O benefício da transiluminação em estudos comunitários

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Utilização do defletómetro de impacto ligeiro, do GeoGauge e do densímetro elétrico para o controlo in situ da qualidade de materiais em obras de pavimentação rodoviária

A presente dissertação procura contribuir para avaliar a utilidade de três equipamentos ligeiros na caracterização in situ de materiais de pavimentação de infraestruturas de transporte. Aquele tipo de avaliação visa o controlo de qualidade dos materiais durante o processo construtivo, embora possa contribuir também para estimar o comportamento previsível dos materiais utilizados. O estudo centrou-se principalmente na utilização do Defletómetro de Impacto Ligeiro (DIL), do GeoGauge (GG) e do Densímetro Elétrico (DE). No entanto, realizaramse complementarmente ensaios com o Cone de Penetração Dinâmica (CPD), com o Gamadensímetro (GD) e com o Indicador de Qualidade de Pavimentos (IQP). O GG e o DIL foram concebidos com o objetivo de medirem o módulo de deformabilidade de camadas constituídas por solo ou por materiais granulares. O DE destina-se a avaliar a qualidade da compactação de camadas de solo. Numa fase inicial do trabalho, fez-se uma recolha bibliográfica sobre as características, os princípios de funcionamento e o modo operatório de cada um dos equipamentos, de modo a apoiar o estudo de caso que se realizou mais tarde no âmbito do trabalho. O estudo bibliográfico centrou-se ainda na procura dos parâmetros que é possível medir com cada um dos equipamentos estudados, bem como na procura de relações entre aqueles parâmetros. Para a realização da campanha de ensaios previamente estabelecida, o estudo incluiu a construção de um modelo físico de pavimento. O pavimento construído, com dimensões em planta da ordem de 2 1,5 m2, é constituído por duas estruturas diferentes, assentes sobre a mesma fundação, com uma espessura total de 29 cm: uma formada por uma camada granular e uma camada betuminosa; a outra constituída por uma camada de solo estabilizado com cimento e uma camada betuminosa. Os materiais constituintes do modelo foram caracterizados em laboratório e/ou in situ com recurso a ensaios convencionais. Nalguns casos recorreu-se às fichas de produto para recolher as propriedades necessárias. Na fundação estudou-se a utilização do DIL, do GG e do DE. Adicionalmente, avaliou-se o solo, com o CPD e com o GD. Nas camadas granular e de solo estabilizado estudou-se a utilização do DIL, do GG e do GD. Na camada betuminosa efetuaram-se ensaios com o DIL e com o IQP. Em cada um dos materiais colocados foi estudada a utilização dos equipamentos individualmente, de modo a obter os parâmetros caracterizadores dos materiais: o CBR (com o CPD), o módulo de deformabilidade (com o DIL, o GG e o CPD), a baridade seca e o teor em água (com o GD e o DE), a baridade (com o IQP). Quando se revelou útil, compararam-se resultados obtidos com os diferentes equipamentos para cada um dos materiais. Em termos gerais, pode afirmar-se que a utilização dos equipamentos testados pode contribuir de forma útil para avaliar os materiais in situ. Contudo, foram detetadas fragilidades no processo de caracterização, particularmente no que diz respeito à análise de sistemas multicamada com o DIL. O processo de calibração necessário à obtenção de resultados fiáveis com o DE revelou-se pouco prático. Além disso, o GG permitiu obter resultados com baixa variabilidade, embora geralmente bastante diferentes dos obtidos com o DIL. Os equipamentos complementares estudados neste trabalho mostraram ser úteis na avaliação dos materiais. Em suma, para que o controlo de qualidade seja efetivo, é necessário estabelecer, através de estudos mais alargados, quais os materiais em os equipamentos estudados podem ser utilizados com propriedade, e quais os critérios de aceitação/rejeição dos materiais que devem ser considerados em cada caso.

Modelagem da poluição difusa em uma bacia de drenagem urbana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

An augmented reality pipeline to create scenes with coherent illumination using textured cuboids

Shadows and illumination play an important role when generating a realistic scene in computer graphics. Most of the Augmented Reality (AR) systems track markers placed in a real scene and retrieve their position and orientation to serve as a frame of reference for added computer generated content, thereby producing an augmented scene. Realistic depiction of augmented content with coherent visual cues is a desired goal in many AR applications. However, rendering an augmented scene with realistic illumination is a complex task. Many existent approaches rely on a non automated pre-processing phase to retrieve illumination parameters from the scene. Other techniques rely on specific markers that contain light probes to perform environment lighting estimation. This study aims at designing a method to create AR applications with coherent illumination and shadows, using a textured cuboid marker, that does not require a training phase to provide lighting information. Such marker may be easily found in common environments: most of product packaging satisfies such characteristics. Thus, we propose a way to estimate a directional light configuration using multiple texture tracking to render AR scenes in a realistic fashion. We also propose a novel feature descriptor that is used to perform multiple texture tracking. Our descriptor is an extension of the binary descriptor, named discrete descriptor, and outperforms current state-of-the-art methods in speed, while maintaining their accuracy.

Utilização da espectroscopia no infravermelho próximo para o controle de qualidade do camarão (Litopenaeus vannamei)

This work was developed with the objective of proposing a simple, fast and versatile methodological routine using near-infrared spectroscopy (NIR) combined with multivariate analysis for the determination of ash content, moisture, protein and total lipids present in the gray shrimp (Litopenaeus vannamei ) which is conventionally performed gravimetrically after ashing at 550 ° C gravimetrically after drying at 105 ° C for the determination of moisture gravimetrically after a Soxhlet extraction using volumetric and after digestion and distillation Kjedhal respectively. Was first collected the spectra of 63 samples processed boiled shrimp Litopenaeus vannamei species. Then, the determinations by conventional standard methods were carried out. The spectra centered average underwent multiplicative scattering correction of light, smoothing Saviztky-Golay 15 points and first derivative, eliminated the noisy region, the working range was from 1100,36 to 2502,37 nm. Thus, the PLS models for predicting ash showed R 0,9471; 0,1017 and RMSEP RMSEC 0,1548; Moisture R was 0,9241; 2,5483 and RMSEP RMSEC 4,1979; R protein to 0,9201; 1,9391 and RMSEP RMSEC 2,7066; for lipids R 0,8801; 0,2827 and RMSEP RMSEC 0,2329 So that the results showed that the relative errors found between the reference method and the NIR were small and satisfactory. These results are an excellent indication that you can use the NIR to these analyzes, which is quite advantageous, since conventional techniques are time consuming, they spend a lot of reagents and involve a number of professionals, which requires a reasonable runtime while after the validation of the methodology execution using NIR reduces all this time to a few minutes, saving reagents, time and without waste generation, and that this is a non-destructive technique.

Levantamentos epidemiológicos em saúde bucal: análise da metodologia proposta pela Organização Mundial da Saúde

Epidemiological surveys are important for obtaining information on the prevalence and etiology of mouth diseases, since the data collected permit health actions to be planned, performed, and assessed. Methodological uniformity is necessary, however, to maintain reproductibility, validity, and reliability, and to allow national and international comparisons. The initiative of the World Health Organization (WHO) as an advisor in ongoing surveys has been extremely useful, stimulating standardization in all countries. In 1991, a Portuguese version of the 1987 third edition of Oral Health Surveys - basic methods, an instruction manual for performing epidemiological surveys, was published and became a reference for many parts of Brazil and the World. The present analysis found conflicting points in relation to the sample size, calibration of the examiners, and criteria for evaluating oral health and treatment needs. In conclusion, due to the dynamic characteristics of scientific knowledge and, considering the regional differences in relation to the development of oral diseases, we recommend that proposals for standardizing surveys be checked periodically. Other important issues may have not been detected in this analysis, urging a thorough discussion within the dentistry community as a whole.

Levantamentos epidemiológicos em saúde bucal: análise da metodologia proposta pela Organização Mundial da Saúde

Epidemiological surveys are important for obtaining information on the prevalence and etiology of mouth diseases, since the data collected permit health actions to be planned, performed, and assessed. Methodological uniformity is necessary, however, to maintain reproductibility, validity, and reliability, and to allow national and international comparisons. The initiative of the World Health Organization (WHO) as an advisor in ongoing surveys has been extremely useful, stimulating standardization in all countries. In 1991, a Portuguese version of the 1987 third edition of Oral Health Surveys - basic methods, an instruction manual for performing epidemiological surveys, was published and became a reference for many parts of Brazil and the World. The present analysis found conflicting points in relation to the sample size, calibration of the examiners, and criteria for evaluating oral health and treatment needs. In conclusion, due to the dynamic characteristics of scientific knowledge and, considering the regional differences in relation to the development of oral diseases, we recommend that proposals for standardizing surveys be checked periodically. Other important issues may have not been detected in this analysis, urging a thorough discussion within the dentistry community as a whole.

Construção e validação do instrumento de investigação do conhecimento de gestantes sobre sua saúde bucal e a do seu bebê: perspectiva do cuidado em saúde

INTRODUCTION: Humanized and quality prenatal and post-partum care is critical to maternal and newborn health, as well as oral health care. Currently, the National Oral Health Policy is aiming at expanding dental care for pregnant women. Thus, the promotion of oral health and attention to prenatal care policies should be integrated; however, there is still limited participation of pregnant women. Thus, it is necessary to verify the knowledge of pregnant women related to oral health, seeking to estimate the quality of dental care provided during prenatal care, being essential for the Family Health strategy to organize personnel, plan costs and to ensure the quality standard of care. OBJECTIVE: To develop and validate a research instrument on the knowledge of pregnant women about their oral health and of their baby. METHOD: This is a construction and validation study with 93 pregnant women in Family Health Units and specialized private clinics in Obstetrics, in the city of Natal / RN. It was authorized by the Onofre Lopes University Hospital Ethics Committee of the Universidade Federal do Rio Grande do Norte (UFRN) under the registration number 421.163/13. The construction of the instrument followed steps so that it was valid, reliable and sensitive: creation and reduction of the items (drafting of the instrument), content validity and testing of the instrument, and hypotheses validation. Once constructed, the instrument was evaluated by experts who suggested modifications. There was consultation with the target population about the new version of the created instrument, which had the instrument validation verified by internal consistency through intra and inter-calibration and test-retest. Next, the hypotheses were validated. A database was built in the Statistical Package for Social Sciences (SPSS), version 22.0. After creating the hypotheses, an association was found for validating the criteria between each of the specific issues for each established criteria, considering a 5% significance level. Data analysis was carried out by describing the absolute and relative frequencies of the variables pertaining to issues relating to their pregnancy knowledge about their oral health and their baby. The Kappa coefficient was used for the calibration process (Inter and Intra-examiner calibration) and Cronbach's alpha coefficient was used to analyze instrument reproducibility (test-retest). In addition, the chi-square test was used to cross the dependent variable with the (dichotomized) independent variables. RESULTS: The intra and inter agreement analysis presented a Kappa coefficient between 0.400 and 1.000. Internal consistency through the analysis showed that 90% of the instrument's questions showed great reliability in the answers (Cronbach α ˃ 0.7). In the investigation of the relationship between the dependent variable (knowledge about oral health) and the independent variables (trimester of pregnancy, education, income and multiparous), it was found that none of these independent variables were significantly associated. All hypotheses had their Ho confirmed. CONCLUSION: The constructed instrument was validated, considering that it showed to be sensitive with good reliability and good accuracy, and therefore can be used to assess pregnant women’s knowledge about their oral health and the oral health of their baby.

Construção e validação do instrumento de investigação do conhecimento de gestantes sobre sua saúde bucal e a do seu bebê: perspectiva do cuidado em saúde

INTRODUCTION: Humanized and quality prenatal and post-partum care is critical to maternal and newborn health, as well as oral health care. Currently, the National Oral Health Policy is aiming at expanding dental care for pregnant women. Thus, the promotion of oral health and attention to prenatal care policies should be integrated; however, there is still limited participation of pregnant women. Thus, it is necessary to verify the knowledge of pregnant women related to oral health, seeking to estimate the quality of dental care provided during prenatal care, being essential for the Family Health strategy to organize personnel, plan costs and to ensure the quality standard of care. OBJECTIVE: To develop and validate a research instrument on the knowledge of pregnant women about their oral health and of their baby. METHOD: This is a construction and validation study with 93 pregnant women in Family Health Units and specialized private clinics in Obstetrics, in the city of Natal / RN. It was authorized by the Onofre Lopes University Hospital Ethics Committee of the Universidade Federal do Rio Grande do Norte (UFRN) under the registration number 421.163/13. The construction of the instrument followed steps so that it was valid, reliable and sensitive: creation and reduction of the items (drafting of the instrument), content validity and testing of the instrument, and hypotheses validation. Once constructed, the instrument was evaluated by experts who suggested modifications. There was consultation with the target population about the new version of the created instrument, which had the instrument validation verified by internal consistency through intra and inter-calibration and test-retest. Next, the hypotheses were validated. A database was built in the Statistical Package for Social Sciences (SPSS), version 22.0. After creating the hypotheses, an association was found for validating the criteria between each of the specific issues for each established criteria, considering a 5% significance level. Data analysis was carried out by describing the absolute and relative frequencies of the variables pertaining to issues relating to their pregnancy knowledge about their oral health and their baby. The Kappa coefficient was used for the calibration process (Inter and Intra-examiner calibration) and Cronbach's alpha coefficient was used to analyze instrument reproducibility (test-retest). In addition, the chi-square test was used to cross the dependent variable with the (dichotomized) independent variables. RESULTS: The intra and inter agreement analysis presented a Kappa coefficient between 0.400 and 1.000. Internal consistency through the analysis showed that 90% of the instrument's questions showed great reliability in the answers (Cronbach α ˃ 0.7). In the investigation of the relationship between the dependent variable (knowledge about oral health) and the independent variables (trimester of pregnancy, education, income and multiparous), it was found that none of these independent variables were significantly associated. All hypotheses had their Ho confirmed. CONCLUSION: The constructed instrument was validated, considering that it showed to be sensitive with good reliability and good accuracy, and therefore can be used to assess pregnant women’s knowledge about their oral health and the oral health of their baby.

Ajustes de coeficientes integrantes de processos físicos e bioquímicos na autedepuração em curso de água de médio porte

The mathematical modeling in the simulation of self-purification capacity in lotic environment is an important tool in the planning and management of hydric resources in hydrographic basin scale. It satisfactorily deals with the self-purification process when the coefficients of physical and biochemical processes are calibrated from monitorated water quality data, which was the main focus of this study. The present study was conducted to simulate the behavior of the parameters OD, BOD5, total phosphorus, E. coli, ammonia, nitrite, nitrate and the total metals cadmium, chromium, copper, lead and zinc in the Uberabinha’s lower course (with an approximate annual growth flow between 4-35 m3/s), in a stretch of 19 km downstream of the treated effluent release by the WWTP of the city. The modelings, on the present study, show the importance of constant water quality parameters monitoration over the water course, based on the comparison of the simulations from calibrated coefficients and coefficients obtained in the literature for the period of June until November 2015. After coefficients calibration, there were good adjustments between simulated and measured data for the parameters OD, BOD, Ptotal, ammonia and nitrate and unsatisfactory adjust for the parameters nitrite and E. coli. About the total metals, the adjustments were not satisfactory on the reservoir’s vicinity of the Small Hydropower Plant Martins, due the considerable increase of the bottom sediment in lentic region. The greatest scientific contribution of this study was to calibrate the decay coefficient K and the quantification of the release by the fund S of total metals in watercourse midsize WWTP pollutant load receptor, justified by the lack of studies in the literature about the subject. For the metals cadmium, chromium, copper, lead and zinc, the borderline for K and S calibrated were: 0.0 to 13.0 day-1 and 0.0 to 1.7 g/m3.day; 0.0 to 0.9 day-1 and 0.0 to 7.3 g/m3.day; 0.0 to 25.0 day-1 and 0.0 to 1.8 g/m3.day; 0.0 to 7.0 day-1 and 0.0 to 40.3 g/m3.day; 0.0 to 30.0 day-1 and 0.0 to 70.1 g/m3.day.

Preparação e caracterização de biomateriais poliméricos para avaliação da viabilidade de uso como phantom biológico

The theoretical and experimental developments in the biomaterials area have been directly applied to different fields of Medicine (odontology, regenerative medicine and radiotherapy). These advances have focused both for diagnosing diseases such as for quantifying degrees of progression. From the perspective of these studies, biomaterials are being designed and manufactured for application in various areas of science, provided advances in diagnostic radiology, radiotherapy dosimetry and calibration of radiotherapy equipment. Develop a phantom from a biomaterial has become a great ally of medicine in the treat patients with oncological diseases, allowing better performance of the equipment in order to reduce damage to healthy tissue due to excessive exposure to radiation. This work used polymers: chitosan and gelatin, for making the polymeric structures and controlled for different types of production and processing, characterizing and evaluating the biopolymer by physical techniques (STL, SEM and DEI) and therefore analyze applicability as phantom mouse lung. It was possible to evaluate the morphology of biomaterials quantitatively by scanning electron microscopy associated with imaging technique. The relevance of this work focuses on developing a phantom from polymeric biomaterials that can act as phantom providing high image contrast when subjected to analysis. Thus, the choice of DEI technique is satisfactory since it is an imaging technique of X-ray high resolution. The images obtained by DEI have shown the details of the internal microstructure of the biomaterial produced which have ≈ 10 μm dimension. The phantoms had made density ranging from 0.08 a 0.13 g/cm3.

Avaliação da incerteza de medição no Setor Médico-hospitalar

This study aims to evaluate the uncertainty associated with measurements made by aneroid sphygmomanometer, neonatal electronic balance and electrocautery. Therefore, were performing repeatability tests on all devices for the subsequent execution of normality tests using Shapiro-Wilk; identification of influencing factors that affect the measurement result of each measurement; proposition of mathematical models to calculate the measurement uncertainty associated with measuring evaluated for all equipament and calibration for neonatal electronic balance; evaluation of the measurement uncertainty; and development of a computer program in Java language to systematize the calibration uncertainty of estimates and measurement uncertainty. It was proposed and carried out 23 factorial design for aneroid sphygmomanometer order to investigate the effect of temperature factors, patient and operator and another 32 planning for electrocautery, where it investigated the effects of temperature factors and output electrical power. The expanded uncertainty associated with the measurement of blood pressure significantly reduced the extent of the patient classification tracks. In turn, the expanded uncertainty associated with the mass measurement with neonatal balance indicated a variation of about 1% in the dosage of medication to neonates. Analysis of variance (ANOVA) and the Turkey test indicated significant and indirectly proportional effects of temperature factor in cutting power values and clotting indicated by electrocautery and no significant effect of factors investigated for aneroid sphygmomanometer.

Determinação de teor de biodieseis de algodão e pinhão manso em misturas com diesel usando espectroscopia no infravermelho médio e quadrados mínimos parciais

Biodiesel is a renewable fuel derived from vegetable oils or animal fats, which can be a total or partial substitute for diesel. Since 2005, this fuel was introduced in the Brazilian energy matrix through Law 11.097 that determines the percentage of biodiesel added to diesel oil as well as monitoring the insertion of this fuel in market. The National Agency of Petroleum, Natural Gas and Biofuels (ANP) establish the obligation of adding 7% (v/v) of biodiesel to diesel commercialized in the country, making crucial the analytical control of this content. Therefore, in this study were developed and validated methodologies based on the use of Mid Infrared Spectroscopy (MIR) and Multivariate Calibration by Partial Least Squares (PLS) to quantify the methyl and ethyl biodiesels content of cotton and jatropha in binary blends with diesel at concentration range from 1.00 to 30.00% (v/v), since this is the range specified in standard ABNT NBR 15568. The biodiesels were produced from two routes, using ethanol or methanol, and evaluated according to the parameters: oxidative stability, water content, kinematic viscosity and density, presenting results according to ANP Resolution No. 45/2014. The built PLS models were validated on the basis of ASTM E1655-05 for Infrared Spectroscopy and Multivariate Calibration and ABNT NBR 15568, with satisfactory results due to RMSEP (Root Mean Square Error of Prediction) values below 0.08% (<0.1%), correlation coefficients (R) above 0.9997 and the absence of systematic error (bias). Therefore, the methodologies developed can be a promising alternative in the quality control of this fuel.

Argaric Sociology: Sex and Death

The detailed, rich and diverse Argaric funerary record offers an opportunity to explore social dimensions that usually remain elusive for prehistoric research, such us social rules on kinship rights and obligations, sexual tolerance and the role of funerary practices in preserving the economic and political organization. This paper addresses these topics through an analysis of the social meaning of Argaric double tombs by looking at body treatment and composition of grave goods assemblages according to gender and class affiliation. The Argaric seems to have been a conservative society, scarcely tolerant regarding homosexuality, and willing to celebrate ancestry associated to certain places as a means of asserting residence and property rights.

Caracterização geológica e geofísica da área do porto da Figueira da Foz

No âmbito de um projeto realizado para a Administração Portuária do Porto da Figueira da Foz, foram recolhidos dados geofísicos no offshore da costa da Figueira da Foz, utilizando um sistema combinado de sonar de varrimento lateral e de sísmica de alta resolução com o objetivo de compreender a distribuição de sedimentos ao longo do fundo marinho e assim entender melhor a sua origem. Os dados de varrimento lateral foram processados, analisados e representados em mosaicos recorrendo ao software integrado TRINTON Prespective. Foram colhidas 10 amostras de sedimentos de fundo que foram analisadas do ponto de vista granulométrico e que foram usadas para a calibração dos mosaicos do sonar de varrimento lateral de modo a produzir um mapa semi-quantitativo de classificação dos sedimentos de fundo. Os dados de reflexão sísmica foram processados e analisados através dos softwares SPW e RadExPro. Os mapas de sonar de varrimento lateral produzidos (mosaicos) mostram uma relação entre o tamanho de grão e composição dos depósitos de plataforma interna e os processos geológicos que ocorrem na zona costeira adjacente. Também se verifica uma relação entre a orientação da costa e a sua consequente exposição às ondas incidentes, e como isso afeta e altera a distribuição do tamanho grão. Neste contexto, a interpretação combinada dos mosaicos do sonar de varrimento lateral com os dados de granulometria e a batimetria dos sedimentos permitiram uma cartografia interpretativa detalhada da morfologia do mar, uma melhor compreensão do controlo da linha costeira na propagação das ondas e correntes e, por conseguinte, na transferência de sedimento no litoral. Os dados de sísmica permitem ainda verificar a espessura das várias camadas geológicas em profundidade.