Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Natural ventilation and indoor air quality in educational buildings: experimental assessment and improvement strategies

Indoor environmental conditions in classrooms, in particular temperature and indoor air quality, influence students’ health, attitude and performance. In recent years, several studies regarding indoor environmental quality of classrooms were published and natural ventilation proved to have great potential, particularly in southern European climate. This research aimed to evaluate indoor environmental conditions in eight schools and to assess their improvement potential by simple natural ventilation strategies. Temperature, relative humidity and carbon dioxide concentration were measured in 32 classrooms. Ventilation performance of the classrooms was characterized using two techniques, first by fan pressurization measurements of the envelope airtightness and later by tracer gas measurements of the air change rate assuming different envelope conditions. A total of 110 tracer gas measurements were made and the results validated ventilation protocols that were tested afterward. The results of the ventilation protocol implementation were encouraging and, overall, a decrease on the CO2 concentration was observed without modifying the comfort conditions. Nevertheless, additional measurements must be performed for winter conditions.

Conservation and management of exploited shark populations based on reproductive value

Several life history traits of sharks result in juveniles being particularly vulnerable to exploitation. However, population level impacts of harvests on juvenile sharks have not been well quantified. This paper examines a range of harvest strategies, including those targeting juveniles. Reproductive value and yield per recruit are used to compare the harvests, which are represented by Leslie matrix models with a harvest matrix. Two species are used as examples: the short-lived Rhizoprionodon taylori and the long-lived Squalus acanthias. Harvests that maintain a stationary population size cause reproductive values to change in opposing ways, but they remove equal fractions of the population's reproductive potential. A new theorem gives population growth as a function of the fraction of reproductive potential removed by a harvest, a relationship useful for comparing harvests on juveniles and adults. Stochastic projections indicate that the risk of depletion is associated with the fraction of reproductive potential removed annually, a measure which encompasses the information in both the selectivity and the rate of fishing mortality. These results indicate the value of focusing conservation efforts on preserving reproductive potential.

Quantifying recreational shore angling catch and harvest in southern Portugal (north-east Atlantic Ocean): implications for conservation and integrated fisheries management

Recreational shore fishing along 250 km of the south and south-west coast of Portugal was studied based on roving creel and aerial surveys. Surveys were conducted between August 2006 and July 2007, following a stratified random-sampling design and provided information on catch and effort, harvest and discards, angler demographics and fishing habits. Overall, 192 roving creel surveys, 24 aerial surveys and 1321 interviews were conducted. Based on the aerial surveys, a mean +/- s.e. total fishing effort of 705 236 +/- 32 765 angler h year(-1) was estimated, corresponding to 166 430 +/- 9792 fishing trips year(-1). Average time spent per fishing trip was 4.7 h. A total of 48 species, belonging to 22 families, were recorded in roving creel surveys. The most important species was Diplodus sargus, accounting for 44% of the total catches by number and 48% by mass. Estimated mean +/- s.e. total annual recreational shore fishing catch was 160.2 +/- 12.6 t year(-1) (788 049 +/- 54 079 fishes year(-1)), of which 147.4 +/- 11.9 t year(-1) (589 132 +/- 42 360 fishes year(-1)) was retained. Although overall shore-based recreational catches only corresponded to 0.8% of the commercial landings (only common species considered), D. sargus catches by recreational shore anglers were considerable, corresponding to 65% of the commercial landings. The implications of these results for integrated fisheries management and conservation are discussed, and future research proposed.

Trophic signatures of small-scale fishing gears: implications for conservation and management

We quantified the ecosystem effects of small-scale gears operating in southern European waters (Portugal, Spain, Greece), based on a widely accepted ecosystem measure and indicator, the trophic level (TL). We used data from experimental fishing trials during 1997 to 2000. We studied a wide range of gear types and sizes: (1) gill nets of 8 mesh sizes, ranging from 44 to 80 mm; (2) trammel nets of 9 inner panel mesh sizes, ranging from 40 to 140 mm; and (3) longlines of 8 hook sizes, ranging from Nos. 15 (small) to 5 (large). We used the number of species caught per TL class for constructing trophic signatures (i.e. cumulative TL distributions), and estimated the TL at 25, 50 and 75% cumulative frequency (TL25, TL50, TL75) and the slopes using the logistic function. We also estimated the mean weighted TL of the catches (TLW). Our analyses showed that the TL characteristics of longlines varied much more than those of gill and trammel nets. The longlines of large hooks (Nos. 10, 9, 7, 5) were very TL selective, and their trophic signatures had very steep slopes, the highest mean TL50 values, very narrow mean TL25 to TL75 ranges and mean TLW > 4. In addition, the mean number of TL classes exploited was smaller and the mean TL50 and TLW were larger for the longlines of small hooks (Nos. 15, 13, 12, 11) in Greek than in Portuguese waters. Trammel and gill nets caught more TL classes, and the mean slopes of their trophic signatures were significantly smaller than those of longlines as a group. In addition, the mean number of TL classes exploited, the mean TL50 and the TLW of gill nets were significantly smaller than those of trammel nets. We attribute the differences between longlines of small hooks to bait type, and the differences between all gear types to their characteristic species and size-selectivity patterns. Finally, we showed how the slope and the TL50 Of the trophic signatures can be used to characterise different gears along the ecologically 'unsustainable-sustainable' continuum.

The discovery of three lost ‘Salting’ carpets: science as a tool for revealing their history

Thesis presented at the Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, to obtain a Master degree in Conservation and Restoration,Specialization in Textiles

Analysis of early synthetic dyes with HPLC-DAD-MS: an important database for analysis of colorants used in cultural heritage

Presented thesis at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Archaeological roman glasses: comparative characterisation by non-destructive analytical techniques

Dissertation presented in fulfilment of the requirements for the Master’s degree in Conservation and Restoration

Troia Roman baths (Portugal) – Assessment of history of interventions

International Seminar in Conservation. A Tribute to Cesari Brandi. Lisboa, LNEC, May 2006, p.273-282

Estudo da cabeceira da Sé do Porto

Dissertação de mestrado integrado em Engenharia Civil

Diseño de repositorios digitales interoperables

El objetivo de este trabajo es realizar una revisión sobre el estado de la normalización de los diferentes aspectos que hacen factible la interoperabilidad entre repositorios de objetos de aprendizaje.

Memòria d’una indústria desapareguda: la bòbila d’en Soler

En aquest estudi pretenc revalorar el patrimoni cultural, natural i industrial deVilafant. Tot i que les directrius del meu treball, es centren de manera especial enel patrimoni industrial, ja que en aquests moments l’Ajuntament de Vilafant, téespecial interès en potenciar l’estudi de l’activitat rajolera, que va assolir el seumàxim esplendor amb la construcció de la bòbila d’en Soler l’any 1880

Estudi històric i patològic del Mas Vell: rehabilitació del Mas Vell i transformació en centre d’esports d’aventura

L’objectiu que es va marcar abans de començar el projecte, era el de realitzar la rehabilitació del Mas Vell convertint-lo en un centre d’esports d’aventura. Per fer això creiem convenient que abans calia realitzar un estudi de les principals patologies que l’afectaven i de pas, datar la seva construcció i estudiar l’evolució i modificacions que ha patit al llarg dels anys. Per realitzar l’estudi patològic es crearien unes fitxes, localitzant, descrivint, explicant la causa de cada patologia en concret i donant la solució més adequada per reparar cada una d’elles. La rehabilitació del mas es faria pensant amb l’ús immediat que se li donarà, que serà un centre d’esports d’aventura. Les premisses que volíem seguir eren: no augmentar la volumetria que la masia tenia en el moment del seu abandonament, conservar l’aspecte rústic de l’edifici, tant en les parts que es conserven com en les que reconstruïm. Es pensava mantenir l’estructura de fusta de coberta i forjat que es trobés en bon estat. A la zona que estava en ruïnes es pensava construir les parets aterrades amb els mateixos materials originaris

Projecte de rehabilitació del Mas Sitjar de Salt

El motiu principal que ens ha portat a la realització d’aquest treball ha sigut el nostreinterès en el camp de la rehabilitació. També ha influït en aquesta decisió la possibilitat d’accedir a documentació gràfica i històrica, ja que es tracta d’un edifici històric patrimoni del municipi de Salt. Com a coneixedors de l’estat actual de l’edifici s’ha decidit que l’objecte principal del projecte estigui basat en la consolidació estructural, considerant que no hi ha un ús definit, decidim que l’ús serà el que ve definit al CTE com a categoria C (zones d’accés al públic), que és el més desfavorable en quant a sobrecàrregues d’ús. Llavors, la finalitat del projecte és dur a terme la rehabilitació de l’edifici perquè és pugui adaptar a qualsevol ús que se li vulgui donar. Per tant, cal deixar clar que no és objecte redissenyar o redistribuir l’edifici per donar-li un ús concret

Anàlisi del Monestir de Sant Pere de Rodes

Es fa una anàlisi del Monestir de Sant Pere de Rodes, i s'estudia si el monument està ben gestionat. En el cas d'identificar mancances es plantegen estratègies i actuacions de millora de la gestió per tal d'aconseguir un màxim rendiment, tot tenint en compte la sostenibilitat