Analysis of the strengthening and toughening of a biomaterial interface

Based on the transmission electron micrographs of nacre, the existence of mineral bridges in the organic matrix interface is confirmed. It is proposed that the microarchitecture of nacre should be considered as a "brick-bridge-mortar" (BBM) arrangement rather than traditional "brick and mortar" (BM) one. Experiments and analyses indicate that the mineral bridges effectively affect the strength and toughness of the interfaces in nacre. Comparison with a laminated composite with BM structure, SiC/BN, shows that the pattern of the crack extension and the toughening mechanism of the two materials are different. This reveals that the mineral bridges play a key role in the toughening mechanisms of nacre, which gives a conceptual guidance in material synthesis.

A study of the mechanism of consolidating metal-powder under explosive-implosive shock-waves

A study of the two-dimensional flow pattern of particles in consolidation process under explosive-implosive shock waves has been performed to further understand the mechanism of shock-wave consolidation of metal powder, in which bunched low-carbon steel wires were used instead of powder. Pressure in the compact ranges from 6 to 30 GPa. Some wires were electroplated with brass, some pickled. By this means, the flow pattern at particle surfaces was observed. The interparticle bonding and microstructure have been investigated systematically for the consolidated specimens by means of optical and electron microscopy, as well as by microhardness. The experimental results presented here are qualitatively consistent with Williamson's numerical simulation result when particle arrangement is close packed, but yield more extensive information. The effect of surface condition of particle on consolidation quality was also studied in order to explore ways of increasing the strength of the compacts. Based on these experiments, a physical model for metal powder shock consolidation has been established.

Molecular genetics of the Drosophila eyes absent gene

The Drosophila compound eye has provided a genetic approach to understanding the specification of cell fates during differentiation. The eye is made up of some 750 repeated units or ommatidia, arranged in a lattice. The cellular composition of each ommatidium is identical. The arrangement of the lattice and the specification of cell fates in each ommatidium are thought to occur in development through cellular interactions with the local environment. Many mutations have been studied that disrupt the proper patterning and cell fating in the eye. The eyes absent (eya) mutation, the subject of this thesis, was chosen because of its eyeless phenotype. In eya mutants, eye progenitor cells undergo programmed cell death before the onset of patterning has occurred. The molecular genetic analysis of the gene is presented.

The eye arises from the larval eye-antennal imaginal disc. During the third larval instar, a wave of differentiation progresses across the disc, marked by a furrow. Anterior to the furrow, proliferating cells are found in apparent disarray. Posterior to the furrow, clusters of differentiating cells can be discerned, that correspond to the ommatidia of the adult eye. Analysis of an allelic series of eya mutants in comparison to wild type revealed the presence of a selection point: a wave of programmed cell death that normally precedes the furrow. In eya mutants, an excessive number of eye progenitor cells die at this selection point, suggesting the eya gene influences the distribution of cells between fates of death and differentiation.

In addition to its role in the eye, the eya gene has an embryonic function. The eye function is autonomous to the eye progenitor cells. Molecular maps of the eye and embryonic phenotypes are different. Therefore, the function of eya in the eye can be treated independently of the embryonic function. Cloning of the gene reveals two cDNA's that are identical except for the use of an alternatively-spliced 5' exon. The predicted protein products differ only at the N-termini. Sequence analysis shows these two proteins to be the first of their kind to be isolated. Trangenic studies using the two cDNA's show that either gene product is able to rescue the eye phenotype of eya mutants.

The eya gene exhibits interallelic complementation. This interaction is an example of an "allelic position effect": an interaction that depends on the relative position in the genome of the two alleles, which is thought to be mediated by chromosomal pairing. The interaction at eya is essentially identical to a phenomenon known as transvection, which is an allelic position effect that is sensitive to certain kinds of chromosomal rearrangements. A current model for the mechanism of transvection is the trans action of gene regulatory regions. The eya locus is particularly well suited for the study of transvection because the mutant phenotypes can be quantified by scoring the size of the eye.

The molecular genetic analysis of eya provides a system for uncovering mechanisms underlying differentiation, developmentally regulated programmed cell death, and gene regulation.

A comparison of the costs of operation of the motor bus, Birney safety car, and trolley bus on the local transportation routes in Pasadena

With the installation by the Pacific Electric Railway of a bus system in Pasadena to supplant most of its trolley lines, the problem of the comparison of the costs of the two systems naturally presented itself. The study here undertaken was originally started as just a comparison of the motor bus and Birney Safety Car, but as the work progressed it seemed advisable to include the trolley bus as well - a method of transportation that is comparatively new as far as development is concerned, but which seems to be finding increasing favor in the East.

Aspects of the washout of salmonid eggs. 1. Observations on the physical characteristics of real and artificial eggs, their rate of fall in a water column and their pattern of settlement in an experimental channel

When salmonid redds are disrupted by spates, the displaced eggs will drift downstream. The mean distance of travel, the types of locations in which the eggs resettle and the depth of reburial of displaced eggs are not known. Investigation of these topics under field conditions presents considerable practical problems, though the use of artificial eggs might help to overcome some of them. Attempts to assess the similarities and/or differences in performance between real and artificial eggs are essential before artificial eggs can validly be used to simulate real eggs. The present report first compares the two types of egg in terms of their measurable physical characteristics (e.g. dimensions and density). The rate at which eggs fall in still water will relate to the rate at which they are likely to resettle in flowing water in the field. As the rate of fall will be influenced by a number of additional factors (e.g. shape and surface texture) which are not easily measured directly, the rates of fall of the two types of egg have been compared directly under controlled conditions. Finally, comparisons of the pattern of settlement of the two types of egg in flowing water in an experimental channel have been made. Although the work was primarily aimed at testing the value of artificial eggs as a simulation of real eggs, several side issues more directly concerned with the properties of real eggs and the likely distance of drift in natural streams have also been explored. This is the first of three reports made on this topic by the author in 1984.

A tool for better management of water quality during periods of algal blooms: the case of the River Oise

Like other rivers in the Paris area, the Oise is subject to important seasonal algal blooms. This eutrophication generates notable problems for the production of drinking-water from a treatment plant on the river at Méry. A mathematical model has been developed to simulate variation in water quality in a pre-treatment storage basin, and another model is currently being adapted to model the River Oise. Integration of the two models should provide a comprehensive tool for predicting variations of phytoplankton and water-quality parameters associated with algal blooms. This will be a decision-aid for optimizing control of the treatment process for providing potable water.

CP and the three pion decay of the K°

The time distribution of the decays of an initially pure K° beam into π+π-π° has been analyzed to determine the complex parameter W (also known as Ƞ^+-° and (x + iy)). The K° beam was produced in a brass target by the interactions of a 2.85 GeV/c π- beam which was generated on an internal target in the Lawrence Radiation Laboratory (LRL) Bevatron. The counters and hodoscopes in the apparatus selected for events with a neutral (K°) produced in the brass target, two charged secondaries passing through a magnet spectrometer and a ɣ-ray shower in a shower hodoscope.

From the 275K apparatus triggers, 148 K → π+π-π° events were isolated. The presence of a ɣ-ray shower in the optical shower chambers and a two-prong vee in the optical spark chambers were devices used to isolate the events. The backgrounds were further reduced by reconstructing the momenta of the two charged secondaries and applying kinematic constraints.

The best fit to the final sample of 148 events distributed between .3 and 7.0 K_S lifetimes gives:

ReW = -.05 ±.17

ImW = +.39 +.35/-.37

This result is consistent with both CPT invariance (ReW = 0) and CP invariance (W = 0). Backgrounds are estimated to be less than 10% and systematic effects have also been estimated to be negligible.

An analysis of the present data on CP violation in this decay mode and other K° decay modes has estimated the phase of ɛ to be 45.3 ± 2.3 degrees. This result is consistent with the super weak theories of CP violation which predicts the phase of ɛ to be 43°. This estimate is in turn used to predict the phase of Ƞ°° to be 48.0 ± 7.9 degrees. This is a substantial improvement on presently available measurements. The largest error in this analysis comes from the present limits on W from the world average of recent experiments. The K → πuʋ mode produces the next largest error. Therefore further experimentation in these modes would be useful.

Symposium on World tuna fisheries: commemorating the 50th anniversary of the establishment of the Inter-American Tropical Tuna Commission

The Inter-American Tropical Tuna Commission (lA TTC) came into existence in 1950, after its convention, signed by representatives ofCosta Rica and the United States in 1949, was ratified. It was the first international tuna organization, and only the third international fisheries organization, whose staff has had the responsibility for performing scientific research, the others being the International Pacific Halibut Commission, established in 1923, and the International Pacific Salmon Fisheries Commission, established in 1937. The current members of the IATTC are Costa Rica, Ecuador, EI Salvador, France, Guatemala, Japan, Mexico, Nicaragua, Panama, the United States, Vanuatu, and Venezuela. The first Director ofthe IATTC was Dr. Milner B. Schaefer, who was in that position from 1950 to 1963. He was followed by Dr. John L. Kask (1963-1969), Dr. James Joseph (1969-1999), and Dr. Robin L. Allen (1999-present). The success ofthe IATIC showed that it was possible to carry out research and management on an international, high-seas fishery successfully. Since then other international organizations for tuna management, including the International Commission for the Conservation of Atlantic Tunas (1969), the Forum Fisheries Agency (1979), the Commission for the Conservation of Southern Bluefin Tuna (1994), and the Indian Ocean Tuna Commission (1996), were established. Appropriately, the 50th anniversary celebration was held in Costa Rica, one of the two charter members of the IATTC. Persons who have held important positions in international fishery management in various parts ofthe world spoke at the celebration. Their presentations, except for that describing the Indian Ocean Tuna Commission, are reproduced in this volume.

Comparative evaluation of the proximate composition of smoked and salted-dried Oreochromis niloticus

This study was carried out to evaluate and compare the shelf life of smoked and salted-dried Oreochromis niloticus over a relative time period. Improved traditional smoking kiln and salting were employed respectively. The smoking kiln was constructed with iron metal with a dimension of 120cm x 70cm and consisting of three smoking racks with dimension of 30 x 30cm each. Table salt was used for preservation of some of the specimens. A total of 30 samples weighing 7.1kg were used. Fifteen (15) samples each were used respectively for smoking and salting. Satisfactory smoking was achieved in two days while salting to dryness was accomplished in four days. The initial percentage proximate compositions of the smoked products were 7.94%, 66. 97%, 8.`84% and 2.96% for moisture, protein, lipid and ash respectively, while that of the salted products were 8.37%, 63.93%, 12.91% and 3.95% for moisture, protein, lipid and ash. Preliminary results of the proximate compositions of the two products at the end of the fifth week of storage were as follows; 8.23%, 65.70%, 10.63% and 2.23% for moisture, protein, lipid and ash respectively of the smoked products, while 6.33%, 64.25%, 11.28% and 2.38% represent the values of moisture, protein, lipid and ash of the salted-dried products. By the individual product proximate characterization, it was discovered that both products were still relatively in good and acceptable condition. However, the protein and moisture values of the smoked products were relatively greater than those of the salted-dried products, while on the other hand, lipid and ash were relatively greater in salted-dried products. The prevailed relative higher moisture in the smoked products constitutes a predisposing condition for microbial activity and spoilage of the products, while the relative higher percentage lipid in the salted-dried products predisposes the products to lipid oxidation and rancidity.

Aspects of the biology and population dynamics of freshwater mussels in Lake Kariba and Lake McIlwaine

The essential aim of this study was to provide a broad foundation of biological knowledge upon which a programme of mussel utilization and management could be built. Results of the study are presented in three main sections. Part 1 describes the stock of Lake Kariba and Lake McIlwaine; part 2 describes various aspects of the breeding biology of the three species; and part 3 presents the results of morphological, biochemical and age analyses - aspects which are used for initial standing crop and production calculations. The final discussion concludes the thesis with a general examination in ecological terms of the factors which have influenced the development and nature of the mussel faunas of the two lakes under consideration.

Can the age of the tropical species be determined by otolith measurement?: a study using Pristipomoides filamentosus (Pisces: Lutjanidae) from the Mahe Plateau, Seychelles

The sagittal otoliths of bluespot jobfish (Pristipomoides flamentosus) from the Mahe Plateau, Seychelles, were examined for growth rings using light microscopy. Banding with putative annual and monthly frequency were observed. Consistent age estimates were derived from each of the two patterns. The resulting length-at-age data were use t estimate the parameters K and t sub(0), viz: K=0.33, t sub(0) = 0.16 for males and K = 0.36, t sub(0) = 0.06 for females (using von Bertalanffy plots). Possible causes of the banding are discussed.

Life history and population dynamics of the finetooth shark (Carcharhinus isodon) in the northeastern Gulf of Mexico

The life history and population dynamics of the finetooth shark (Carcharhinus isodon) in the north-eastern Gulf of Mexico were studied by determining age, growth, size-at-maturity, natural mortality, productivity, and elasticity of vital rates of the population. The von Bertalanffy growth model was estimated as Lt=1559 mm TL (1–e–0.24 (t+2.07)) for females and Lt = 1337 mm TL (1–e–0.41 (t+1.39)) for males. For comparison, the Fabens growth equation was also fitted separately to observed size-at-age data, and the fits to the data were found to be similar. The oldest aged specimens were 8.0 and 8.1 yr, and theoretical longevity estimates were 14.4 and 8.5 yr for females and males, respectively. Median length at maturity was 1187 and 1230 mm TL, equivalent to 3.9 and 4.3 yr for males and females, respectively. Two scenarios, based on the results of the two equations used to describe growth, were considered for population modeling and the results were similar. Annual rates of survivorship estimated through five methods ranged from 0.850/yr to 0.607/yr for scenario 1 and from 0.840/yr to 0.590/yr for scenario 2. Productivities were 0.041/yr for scenario 1 and 0.038/yr for scenario 2 when the population level that produces maximum sustain-able yield is assumed to occur at an instantaneous total mortality rate (Z) equaling 1.5 M, and were 0.071/yr and 0.067/yr, when Z=2 M for scenario 1 and 2, respectively. Mean generation time was 6.96 yr and 6.34 yr for scenarios 1 and 2, respectively. Elasticities calculated through simulation of Leslie matrices averaged 12.6% (12.1% for scenario 2) for fertility, 47.7% (46.2% for scenario 2) for juvenile survival, and 39.7% (41.6% for scenario 2) for adult survival. In all, the finetooth shark exhibits life-history and population characteristics intermediate to those of sharks in the small coastal complex and those from some large coastal species, such as the blacktip shark (Carcharhinus limbatus).

Study of the electric loading aspects of the BDFM using a lumped parameter thermal model

Details of a lumped parameter thermal model for studying thermal aspects of the frame size 180 nested loop rotor BDFM at the University of Cambridge are presented. Predictions of the model are verified against measured end winding and rotor bar temperatures that were measured with the machine excited from a DC source. The model is used to assess the thermal coupling between the stator windings and rotor heating. The thermal coupling between the stator windings is assessed by studying the difference of the steady state temperatures of the two stator end windings for different excitations. The rotor heating is assessed by studying the temperatures of regions of interest for different excitations.

Phylogeny of the caniform carnivora: evidence from multiple genes

The monophyletic group Caniformia in the order Carnivora currently comprises seven families whose relationships remain contentious. The phylogenetic positions of the two panda species within the Caniformia have also been evolutionary puzzles over the past

Anti-HIV Activities of the Compounds Isolated from Polygonum cuspidatum and Polygonum multiflorum

The 70% EtOH extract of Polygonum cuspidatum showed inhibitory action against HIV-1-induced syncytium formation at non-cytotoxic concentrations in vitro with a 50% effective concentration (EC50) of 13.94 +/- 3.41 mu g/mL. Through bioactivity-guided fractionation, 20 phenolic compounds, including eight stilbenoids, were isolated from the roots of Polygonum cuspidatum, and their anti-HIV-1 activities were evaluated. Results showed that compounds 1, 13, 14, and 16 demonstrated fairly strong antiviral activity against HIV-1-induced cytopathic effects in C8166 lymphocytes at non-cytotoxic concentrations, with EC50 values of 4.37 +/- 1.96 mu g/mL, 19.97 +/- 5.09, 14.4 +/- 1.34 mu g/mL, and 11.29 +/- 6.26 mu g/mL and therapeutic index (TI) values of 8.12, > 10.02, > 13.89, and > 17.71, respectively. Other compounds showed either weak or no effects. Compound 6 also showed weak inhibition (153.42 +/- 19.25 mu g/mL); however, it possesses very good water solubility and showed almost no cytotoxicity (> 2000 mu g/mL), therefore achieving a fairly good TI (13.04). The activities of the two compounds (3 and 18) from Polygonum multiflorum were also assayed. The relationship between molecular structures and their bioactivities was also discussed.