalocerâmicos Odontológicos do Tipo Ni-Cr/Porcelana E Ni-Cr/Ti/Porcelana

The partial fixed prosthodontics restoration is used to rehabilitate form and function of partial or total compromised teeth, having to remain permanently joined to remainder tooth. The most useful material on prosthodontics is the feldspar porcelain, commercialized as aluminosilicate powders. Dental porcelains are presented with limited mechanical properties to rehabilitate extensive spaces. The association with Ni-Cr metallic systems (metal-ceramic system) allows that the metallic substructure compensates the fragile porcelain nature, preserving the thermal insulation and aesthetics desirable, as well as reducing the possibility of cracking during matication efforts. Cohesive flaws by low mechanical strength connect the metallic substructure to the oral environment, characterized by a electrolytic solution (saliva), by aggressive temperature, pH cyclic changes and mechanical requests. This process results on ionic liberation that could promote allergic or inflammatory responses, and/or clinical degradation of ceramometal system. The aim of this study was to evaluate the presence of an intermediate titanium layer on the microscopic fracture behavior of porcelains on ceramometal systems. Plasma deposition of titanium films result in regular passivating oxide layers which act as barriers to protect the metallic substrate against the hazardous effects of corrosive saliva. Tribocorrosion tests were performed to simulate the oral environment and mechanical stress, making it possible the early detection of crack formation and growth on metal-ceramic systems, which estimate the adherence between the compounds of this system. Plain samples consisting of dental feldspar porcelain deposited either onto metallic substrates or titanium films were fired and characterized by scanning electron microscopy. The result showed that the titanium film improved the adherence of the system compared to conventional metal-ceramic interfaces, thus holding crack propagation

Novos monômeros obtidos a partir do metacrilato de glicidila, bisfenol A e 4, 4 isopropilidenodicicloexanol : síntese, caracterização estrutural e propriedades de compósitos para utilização em resinas de restauração dental

Nowadays, composite resins are the direct restorative materials more important in dental clinical performance, due to their versatility and aesthetic excellence. Bis-GMA (2,2-bis[4(2-hydroxy-3-metacryloxypropoxy)phenil]propane) is the base monomer more frequently used in restorative composite resins. However, this monomer presents some disadvantages, such as high viscosity and two aromatic rings in its structure that can promote allergic reactions to the humans. In this work, the main purpose was to synthesize new monomers from glycidyl methacrylate to use in dental restorative materials. Structural characterization of the monomers was carried out through FTIR and NMR 1H, and eight composites were produced from the new monomers, by addition of silane-treated alumino silicate particles (inorganic filler) and a photocuring system (camphorquinone and ethyl 4-dimethylaminebenzoate). The composites were analyzed by environmental scanning electronic microscopy and the water sorption and solubility, compressive strength and elastic modulus were determined. A commercial composite resin [Z100 (3M)] was used to comparison effect. The new composites presented general characteristics similar to the commercial ones; however, they didn t present the properties expected. This behavior was attributed to the lower degree of monomer reaction and to the granulometry and size distribution of the mineral filler in the polymeric matrix