Social Structural Effects on the Level and Development of the Individual Experience of Anomie in the German Population

Can one observe an increasing level of individual lack of orientation because of rapid social change in modern societies? This question is examined using data from a representative longitudinal survey in Germany conducted in 2002–04. The study examines the role of education, age, sex, region (east/west), and political orientation for the explanation of anomia and its development. First we present the different sources of anomie in modern societies, based on the theoretical foundations of Durkheim and Merton, and introduce the different definitions of anomia, including our own cognitive version. Then we deduce several hypotheses from the theory, which we test by means of longitudinal data for the period 2002–04 in Germany using the latent growth curve model as our statistical method. The empirical findings show that all the sociodemographic variables, including political orientation, are strong predictors of the initial level of anomia. Regarding the development of anomia over time (2002–04), only the region (west) has a significant impact. In particular, the results of a multi-group analysis show that western German people with a right-wing political orientation become more anomic over this period. The article concludes with some theoretical implications.

Strong Down-Valley Low-Level Jets over the Atacama Desert: Observational Characterization

The near-surface wind and temperature regime at three points in the Atacama Desert of northern Chile is described using two-year multi-level measurements from 80-m towers located in an altitude range between 2100 and 2700 m ASL. The data reveal the frequent development of strong nocturnal drainage flows at all sites. Down-valley nose-shaped wind speed profiles are observed with maximum values occurring at heights between 20 m and 60 m AGL. The flow intensity shows considerable inter-daily variability and a seasonal modulation of maximum speeds, which in the cold season can attain hourly average values larger than 20 m s−1. Turbulent mixing appears significant over the full tower layer, affecting the curvature of the nighttime temperature profile and possibly explaining the observed increase of surface temperatures in the down-valley direction. Nocturnal valley winds and temperatures are weakly controlled by upper-air conditions observed at the nearest aerological station. Estimates of terms in the momentum budget for the development and the quasi-stationary phases of the down-valley flows suggest that the pressure gradient force due to the near-surface cooling along the sloping valley axes plays an important role in these drainage flows. A scale for the jet nose height of equilibrium turbulent down-slope jets is proposed, based on surface friction velocity and surface inversion intensity. At one of the sites this scale explains about 70% of the case-to-case observed variance of jet nose heights. Further modeling and observational work is needed, however, in order to better define the dynamics, extent and turbulence structure of this flow system, which has significant wind-energy, climatic and environmental implications.

Ecosystem service trade-offs and stakeholder claims - a meso-scale study from a Madagascar biodiversity hotspot

The north-eastern escarpment of Madagascar has been labelled a global biodiversity hotspot due to its extremely high rates of endemic species which are heavily threatened by accelerated deforestation rates and landscape change. The traditional practice of shifting cultivation or "tavy" used by the majority of land users in this area to produce subsistence rice is commonly blamed for these threats. A wide range of stakeholders ranging from conservation to development agencies, and from the private to the public sector has therefore been involved in trying to find solutions to protect the remaining forest fragments and to increase agricultural production. Consequently, provisioning, regulating and socio-cultural services of this forest-mosaic landscape are fundamentally altered leading to trade-offs between them and consequently new winners and losers amongst the stakeholders at different scales. However, despite a growing amount of evidence from case studies analysing local changes, the regional dynamics of the landscape and their contribution to such trade-offs remain poorely understood. This study therefore aims at using generalised landscape units as a base for the assessment of multi-level stakeholder claims on ecosystem services to inform negotiation, planning and decision making at a meso-scale. The presented study applies a mixed-method approach combining remote sensing, GIS and socio-economic methods to reveal current landscape dynamics, their change over time and the corresponding ecosystem service trade-offs induced by diverse stakeholder claims on the regional level. In a first step a new regional land cover classification for three points in time (1995, 2005 and 2011) was conducted including agricultural classes characteristic for shifting cultivation systems. Secondly, a novel GIS approach, termed “landscape mosaics approach” originally developed to assess dynamics of shifting cultivation landscapes in Laos was applied. Through this approach generalised landscape mosaics were generated allowing for a better understanding of changes in land use intensities instead of land cover. As a next step we will try to use these landscape units as proxies to map provisioning and regulating ecosystem services throughout the region. Through the overlay with other regional background data such as accessibility and population density and information from a region-wide stakeholder analysis, multiscale trade-offs between different services will be highlighted. The trade-offs observed on the regional scale will then be validated through a socio-economic ground-truthing within selected sites at the local scale. We propose that such meso-scale knowledge is required by all stakeholders involved in decision making towards sustainable development of north-eastern Madagascar.

A multi-model comparison of Atlantic multidecadal variability

A multi-model analysis of Atlantic multidecadal variability is performed with the following aims: to investigate the similarities to observations; to assess the strength and relative importance of the different elements of the mechanism proposed by Delworth et al. (J Clim 6:1993–2011, 1993) (hereafter D93) among coupled general circulation models (CGCMs); and to relate model differences to mean systematic error. The analysis is performed with long control simulations from ten CGCMs, with lengths ranging between 500 and 3600 years. In most models the variations of sea surface temperature (SST) averaged over North Atlantic show considerable power on multidecadal time scales, but with different periodicity. The SST variations are largest in the mid-latitude region, consistent with the short instrumental record. Despite large differences in model configurations, we find quite some consistency among the models in terms of processes. In eight of the ten models the mid-latitude SST variations are significantly correlated with fluctuations in the Atlantic meridional overturning circulation (AMOC), suggesting a link to northward heat transport changes. Consistent with this link, the three models with the weakest AMOC have the largest cold SST bias in the North Atlantic. There is no linear relationship on decadal timescales between AMOC and North Atlantic Oscillation in the models. Analysis of the key elements of the D93 mechanisms revealed the following: Most models present strong evidence that high-latitude winter mixing precede AMOC changes. However, the regions of wintertime convection differ among models. In most models salinity-induced density anomalies in the convective region tend to lead AMOC, while temperature-induced density anomalies lead AMOC only in one model. However, analysis shows that salinity may play an overly important role in most models, because of cold temperature biases in their relevant convective regions. In most models subpolar gyre variations tend to lead AMOC changes, and this relation is strong in more than half of the models.

Association between intraoperative electroencephalographic suppression and postoperative mortality

BACKGROUND Low bispectral index values frequently reflect EEG suppression and have been associated with postoperative mortality. This study investigated whether intraoperative EEG suppression was an independent predictor of 90 day postoperative mortality and explored risk factors for EEG suppression. METHODS This observational study included 2662 adults enrolled in the B-Unaware or BAG-RECALL trials. A cohort was defined with >5 cumulative minutes of EEG suppression, and 1:2 propensity-matched to a non-suppressed cohort (≤5 min suppression). We evaluated the association between EEG suppression and mortality using multivariable logistic regression, and examined risk factors for EEG suppression using zero-inflated mixed effects analysis. RESULTS Ninety day postoperative mortality was 3.9% overall, 6.3% in the suppressed cohort, and 3.0% in the non-suppressed cohort {odds ratio (OR) [95% confidence interval (CI)]=2.19 (1.48-3.26)}. After matching and multivariable adjustment, EEG suppression was not associated with mortality [OR (95% CI)=0.83 (0.55-1.25)]; however, the interaction between EEG suppression and mean arterial pressure (MAP) <55 mm Hg was [OR (95% CI)=2.96 (1.34-6.52)]. Risk factors for EEG suppression were older age, number of comorbidities, chronic obstructive pulmonary disease, and higher intraoperative doses of benzodiazepines, opioids, or volatile anaesthetics. EEG suppression was less likely in patients with cancer, preoperative alcohol, opioid or benzodiazepine consumption, and intraoperative nitrous oxide exposure. CONCLUSIONS Although EEG suppression was associated with increasing anaesthetic administration and comorbidities, the hypothesis that intraoperative EEG suppression is a predictor of postoperative mortality was only supported if it was coincident with low MAP. CLINICAL TRIAL REGISTRATION NCT00281489 and NCT00682825.

Cultural convergences in world wine consumption

This paper addresses the dynamics of world wine consumption over the past 50 years in 26 countries, verifying whether or not there is a macro-tendency towards a common consumption style, despite differences in taxation, economic policies and distribution systems among countries. From an empirical point of view, the σ and β convergence hypotheses were formally tested. Model results confirm the existence of both types of convergences. Per capita consumption of wine first experienced a reduction in differences between countries and then converged toward a central value. "Traditional" countries, with historically high levels of consumption, showed a decrease in wine consumption, while emerging countries with historically lower consumption levels showed an increase. These findings not only provide further support to the theory of international convergence of wine consumption on a volume basis, as already observed by other researchers in the European market, but they also offer support for the theory in major world markets. Furthermore, convergence appears to be happening not only at a quantitative level but at qualitative level as well, and this phenomenon may very well reflect the changing tastes of worldwide consumers towards a generalized structure of wine consumption.

Freshwater mesocosm experiment 2012 in Vancouver, Canada on effects of increased temperature and food chain length on oxygen fluxes and plankton community structure

Over broad thermal gradients, the effect of temperature on aerobic respiration and photosynthesis rates explains variation in community structure and function. Yet for local communities, temperature dependent trophic interactions may dominate effects of warming. We tested the hypothesis that food chain length modifies the temperature-dependence of ecosystem fluxes and community structure. In a multi-generation aquatic food web experiment, increasing temperature strengthened a trophic cascade, altering the effect of temperature on estimated mass-corrected ecosystem fluxes. Compared to consumer-free and 3-level food chains, grazer-algae (2-level) food chains responded most strongly to the temperature gradient. Temperature altered community structure, shifting species composition and reducing zooplankton density and body size. Still, food chain length did not alter the temperature dependence of net ecosystem fluxes. We conclude that locally, food chain length interacts with temperature to modify community structure, but only temperature, not food chain length influenced net ecosystem fluxes.

Utilizing the Internet of Things to promote energy awareness and efficiency at discrete production processes: Practices and methodology

El actual contexto de fabricación, con incrementos en los precios de la energía, una creciente preocupación medioambiental y cambios continuos en los comportamientos de los consumidores, fomenta que los responsables prioricen la fabricación respetuosa con el medioambiente. El paradigma del Internet de las Cosas (IoT) promete incrementar la visibilidad y la atención prestada al consumo de energía gracias tanto a sensores como a medidores inteligentes en los niveles de máquina y de línea de producción. En consecuencia es posible y sencillo obtener datos de consumo de energía en tiempo real proveniente de los procesos de fabricación, pero además es posible analizarlos para incrementar su importancia en la toma de decisiones. Esta tesis pretende investigar cómo utilizar la adopción del Internet de las Cosas en el nivel de planta de producción, en procesos discretos, para incrementar la capacidad de uso de la información proveniente tanto de la energía como de la eficiencia energética. Para alcanzar este objetivo general, la investigación se ha dividido en cuatro sub-objetivos y la misma se ha desarrollado a lo largo de cuatro fases principales (en adelante estudios). El primer estudio de esta tesis, que se apoya sobre una revisión bibliográfica comprehensiva y sobre las aportaciones de expertos, define prácticas de gestión de la producción que son energéticamente eficientes y que se apoyan de un modo preeminente en la tecnología IoT. Este primer estudio también detalla los beneficios esperables al adoptar estas prácticas de gestión. Además, propugna un marco de referencia para permitir la integración de los datos que sobre el consumo energético se obtienen en el marco de las plataformas y sistemas de información de la compañía. Esto se lleva a cabo con el objetivo último de remarcar cómo estos datos pueden ser utilizados para apalancar decisiones en los niveles de procesos tanto tácticos como operativos. Segundo, considerando los precios de la energía como variables en el mercado intradiario y la disponibilidad de información detallada sobre el estado de las máquinas desde el punto de vista de consumo energético, el segundo estudio propone un modelo matemático para minimizar los costes del consumo de energía para la programación de asignaciones de una única máquina que deba atender a varios procesos de producción. Este modelo permite la toma de decisiones en el nivel de máquina para determinar los instantes de lanzamiento de cada trabajo de producción, los tiempos muertos, cuándo la máquina debe ser puesta en un estado de apagada, el momento adecuado para rearrancar, y para pararse, etc. Así, este modelo habilita al responsable de producción de implementar el esquema de producción menos costoso para cada turno de producción. En el tercer estudio esta investigación proporciona una metodología para ayudar a los responsables a implementar IoT en el nivel de los sistemas productivos. Se incluye un análisis del estado en que se encuentran los sistemas de gestión de energía y de producción en la factoría, así como también se proporcionan recomendaciones sobre procedimientos para implementar IoT para capturar y analizar los datos de consumo. Esta metodología ha sido validada en un estudio piloto, donde algunos indicadores clave de rendimiento (KPIs) han sido empleados para determinar la eficiencia energética. En el cuarto estudio el objetivo es introducir una vía para obtener visibilidad y relevancia a diferentes niveles de la energía consumida en los procesos de producción. El método propuesto permite que las factorías con procesos de producción discretos puedan determinar la energía consumida, el CO2 emitido o el coste de la energía consumida ya sea en cualquiera de los niveles: operación, producto o la orden de fabricación completa, siempre considerando las diferentes fuentes de energía y las fluctuaciones en los precios de la misma. Los resultados muestran que decisiones y prácticas de gestión para conseguir sistemas de producción energéticamente eficientes son posibles en virtud del Internet de las Cosas. También, con los resultados de esta tesis los responsables de la gestión energética en las compañías pueden plantearse una aproximación a la utilización del IoT desde un punto de vista de la obtención de beneficios, abordando aquellas prácticas de gestión energética que se encuentran más próximas al nivel de madurez de la factoría, a sus objetivos, al tipo de producción que desarrolla, etc. Así mismo esta tesis muestra que es posible obtener reducciones significativas de coste simplemente evitando los períodos de pico diario en el precio de la misma. Además la tesis permite identificar cómo el nivel de monitorización del consumo energético (es decir al nivel de máquina), el intervalo temporal, y el nivel del análisis de los datos son factores determinantes a la hora de localizar oportunidades para mejorar la eficiencia energética. Adicionalmente, la integración de datos de consumo energético en tiempo real con datos de producción (cuando existen altos niveles de estandarización en los procesos productivos y sus datos) es esencial para permitir que las factorías detallen la energía efectivamente consumida, su coste y CO2 emitido durante la producción de un producto o componente. Esto permite obtener una valiosa información a los gestores en el nivel decisor de la factoría así como a los consumidores y reguladores. ABSTRACT In today‘s manufacturing scenario, rising energy prices, increasing ecological awareness, and changing consumer behaviors are driving decision makers to prioritize green manufacturing. The Internet of Things (IoT) paradigm promises to increase the visibility and awareness of energy consumption, thanks to smart sensors and smart meters at the machine and production line level. Consequently, real-time energy consumption data from the manufacturing processes can be easily collected and then analyzed, to improve energy-aware decision-making. This thesis aims to investigate how to utilize the adoption of the Internet of Things at shop floor level to increase energy–awareness and the energy efficiency of discrete production processes. In order to achieve the main research goal, the research is divided into four sub-objectives, and is accomplished during four main phases (i.e., studies). In the first study, by relying on a comprehensive literature review and on experts‘ insights, the thesis defines energy-efficient production management practices that are enhanced and enabled by IoT technology. The first study also explains the benefits that can be obtained by adopting such management practices. Furthermore, it presents a framework to support the integration of gathered energy data into a company‘s information technology tools and platforms, which is done with the ultimate goal of highlighting how operational and tactical decision-making processes could leverage such data in order to improve energy efficiency. Considering the variable energy prices in one day, along with the availability of detailed machine status energy data, the second study proposes a mathematical model to minimize energy consumption costs for single machine production scheduling during production processes. This model works by making decisions at the machine level to determine the launch times for job processing, idle time, when the machine must be shut down, ―turning on‖ time, and ―turning off‖ time. This model enables the operations manager to implement the least expensive production schedule during a production shift. In the third study, the research provides a methodology to help managers implement the IoT at the production system level; it includes an analysis of current energy management and production systems at the factory, and recommends procedures for implementing the IoT to collect and analyze energy data. The methodology has been validated by a pilot study, where energy KPIs have been used to evaluate energy efficiency. In the fourth study, the goal is to introduce a way to achieve multi-level awareness of the energy consumed during production processes. The proposed method enables discrete factories to specify energy consumption, CO2 emissions, and the cost of the energy consumed at operation, production and order levels, while considering energy sources and fluctuations in energy prices. The results show that energy-efficient production management practices and decisions can be enhanced and enabled by the IoT. With the outcomes of the thesis, energy managers can approach the IoT adoption in a benefit-driven way, by addressing energy management practices that are close to the maturity level of the factory, target, production type, etc. The thesis also shows that significant reductions in energy costs can be achieved by avoiding high-energy price periods in a day. Furthermore, the thesis determines the level of monitoring energy consumption (i.e., machine level), the interval time, and the level of energy data analysis, which are all important factors involved in finding opportunities to improve energy efficiency. Eventually, integrating real-time energy data with production data (when there are high levels of production process standardization data) is essential to enable factories to specify the amount and cost of energy consumed, as well as the CO2 emitted while producing a product, providing valuable information to decision makers at the factory level as well as to consumers and regulators.

On-line microwave-based preconcentration device for inductively coupled plasma atomic emission spectrometry: Application to the elemental analysis of spirit samples

A microwave-based thermal nebulizer (MWTN) has been employed for the first time as on-line preconcentration device in inductively coupled plasma atomic emission spectrometry (ICP-AES). By the appropriate selection of the experimental conditions, the MWTN could be either operated as a conventional thermal nebulizer or as on-line analyte preconcentration and nebulization device. Thus, when operating at microwave power values above 100 W and highly concentrated alcohol solutions, the amount of energy per solvent mass liquid unit (EMR) is high enough to completely evaporate the solvent inside the system and, as a consequence, the analyte is deposited (and then preconcentrated) on the inner walls of the MWTN capillary. When reducing the EMR to the appropriate value (e.g., by reducing the microwave power at a constant sample uptake rate) the retained analyte is swept along by the liquid-gas stream and an analyte-enriched aerosol is generated and next introduced into the plasma cell. Emission signals obtained with the MWTN operating in preconcentration-nebulization mode improved when increasing preconcentration time and sample uptake rate as well as when decreasing the nozzle inner diameter. When running with pure ethanol solution at its optimum experimental conditions, the MWTN in preconcentration-nebulization mode afforded limits of detection up to one order of magnitude lowers than those obtained operating the MWTN exclusively as a nebulizer. To validate the method, the multi-element analysis (i.e. Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Pb and Zn) of different commercial spirit samples in ICP-AES has been performed. Analyte recoveries for all the elements studied ranged between 93% and 107% and the dynamic linear range covered up to 4 orders of magnitude (i.e. from 0.1 to 1000 μg L−1). In these analysis, both MWTN operating modes afforded similar results. Nevertheless, the preconcentration-nebulization mode permits to determine a higher number of analytes due to its higher detection capabilities.

Sedimentology, organic geochemistry, and stable isotopes of core PS2138-1

We studied variations in terrigenous (TOM) and marine organic matter (MOM) input in a sediment core on the northern Barents Sea margin over the last 30 ka. Using a multiproxy approach, we reconstructed processes controlling organic carbon deposition and investigated their paleoceanographic significance in the North Atlantic-Arctic Gateways. Variations in paleo-surface-water productivity are not documented in amount and composition of organic carbon. The highest level of MOM was deposited during 25-23 ka as a result of scavenging on fine-grained, reworked, and TOM-rich material released by the retreating Svalbard/Barents Sea ice sheet during the late Weichselian. A second peak of MOM is preserved because of sorptive protection by detrital and terrigenous organic matter, higher surface-water productivity due to permanent intrusion of Atlantic water, and high suspension load release by melting sea ice during 15.9-11.2 ka.

Power, privilege and HIV prevalence: examination of sexual HIV-risk factors in MSM and transgender women who engage in transactional sex

Thesis (Master's)--University of Washington, 2016-06

Food and nutrient consumption patterns in third trimester Thai-Muslim pregnant women in rural Southern Thailand

The aims of this study were to determine food and nutrient intakes and the socio-economic factors influencing food and nutrient intakes of rural Thai-Muslim women in the third trimester of pregnancy. The study was conducted in Pattani province, Thailand, where 166 women were interviewed between 32 and 40 weeks gestation. A questionnaire. including a Food Frequency Questionnaire was used. Data on food items were compiled into the five basic Thai food groups, and food intakes were computed into macro and micro-nutrients. Mean weight intake of each of the five groups was below the recommended level for pregnant Thai women. Mean intake of niacin, vitamin A (RE) and vitamin C were above the recommended Thai level. Thiamin, calcium. phosphorus and iron intakes were lower than 50% of recommended levels. Intakes of the five food groups were not associated with socio-economic status, although total non-haem iron intake was associated with level of education. Under-consumption of food and nutrients among pregnant women in the study area was due to poor education. poverty and food availability. Integrated strategies should be considered to promote increased intakes to meet nutrient recommendations.

Socio-economic inequalities in women's fruit and vegetable intakes: a multilevel study of individual, social and environmental mediators

Objective: This study employed a multilevel design to test the contribution of individual, social and environmental factors to mediating socio-economic status (SES) inequalities in fruit and vegetable consumption among women. Design: A cross-sectional survey was linked with objective environmental data. Setting: A community sample involving 45 neighbourhoods. Subjects: In total, 1347 women from 45 neighbourhoods provided survey data on their SES (highest education level), nutrition knowledge, health considerations related to food purchasing, and social support for healthy eating. These data were linked with objective environmental data on the density of supermarkets and fruit and vegetable outlets in local neighbourhoods. Results: Multilevel modelling showed that individual and social factors partly mediated, but did not completely explain, SES variations in fruit and vegetable consumption. Store density did not mediate the relationship of SES with fruit or vegetable consumption. Conclusions: Nutrition promotion interventions should focus on enhancing nutrition knowledge and health considerations underlying food purchasing in order to promote healthy eating, particularly among those who are socio-economically disadvantaged. Further investigation is required to identify additional potential mediators of SES-diet relationships, particularly at the environmental level. © The Authors 2006.

Out in psychology:lesbian, gay, bisexual, trans and queer perspectives

There has been a recent explosion of interest in Lesbian, Gay, Bisexual and Trans Perspective Psychology amongst students and academics, and this interest is predicted to continue to rise. Recent media debates on subjects such as same–sex marriage have fuelled interest in LGBTQ perspectives. This edited collection showcases the latest thinking in LGBTQ psychology. The book has 21 chapters covering subjects such as same sex parenting, outing, young LGBTQ people, sport, learning disabilities, lesbian and gay identities etc. The book has an international focus, with contributors from UK, US, Canada, Australia and New Zealand List of Contributors. Foreword by Jerry J. Bigner. 1. Introducing Out in Psychology (Victoria Clarke and Elizabeth Peel). 2. From lesbian and gay psychology to LGBTQ psychologies: A journey into the unknown (Victoria Clarke and Elizabeth Peel) 3. What comes after discourse analysis for LGBTQ psychology(Peter Hegarty). 4. Recognising race in LGBTQ psychology: Power, privilege and complicity (Damien W. Riggs). 5. Personality, individual differences and LGB psychology (Gareth Hagger Johnson). 6. Heteronormativity and the exclusion of bisexuality in psychology (Meg Barker). 7. A minority within a minority: Experiences of gay men with intellectual disabilities.(Christopher Bennett and Adrian Coyle). 8. Closet talk: The contemporary relevance of the closet in lesbian and gay interaction (Victoria Land and Celia Kitzinger) 9. Romance, rights, recognition, responsibilities and radicalism: Same-sex couples’ accounts of civil partnership and marriage (Victoria Clarke, Carole Burgoyne and Maree Burns). 10. The experience of social power in the lives of trans people (Clair Clifford and Jim Orford). 11. What do they look like and are they among us? Bisexuality, (dis.closure and (Maria Gurevich, Jo Bower, Cynthia M. Mathieson and Bramilee Dhayanandhan). 12. Heterosexism at work: Diversity training, discrimination law and the limits of liberal individualism (Rosie Harding and Elizabeth Peel). 13. Out on the ball fields: Lesbians in sport (Vikki Krane and Kerrie J. Kauer). 14. Homophobia, rights and community: Contemporary issues in the lives of LGB people in the UK (Sonja J. Ellis). 15. Striving for holistic success: How lesbians come out on top (Faith Rostad and Bonita C. Long). 16. On Passing: The Interactional Organization of Appearance Attributions in the Psychiatric Assessment of Transsexual Patients (Susan A. Speer and Richard Green). 17. Alcohol and gay men: Consumption, promotion and policy responses (Jeffrey Adams, Timothy McCreanor and Virginia Braun). 18. Towards a clinical-psychological approach to address the hetero sexual concerns of intersexed women (Lih-Mei Liao). 19. Educational psychology practice with LGB youth in schools: Individual and institutional interventions (Jeremy J. Monsen and Sydney Bailey). 20. Que(e)rying the meaning of lesbian health: Individual(izing and community discourses (Sara MacBride-Stewart). 21. Transsexualism: Diagnostic dilemmas, transgender politics and the future of transgender care (Katherine Johnson). Index.

Creative self-efficacy and individual creativity in teams:cross-level interactions with team informational resources

We propose a cross-level perspective on the relation between creative self-efficacy and individual creativity in which team informational resources, comprising both shared “knowledge of who knows what” (KWKW) and functional background diversity, benefit the creativity of individuals more with higher creative self-efficacy. To test our hypotheses, we conducted a multi-level study with 176 employees working in 34 research and development teams of a multinational company in 4 countries. In support of our hypotheses, the link between creative self-efficacy and individual creativity was more positive with greater shared KWKW, and this interactive effect was pronounced for teams of high rather than low functional background diversity. We discuss implications for the study of creative self-efficacy in team contexts. (PsycINFO Database Record (c) 2012 APA, all rights reserved).