Large-Scale Controlled-Condition Experiment to Evaluate Light Weight Deflectometers for Modulus Determination and Compaction Quality Assurance of Unbound Pavement Materials

Compaction control using lightweight deflectometers (LWD) is currently being evaluated in several states and countries and fully implemented for pavement construction quality assurance (QA) by a few. Broader implementation has been hampered by the lack of a widely recognized standard for interpreting the load and deflection data obtained during construction QA testing. More specifically, reliable and practical procedures are required for relating these measurements to the fundamental material property—modulus—used in pavement design. This study presents a unique set of data and analyses for three different LWDs on a large-scale controlled-condition experiment. Three 4.5x4.5 m2 test pits were designed and constructed at target moisture and density conditions simulating acceptable and unacceptable construction quality. LWD testing was performed on the constructed layers along with static plate loading testing, conventional nuclear gauge moisture-density testing, and non-nuclear gravimetric and volumetric water content measurements. Additional material was collected for routine and exploratory tests in the laboratory. These included grain size distributions, soil classification, moisture-density relations, resilient modulus testing at optimum and field conditions, and an advanced experiment of LWD testing on top of the Proctor compaction mold. This unique large-scale controlled-condition experiment provides an excellent high quality resource of data that can be used by future researchers to find a rigorous, theoretically sound, and straightforward technique for standardizing LWD determination of modulus and construction QA for unbound pavement materials.

Equipment quality control

Mammography equipment must be evaluated to ensure that images will be of acceptable diagnostic quality with lowest radiation dose. Quality Assurance (QA) aims to provide systematic and constant improvement through a feedback mechanism to address the technical, clinical and training aspects. Quality Control (QC), in relation to mammography equipment, comprises a series of tests to determine equipment performance characteristics. The introduction of digital technologies promoted changes in QC tests and protocols and there are some tests that are specific for each manufacturer. Within each country specifi c QC tests should be compliant with regulatory requirements and guidance. Ideally, one mammography practitioner should take overarching responsibility for QC within a service, with all practitioners having responsibility for actual QC testing. All QC results must be documented to facilitate troubleshooting, internal audit and external assessment. Generally speaking, the practitioner’s role includes performing, interpreting and recording the QC tests as well as reporting any out of action limits to their service lead. They must undertake additional continuous professional development to maintain their QC competencies. They are usually supported by technicians and medical physicists; in some countries the latter are mandatory. Technicians and/or medical physicists often perform many of the tests indicated within this chapter. It is important to recognise that this chapter is an attempt to encompass the main tests performed within European countries. Specific tests related to the service that you work within must be familiarised with and adhered too.

Recommendations for in-situ data Near Real Time Quality Control

With the construction of operational oceanography systems, the need for real-time has become more and more important. A lot of work had been done in the past, within National Data Centres (NODC) and International Oceanographic Data and Information Exchange (IODE) to standardise delayed mode quality control procedures. Concerning such quality control procedures applicable in real-time (within hours to a maximum of a week from acquisition), which means automatically, some recommendations were set up for physical parameters but mainly within projects without consolidation with other initiatives. During the past ten years the EuroGOOS community has been working on such procedures within international programs such as Argo, OceanSites or GOSUD, or within EC projects such as Mersea, MFSTEP, FerryBox, ECOOP, and MyOcean. In collaboration with the FP7 SeaDataNet project that is standardizing the delayed mode quality control procedures in NODCs, and MyOcean GMES FP7 project that is standardizing near real time quality control procedures for operational oceanography purposes, the DATA-MEQ working group decided to put together this document to summarize the recommendations for near real-time QC procedures that they judged mature enough to be advertised and recommended to EuroGOOS.

Genetic variation in growth and wood-quality traits of Corymbia citriodora subsp. variegata across three sites in south-east Queensland, Australia

Ten growth or wood-quality traits were assessed in three nearby Corymbia citriodora subsp. variegata (CCV) open-pollinated family-within-provenance trials (18 provenances represented by a total of 374 families) to provide information for the development of a breeding program targeting both pulp and solid-wood products. Growth traits (diameter at breast high over bark [DBH], height and conical volume) were assessed at 3 and 7 years of age. Wood-quality traits (density [DEN], Kraft pulp yield [KPY], modulus of elasticity [MoE] and microfibril angle [MfA]) were predicted using near-infrared spectroscopy on wood samples collected from these trials when aged between 10 and 12 years. The high average KPY, DEN and MoE, and low average MfA observed indicates CCV is very suitable for both pulp and timber products. All traits were under moderate to strong genetic control. In across- trials analyses, high (>0.4) heritability estimates were observed for height, DEN, MoE and MfA, while moderate heritability estimates (0.24 to 0.34) were observed for DBH, volume and KPY. Most traits showed very low levels of genotype × site interaction. Estimated age–age genetic correlations for growth traits were strong at both the family (0.97) and provenance (0.99) levels. Relationships among traits (additive genetic correlation estimates) were favourable, with strong and positive estimates between growth traits (0.84 to 0.98), moderate and positive values between growth and wood-quality traits (0.32 to 0.68), moderate and positive between KPY and MoE (0.64), and high and positive between DEN and MoE (0.82). However, negative (but favourable) correlations were detected between MfA and all other evaluated traits (−0.31 to −0.96). The genetic correlation between the same trait expressed on two different sites, at family level, ranged from 0.24 to 0.42 for growth traits, and from 0.29 to 0.53 for wood traits. Therefore simultaneous genetic improvement of growth and wood property traits in CCV for the target environment in south-east Queensland should be possible, given the moderate to high estimates of heritability and favourable correlations amongst all traits studied, unless genotype × site interactions are greater than was evident. © 2016 NISC (Pty) Ltd

Bone Mass and Bone Quality Are Altered by Hypoactivity in the Chicken

International audience

Argo quality control manual for dissolved oxygen concentration

This document is the Argo quality control manual for Dissolved oxygen concentration. It describes two levels of quality control: • The first level is the real-time system that performs a set of agreed automatic checks. • Adjustment in real-time can also be performed and the real-time system can evaluate quality flags for adjusted fields • The second level is the delayed-mode quality control system.

Copernicus In Situ TAC, Real Time Quality Control for WAVES

In April 2017, CMEMS plans to launch the WAVES NRT products. This document is focused in the automatic RTQC of the collected wave data. The validation procedure includes the delayed mode quality control of the data and will be specified in another guideline. To perform any kind of quality control to wave data, first it’s necessary to know the nature of the measurements and the analysis performed to those measurements to obtain the wave parameters. For that reason next chapter is dedicated to show the usual wave analysis and the different parameters and estimators obtained.

Effects of different intensity of early leaf removal on vegetative and productive activity and grape quality (cv. Nero d'Avola, Vitis vinifera)

Mestrado Vinifera Euromaster - Instituto Superior de Agronomia - UL

Design of a new laboratory for quality control of mussel produced in Sagres

Dissertação de mestrado, Qualidade em Análises, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Evaporation, seepage and water quality management in storage dams: a review of research methods

One of the most significant sources of water wastage in Australia is loss from small storage dams, either by seepage or evaporation. Over much of Australia, evaporative demand routinely exceeds precipitation. This paper outlines first, methodologies and measurement techniques to quantify the rate of evaporative loss from fresh water storages. These encompass high-accuracy water balance monitoring; determination of the validity of alternative estimation equations, in particular the FAO56 Penman- Monteith ETo methodology; and the commencement of CFD modeling to determine a 'dam factor' in relation to practical atmospheric measurement techniques. Second, because the application of chemical monolayers is the only feasible alternative to the high cost of physically covering the storages to retard evaporation, the use of cetyl alcohol-based monolayers is reviewed, and preliminary research on their degradation by photolytic action, by wind break-up and by microbial degradation reported. Similarly, preliminary research on monolayer visualisation techniques for field application is reported; and potential enhancement of monolayers by other chemicals and attendant water quality issues are considered.

Xylanolytic modification in wheat flour and its effect on dough rheological characteristics and bread quality attributes

Effects of various xylanase treatments applied at different stages of bread making process on dough rheological characteristics and bread quality attributes were investigated. Different doses (200, 400, 600, 800, and 1000 IU) of purified enzyme were applied at two stages (tempering and mixing). In milling and dough making processes, both types of flour (subjected to enzyme treatment during tempering and flour mixing) exhibited decreasing trend in water absorption, dough development time, dough stability, softening of dough, dough mixing time, viscosity peak, set back, and increasing tendency in peak height and pasting temperature. Treatments during tempering resulted in more significant effects as compared to applications during flour mixing. The dough rising during proofing resulted in enhancement from 137±3.21% (control) to maximum value (192.33±2.90%), when 600 IU of xylanases were applied to 1 kg of wheat grains during tempering. The bread sensory attributes also exhibited significant improvement in response to various doses of purified enzymes.

Quality concerns in large-scale and complex software-intensive systems

Software quality management (SQM) is the collection of all processes that ensure that software products, services, and life cycle process implementations meet organizational software quality objectives and achieve stakeholder satisfaction. SQM comprises three basic subcategories: software quality planning, software quality assurance (SQA), and software quality control and software process improvement. This chapter provides a general overview of the SQA domain and discuss the related concept. A conceptual model for software quality framework is provided together with the current approaches for SQA. The chapter concludes with some of the identified challenges and future challenges regarding SQA.

Electronic states of trans-polyacetylene, poly(p-phenylene vinylene) and sp-hybridised carbon species in amorphous hydrogenated carbon probed by resonant Raman scattering

Inclusions of sp-hybridised, trans-polyacetylene [trans-(CH)x] and poly(p-phenylene vinylene) (PPV) chains are revealed using resonant Raman scattering (RRS) investigation of amorphous hydrogenated carbon (a-C:H) films in the near IR – UV range. The RRS spectra of trans-(CH)x core Ag modes and the PPV CC-H phenylene mode are found to transform and disperse as the laser excitation energy ћωL is increased from near IR through visible to UV, whereas sp-bonded inclusions only become evident in UV. This is attributed to ћωL probing of trans-(CH)x chain inhomogeneity and the distribution of chains with varying conjugation length; for PPV to the resonant probing of phelynene ring disorder; and for sp segments, to ћωL probing of a local band gap of end-terminated polyynes. The IR spectra analysis confirmed the presence of sp, trans-(CH)x and PPV inclusions. The obtained RRS results for a-C:H denote differentiation between the core Ag trans-(CH)x modes and the PPV phenylene mode. Furthermore, it was found that at various laser excitation energies the changes in Raman spectra features for trans-(CH)x segments included in an amorphous carbon matrix are the same as in bulk trans-polyacetylene. The latter finding can be used to facilitate identification of trans-(CH)x in the spectra of complex carbonaceous materials.

Maternal support for autonomy : relationships with persistence for children with Down syndrome and typically developing children

Maternal behaviors and child mastery behaviors were examined in 25 children with Down syndrome and 43 typically developing children matched for mental age (24–36 months). During a shared problem-solving task, there were no group differences in maternal directiveness or support for autonomy, and mothers in the two groups used similar verbal strategies when helping their child. There were also no group differences in child mastery behaviors, measured as persistence with two optimally challenging tasks. However, the two groups differed in the relationships of maternal style with child persistence. Children with Down syndrome whose mothers were more supportive of their autonomy in the shared task displayed greater persistence when working independently on a challenging puzzle, while children of highly directive mothers displayed lower levels of persistence. For typically developing children, persistence was unrelated to maternal style, suggesting that mother behaviors may have different causes or consequences in the two groups.

Development of a colorimetric assay for heparanase activity suitable for kinetic analysis and inhibitor screening

The role that heparanase plays during metastasis and angiogenesis in tumors makes it an attractive target for cancer therapeutics. Despite this enzyme’s significance, most of the assays developed to measure its activity are complex. Moreover, they usually rely on labeling variable preparations of the natural substrate heparan sulfate, making comparisons across studies precarious. To overcome these problems, we have developed a convenient assay based on the cleavage of the synthetic heparin oligosaccharide fondaparinux. The assay measures the appearance of the disaccharide product of heparanase-catalyzed fondaparinux cleavage colorimetrically using the tetrazolium salt WST-1. Because this assay has a homogeneous substrate with a single point of cleavage, the kinetics of the enzyme can be reliably characterized, giving a Km of 46 μM and a kcat of 3.5 s−1 with fondaparinux as substrate. The inhibition of heparanase by the published inhibitor, PI-88, was also studied, and a Ki of 7.9 nM was determined. The simplicity and robustness of this method, should, not only greatly assist routine assay of heparanase activity but also could be adapted for high-throughput screening of compound libraries, with the data generated being directly comparable across studies.