Indigenous Movements, Democracy, and U.S. Interests in Latin America

Indigenous movements have become increasingly powerful in the last couple of decades and they are now important political actors in some South American countries, such as Bolivia, Ecuador, and, to a lesser extent, Peru and Chile. The rise of indigenous movements has provoked concern among U.S. policymakers and other observers who have feared that these movements will exacerbate ethnic polarization, undermine democracy, and jeopardize U.S. interests in the region. This paper argues that concern over the rise of indigenous movements is greatly exaggerated. It maintains that the rise of indigenous movements has not brought about a market increase in ethnic polarization in the region because most indigenous organizations have been ethnically inclusive and have eschewed violence. Although the indigenous movements have at times demonstrated a lack of regard for democratic institutions and procedures, they have also helped deepen democracy in the Andean region by promoting greater political inclusion and participation and by aggressively combating ethnic discrimination and inequality. Finally, this study suggests that the indigenous population has opposed some U.S. –sponsored initiatives, such as coca eradication and market reform, for legitimate reasons. Such policies have had some negative environmental, cultural, and economic consequences for indigenous people, which U.S. policymakers should try to address. The conclusion provides some specific policy recommendations on how to go about this.

An incident at sea: The historic combat between U.S. Navy Blimp K-74 and U-Boat 134

This thesis studies the historic encounter between United States Navy airship K-74 and Nazi submarine U-134 in World War II. The Battle of the Atlantic is examined through case study of this one U-boat and its voyage. In all things except her fight with the American blimp, the patrol was perfectly typical. Looked at from start to finish, both her reports and the reports of the Allies encountered, many realities of the war can be studied. U-134 sailed to attack shipping between Florida and Cuba. She was challenged by the attack of United States Navy airship K-74 over the Florida Straits. It is the only documented instance of battle between two such combatants in history. That merits attention. Thesis finding disprove historian William Eliot Morison’s contention that the K-74 airship bombs were not dropped and did not damage the U-boat. Study of this U-boat and its antagonist broadens our understanding of the Battle of the Atlantic. It is a contribution to our knowledge of military, naval, aviation, and local history.

Fear and U.S. foreign policy during the Truman administration, 1945-1952

The purpose of this study was to investigate how the Truman administration used fear to generate popular support for its Cold War foreign policies. Three issues were examined through the use of published government documents, personal memoirs, and weekly periodicals to assess the responses of the American public: the enactment of universal military training (UMT), the Soviet detonation of an atomic device, and the Truman administration's decision to build the hydrogen bomb. This study shows that the changing attitudes in the Truman administration toward the Soviet Union occurred in a climate of fear. Through press releases and by exerting influence on the media, the administration attempted to control the information the public received. Through the use of propaganda, the Truman administration pursued the implementation of UMT, generated fear of the Soviet Union after its detonation of the atomic bomb, and gained relative public support for the decision to build the hydrogen bomb.

Medium change monitoring using ambient seismic noise and coda wave interferometry: examples from intraplate NE Brazil and the Mid-Atlantic Ridge

This thesis presents and discusses the results of ambient seismic noise correlation for two different environments: intraplate and Mid-Atlantic Ridge. The coda wave interferometry method has also been tested for the intraplate data. Ambient noise correlation is a method that allows to retrieve the structural response between two receivers from ambient noise records, as if one of the station was a virtual source. It has been largely used in seismology to image the subsurface and to monitor structural changes associated mostly with volcanic eruptions and large earthquakes. In the intraplate study, we were able to detect localized structural changes related to a small earthquake swarm, which main event is mR 3.7, North-East of Brazil. We also showed that the 1-bit normalization and spectral whitening result on the loss of waveform details and that the phase auto-correlation, which is amplitude unbiased, seems to be more sensitive and robust for our analysis of a small earthquake swarm. The analysis of 6 months of data using cross-correlations detect clear medium changes soon after the main event while the auto-correlations detect changes essentially after 1 month. It could be explained by fluid pressure redistribution which can be initiated by hydromechanical changes and opened path ways to shallower depth levels due to later occurring earthquakes. In the Mid-Atlantic Ridge study, we investigate structural changes associated with a mb 4.9 earthquake in the region of the Saint Paul transform fault. The data have been recorded by a single broadband seismic station located at less than 200 km from the Mid-Atlantic ridge. The results of the phase auto-correlation for a 5-month period, show a strong co-seismic medium change followed by a relatively fast post-seismic recovery. This medium change is likely related to the damages caused by the earthquake’s ground shaking. The healing process (filling of the new cracks) that lasted 60 days can be decomposed in two phases, a fast recovery (70% in ~30 days) in the early post-seismic stage and a relatively slow recovery later (30% in ~30 days). In the coda wave interferometry study, we monitor temporal changes of the subsurface caused by the small intraplate earthquake swarm mentioned previously. The method was first validated with synthetics data. We were able to detect a change of 2.5% in the source position and a 15% decrease of the scatterers’ amount. Then, from the real data, we observed a rapid decorrelation of the seismic coda after the mR 3.7 seismic event. This indicates a rapid change of the subsurface in the fault’s region induced by the earthquake.

Medium change monitoring using ambient seismic noise and coda wave interferometry: examples from intraplate NE Brazil and the Mid-Atlantic Ridge

This thesis presents and discusses the results of ambient seismic noise correlation for two different environments: intraplate and Mid-Atlantic Ridge. The coda wave interferometry method has also been tested for the intraplate data. Ambient noise correlation is a method that allows to retrieve the structural response between two receivers from ambient noise records, as if one of the station was a virtual source. It has been largely used in seismology to image the subsurface and to monitor structural changes associated mostly with volcanic eruptions and large earthquakes. In the intraplate study, we were able to detect localized structural changes related to a small earthquake swarm, which main event is mR 3.7, North-East of Brazil. We also showed that the 1-bit normalization and spectral whitening result on the loss of waveform details and that the phase auto-correlation, which is amplitude unbiased, seems to be more sensitive and robust for our analysis of a small earthquake swarm. The analysis of 6 months of data using cross-correlations detect clear medium changes soon after the main event while the auto-correlations detect changes essentially after 1 month. It could be explained by fluid pressure redistribution which can be initiated by hydromechanical changes and opened path ways to shallower depth levels due to later occurring earthquakes. In the Mid-Atlantic Ridge study, we investigate structural changes associated with a mb 4.9 earthquake in the region of the Saint Paul transform fault. The data have been recorded by a single broadband seismic station located at less than 200 km from the Mid-Atlantic ridge. The results of the phase auto-correlation for a 5-month period, show a strong co-seismic medium change followed by a relatively fast post-seismic recovery. This medium change is likely related to the damages caused by the earthquake’s ground shaking. The healing process (filling of the new cracks) that lasted 60 days can be decomposed in two phases, a fast recovery (70% in ~30 days) in the early post-seismic stage and a relatively slow recovery later (30% in ~30 days). In the coda wave interferometry study, we monitor temporal changes of the subsurface caused by the small intraplate earthquake swarm mentioned previously. The method was first validated with synthetics data. We were able to detect a change of 2.5% in the source position and a 15% decrease of the scatterers’ amount. Then, from the real data, we observed a rapid decorrelation of the seismic coda after the mR 3.7 seismic event. This indicates a rapid change of the subsurface in the fault’s region induced by the earthquake.

(Table S1) Uranium and Thorium isotopes and U/Th ages of IODP Exp310 cores from offshore Tahiti

The timing of sea-level change provides important constraints on the mechanisms driving Earth's climate between glacial and interglacial states. Fossil corals constrain the timing of past sea level by their suitability for dating and their growth position close to sea level. The coral-derived age for the last deglaciation is consistent with climate change forced by Northern Hemisphere summer insolation (NHI), but the timing of the penultimate deglaciation is more controversial. We found, by means of uranium/thorium dating of fossil corals, that sea level during the penultimate deglaciation had risen to ~85 meters below the present sea level by 137,000 years ago, and that it fluctuated on a millennial time scale during deglaciation. This indicates that the penultimate deglaciation occurred earlier with respect to NHI than the last deglacial, beginning when NHI was at a minimum.

Biogenic opal, biogenic barium, calcium carbonate and U/Th isotope data from core-top sediments of SONNE cruise SO202 (INOPEX)

Sedimentary proxies used to reconstruct marine productivity suffer from variable preservation and are sensitive to factors other than productivity. Therefore, proxy calibration is warranted. Here we map the spatial patterns of two paleoproductivity proxies, biogenic opal and barium fluxes, from a set of core-top sediments recovered in the Subarctic North Pacific. Comparisons of the proxy data with independent estimates of primary and export production, surface water macronutrient concentrations and biological pCO2 drawdown indicate that neither proxy shows a significant correlation with primary or export productivity for the entire region. Biogenic opal fluxes, when corrected for preservation using 230Th-normalized accumulation rates, show a good correlation with primary productivity along the volcanic arcs (tau = 0.71, p = 0.0024) and with export productivity throughout the western Subarctic North Pacific (tau = 0.71, p = 0.0107). Moderate and good correlations of biogenic barium flux with export production (tau = 0.57, p = 0.0022) and with surface water silicate concentrations (tau = 0.70, p = 0.0002) are observed for the central and eastern Subarctic North Pacific. For reasons unknown, however, no correlation is found in the western Subarctic North Pacific between biogenic barium flux and the reference data. Nonetheless, we show that barite saturation, uncertainty in the lithogenic barium corrections and problems with the reference datasets are not responsible for the lack of a significant correlation between biogenic barium flux and the reference data. Further studies evaluating the factors controlling the variability of the biogenic constituents in the sediments are desirable in this region.

Enviromagnetic, major element, and grain-size analyses of surface sediment samples along the continental margin between East Brazil and Patagonia

Continental margin sediments of SE South America originate from various terrestrial sources, each conveying specific magnetic and element signatures. Here, we aim to identify the sources and transport characteristics of shelf and slope sediments deposited between East Brazil and Patagonia (20°-48°S) using enviromagnetic, major element, and grain-size data. A set of five source-indicative parameters (i.e., chi-fd%, ARM/IRM, S0.3T, SIRM/Fe and Fe/K) of 25 surface samples (16-1805 m water depth) was analyzed by fuzzy c-means clustering and non-linear mapping to depict and unmix sediment-province characteristics. This multivariate approach yields three regionally coherent sediment provinces with petrologically and climatically distinct source regions. The southernmost province is entirely restricted to the slope off the Argentinean Pampas and has been identified as relict Andean-sourced sands with coarse unaltered magnetite. The direct transport to the slope was enabled by Rio Colorado and Rio Negro meltwaters during glacial and deglacial phases of low sea level. The adjacent shelf province consists of coastal loessoidal sands (highest hematite and goethite proportions) delivered from the Argentinean Pampas by wave erosion and westerly winds. The northernmost province includes the Plata mudbelt and Rio Grande Cone. It contains tropically weathered clayey silts from the La Plata Drainage Basin with pronounced proportions of fine magnetite, which were distributed up to ~24° S by the Brazilian Coastal Current and admixed to coarser relict sediments of Pampean loessoidal origin. Grain-size analyses of all samples showed that sediment fractionation during transport and deposition had little impact on magnetic and element source characteristics. This study corroborates the high potential of the chosen approach to access sediment origin in regions with contrasting sediment sources, complex transport dynamics, and large grain-size variability.

Contracting Freedom: Race, Empire, and U.S. Labor Importation Programs, 1942-1964

Thesis (Ph.D.)--University of Washington, 2016-06

Decorative tiles between Brazil and Europe: the case of the Santa Catharina factory

Abstract It was in the first decade of the twentieth century that the first white china Factory was implemented in Brazil. Fruit of the association between the Sao Paulo Aristocracy and the Italian Romeo Ranzini, this factory was responsible for producing significant amounts of crockery in industrial moulds in sao Paulo, Brazil. It was also the first factory to produce decorative tiles that would be part of the architecture of the public buildings built between 1919 and 1922 in Commemoration of the Centennial of the Brazilian Independence. Known as The Santa Catharina Factory, this factory was inaugurated in 1913 with the participation of Italian immigrants and German technologies for the development of its first manufacturing activities. As a result of a number of economic, political and social matters that started in the previous century in the city of Sao Paulo, The Santa Catharina factory played an important role in industrial development as regards the production of national white china and was used as a model for the construction of new ceramic factories in Sao Paulo. After acquired by Matarazzo industries in 1927, had closed their activities in 1937. This research is based on the identification and analysis of the first tiles produced in Brazil by the Santa Catharina Factory, which were part of the architectural decorations of the buildings built in Sao Paulo to the celebration of the Centennial of the Brazilian Independence. Designed by Victor Dubugras, The Largo da Memoria (located in the city of Sao Paulo) and the buildings located in the "Paths of the Sea" road marked the beginning of Brazilian industrialization and the emergence of Neocolonial Movement in architecture of Sao Paulo. Studies of the first national patterns of decorative tiles approach a subject poorly researched by experts in tiled studies in Brazil, although in this case these tiles have represented not only an important milestone in the national industrialization, but also have demarcated the significant changes in architectural and decorative practices in the country in the early twentieth century; RESUMÈ: C'est durant la premiere decennie du XXe siecle que la premiere usine de porcelaine blanche fut implant& au Bresil. Elle fut le fruit de l'association entre l'aristocratie de Sao Paulo et l'italien Romeo Ranzini. L'usine produisait une quantite signifiante de porcelaine sur le territoire industriel de Sao Paulo. Ce fut egalement la premiere usine a produire des carreaux decoratifs qui sont aujourd'hui visibles dans l'architecture des batiments publics construit entre 1919 et 1922, pour la commemoration du centenaire de l'independance bresilienne. Connue sous le nom de Santa Catharina, cette usine fut inaugure en 1912. Elle fut construite par des émigrés Italiens, et utilisa pour la technologie allemande pour so production. En tant que resultat d'un certain nombre de questions economiques, politiques et sociales qui ont &butes durant le siecle precedent dans la ville de Sao Paulo, l'usine Santa Catharina a joue un role important dans le developpement industriel de la production de porcelaine blanche nationale et a ete utilise comme modele pour la construction de nouvelles usines de ceramique a Sao Paulo. Apres avoir ete achete par l'industrie Matarazzo en 1927, elle cessa ses activites en 1937. Cette recherche est basee sur l'identification et l'analyse des premiers carreaux decoratifs fabriques au Bresil par l'usine Santa Catharina, qui etait une partie des decorations architecturales des batiments construits a Sao Paulo pour la celebration du centenaire de l'Independance Bresilienne. Connue par Victor Dubugras, le "Largo da Memoria" (situe dans la ville de Sao Paulo), et les batiments situes sur le "Path of the Sea", ont marque le debut de l'industrialisation bresilienne et l'emergence d'un mouvement neocolonialiste dans l'architecture de Sao Paolo. L'etude des premiers modeles nationaux de carreaux decoratifs est un sujet peut etudie par les experts bresiliens, bien qu'ils furent un jalon importante pour l'industrialisation nationale. Its ont egalement entrains des changements importants dans les pratiques architecturales, et decoratives au sein du pays au XXe siecle. Mots-cles: Ceramique - carreaux decoratifs — L'usine Santa Catharina, Bresil - Production de carreaux; RIASSUNTO: Nel primo decennio del Novecento vide luce la prima fabbrica di ceramica di porcellana in Brasile. Frutto dell'associazione tra l'aristocrazia Paulista e l'italiano Romeo Ranzini, questa fabbrica fu responsabile della produzione di notevoli quantita di ceramica di porcellana mediante stampi industriali nella citta di San Paolo, Brasile. Fu anche la prima fabbrica a produrre azulejos che avrebbero poi fatto parte dell'architettura degli edifici pubblici costruiti tra it 1919 ed it 1922, per la commemorazione del Centenario dell'indipendenza Brasiliana. Conosciuta come Fabbrica di Santa Catharina, questa fu inaugurata nel 1913, con la partecipazione di immigrati italiani e con l'impiego di tecnologie tedesche per lo sviluppo delle sue prime attivita produttive. Risultato di una serie di cambiamenti economici, politici e sociali, che ebbero inizio nel secolo precedente nella citta di San Paolo, la Fabbrica di Santa Catharina svolse un ruolo importante nello sviluppo industriale per quanto riguarda la produzione di ceramica di porcellana nazionale e fu adottata come modello per la costruzione di nuove fabbriche a San Paolo. Successivamente, fu acquisita dalle industrie Matarazzo nel 1927, vedendo poi chiudersi le sue attivita nel 1937. Questa ricerca si basa sull'identificazione e l'analisi dei primi azulejos prodotti in Brasile dalla Fabbrica di Santa Catharina che fecero parte delle decorazioni architettoniche degli edifici costruiti a San Paolo per la commemorazione del Centenario dell'indipendenza Brasiliana. Progettati da Victor Dubugras, it Largo da Mem(Via (situato nella citta di San Paolo) e gli edifici che si trovano nei Caminhos do Mar marcarono l'inizio dell'industrializzazione brasiliana e la nascita del Movimento Neocolonial dell'architettura Paulista. Gli studi dei primi modelli di azulejos nazionali affrontano un argomento poco studiato dagli esperti in azulejaria in Brasile, nonostante rappresentino un importante avvenimento dell'industrializzazione nazionale, ma segnano anche i cambiamenti di significative pratiche architettoniche e decorative nel Paese nel primo Novecento. Parole chiave: Ceramica - porcellana - La fabbrica di Santa Catharina - Produzione di ceramica .

Genetic diversity of Cryptosporidium identified in clinical samples from cities in Brazil and Argentina

The identification and characterisation of Cryptosporidium genotypes and subtypes are fundamental to the study of cryptosporidiosis epidemiology, aiding in prevention and control strategies. The objective was to determine the genetic diversity of Cryptosporidium in samples obtained from hospitals of Rio de Janeiro, Brazil, and Buenos Aires, Argentina. Samples were analysed by microscopy and TaqMan polymerase chain reaction (PCR) assays for Cryptosporidium detection, genotyped by nested-PCR-restriction fragment length polymorphism (RFLP) analysis of the 18S rRNA gene and subtyped by DNA sequencing of the gp60 gene. Among the 89 samples from Rio de Janeiro, Cryptosporidium spp were detected in 26 by microscopy/TaqMan PCR. In samples from Buenos Aires, Cryptosporidium was diagnosed in 15 patients of the 132 studied. The TaqMan PCR and the nested-PCR-RFLP detected Cryptosporidium parvum , Cryptosporidium hominis , and co-infections of both species. In Brazilian samples, the subtypes IbA10G2 and IIcA5G3 were observed. The subtypes found in Argentinean samples were IbA10G2, IaA10G1R4, IaA11G1R4, and IeA11G3T3, and mixed subtypes of Ia and IIa families were detected in the co-infections. C. hominis was the species more frequently detected, and subtype family Ib was reported in both countries. Subtype diversity was higher in Buenos Aires than in Rio de Janeiro and two new subtypes were described for the first time.

Compared trajectories of agro-ecology in Brazil and France: The role of scientists and social movements.

2009