Growth and reproduction of the understory palm Geonoma schottiana Mart. in the gallery forest in Central Brazil

To understand the growth and reproduction of the palm Geonoma schottiana in the gallery forest of Central Brazil, two hypotheses were raised: (i) production of leaves and reproductive structures are concentrated in the period of the year with high light availability; (ii) leaf production and reproductive activity are related to plant length. However, it is expected that senility effects will cause fast reduction in growth and reproduction activities in higher plants. Growth and reproduction were concentrated in the dry season, when insolation is higher than in the wet season, suggesting that leaf and inflorescence production on G. schottiana in the gallery forest understory is more limited by light than by soil humidity. As the individual grows, leaf number and blade area increase, but reproduction activity is independent of plant length. Resources stored in the stem are important to growth, but exogenous factors, as canopy openness, should be more important to reproduction. Plant senescence seems to have a lesser effect on the production of vegetative and reproductive structures in G. schottiana than has been detected in congeneric species with greater clonal activity.

Habitat utilization and CAM occurrence among epiphytic bromeliads in a dry forest from southeastern Brazil

We studied the community and habitat occupation of epiphytes to understand how these plants cope with a supposedly stressful habitat: i) how general epiphytes occupy tree trunks, ii) how epiphytic bromeliads, occupy their supportive trees, iii) how CAM bromeliads are spatially distributed. The study was done in the dry forest of Jacarepiá, State of Rio de Janeiro. Data collection on epiphytes, phorophytes, and trees was based on the point-center quarter method. The photosynthetic pathway of the bromeliad species was determined using isotope ratio mass spectrometry. The presence of Gesneriaceae, Araceae, and Cactaceae indicates that some humidity is present in the area allowing the presence of supposedly less-specialized epiphytes. There was no correlation between epiphyte abundance and phorophyte diameter, and phorophytes had larger sizes than trees that do not host epiphytes. There was correlation between tree diameter and bromeliad abundance, and lack of correlation between diameter and bromeliad richness. Only one species was typical of the understorey and one was typical of the canopy, while intermediate heights were occupied by different species. The only C3 bromeliad species (Vriesea procera (Mart. ex Schult.f.) Wittm.) was significantly more exposed than the other species. If CAM occurrence is related to water economy, the fact that a C3 species is subjected to more exposed conditions is remarkable. Further comments are presented on the proportion between CAM bromeliad species and abundance in dry forest. Regarding life forms, holoepiphytes, as opposed to hemiepiphytes, showed not to be restricted by the phorophyte's diameter suggesting a more successful establishment of this life form.

Leaf damage in a mangrove swamp at Sepetiba Bay, Rio de Janeiro, Brazil

Leaf damage to Rhizophora mangle L., Avicennia schaueriana Stapf. & Leechman, and Laguncularia racemosa L. was studied in a two hectare mangrove swamp site in Sepetiba Bay. Seventeen arthropod morphospecies were identified as being responsible for the damage, and their species diversity was highest on A. schaueriana, followed by R. mangle and L. racemosa. Damage in terms of relative area was greatest in L. racemosa. Almost 9% of mangrove canopy leaf area demonstrated some damage. Loss of leaf area to herbivory was 12.1%, 8.3% and 6.2% in L. racemosa, A. schaueriana and R. mangle respectively. L. racemosa and A. schaueriana showed high percentages of leaf-margin damage in terms of the total damaged leaf area (82.2% and 56.3% respectively), while the most important type of damage in R. mangle was necrosis, representing 58.1% of the total damaged leaf area.

Plant-plant associations and population structure of four woody plant species in a patchy coastal vegetation of Southeastern Brazil

We examined plant population structure and interspecific associations for juveniles and adults of four woody species (Andira legalis (Vell.) Toledo, Clusia hilariana Schltdl., Protium icicariba (DC.) Marchand and Vernonia crotonoides Sch. Bip. ex Baker) in a patchy vegetation on a sandy coastal plain (restinga) in SE - Brazil. We found 101 vegetation patches in a 0.5 ha grid and these were divided into two distinct size classes, with large patches (> 20 m²) containing the majority of adult individuals of the species studied. The most abundant species, P. icicariba (465 individuals) and C. hilariana (312), had actively regenerating populations, whereas A. legalis (20) and V. crotonoides (338) showed evidence of intermittent regeneration. The regeneration niches of the four species differed as did their investment in vegetative reproduction: for instance, 81% of C. hilariana seedlings were found growing inside tank-bromeliads contrasting with only 3% of P. icicariba in this habitat. Additionally, 28% of regenerants of C. hilariana originated vegetatively, contrasting with only 6% for P. icicariba. All significant associations between species found in the study were positive. There was a positive association between adults of C. hilariana and P. icicariba, as well as between adults of C. hilariana and juveniles of both. This suggests that P. icicariba is successfully establishing under the canopy of C. hilariana and highlights the role of C. hilariana in generating vegetation cover that will be later dominated by other woody plant species, as an important process for maintenance of plant diversity in this restinga vegetation.

Variation in nitrogen use strategies and photosynthetic pathways among vascular epiphytes in the Brazilian Central Amazon

The variation in nitrogen use strategies and photosynthetic pathways among vascular epiphyte families was addressed in a white-sand vegetation in the Brazilian Central Amazon. Foliar nitrogen and carbon concentrations and their isotopic composition (δ15N and δ13C, respectively) were measured in epiphytes (Araceae, Bromeliaceae and Orchidaceae) and their host trees. The host tree Aldina heterophylla had higher foliar N concentration and lower C:N ratio (2.1 ± 0.06% and 23.6 ± 0.8) than its dwellers. Tree foliar δ15N differed only from that of the orchids. Comparing the epiphyte families, the aroids had the highest foliar N concentration and lowest C:N ratios (1.4 ± 0.1% and 34.9 ± 4.2, respectively). The orchids had more negative foliar δ15N values (-3.5 ± 0.2‰) than the aroids (-1.9 ± 0.7‰) and the bromeliads (-1.1 ± 0.6‰). Within each family, aroid and orchid taxa differed in relation to foliar N concentrations and C:N ratios, whereas no internal variation was detected within bromeliads. The differences in foliar δ15N observed herein seem to be related to the differential reliance on the available N sources for epiphytes, as well as to the microhabitat quality within the canopy. In relation to epiphyte foliar δ13C, the majority of epiphytes use the water-conserving CAM-pathway (δ13C values around -17‰), commonly associated with plants that live under limited and intermittent water supply. Only the aroids and one orchid taxon indicated the use of C3-pathway (δ13C values around -30‰).

Flowering and fruiting of Aulonemia aristulata: a gynomonoecious woody bamboo species from Atlantic Forest in Brazil

Aulonemia aristulata (Döll) McClure is a lignified bamboo species endemic to Brazil. This species occurs in southeastern forests and can reach high density at forest edges, dominating the understory of canopy-disturbed forest patches. The goal of this study was to describe the flowering period, floral biology, fruiting and seedling recruitment of A. aristulata in natural conditions in two areas located in a segment of the Atlantic Forest. Data on the morphology of the synflorescences and florets, timing and sequence of the anthesis events and floral visitors were recorded. Natural pollinators (open pollination or control) as well as spontaneous self-pollination were also checked. Pollen viability was estimated using the acetocarmine technique. Aulonemia aristulata is monocarpic (semelparous) with gregarious flowering. All culms in both studied areas blossomed and fruited between August and November 2007, dying subsequently between December 2007 and April 2008. Two types of synflorescences and flowers were observed: terminal with bisexual and protandric florets, with the anthesis lasting for 3-4 days; and axillary, with morphologically bisexual, but functionally female, florets and anthesis lasting for 3-4 days. The latter were also observed in the rhizome of plants whose aerial portion had been removed. The presence of axillary synflorescences with pistillate flowers is described here for the first time in Aulonemia species. Moreover, this is the first report of gynomonoecy in woody bamboo. Fruiting from bisexual florets under natural conditions (35%) was superior to that obtained from bagged synflorescences (11.5%). Fruiting from functional female florets was around 20%. Pollen viability was on the average of 90%. The results suggest that Aulonemia aristulata is anemophilous. The massive bamboo seedling recruitment observed after dieback with the ability to colonize open areas could promote the regeneration of Aulonemia aristulata.

Lecythidaceae Poit. in the Tupé Sustainable Development Reserve, Manaus, Brazil

Lecythidaceae is the family of the Brazil nut, and comprises about 300 species belonging to 17 genera with pantropical distributions. One hundred and twenty-two species belonging to nine genera are distributed throughout Brazil, demonstrating its greatest diversity in the Amazon rainforest where Lecythidaceae is also one of the most abundant families. It is usually difficult to collect fertile material from these trees because of their canopy heights, and species determinations using sterile material can be complex because of their morphological similarities. There have been relatively few studies of this family even though it is one of the most important groups in the Amazon region, and a detailed taxonomic treatment of the species of Lecythidaceae in the Tupé Sustainable Development Reserve was therefore the goal of the present work. Ten species were found, Allantoma lineata (Mart. ex O.Berg) Miers, Bertholletia excelsa Bonpl., Couratari tenuicarpa A.C.Sm., Lecythis poiteaui O. Berg; and six species of Eschweilera, the richest genus. The descriptions and identification keys of the species used 56 characters. The main reproductive characters useful for distinguishing the species were the pubescence of the inflorescence rachis, pedicel length and trichomes presence, floral symmetry, hood type, filament shape, stigma shape, fruit shape and size, and aril type. The most diagnostic vegetative characters were the type and color of the outer bark, inner bark color, midrib prominence, and petiole shape and pubescence.

Effect of trellising system on grape and wine composition of Syrah vines grown in the cerrado region of Minas Gerais

Based on the concept that the trellising system affects not only sunlight interception and carbon assimilation, but also the fruitzone microclimate, which has a great impact on fruit composition and consequently on wine quality, the effect of two trellising systems - Vertical Shoot Position (VSP) and modified Geneva Double Curtain (GDC) - on wine and berry composition of Syrah grapes grown in João Pinheiro, Northeast region of Minas Gerais State, Brazil was investigated. The parameters such as pH, berry size and weight, and seeds total phenolic contents were not affected by the training system. The GDC system produced fruits with the highest Brix and lowest titratable acidity. Berries from the VSP system presented lower anthocyanin concentration than those from the GDC system. Similar results were found for the total phenolic content of the skin of grape berries from the VSP system. GDC wines were characterized by high anthocyanin content and red color, resulting in wines with high color intensity. These data suggest that in the tropical region of Minas Gerais state, with high temperature and high sunlight intensity, the trellising system, which protects bunches against excessive radiation, should be chosen.

Use of airborne laser scanner data in demanding forest conditions

Most of the applications of airborne laser scanner data to forestry require that the point cloud be normalized, i.e., each point represents height from the ground instead of elevation. To normalize the point cloud, a digital terrain model (DTM), which is derived from the ground returns in the point cloud, is employed. Unfortunately, extracting accurate DTMs from airborne laser scanner data is a challenging task, especially in tropical forests where the canopy is normally very thick (partially closed), leading to a situation in which only a limited number of laser pulses reach the ground. Therefore, robust algorithms for extracting accurate DTMs in low-ground-point-densitysituations are needed in order to realize the full potential of airborne laser scanner data to forestry. The objective of this thesis is to develop algorithms for processing airborne laser scanner data in order to: (1) extract DTMs in demanding forest conditions (complex terrain and low number of ground points) for applications in forestry; (2) estimate canopy base height (CBH) for forest fire behavior modeling; and (3) assess the robustness of LiDAR-based high-resolution biomass estimation models against different field plot designs. Here, the aim is to find out if field plot data gathered by professional foresters can be combined with field plot data gathered by professionally trained community foresters and used in LiDAR-based high-resolution biomass estimation modeling without affecting prediction performance. The question of interest in this case is whether or not the local forest communities can achieve the level technical proficiency required for accurate forest monitoring. The algorithms for extracting DTMs from LiDAR point clouds presented in this thesis address the challenges of extracting DTMs in low-ground-point situations and in complex terrain while the algorithm for CBH estimation addresses the challenge of variations in the distribution of points in the LiDAR point cloud caused by things like variations in tree species and season of data acquisition. These algorithms are adaptive (with respect to point cloud characteristics) and exhibit a high degree of tolerance to variations in the density and distribution of points in the LiDAR point cloud. Results of comparison with existing DTM extraction algorithms showed that DTM extraction algorithms proposed in this thesis performed better with respect to accuracy of estimating tree heights from airborne laser scanner data. On the other hand, the proposed DTM extraction algorithms, being mostly based on trend surface interpolation, can not retain small artifacts in the terrain (e.g., bumps, small hills and depressions). Therefore, the DTMs generated by these algorithms are only suitable for forestry applications where the primary objective is to estimate tree heights from normalized airborne laser scanner data. On the other hand, the algorithm for estimating CBH proposed in this thesis is based on the idea of moving voxel in which gaps (openings in the canopy) which act as fuel breaks are located and their height is estimated. Test results showed a slight improvement in CBH estimation accuracy over existing CBH estimation methods which are based on height percentiles in the airborne laser scanner data. However, being based on the idea of moving voxel, this algorithm has one main advantage over existing CBH estimation methods in the context of forest fire modeling: it has great potential in providing information about vertical fuel continuity. This information can be used to create vertical fuel continuity maps which can provide more realistic information on the risk of crown fires compared to CBH.

Irrigation scheduling for Sovereign Coronation grapevine based upon evapotranspiration calculations and crop coefficients /

Several irrigation treatments were evaluated on Sovereign Coronation table grapes at two sites over a 3-year period in the cool humid Niagara Peninsula of Ontario. Trials were conducted in the Hippie (Beamsville, ON) and the Lambert Vineyards (Niagara-on-the-Lake, ON) in 2003 to 2005 with the objective of assessing the usefulness of the modified Penman-Monteith equation to accurately schedule vine irrigation needs. Data (relative humidity, windspeed, solar radiation, and temperature) required to precisely calculate evapotranspiration (ETq) were downloaded from the Ontario Weather Network. One of two ETq values (either 100 or 150%) were used in combination with one of two crop coefficients (Kc; either fixed at 0.75 or 0.2 to 0.8 based upon increasing canopy volume) to calculate the amount of irrigation water required. Five irrigation treatments were: un irrigated control; (lOOET) X Kc =0.75; 150ET X Kc =0.75; lOOET X Kc =0.2-0.8; 150ET X Kc =0.2-0.8. Transpiration, water potential (v|/), and soil moisture data were collected each growing seasons. Yield component data was collected and berries from each treatment were analyzed for soluble solids (Brix), pH, titratable acidity (TA), anthocyanins, methyl anthranilate (MA), and total volatile esters (TVE). Irrigation showed a substantial positive effect on transpiration rate and soil moisture; the control treatment showed consistently lower transpiration and soil moisture over the 3 seasons. Transpiration appeared accurately reflect Sovereign Coronation grapevines water status. Soil moisture also accurately reflected level of irrigation. Moreover, irrigation showed impact of leaf \|/, which was more negative throughout the 3 seasons for vines that were not irrigated. Irrigation had a substantial positive effect on yield (kg/vine) and its various components (clusters/vine, cluster weight, and berries/cluster) in 2003 and 2005. Berry weights were higher under the irrigated treatments at both sites. Berry weight consistently appeared to be the main factor leading to these increased yields, as inconsistent responses were noted for some yield variables. Soluble solids was highest under the ET150 and ET100 treatments both with Kc at 0.75. Both pH and TA were highest under control treatments in 2003 and 2004, but highest under irrigated treatments in 2005. Anthocyanins and phenols were highest under the control treatments in 2003 and 2004, but highest under irrigated treatments in 2005. MA and TVE were highest under the ET150 treatments. Vine and soil water status measurements (soil moisture, leaf \|/, and transpiration) confirmed that irrigation was required for the summers of 2003 and 2005 due to dry weather in those years. They also partially supported the hypothesis that the Penman-Monteith equation is useful for calculating vineyard water needs. Both ET treatments gave clear evidence that irrigation could be effective in reducing water stress and for improving vine performance, yield and fruit composition. Use of properly scheduled irrigation was beneficial for Sovereign Coronation table grapes in the Niagara region. Findings herein should give growers some strong guidehnes on when, how and how much to irrigate their vineyards.

Garden party at Charles C. Chapman's home, Fullerton, California, 1914

Garden party at Charles C. Chapman's home, Fullerton, California, September 5, 1914. Seated under a canopy with unidentified others are Mr. Harry Dierker and Mrs. C. O. Goodwin.

Impact of different irrigation strategies on grapes and wine quality of four grapevine cultivars (Vitis sp.) in cool climate conditions. An investigation into the relationships among ABA, water status, grape cultivar and wine quality

Niagara Peninsula of Ontario is the largest viticultural area in Canada. Although it is considered to be a cool and wet region, in the last decade many water stress events occurred during the growing seasons with negative effects on grape and wine quality. This study was initiated to understand and develop the best strategies for water management in vineyards and those that might contribute to grape maturity advancement. The irrigation trials investigated the impact of time of initiation (fruit set, lag phase and veraison), water replacement level based on theoretical loss through crop evapotranspiration (ETc; 100,50 and 25%) and different irrigation strategies [partial root zone drying (PRD) versus regulated deficit irrigation (RD!)] on grape composition and wine sensory profiles. The irrigation experiments were conducted in a commercial vineyard (Lambert Vineyards Inc.) located in Niagara-on-the-Lake, Ontario, from 2005 through 2009. The two experiments that tested the combination of different water regimes and irrigation time initiation were set up in a randomized block design as follows: Baco noir - three replicates x 10 treatments [(25%, 50% and 100% of ETc) x (initiation at fruit set, lag phase and veraison) + control]; Chardonnay - three replicates x seven treatments [(25%, 50% and 100% of ETc) x (initiation at fruit set and veraison) + control]. The experiments that tested different irrigation strategies were set up on two cultivars as follows: Sauvignon blanc - four replicates x four treatments [control, fully irrigated (100% ETc), PRD (100% ETc) and RDI (25% ETc)]; Cabemet Sauvignon - four replicates x five treatments [control, fully irrigated (100% ETc), PRD (100% ETc), RDI (50% ETc) and RDI (25% ETc)]. The controls in each experiment were nonirrigated. The irrigation treatments were compared for many variables related to soil water status, vine physiology, berry composition, wine sensory profile, and hormone composition [(abscisic acid (ABA) and its catabolites]. Soil moisture profile was mostly affected by irrigation treatments between 20 and 60 em depth depending on the grapevine cultivar and the regime of water applied. Overall soil moisture was consistently higher throughout the season in 100 and 50% ETc compare to the control. Transpiration rates and leaf temperature as well as shoot growth rate were the most sensitive variables to soil water status. Drip irrigation associated with RDI treatments (50% ETc and 25% ETc) had the most beneficial effects on vine physiology, fruit composition and wine varietal typicity, mainly by maintaining a balance between vegetative and reproductive parts of the vine. Neither the control nor the 100 ETc had overall a positive effect on grape composition and wine sensory typicity. The time of irrigation initiation affected the vine physiology and grape quality, the most positive effect was found in treatments initiated at lag phase and veraison. RDI treatments were overall more consistent in their positive effect on grape composition and wine varietal typicity comparing to PRD treatment. The greatest difference between non-irrigated and irrigated vines in most of the variables studied was found in 2007, the driest and hottest season of the experimental period. Soil water status had a greater and more consistent effect on red grapevine cultivars rather than on white winegrape cultivars. To understand the relationships among soil and plant water status, plant physiology and the hormonal profiles associated with it, abscisic acid (ABA) and its catabolites [phaseic acid (PA), dihydrophaseic acid (DPA), 7-hydroxy-ABA (TOH-ABA), 8' -hydroxy-ABA, neophaseic acid and abscisic acid glucose ester (ABA-GE)] were analyzed in leaves and berries from the Baco noir and Chardonnay irrigation trials over two growing seasons. ABA and some of its catabolites accurately described the water status in the vines. Endogenous ABA and some of its catabolites were strongly affected in Baco noir and Chardonnay by both the water regime (i.e. ET level) and timing of irrigation initiation. Chardonnay grapevines produced less ABA in both leaves and berries compared to Baco noir, which indicated that ABA synthesis is also cultivar dependant. ABA-GE was the main catabolite in treatments with high water deficits, while PA and DPA were higher in treatments with high water status, suggesting that the vine produced more ABA-GE under water deficits to maintain rapid control of the stomata. These differences between irrigation treatments with respect to ABA and catabolites were particularly noticeable in the dry 2007 season. Two trials using exogenous ABA investigated the effect of different concentrations of ABA and organs targeted for spraying, on grape maturation and berry composition of Cabemet Sauvignon grapevines, in two cool and wet seasons (2008-2009). The fIrst experiment consisted of three replicates x three treatments [(150 and 300 mg/L, both applications only on clusters) + untreated control] while the second experiment consisted in three replicates x four treatments [(full canopy, only clusters, and only leaves sprayed with 300 ppm ABA) + untreated control]. Exogenous ABA was effective in hastening veraison, and improving the composition of Cabemet Sauvignon. Ability of ABA to control the timing of grape berry maturation was dependant on both solution concentration and the target organ. ABA affected not only fruit composition but also yield components. Berries treated with ABA had lower weight and higher skin dry mass, which constitutes qualitative aspects desired in the wine grapes. Temporal advancement of ripening through hormonal control can lead to earlier fruit maturation, which is a distinct advantage in cooler areas or areas with a high risk of early frost occurrence. Exogenous ABA could provide considerable benefits to wine industry in terms of grape composition, wine style and schedule activities in the winery, particularly in wet and cool years. These trials provide the ftrst comprehensive data in eastern North America on the response of important hybrid and Vitis vinifera winegrape cultivars to irrigation management. Results from this study additionally might be a forward step in understanding the ABA metabolism, and its relationship with water status. Future research should be focused on ftnding the ABA threshold required to trigger the ripening process, and how this process could be controlled in cool climates.

Understanding the Intersection of Reformed Faith and Dutch Immigrant Culture in Ontario Independent Christian Schools: Principals’ Experiences and Perspectives

In the aftermath of World War II, a wave of Dutch Reformed immigrants arrived in Ontario, many of whom joined the Christian Reformed Church. Following familiar cultural patterns, history, and their Reformed Christian faith, these immigrants settled in Ontario with remarkable institutional completeness (Breton, 1964). They quickly established independent, parent-operated Christian schools across Ontario. The primary purpose of the schools was to educate children through a comprehensive biblically based school program, yet this religious purpose often intersected with a Dutch immigrant ethnic culture. Van Dijk (2001) states that “the schools were the most important organization in maintaining the religious and ethnic identity of Calvinists” (p. 66). In this qualitative study I explore the intersection of Reformed faith and Dutch Canadian immigrant ethnic culture in Christian schools through the experiential and professional lens of eight retired principals. Employing a theoretical framework informed by Berger’s (1967) Sacred Canopy, I suggest that the intersection of faith and culture was experienced in the schools and was embodied by the schools themselves. Findings point to this intersection being located in the participants’ experience of (a) Dutchness, (b) the struggle for Christian education, (c) the ties that bound the school community together, and (d) the cloud of witnesses that founded and continues to support and encourage the Christian school community. The study offers insight into a Dutch Reformed immigrant group’s experience carving out a niche for themselves on the educational landscape in Ontario. This study also offers suggestions on how Christian schools can broaden their canopy and become more ethnically and denominationally diverse in the future.

REFLECT : logiciel de restitution des réflectances au sol pour l’amélioration de la qualité de l'information extraite des images satellitales à haute résolution spatiale

RÉSUMÉ - Les images satellitales multispectrales, notamment celles à haute résolution spatiale (plus fine que 30 m au sol), représentent une source d’information inestimable pour la prise de décision dans divers domaines liés à la gestion des ressources naturelles, à la préservation de l’environnement ou à l’aménagement et la gestion des centres urbains. Les échelles d’étude peuvent aller du local (résolutions plus fines que 5 m) à des échelles régionales (résolutions plus grossières que 5 m). Ces images caractérisent la variation de la réflectance des objets dans le spectre qui est l’information clé pour un grand nombre d’applications de ces données. Or, les mesures des capteurs satellitaux sont aussi affectées par des facteurs « parasites » liés aux conditions d’éclairement et d’observation, à l’atmosphère, à la topographie et aux propriétés des capteurs. Deux questions nous ont préoccupé dans cette recherche. Quelle est la meilleure approche pour restituer les réflectances au sol à partir des valeurs numériques enregistrées par les capteurs tenant compte des ces facteurs parasites ? Cette restitution est-elle la condition sine qua non pour extraire une information fiable des images en fonction des problématiques propres aux différents domaines d’application des images (cartographie du territoire, monitoring de l’environnement, suivi des changements du paysage, inventaires des ressources, etc.) ? Les recherches effectuées les 30 dernières années ont abouti à une série de techniques de correction des données des effets des facteurs parasites dont certaines permettent de restituer les réflectances au sol. Plusieurs questions sont cependant encore en suspens et d’autres nécessitent des approfondissements afin, d’une part d’améliorer la précision des résultats et d’autre part, de rendre ces techniques plus versatiles en les adaptant à un plus large éventail de conditions d’acquisition des données. Nous pouvons en mentionner quelques unes : - Comment prendre en compte des caractéristiques atmosphériques (notamment des particules d’aérosol) adaptées à des conditions locales et régionales et ne pas se fier à des modèles par défaut qui indiquent des tendances spatiotemporelles à long terme mais s’ajustent mal à des observations instantanées et restreintes spatialement ? - Comment tenir compte des effets de « contamination » du signal provenant de l’objet visé par le capteur par les signaux provenant des objets environnant (effet d’adjacence) ? ce phénomène devient très important pour des images de résolution plus fine que 5 m; - Quels sont les effets des angles de visée des capteurs hors nadir qui sont de plus en plus présents puisqu’ils offrent une meilleure résolution temporelle et la possibilité d’obtenir des couples d’images stéréoscopiques ? - Comment augmenter l’efficacité des techniques de traitement et d’analyse automatique des images multispectrales à des terrains accidentés et montagneux tenant compte des effets multiples du relief topographique sur le signal capté à distance ? D’autre part, malgré les nombreuses démonstrations par des chercheurs que l’information extraite des images satellitales peut être altérée à cause des tous ces facteurs parasites, force est de constater aujourd’hui que les corrections radiométriques demeurent peu utilisées sur une base routinière tel qu’est le cas pour les corrections géométriques. Pour ces dernières, les logiciels commerciaux de télédétection possèdent des algorithmes versatiles, puissants et à la portée des utilisateurs. Les algorithmes des corrections radiométriques, lorsqu’ils sont proposés, demeurent des boîtes noires peu flexibles nécessitant la plupart de temps des utilisateurs experts en la matière. Les objectifs que nous nous sommes fixés dans cette recherche sont les suivants : 1) Développer un logiciel de restitution des réflectances au sol tenant compte des questions posées ci-haut. Ce logiciel devait être suffisamment modulaire pour pouvoir le bonifier, l’améliorer et l’adapter à diverses problématiques d’application d’images satellitales; et 2) Appliquer ce logiciel dans différents contextes (urbain, agricole, forestier) et analyser les résultats obtenus afin d’évaluer le gain en précision de l’information extraite par des images satellitales transformées en images des réflectances au sol et par conséquent la nécessité d’opérer ainsi peu importe la problématique de l’application. Ainsi, à travers cette recherche, nous avons réalisé un outil de restitution de la réflectance au sol (la nouvelle version du logiciel REFLECT). Ce logiciel est basé sur la formulation (et les routines) du code 6S (Seconde Simulation du Signal Satellitaire dans le Spectre Solaire) et sur la méthode des cibles obscures pour l’estimation de l’épaisseur optique des aérosols (aerosol optical depth, AOD), qui est le facteur le plus difficile à corriger. Des améliorations substantielles ont été apportées aux modèles existants. Ces améliorations concernent essentiellement les propriétés des aérosols (intégration d’un modèle plus récent, amélioration de la recherche des cibles obscures pour l’estimation de l’AOD), la prise en compte de l’effet d’adjacence à l’aide d’un modèle de réflexion spéculaire, la prise en compte de la majorité des capteurs multispectraux à haute résolution (Landsat TM et ETM+, tous les HR de SPOT 1 à 5, EO-1 ALI et ASTER) et à très haute résolution (QuickBird et Ikonos) utilisés actuellement et la correction des effets topographiques l’aide d’un modèle qui sépare les composantes directe et diffuse du rayonnement solaire et qui s’adapte également à la canopée forestière. Les travaux de validation ont montré que la restitution de la réflectance au sol par REFLECT se fait avec une précision de l’ordre de ±0.01 unités de réflectance (pour les bandes spectrales du visible, PIR et MIR), même dans le cas d’une surface à topographie variable. Ce logiciel a permis de montrer, à travers des simulations de réflectances apparentes à quel point les facteurs parasites influant les valeurs numériques des images pouvaient modifier le signal utile qui est la réflectance au sol (erreurs de 10 à plus de 50%). REFLECT a également été utilisé pour voir l’importance de l’utilisation des réflectances au sol plutôt que les valeurs numériques brutes pour diverses applications courantes de la télédétection dans les domaines des classifications, du suivi des changements, de l’agriculture et de la foresterie. Dans la majorité des applications (suivi des changements par images multi-dates, utilisation d’indices de végétation, estimation de paramètres biophysiques, …), la correction des images est une opération cruciale pour obtenir des résultats fiables. D’un point de vue informatique, le logiciel REFLECT se présente comme une série de menus simples d’utilisation correspondant aux différentes étapes de saisie des intrants de la scène, calcul des transmittances gazeuses, estimation de l’AOD par la méthode des cibles obscures et enfin, l’application des corrections radiométriques à l’image, notamment par l’option rapide qui permet de traiter une image de 5000 par 5000 pixels en 15 minutes environ. Cette recherche ouvre une série de pistes pour d’autres améliorations des modèles et méthodes liés au domaine des corrections radiométriques, notamment en ce qui concerne l’intégration de la FDRB (fonction de distribution de la réflectance bidirectionnelle) dans la formulation, la prise en compte des nuages translucides à l’aide de la modélisation de la diffusion non sélective et l’automatisation de la méthode des pentes équivalentes proposée pour les corrections topographiques.

Impact des coupes partielles sur l’activité de coléoptères phloeophages et xylophages en forêt boréale

Ce projet de recherche évalue la réponse à court terme de coléoptères phloeophages et xylophages (Cerambycidae et Scolytinae) à différentes intensités de coupes partielles (0, 25 et 40% de la surface terrière prélevée) afin de déterminer la viabilité de cette méthode sylvicole en forêt boréale. Disposant de 12 parcelles expérimentales (4 répétitions pour chaque intensité de coupe) dans une sapinière à bouleau blanc située au sud de la forêt boréale (Québec, Canada), nous avons évalué l’abondance, la diversité ainsi que l’établissement (taux d’attaque) de ces deux groupes d’insectes, et ce dès la première année suivant la coupe. L’échantillonnage a été réalisé à l’aide de pièges à interception multidirectionnelle et de l’écorçage de sections de 3 espèces d’arbres exposées dans l’ensemble des parcelles. Nos résultats montrent une plus grande activité/abondance des deux taxons (abondance 5 à 6 fois plus élevée) ainsi qu’une composition en espèces différente et plus diversifiée dans les peuplements partiellement coupés (25 et 40%). De plus, la présence et la distribution d’espèces colonisant habituellement des hôtes affaiblis (e.g., Trypodendron lineatum, Rhagium inquisitor) – et pouvant donc réduire la valeur économique d’arbres résiduels – a été recensée et semble être favorisée entres autres par l’ouverture de la canopée et des blessures physiques faites aux arbres pendant les opérations sylvicoles. Par ailleurs, l’approche combinant différentes techniques d’échantillonnage a permis une meilleure compréhension des mécanismes de localisation/sélection d’hôte (variant en fonction de l’espèce), un aspect important de la dynamique des insectes pour l’évaluation des risques suite aux coupes forestières. Sur la base de cette étude à court terme, il ne semblerait pas y avoir de différence significative sur les risques pour le milieu quant à l’augmentation d’activité des Cerambycidae et Scolytinae entre les deux traitements de coupe appliqués. Il reste cependant indispensable de vérifier la validité de ces résultats sur une plus longue période afin d’établir des plans d’aménagement forestier durables pour la forêt boréale.