Telemedicine for new neurological outpatients: putting a randomized controlled trial in the context of everyday practice

In a retrospective review, the telemedical management of 65 outpatients from a randomized controlled trial (RCT) of telemedicine for non-urgent referrals to a consultant neurologist was compared with the management of 76 patients seen face to face in the same trial, with that of 150 outpatients seen in the neurology clinics of district general hospitals and with that of 102 neurological outpatients seen by general physicians. Outcome measures were the numbers of investigations and of patient reviews. The telemedicine group did not differ significantly from the 150 patients seen face to face by neurologists in hospital clinics in terms of either the number of investigations or the number of reviews they received. Patients from the RCT seen face to face had significantly fewer investigations but a similar number of reviews to the other 150 patients seen face to face by neurologists (the disparity in the number of investigations may explain the negative result for telemedicine in that RCT). Patients with neurological symptoms assessed by general physicians had significantly more investigations and were reviewed significantly more often than all the other groups. Patients from the RCT seen by telemedicine were not managed significantly differently from those seen face to face by neurologists in hospital clinics but had significantly fewer investigations and follow-ups than those patients managed by general physicians. The results suggest that management of new neurological outpatients by neurologists using telemedicine is similar to that by neurologists using a face-to-face consultation, and is more efficient than management by general physicians.

A review of guidelines and standards for telemedicine

We conducted a review to establish the range and scope of current telemedicine guidelines and standards. Published guidelines were identified by searching the Medline and Telemedicine Information Exchange (TIE) databases, and by performing a Google search using the term 'telemedicine guidelines'. Three types of guidelines were identified, namely clinical, operational and technical. Clinical guidelines included those for teleradiology, telepsychiatry, home telenursing, minor injuries telemedicine, surgical telemedicine, teledermatology and telepathology. Operational guidelines included those for email communication, Internet access and videoconferencing. Technical guidelines included those from the American Telemedicine Association and the US Office for the Advancement of Telehealth. The main standards relevant to telemedicine include those of the International Telecommunication Union and the DICOM standard. The scarcity of guidelines and standards suggests that telemedicine is not yet near to routine use. If an international telemedicine organization were to take responsibility for defining guidelines, under the direction of clinicians with appropriate telemedicine experience, this might speed up their development.

Porphyrins as early biomarkers for arsenic exposure in animals and humans

We studied the effect of arsenic exposure on the haem biosynthetic pathway in the rat and humans. Significant increases in protoporphyrin IX, coproporphyrin III, coproporphyrin I were observed in the blood, liver and kidney, and in the urine of rats after a single dose of arsenic. The level of increase was dependent on the arsenic species present. Most of porphyrin concentrations in the tissues increased within 24 hr and urinary excretion elevated within 48 hr. In the human study, we collected urine samples from 113 people who live in Xing Ren of Guizhou Province, a coal-borne arsenicosis endemic area in southwest of PR China and from 30 people who live in Xing Yi (about 80 km southwest of Xing Ren) where arsenicosis is not prevalent. We analyzed the urinary porphyrins using HPLC. Results indicate that all urinary porphyrins were higher in the arsenic exposed group than those in the control group. Women, children and older age people spend much of their time indoors, they had greater increases of urinary arsenic and porphyrins. They were the higher risk groups among the study subjects. A positive correlation between the urinary arsenic levels and porphyrin concentrations demonstrated the effect of arsenic on haem biosynthesis. Significant alteration in the porphyrin excretion profiles of the younger age (

Future contributions of crop modelling - from heuristics and supporting decision making to understanding genetic regulation and aiding crop improvement

Crop modelling has evolved over the last 30 or so years in concert with advances in crop physiology, crop ecology and computing technology. Having reached a respectable degree of acceptance, it is appropriate to review briefly the course of developments in crop modelling and to project what might be major contributions of crop modelling in the future. Two major opportunities are envisioned for increased modelling activity in the future. One opportunity is in a continuing central, heuristic role to support scientific investigation, to facilitate decision making by crop managers, and to aid in education. Heuristic activities will also extend to the broader system-level issues of environmental and ecological aspects of crop production. The second opportunity is projected as a prime contributor in understanding and advancing the genetic regulation of plant performance and plant improvement. Physiological dissection and modelling of traits provides an avenue by which crop modelling could contribute to enhancing integration of molecular genetic technologies in crop improvement. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

Modernity Contextualises New Zealand's Royal Commission on Genetic Modification: A Discourse Analysis

The New Zealand's Royal Commission on Genetic Modification (RCGM)'s report was released in the year 2001. RCGM's findings supports the ongoing development of genetic engineering in New Zealand and recommends the recommencement of genetic modification field trials.

Investigation of ultrasonic properties of PAG and MAGIC polymer gel dosimeters

Ultrasonic speed of propagation and attenuation were investigated as a function of absorbed radiation dose in PAG and MAGIC polymer gel dosimeters. Both PAG and MAGIC gel dosimeters displayed a dependence of ultrasonic parameters on absorbed dose with attenuation displaying significant changes in the dose range investigated. The ultrasonic attenuation dose sensitivity at 4 MHz in MAGIC gels was determined to be 4.7 +/- 0.3 dB m(-1) Gy(-1) and for PAG 3.9 +/- 0.3 dB m(-1) Gy(-1). Ultrasonic speed dose sensitivities were 0.178 +/- 0.006 m s(-1) Gy(-1) for MAGIC gel and -0.44 +/- 0.02 m s(-1) Gy(-1) for PAG. Density and compressional elastic modulus were investigated to explain the different sensitivities of ultrasonic speed to radiation for PAG and MAGIC gels. The different sensitivities were found to be due to differences in the compressional elastic modulus as a function of dose for the two formulations. To understand the physical phenomena underlying the increase in ultrasonic attenuation with dose, the viscoelastic properties of the gels were studied. Results suggest that at ultrasonic frequencies, attenuation in polymer gel dosimeters is primarily due to volume viscosity. It is concluded that ultrasonic attenuation significantly increases with absorbed dose. Also, the ultrasonic speed in polymer gel dosimeters is affected by changes in dosimeter elastic modulus that are likely to be a result of polymerization. It is suggested that ultrasound is a sufficiently sensitive technique for polymer gel dosimetry.

Application of the Williams-Landel-Ferry model to the viscosity-temperature relationship of Australian honeys

The rheological behaviour of nine unprocessed Australian honeys was investigated for the applicability of the Williams-Landel-Ferry (WLF) model. The viscosity of the honeys was obtained over a range of shear rates (0.01-40 s(-1)) from 2degrees to 40 degreesC, and all the honeys exhibited Newtonian behaviour with viscosity reducing as the temperature was increased. The honeys with high moisture were of lower viscosity, The glass transition temperatures of the honeys, as measured with a differential scanning calorimeter (DSC), ranged from -40degrees to -46 degreesC, and four models (WLF. Arrhenius, Vogel-Tammann-Fulcher (VTF), and power-law) were investigated to describe the temperature dependence of the viscosity. The WLF was the most suitable and the correlation coefficient averaged 0.999 +/- 0.0013 as against 0.996 +/- 0.0042 for the Arrhenius model while the mean relative deviation modulus was 0-12% for the WLF model and 10-40% for the Arrhenius one. With the universal values for the WLF constants, the temperature dependence of the viscosity was badly predicted. From non-linear regression analysis, the constants of the WLF models for the honeys were obtained (C-1 = 13.7-21.1: C-2 = 55.9-118.7) and are different from the universal values. These WLF constants will be valuable for adequate modeling of the rheology of the honeys, and they can be used to assess the temperature sensitivity of the honeys. (C) 2002 Elsevier Science Ltd. All rights reserved.

MR image-based measurement of rates of change in volumes of brain structures. Part 1: Method and validation

A detailed analysis procedure is described for evaluating rates of volumetric change in brain structures based on structural magnetic resonance (MR) images. In this procedure, a series of image processing tools have been employed to address the problems encountered in measuring rates of change based on structural MR images. These tools include an algorithm for intensity non-uniforniity correction, a robust algorithm for three-dimensional image registration with sub-voxel precision and an algorithm for brain tissue segmentation. However, a unique feature in the procedure is the use of a fractional volume model that has been developed to provide a quantitative measure for the partial volume effect. With this model, the fractional constituent tissue volumes are evaluated for voxels at the tissue boundary that manifest partial volume effect, thus allowing tissue boundaries be defined at a sub-voxel level and in an automated fashion. Validation studies are presented on key algorithms including segmentation and registration. An overall assessment of the method is provided through the evaluation of the rates of brain atrophy in a group of normal elderly subjects for which the rate of brain atrophy due to normal aging is predictably small. An application of the method is given in Part 11 where the rates of brain atrophy in various brain regions are studied in relation to normal aging and Alzheimer's disease. (C) 2002 Elsevier Science Inc. All rights reserved.

A design method for superconducting MRI magnets with ferromagnetic material

The emphasis of this work is on the optimal design of MRI magnets with both superconducting coils and ferromagnetic rings. The work is directed to the automated design of MRI magnet systems containing superconducting wire and both `cold' and `warm' iron. Details of the optimization procedure are given and the results show combined superconducting and iron material MRI magnets with excellent field characteristics. Strong, homogeneous central magnetic fields are produced with little stray or external field leakage. The field calculations are performed using a semi-analytical method for both current coil and iron material sources. Design examples for symmetric, open and asymmetric clinical MRI magnets containing both superconducting coils and ferromagnetic material are presented.

Finite difference time domain (FDTD) method for modeling the effect of switched gradients on the human body in MRI

Numerical modeling of the eddy currents induced in the human body by the pulsed field gradients in MRI presents a difficult computational problem. It requires an efficient and accurate computational method for high spatial resolution analyses with a relatively low input frequency. In this article, a new technique is described which allows the finite difference time domain (FDTD) method to be efficiently applied over a very large frequency range, including low frequencies. This is not the case in conventional FDTD-based methods. A method of implementing streamline gradients in FDTD is presented, as well as comparative analyses which show that the correct source injection in the FDTD simulation plays a crucial rule in obtaining accurate solutions. In particular, making use of the derivative of the input source waveform is shown to provide distinct benefits in accuracy over direct source injection. In the method, no alterations to the properties of either the source or the transmission media are required. The method is essentially frequency independent and the source injection method has been verified against examples with analytical solutions. Results are presented showing the spatial distribution of gradient-induced electric fields and eddy currents in a complete body model.

Rapid field calculations for the effect of ferromagnetic material in MRI magnet design

Magnetic resonance imaging (MRI) magnets have very stringent constraints on the homogeneity of the static magnetic field that they generate over desired imaging regions. The magnet system also preferably generates very little stray field external to its structure, so that ease of siting and safety are assured. This work concentrates on deriving, means of rapidly computing the effect of 'cold' and 'warm' ferromagnetic material in or around the superconducting magnet system, so as to facilitate the automated design of hybrid material MR magnets. A complete scheme for the direct calculation of the spherical harmonics of the magnetic field generated by a circular ring of ferromagnetic material is derived under the conditions of arbitrary external magnetizing fields. The magnetic field produced by the superconducting coils in the system is computed using previously developed methods. The final, hybrid algorithm is fast enough for use in large-scale optimization methods. The resultant fields from a practical example of a 4 T, clinical MRI magnet containing both superconducting coils and magnetic material are presented.

A review on the role of duckweed in nutrient reclamation and as a source of animal feed

The family of lemnacae colloquially known as duckweed contains the world's smallest species of flowering plants (macrophytes). Aquatic and free-floating, their most striking qualities are a capacity for explosive reproduction and an almost complete lack of fibrous material. They are widely used for reducing chemical loading in facultative sewage lagoons, but their greatest potential lies in their ability to produce large quantities of protein rich biomass, suitable for feeding to a wide range of animals, including fish, poultry and cattle. Despite these qualities there are numerous impediments to these plants being incorporated into western farming systems. Large genetically determined variations in growth in response to nutrients and climate, apparent anti-nutritional factors, concerns about sequestration of heavy metals and possible transference of pathogens raise questions about the safety and usefulness of these plants. A clear understanding of how to address and overcome these impediments needs to be developed before duckweed is widely accepted for nutrient reclamation and as a source of animal feed.