Tricomas foliares em tomateiro com teores contrastantes do aleloquímico 2-tridecanona

Duas espécies de tomateiro, Lycopersicon esculentum Mill. (Linhagem TOM 556- padrão com baixo teor da metil cetona 2-tridecanona (2-TD) e Lycopersicon hirsutum Dunal var. glabratum Mill. (Linhagem PI 134417- padrão com elevado teor de 2-TD), foram analisadas em conjunto para identificação e quantificação de tricomas foliares. A parte experimental constou da identificação dos tricomas, baseado na presença ou ausência da cabeça secretora na extremidade apical dos tricomas, arranjo e número de células da cabeça, comprimento dos tricomas, e da quantificação do número de tricomas glandulares e não glandulares nos folíolos. O delineamento utilizado para o número de tricomas foi inteiramente casualizado e as médias comparadas pelo teste de Tukey, a 5%. A identificação e quantificação para as espécies foram: a) TOM 556: Tricomas não glandulares do tipo II + III + V (2590 cm-2 de área foliolar); glandular do tipo VI (16 cm-2); glandular do tipo VII (138 cm-2); b) PI 134417: não glandulares do tipo II + III + V (140 cm-2 de área foliolar); glandular do tipo I + IV (843 cm-2); glandular do tipo VI (83 cm-2); glandular do tipo VII (11 cm-2). As maiores concentrações da 2-TD nos folíolos, estão associadas às maiores densidades de tricomas glandulares presentes em ambas espécies.

Influência da palha e da simulação de chuva sobre a eficácia da mistura formulada clomazone + hexazinone no controle de plantas daninhas em área de cana-crua

O experimento teve o objetivo de avaliar os efeitos da cobertura de palha e da simulação de chuva sobre a eficácia da mistura formulada clomazone + hexazinone no controle de plantas daninhas em área de cana-crua. Foi avaliado o controle de Brachiaria decumbens, Ipomoea grandifolia, Ipomoea hederifolia e Euphorbia heterophylla. A dose do herbicida utilizada foi de 2,2 kg ha-1 de produto comercial, correspondendo a 880 e 220 g ha-1 dos ingredientes ativos clomazone e hexazinone, respectivamente. Os tratamentos utilizados foram: T1) semeadura + palha 5 t ha-1 + aplicação + chuva de 30 mm (1DAA); T2) semeadura + chuva de 30 mm + palha 5 t ha-1 + aplicação; T3) semeadura + aplicação + palha 5 t ha-1 ; T4) semeadura + palha 5 t ha-1 + chuva de 30 mm + aplicação (12h após); T5) semeadura + palha 5 t ha-1 + aplicação + chuva de 2,5 mm (logo após); T6) semeadura + aplicação + chuva de 30 mm; T7) testemunha sem palha; e T8) testemunha com 5 t ha-1 de palha, totalizando oito tratamentos com quatro repetições, dispostos no delineamento experimental de blocos casualizados. Foram feitas avaliações visuais de controle aos 6, 13, 21, 27 e 35 dias após a aplicação (DAA). Para controle de B. decumbens, os melhores tratamentos foram aqueles nos quais o herbicida foi aplicado diretamente no solo, recebendo ou não uma camada de palha sobre o solo após a aplicação do herbicida, e quando foi aplicado sobre a camada de palha, recebendo uma chuva após a aplicação. Para a espécie E. heterophylla, os resultados foram bastante satisfatórios, proporcionando médias acima de 98% de controle, quando ocorreram precipitações posteriores à aplicação do herbicida. de modo geral, os tratamentos com a aplicação do herbicida, na ausência ou presença de palha, e posterior chuva apresentaram controle total da espécie I. hederifolia aos 35 DAA. Todos os tratamentos mostraram excelente controle para a espécie I. grandifolia.

Projeto, construção e análise de desempenho de um forno solar alternativo tipo caixa a baixo custo

An alternative box-type solar oven constructed from the scrap iron of a gas conventional cook is presented, which functions principles are the effect greenhouse and the concentration. The oven of the conventional cook is the baking enclosure where the absorber (pot) of the solar oven is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven for the concentration of the radiation and a reflecting parabola was introduced in the baking enclosure for the exploitation of the incident reflected radiation in the interior of the oven. The oven is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove in study will be demonstrate The average internal temperature of the absorber was around 150°C and the internal temperature around 120°C. Will demonstrate that its low cost and good thermal performance represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

MYCELIAL DEVELOPMENT of Lentinula edodes IN CULTURE MEDIA WITH DIFFERENT ORGANIC SUBSTRATES

The radial mycelial growth of Lentinula edodes (Berk) Pegler, strain LE-96/13, was studied in culture media prepared with organic residues extract, by using substrates prepared with pineapple (Ananas comosus (L.) Merril) crown, Astrocaryum aculeatum Meyer peel, Theobroma grandiflorum Schum shell, Musa sp. (genomic group AAB, subgroup Pacovan) peel, and Musa sp. (genomic group AAB, subgroup Praia) peel, with three supplementation levels with wheat bran (0, 10 and 20%), and incubated at 25 degrees C. The experimental design was totally randomized, in a 5x3 factorial scheme, adding up 15 treatments with 4 repetitions, and each repetition corresponding to a Petri dish. The diameter of the colony was evaluated daily during nine days of incubation. After that period, it was verified that the highest mycelial growth averages of strain LE-96/13 of L. edodes were found in culture media prepared with T. grandiflorum Schum shell (whose supplementation with wheat bran was favorable for Mushroom development) and A. aculeatum Meyer peel (whose supplementation did not favor the mycelial growth of L. edodes in relation to the medium not supplemented).

Construção e análise de desempenho de um forno/fogão solar tipo caixa construído a partir de uma sucata de pneu

An alternative box-type solar cooker built starting from the scrap of a tire and a scrap of old office chair is presented, which principles functions are the effect greenhouse and the concentration. The tire served as structure for making of is the baking enclosure where the absorber (roasting pan 20x30cm) of the solar is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven/cook for the concentration of the radiation and a reflecting parable was introduced in the baking enclosure for the exploitation of the incident reflected radiation inside of the oven/cook. The oven/cook is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove/cook in study will be demonstrate. The average internal temperature of the absorber was around 152,3°C and the internal temperature around 110°C. Will demonstrate that toits low cost and good thermal performance, represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Avaliação da esporulação de Bionectria ochroleuca em diferentes meios de culturas

The biological control of the plants diseases, caused by fungi, is carried out using others organisms (predator, parasite or pathogen). Among the possible agents of biocontrol, a fungus has been highlighting as promising and it is known as Clonostachys rosea, asexual form of Bionectria ochroleuca. For that, it is necessary the in vitro production of spores of this fungus. In this study were tested several culture media to select those with better conidia production. The study was conducted at Plant Protection Division, in the Plant Production Department, FCA - UNESP, Botucatu campus, São Paulo state, Brazil. We used the isolated CCR64 (Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)-CNPMA). The means of crops were: BDA; Oats-Agar; Mazeina-Agar; Rice-Agar; V8-5%; V8-10%; V8-20%; TJ-5 %; TJ-10, TJ-20%. The sporulation of the fungus in different culture media was estimated at 8 days after of the incubation. The data were analyzed using method of comparing averages, using the Tukey test, at 5% probability, and the data processed, using (X + 1) 0.5 transformation. All culture media tested were able to produce conidia. It was found that the best culture media for production of conidia of Bionectria ochroleuca is the TJ-5%, followed by TJ-20%, with an sporulation average of 3,5 x 106 conidia / ml.

Applicability of the use of waste from different banana cultivars for the cultivation of the oyster mushroom

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crescimento micelial in vitro de cinco linhagens de Agaricus bisporus submetidas a diferentes condições de temperatura

Avaliou-se o crescimento micelial in vitro das linhagens ABI-05/03, ABI-06/04, ABI-04/02, ABI-06/05 e ABI-01/01 de Agaricus bisporus em meios de cultura sólidos à base de composto. As avaliações foram realizadas por meio de medições de quatro diâmetros das colônias, a cada 48h, durante 12 dias de incubação, no escuro, a 20 e 25ºC. O delineamento experimental foi o de blocos casualizados, com uso do teste de Tukey para a comparação das médias. Co m base nos resultados obtidos, verificou-se que: o crescimento micelial de A. bisporus é influenciado pela temperatura de incubação; a temperatura de 25ºC foi mais favorável para o crescimento micelial de todas as linhagens de A. bisporus; na temperatura de 20ºC, o melhor crescimento foi obtido com as linhagens ABI-06/05 e ABI-01/01; na temperatura de 25ºC, a linhagem ABI-01/01 apresentou crescimento significativamente maior que todas as demais.

Comparação da precisão dos resultados do teste de tetrazolio usando a metodologia alternativa e a tradicional em sementes de soja

The use of tetrazolium testing is recognized in the soybean seed quality control due to the large amount of data which it provides. Although it is considered a quick test, in 1998 an alternative methodology was proposed for the seed preconditioning, which allows 10 hours of time saving in seeds preparation. The objective of this research is to compare the accuracy of the new and the traditional tetrazolium testing. Three soybean seed genotypes were used, Conquista, Garantia and M-soy 8400, all 2000/2001 crop. The seeds were evaluated in relation to germination, evaluated with the traditional (TZt) and the alternative (Tza) tetrazolium test as well as with the accelerated aging performed in two different conditions (45 degrees C 24h(-1) and 45 degrees C 72h(-1)). After aging, the seeds too were submitted to TZt and Tza testing. The experimental design was a randomized blocks, with four replicates the 50 seeds per genotype in every evaluation, with exception only for tetrazolium test, with two replicates. The averages were compared in the Tukey test level of 5% probability. The comparison between the two methodologies in relation to level of vigor (class 1 to 3) and germination potential (class 1 to 5) indicated no statistical discrepancies, for aged non-aged seeds. This, the use of the alternative tetrazolium test is recommend in case a reduced seed preparation time is needed.

Dinâmica de Sedimentação de Lodo em Lagoas de Estabilização

Stabilization ponds are an effective sewage treatment alternative for the climatic conditions prevailing in Brazil. In the present work, a primary facultative pond was studied, in the city of Natal, Rio Grande do Norte, Northeast Brazil. The aim of this study was to evaluate the sedimentation dynamics in the facultative pond. The pond was divided in three section or zones along its length starting from the inlet end namely A1, A2 and A3. The research was accomplished in three phases. In the first the mapping of the sludge layer was done, sludge core samples were also collected for analysis for total, fixed and volatile solids and the depth of the sludge layer was determined using a portable echo sounder. In the second solids sedimentation rates were measured using traps placed in the inlet and outlet zones and in the third phase resuspension sludge was evaluate using a tracer. The amount accumulated sludge since the start operation was 13.583 m3. The sedimentation constant averages changed between 0.93 to 2.94 and 3.90 to 5.80 for the depths of 0.5 and 1.0 m respectively. The relationship between volatile and fixed solids (SV/SF) increased along the pond. The removal efficiencies were 52.12%, 36.09%, and 37.50% for BOD, COD and SS, respectively. The sludge accumulation model proposed had a good adjustment with 0.17 m3/hab.year rate. The results presented here demonstrated that the wind had a direct influence on the sedimentation of solids in this pond affecting the efficiency and sludge accumulation

Desenvolvimento de mudas de Tabeluia chrysotricha em função de substratos e de soluções de fertirrigação

The work aimed to study the development of Tabebuia chrysotricha Standl. seedlings injunction of different substrate and different fertilization solutions. To compose the substrate it was used fibrous and granulated coconut fiber obtaining the following treatments: S1- 100% fibrous, S2- 60% fibrous and 40% granulated, S3- 40% fibrous and 60% granulated and S4- 100% granulated. The basis fertilization was the same for all treatments and the solutions of fertilization varied in order to obtain solutions with the following electric conductivities: EC1- 1.06 dS m(-1), EC2- 2.12 dS m(-1), EC3- 3.2 dS m(-1) and EC4- 4.25 dS m(-1). The propagative material was sowed directly in plastic containers (120mL) with the respective substrates. The fertilization was received through sub irrigation once a week, until the seedlings reached 20cm of height approximately. The chemical analyses of the substrate (EC and pH), through aqueous extraction method 1:1.5 (1 substrate: 1.5 deionized water), the analyses of aerial part height, stein diameter and pairs true leaves number, as well as the weight of total dry, matter, were accomplished each 15 days. In almost every analysis, the substrate with granulated coconut fiber, as well as the smallest EC (1.06 e 2.12 dS m(-1)) of fertilization solutions,formed seedlings with higher averages, indicating faster growth. In the conditions of this experiment, the production of T. chrysotricha seedlings was better in granulated coconut fiber substrate and fertilizer solutions with EC of 1.06 dS m(-1), appreciating the estimated characteristics.

A gestão da qualidade nos cursos de graduação a distância da UFRN/SEDIS : a percepção dos discentes

The management of water resources in the river basin level, as it defines the Law nº 9433/97, requires the effective knowledge of the processes of hydrological basin, resulting from studies based on consistent series of hydrological data that reflect the characteristics of the basin. In this context, the objective of this work was to develop the modeling of catchment basin of the river Jundiaí - RN and carry out the study of attenuation of a flood of the dam Tabatinga, by means of a monitoring project of hydrological data and climatology of the basin, with a view to promoting the development of research activities by applying methodologies unified and appropriate for the assessment of hydrological studies in the transition region of the semiarid and the forest zone on the coast of Rio Grande do Norte. For the study of the hydrological characteristics of the basin was conducted the automatic design of the basin of the river Jundiaí, with the aid of programs of geoprocessing, was adopted a hydrological model daily, the NRCS, which is a model determined and concentrated. For the use of this model was necessary to determine some parameters that are used in this model, as the Curve Number. Having in mind that this is the first study that is being conducted in the basin with the employment of this model, it was made sensitivity analysis of the results of this model from the adoption of different values of CN, situated within a range appropriate to the conditions of use, occupation and the nature of the soil of this basin. As the objective of this study was also developing a simulation model of the operation of the Tabatinga dam and with this flood control caused in the city of Macaíba, it was developed a mathematical model of fluid balance, developed to be used in Microsoft Excel. The simulation was conducted in two phases: the first step was promoted the water balance daily that allowed the analysis of the sensitivity of the model in relation to the volume of waiting, as well as the determination of the period of greatest discharges daily averages. From this point, it was assumed for the second stage, which was in the determination of the hydrograph of discharges effluent slots, that was determined by means of the fluid balance time, on the basis of the discharges effluents generated by a mathematical equation whose parameters were adjusted according to the hydrograph daily. Through the analyzes it was realized that the dam Tabatinga only has how to carry out the attenuation of floods through the regularization of the volume of waiting, with this there is a loss of approximately 56.5% on storage capacity of this dam, because for causing the attenuation effect of filled the shell of this dam has to remain more than 5m below the level of the sill, representing at least 50.582.927m3. The results obtained with the modeling represents a first step in the direction of improving the level of hydrological information about the behavior of the basins of the semiarid. In order to monitor quantitatively the hydrographic basin of the river Jundiaí will be necessary to install a rain gauge register, next to the Tabatinga dam and a pressure transducer, for regular measurements of flow in the reservoir of the dam. The climatological data will be collected in full automatic weather station installed in Agricultural School Jundiaí

Caracterização e avaliação do macro sistema urbano de distribuição de água de Natal RN

The aim of this study is to characterize and evaluate the Macro System of Regional Water Distribution Natal North (RNN) and Southern Regional Natal (RNS), covering 35% and 65% respectively of the Natal-RN City. The terms of the quality and quantity of water (surface and groundwater) were also evaluated in order to adjust the parameters that contribute to proper distribution and control in water reserves. The methodology of the work took place from collecting volumetric data of production capacity and distribution of the two treatment plants for Regional as well as the flow rates of wells. Yet the quantitative capacity of reservation, distribution and consumption of the main reservoirs, population numbers and consumption of members neighborhoods were collected. Data were tabulated and used in computational simulator EPANET to diagnose possible through the water balance, the offers and demands on the water supply system in the neighborhoods of the capital, linking them to specific distribution points. We also evaluated the wells in the levels of nitrate in water consumed. As a result it was found that some neighborhoods in the South Regional Natal, was ranked as critical supply situation: City of Hope, Lagoa Nova and Nova Descoberta, where demand exceeds supply. While in most Northern Regional Natal present deficiency in the supply system as: Lagoa Azul, the Parque dos Coqueiros, igapó, Amarante and Salinas. The rates of nitrate in the city were significant, but manageable with corrective and preventive measures. The averages were 12 mg /l-N in Candelária, 10 mg/l-N in Lagoa Nova, 9 mg/l-N in Satelite, 20 mg/l-N in Gramore and 15 mg/l-N in N. Sra. Apresentação. Therefore proper distribution of water abstracted and implementation of quality control ensures the supply required by the system, associated with preservation of Water Resources of the Metropolitan Region of Natal

Zinco plasmático e estado nutricional em idosos

OBJETIVO: Neste estudo foi avaliado o zinco plasmático associado ao estado nutricional de 80 indivíduos idosos saudáveis, atendidos no Centro de Reabilitação da Prefeitura Municipal de Araraquara, SP, entre 1998 e 1999. MÉTODOS: Os participantes foram entrevistados para obtenção dos dados de ingestão de alimentos e, a partir desses dados, foram estimados o consumo de macronutrientes e de zinco dietético. A concentração do zinco plasmático foi dosada por Espectroscopia de Emissão Atômica com Plasma de Argônio Induzido. Para a avaliação nutricional foram tomadas as medidas do peso corporal, altura, circunferência do braço e prega cutânea triciptal. RESULTADOS: A alimentação das mulheres foi adequada em proteínas e lipídios, mas insuficiente em carboidratos e energia. Os homens apresentaram ingestão suficiente de energia, mas com excesso de lípides associado à insuficiência de carboidratos. A ingestão média de zinco, pelas mulheres (10,8±4,1mg/d) e pelos homens (19,7±7,2mg/d), estava de acordo com a recomendação. As concentrações plasmáticas de zinco nas mulheres (7,2±3,5µmol/L) e nos homens (6,5±3,8µmol/L) estavam abaixo das referências para a idade, e não foram correlacionadas com o zinco alimentar. Foi detectada correlação significante e positiva entre o zinco plasmático e a ingestão de proteína; entretanto, essa correlação se apresentou negativa com a idade. CONCLUSÕES: A redução da biodisponibilidade do zinco dietético pode ter sido devida ao consumo elevado de leguminosas e ao consumo reduzido de carnes que, associados à ingestão energética insuficiente das mulheres, tiveram repercussões nas concentrações plasmáticas daquele nutriente. É necessária a atenção nutricional voltada aos idosos, visando melhorar a biodisponibilidade do zinco alimentar, e para prevenir ou corrigir sua deficiência por meio de suplementação.

Equações preditivas para as pressões respiratórias máximas de crianças brasileiras

I ntroduction: The assessment of respiratory muscle strength is important in the diagnosis and monitoring of the respiratory muscles weakness of respiratory and neuromuscular diseases. However, there are still no studies that provide predictive equations and reference values for maximal respiratory pressures for children in our population. Aim: The purpose of this study was to propose predictive equations for maximal respiratory pressures in healthy school children. Method: This is an observational cross-sectional study. 144 healthy children were assessed. They were students from public and private schools in the city of Natal /RN (63 boys and 81 girls), subdivided in age groups of 7-8 and 9-11 years. The students presented the BMI, for age and sex, between 5 and 85 percentile. Maximal respiratory pressures were measured with the digital manometer MVD300 (Globalmed ®). The maximal inspiratory pressure (MIP) and maximal expiratory pressures (MEP) were measured from residual volume and total lung capacity, respectively. The data were analyzed using the SPSS Statistics 15.0 software (Statistical Package for Social Science) by assigning the significance level of 5%. Descriptive analysis was expressed as mean and standard deviation. T'Student test was used for unpaired comparison of averages of the variables. The comparison of measurements obtained with the predicted values in previous studies was performed using the paired t'Student test. The Pearson correlation test was used to verify the correlation of MRP's with the independent variables (age, sex, weight and height). For the equations analysis the stepwise linear regression was used. Results: By analyzing the data, we observed that in the age range studied MIP was significantly higher in boys. The MEP did not differ between boys and girls aged 7 to 8 years, the reverse occurred in the age between 9 and 11 years. The boys had a significant increase in respiratory muscle strength with advancing age. Regardless sex and age, MEP was always higher than the MIP. The reference values found in this study are similar to a sample of Spanish and Canadian children. The two models proposed in previous studies with children from other countries were not able to consistently predict the values observed in this studied population. The variables sex, age and weight correlated with MIP, whereas the MEP was also correlated with height. However, in the regression models proposed in this study, only gender and age were kept exerting influence on the variability of maximal inspiratory and expiratory pressures. Conclusion: This study provides reference values, lower limits of normality and proposes two models that allow predicting, through the independent variables, sex and age, the value of maximal static respiratory pressures in healthy children aged between 7 and 11 years old