Estrabismo: detecção em uma amostra populacional e fatores demográficos associados

OBJETIVOS: Identificar a frequência de ocorrência de desvios oculares e as características dos portadores em uma amostra populacional. MÉTODOS: Estudo transversal, observacional e probabilístico, entre os anos de 2004 e 2005, envolvendo 11 cidades da região centro-oeste do estado de São Paulo. Foram examinados 10.994 indivíduos, sendo utilizada para este estudo uma subamostra desta população, identificada pelo diagnóstico de estrabismo. A população foi abordada por uma equipe treinada e padronizada para os procedimentos da pesquisa. Os dados foram analisados estatisticamente por meio de análise descritiva, frequência de ocorrência, análise de contingência e testes de associação (p<0,05). RESULTADOS: A frequência de ocorrência de estrabismo na população estudada foi de 1,4% (148 portadores de estrabismo), sem diferença entre sexos. Portadores de esodesvios (ET) eram 46,3%, 38,2% casos de exodesvio (XT) e 15,4% de desvios verticais associados a horizontais ou síndromes. A análise de contingência mostrou que 3 indivíduos (2,3%) estrábicos apresentavam cegueira e 7 (5,43%) apresentavam baixa visão em um dos olhos. Tanto a ET, quanto a XT estiveram presentes em indivíduos com graus variáveis de miopia (até -5,75 para XT e -2,50 para ET) e de hipermetropia (até +9,00 para XT e +8,00 para ET). A associação entre estrabismo e o equivalente esférico obtido na refração estática não mostrou diferença significativa (p>0,05). CONCLUSÃO: A frequência de ocorrência de estrabismo em uma amostra populacional foi de 1,4%, sem diferença entre sexos ou tipo de desvio ocular. A presença de cegueira e de baixa visão associadas aos desvios oculares reforçam a necessidade de tratamento precoce.

Production performance and egg quality of quails (Coturnix japonica) during several periods of the day

Three experiments were carried out to analyze the performance and egg quality of Japanese quails throughout the day when submitted to different lighting programs. In each experiment, birds were submitted to a period of 28 days for adaptation to the lighting program. During the following three days, each day - from 7 am to 7 pm or 9 pm - was divided into six or seven periods of two hours each, and the remaining hours corresponded to another single period. All birds were submitted to the same management practices, and received water and feed ad libitum. The experimental diet was formulated according to NRC (1994) standards. It was observed lower feed intake in the period of 9 pm to 7 am, and a higher incidence of lay from 3 pm to 7 pm, as opposite to hens, which peak of egg laying occurs during the morning. Some controversial results were found among experiments as to eggshell quality during the different periods of the day. Variation on the lighting program had little influence on the other performance and egg quality parameters.

The effects of alternative forced-molting methods on the performance and egg quality of commercial layers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of a titanium device in lateral sinus floor elevation: an experimental study in monkeys

Aim: To evaluate the effect of a space-maintaining device fixed to the lateral wall of the maxillary sinus after the elevation of the sinus mucosa on bone filling of the sinus cavity. Material and methods: Immediately after the elevation of the maxillary sinus Schneiderian membrane accomplished through lateral antrostomy in four monkeys, a titanium device was affixed to the lateral sinus wall protruding into the sinus cavity to maintain the mucosa elevated without the use of grafting material. The healing of the tissue around the implants was evaluated after 3 and 6 months. Ground sections were prepared and analyzed histologically. Results: The void under the elevated sinus membrane, originally filled with the blood clot, was reduced after 3 as well as after 6 months of healing of about 56% and 40.5%, respectively. In seven out of eight cases, the devices had perforated the sinus mucosa. The formation of mineralized bone and bone marrow amounted to about 42% and 69% after 3 and 6 months, respectively. The connective tissue represented about 53% and 23% of the newly formed tissue after 3 and 6 months, respectively. Conclusions: New bone formation was found below the devices. However, shrinkage of the newly formed tissue was observed both after 3 and 6 months of healing. Hence, the space-maintaining function of the devices used in the present study has to be questioned.

Recursive hierarchic segmentation analysis of bone mineral density changes on digital panoramic images

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of disinfection on adhesion of reline polymers

Cylinders (3.5 x 5.0 mm) of the reline resins Kooliner (K), New Truliner (N), Tokuso Rebase Fast (T), and Ufi Gel Hard (U) were bonded to cylinders (20 x 20 mm) of the denture base resin Lucitone 550 (L), and samples were divided into two controls and four test groups (n = 8). Shear tests (0.5 mm/min) were performed after polymerization or immersion in water (37 degrees C) for 7 days (controls); two or seven cycles of disinfection by immersion in sodium perborate (50 degrees C/10 min) or microwave irradiation (650 W/6 min). Statistical analyses (alpha = 0.05) revealed that two cycles of microwave and chemical disinfection increased the mean bond strengths of materials T (9.08 to 12.93 MPa) and L (18.89 to 23.02 MPa). For resin L, seven cycles of chemical (15.72 MPa) and microwave (17.82 MPa) disinfection decreased the shear bond strength compared with the respective control (21.74 MPa). Resins U (13.12 MPa), K (8.44 MPa), and N (7.98 MPa) remained unaffected.

Effect of microwave disinfection on the flexural strength of hard chairside reline resins

Objectives: This study investigated the effect of microwave disinfection (650 W/6 min) on the flexural strength of five hard chairside reline resins (Kooliner, Duraliner II, Tokuso Rebase Fast, Ufi Get Hard, New Truliner) and one denture base resin (Lucitone 550).Methods: Thirty-two specimens (3.1x10x64 mm) from each acrylic resin were produced and divided into four groups of eight specimens each. The flexural test was performed after polymerization (G1), after two cycles of microwave disinfection (G2), after 7 days storage in water at 37 degrees C (G3) and after seven cycles of microwave disinfection (G4). Specimens from group G4 were microwaved daily being stored in water at 37 degrees C between exposures. The specimens were placed in three-point bend fixture in a MTS machine and loaded until failure. The flexural values (MPa) were submitted to ANOVA and Tukey's test (p=0.05).Results: Two cycles of microwave disinfection promoted a significant increase in flexural strength for materials Kooliner and Lucitone 550. After seven cycles of microwave disinfection, materials Kooliner and New Truliner showed a significant increase (p<0.05) in flexural values. The flexural strength of the material Tokuso Rebase was not significantly affected by microwave irradiation. Seven cycles of microwave disinfection resulted in a significant decrease in the flexural strength of material Duraliner II. Material Ufi Get Hard was the only resin detrimentally affected by microwave disinfection after two and seven cycles.Conclusions: Microwave disinfection did not adversely affect the flexural strength of all tested materials with the exception of material Ufi Get Hard. (c) 2005 Elsevier Ltd. All rights reserved.

Effect of microwave disinfection on the bond strength of denture teeth to acrylic resins

During microwave disinfection, the dentures are exposed to water at high temperature and this may affect the bond between the denture teeth and the acrylic resin from which dentures are made. In this study, a shear test was used to evaluate the effect of microwave disinfection (650W/6 min) on the bond strength of two types of denture teeth to three acrylic resins, with different polymerization methods. The specimens were submitted to the shear tests (0.5 mm/min) after: immersion in water (37 degrees C) for 48 h or 8 days (controls); two or seven cycles of microwave disinfection (test groups). Data (MPa) were analyzed using three-way ANOVA and Tukey HSD test (alpha = 0.05). Microwave disinfection did not adversely affect the bond strength of all tested materials with the exception of QC-20 bonded to SR Vivodent PE, for which a significant reduction was recorded after seven cycles of irradiation. (C) 2007 Elsevier Ltd. All rights reserved.

The occurrence of porosity in reline acrylic resins. Effect of microwave disinfection

Microwave energy has proved to be an effective method for disinfecting acrylic dentures. However, the effect of microwave heating on the porosity of autopolymerising denture reline resins has not been investigated.The purpose of the study was to determine the effect of microwave disinfection on the porosity of autopolymerised denture reline materials (Kooliner-K, New Truliner-NT, Tokuso Rebase Fast-TR and Ufi Gel Hard-UGH) and a conventional heat-polymerised denture base resin (Lucitone 550-L).Specimens (10 mm x 20 mm x 1 mm) were obtained from the impression surface of the palatal mucosa in a single person and divided into four groups (n = 5). The porosity was evaluated after polymerisation (C1), after two cycles of microwave disinfection (MW2), after seven cycles of microwave disinfection (MW7) and after 7 days storage in water at 37 degrees C (C2). Specimens from group MW7 were exposed to microwave disinfection daily being stored in water at 37 degrees C between exposures. All the replicas were sputter coated with gold and micrographs/digital images were taken of each replica using scanning electron microscopy at magnification x 100. The SEM micrographs were then examined using an image analyser to determine the number of pores. Comparison between materials and groups were made using Kruskal-Wallis tests.MW7 resulted in a significant increase in the number from the pores of material K, but decreased in number in reline material TR and UGH reline resin. The number of pores in materials NT and L remained unaffected following microwave disinfection.Differences in the porosity amongst the materials and for different experimental conditions were observed following microwave disinfection.

Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials

This study evaluated the influence of microwave disinfection on the strength of intact and relined denture bases. Water sorption and solubility were also evaluated. A heat-polymerized acrylic resin (Lucitone 550) was used to construct 4-mm-thick (n = 40) and 2-mm-thick (n = 160) denture bases. Denture bases (2mm) were relined with an autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Specimens were divided into four groups (n = 10): without treatment, one or seven cycles of microwave disinfection (650 W for 6 min), and water storage at 37 degrees C for 7 days. Specimens were vertically loaded (5 mm/min) until failure. Disc-shaped specimens (50 min x 0.5 mm) were fabricated (n = 10) to evaluate water sorption and solubility. Data on maximum fracture load (N), deflection (%), and solubility (%) were analyzed by two-way analysis of variance and Student-Newman-Keuls tests (alpha = 0.05). One cycle of microwave disinfection decreased the deflection at fracture and fracture energy of Tokuso Rebase Fast and New Truliner specimens. The strength of denture bases microwaved daily for 7 days was similar to the strength of those immersed in water for 7 days. Microwave disinfection increased the water sorption of all materials and affected the solubility of the reline materials. (C) 2007 Wiley Periodicals, Inc.

Occurrence of feline immunodeficiency virus infection in cats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic differentiation among ten populations of the genus Neoplecostomus (Teleostei: Loricariidae) from the upper Parana River basin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative chromosome mapping of repetitive sequences. Implications for genomic evolution in the fish, Hoplias malabaricus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hepatozoon canis infection associated with dog ticks of rural areas of Rio de Janeiro State, Brazil

Hepatozoon canis is a tick-borne protozoan that infects dogs and has been reported throughout the world. Manifestation of H. canis infection varies from being sub-clinical in apparently healthy dogs to severe illness. The main vector of the infection is the dog tick, Rhipicephalus sanguineus although other species may also transmit this agent. H. canis has been reported previously in Brazil, but mostly as an occasional finding during laboratory exams and always associated with other diseases. The prevalence of H. canis in dogs of rural areas of Brazil has been little studied. For this study, 250 dogs from seven counties of Rio de Janeiro state were examined. All the dogs were from rural areas, near forest. of the dogs examined, 26 dogs were from Seropedica, 82 from Itaguai, 41 from Paracambi, 26 from Mangaratiba, 32 from Barra do Pirai, 32 from Pirai and 11 from Miguel Pereira. Blood smears from the peripheral blood of the ear were taken and ticks found on the dogs were collected for identification in the laboratory. Using blood smear evaluation, H. canis was identified in 39.2% of the animals examined. Other hemoparasites identified were Babesia canis (5.2%) and Ehrlichia canis (4.8%). Four tick species were found parasitizing the dogs: Amblyomma cajennense (23.6%), R. sanguineus (12.4%), Amblyomma aureolatum (2.8%) and Amblyomma ovale (2.0%). There was a positive correlation between the presence of A. cajennense and H. canis infection. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Helminths of the teiid lizard Kentropyx calcarata (Squamata) from an Amazonian site in western Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)