Millora aerodinàmica de la nova carrosseria del vehicle l'Àliga. Estudis dels efectes de la rugositat i l'inserció d'apèndixs aerodinàmics

L' objectiu d' aquest estudi és intentar millorar l' aerodinàmica de la nova carrosseria del vehicle de baix consum de la UdG,l' Àliga, a través de programes informàtics de CFD. Des de fa uns anys l' Escola Politècnica Superior de la Universitat de Girona participa a l' Eco Shell Marathon, mirant d' assolir els millors resultats possibles.El nom del vehicle utilitzat per aquesta carrera és l' Àliga. Aquest projecte parteix dels resultats obtinguts al Projece fi de carrera d' en Daniel Vilavedra Vilà (2006):"Redisseny aerodinàmic de la carrosseria del vehicle de baix consum Àliga"

Anàlisi estructural de voltes ceràmiques i patologies de l’ església de Sant Narcís

Aquest treball analitza dues tipologies de voltes (la volta de quatre punts i la volta de maó de pla o cúpula seimiesfèrica) , situades a l’església de Sant Narcís a Girona, amb la finalitat d’establir un model de mesura i estudi aproximat de la seva capacitat portant. L’abast del projecte es pot dividir en tres grans blocs: el primer, desenvolupa l’origen tècnic i històric de les voltes i del barri de Sant Narcís; el segon, tracta de la composició de materials i elements, duent a terme una anàlisi constructiva i patològica que defineix les característiques, ordre i deficiències de diferents elements i materials que formen part de l’edifici; i el tercer bloc tracta del càlcul estructural, on es realitzen diferents modelitzacions d’una de les voltes de quatre punts i de la volta semiesfèrica de l’església de Sant Narcís, amb la fi de verificar i trobar el model més apropiat per dur a terme una anàlisi, mitjançant el programa de càlcul ANSYS

Estudi hidrodinàmic per elements finits de diferents pales simètriques per a la impulsió a rem en banc fix

Actualment l’esport del rem només s’entén com a activitat de lleure o esport de competició. Dins del rem, hi ha una gran varietat de disciplines esportives; totes coincideixen en l’impuls d’una embarcació mitjançant un sistema de palanques simple. Es diferencien en dos grans grups: el banc mòbil i el banc fix. El banc mòbil disposa d’un seient sobre rodes que permet aprofitar la força de les cames per la impulsió, en canvi, en el banc fix, no hi ha desplaçament del seient, el que implica el treball del tors i braços. Un dels punts que tenen en comú tot el banc fix, és el disseny del seu rem; a diferència del banc mòbil on la pala pot tenir el disseny que es vulgui. En banc fix la pala del rem ha de ser simètrica i alineada amb la canya del rem. L’objectiu d’aquest projecte és l’anàlisi hidrodinàmic de diferents models de pales simètriques per tal de determinar el model més eficient, des del punt de vista hidrodinàmic, per a la impulsió de l’embarcació de banc fix. Així, es simularan virtualment diferents models de pales simètriques disponibles en el mercat com models prototipus amb un programa de dinàmica de fluids computacional. L’anàlisi dels resultats determinarà el model més eficient. En la realització del projecte, l’estudi hidrodinàmic es realitzarà de manera virtual a partir de la utilització de programes comercials de dinàmica de fluids. Així com també programes de disseny 3D i programes de mallat que siguin compatibles amb el programa de simulació a utilitzar. En el disseny s’utilitzaran programes com Autocad i Rhinoceros, després, en funció del disseny, utilitzarem un programa d’elements finits anomenat ICEM ANSYS que mallarà la geometria emprada. Finalment, la simulació s’efectuarà amb el programa ANSYS CFX. L’estudi no preveu el càlcul de resistència mecànica dels models ni la seva construcció

Modelització numèrica d’un sistema de descàrrega d’una columna de la catedral d Girona mitjançant el mètode dels elements finits (anàlisi no lineal)

Aquest projecte consisteix en aplicar el càlcul no lineal en la modelització volumètrica numèrica de l’estructura del sistema de descàrrega d’una columna del claustre de la catedral de Girona mitjançant el mètode dels elements finits. A la Universitat de Girona s’ha fet diferents estudis del claustre de la catedral de Girona però sempre simulant un comportament lineal de les característiques dels materials. El programa utilitzat és la versió docent del programa ANSYS disponible al Dept. d’EMCI i l’element emprat ha sigut el SOLID65. Aquest element permet introduir característiques de no linealitat en els models i és adequat per a anàlisi no lineal d’elements com la pedra de Girona

Theoretical and experimental investigation of wall confluent jets ventilation and comparison with wall displacement ventilation

This paper reports CFD and experimental results of the characteristics of wall confluent jets in a room. The results presented show the behaviour of wall confluent jets in the form of velocity profiles, the spreading rate of jets on the surface, jets decay, etc. The empirical equations derived are compared with other types of air jets. In addition, the flow in wall confluent jets is compared with the flow in displacement ventilation supply, with regards to the vertical and horizontal spreading on the floor. It is concluded that the jet momentum of wall confluent jets can be more conserved than other jets. Thus, wall confluent jets have a greater spread over the floor than displacement flow.

Dynamic modelling of a wind catcher/tower turret for natural ventilation

This paper discusses experimental and theoretical investigations and Computational Fluid Dynamics (CFD) modelling considerations to evaluate the performance of a square section wind catcher system connected to the top of a test room for the purpose of natural ventilation. The magnitude and distribution of pressure coefficients (C-p) around a wind catcher and the air flow into the test room were analysed. The modelling results indicated that air was supplied into the test room through the wind catcher's quadrants with positive external pressure coefficients and extracted out of the test room through quadrants with negative pressure coefficients. The air flow achieved through the wind catcher depends on the speed and direction of the wind. The results obtained using the explicit and AIDA implicit calculation procedures and CFX code correlate relatively well with the experimental results at lower wind speeds and with wind incidents at an angle of 0 degrees. Variation in the C-p and air flow results were observed particularly with a wind direction of 45 degrees. The explicit and implicit calculation procedures were found to be quick and easy to use in obtaining results whereas the wind tunnel tests were more expensive in terms of effort, cost and time. CFD codes are developing rapidly and are widely available especially with the decreasing prices of computer hardware. However, results obtained using CFD codes must be considered with care, particularly in the absence of empirical data.

Effect of damper and heat source on wind catcher natural ventilation performance

Experimental wind tunnel and smoke visualisation testing and CFD modelling were conducted to investigate the effect of air flow control mechanism and heat source inside rooms on wind catchers/towers performance. For this purpose, a full-scale wind catcher was connected to a test room and positioned centrally in an open boundary wind tunnel. Pressure coefficients (C-p's) around the wind catcher and air flow into the test room were established. The performance of the wind catcher depends greatly on the wind speed and direction. The incorporation of dampers and egg crate grille at ceiling level reduces and regulates the air flow rate with an average pressure loss coefficient of 0.01. The operation of the wind catcher in the presence of heat sources will potentially lower the internal temperatures in line with the external temperatures.

Utility of wind catchers for nocturnal ventilation

Wind catcher systems have been employed in buildings in the Middle East for many centuries and they are known by different names in different parts of the region. Recently there has been an increase in the application of this approach for natural ventilation and passive cooling in the UK and other countries. This paper presents the results of experimental wind tunnel and smoke visualisation testing, combined with CFD modelling, to investigate the performance of the wind catcher. For this purpose, a full-scale commercial system was connected to a test room and positioned centrally in an open boundary wind tunnel. Because much ventilation design involves the use of computational fluid dynamics, the measured performance of the system was also compared against the results of CFD analysis. Configurations included both a heated and unheated space to determine the impact of internal heat sources on airflow rate. Good comparisons between measurement and CFD analysis were obtained. Measurements showed that sufficient air change could be achieved to meet both air quality needs and passive cooling.

Performance evaluation of wall mounted convector for pre-heating naturally ventilated spaces

This paper presents the results of performance monitoring under real winter weather conditions, controlled laboratory testing and computational fluid dynamics (CFD) analysis of a wall mounted ventilation air inlet heat convector. For real winter weather monitoring, the wall-mounted convector was installed in a laboratory room of the Engineering Building of the School of Construction Management and Engineering. Air and hot water temperatures and air speeds were measured at the entrance to the convector and in the room. The hot water temperature was controlled at 40, 60 and 80 °C. The monitoring results were later used as boundary conditions for a CFD simulation to investigate the air movement in the room. Controlled laboratory testing was conducted in laboratories at the University of Reading, UK and at Wetterstad Consultancy, Sweden. The results of the performance investigation showed that the system contributed greatly to the room heating, particularly at a water temperature of 80 °C. Also adequate fresh air was supplied to the room. Such a system is able to provide an energy efficient method of eliminating problems associated with cold winter draughts.

Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms

The method of distributing the outdoor air in classrooms has a major impact on indoor air quality and thermal comfort of pupils. In a previous study, ([11] Karimipanah T, Sandberg M, Awbi HB. A comparative study of different air distribution systems in a classroom. In: Proceedings of Roomvent 2000, vol. II, Reading, UK, 2000. p. 1013-18; [13] Karimipanah T, Sandberg M, Awbi HB, Blomqvist C. Effectiveness of confluent jets ventilation system for classrooms. In: Idoor Air 2005, Beijing, China, 2005 (to be presented).) presented results for four and two types of air distribution systems tested in a purpose built classroom with simulated occupancy as well as computational fluid dynamics (CFD) modelling. In this paper, the same experimental setup has been used to investigate the indoor environment in the classroom using confluent jet ventilation, see also ([12]Cho YJ, Awbi HB, Karimipanah T. The characteristics of wall confluent jets for ventilated enclosures. In: Proceedings of Roomvent 2004, Coimbra, Portugal, 2004.) Measurements of air speed, air temperature and tracer gas concentrations have been carried out for different thermal conditions. In addition, 56 cases of CFD simulations have been carried to provide additional information on the indoor air quality and comfort conditions throughout the classroom, such as ventilation effectiveness, air exchange effectiveness, effect of flow rate, effect of radiation, effect of supply temperature, etc., and these are compared with measured data.

Effect of internal partitioning on indoor air quality of rooms with mixing ventilation - basic study

The internal partitioning, which is frequently introduced in open-space planning due to its flexibility, was tested to study its effects on the room air quality as well as ventilation performance. For the study, physical tests using a small model room and numerical modeling using CFD computation were utilized to evaluate different test conditions employing mixing ventilation from the ceiling. The partition parameters, such as its location, height, and the gap underneath, as well as contaminant source location were tested under isothermal conditions. This paper summarizes the results from the study.

Experimental measurement and numerical simulation of horizontal-coupled slinky ground source heat exchangers

Results from both experimental measurements and 3D numerical simulations of Ground Source Heat Pump systems (GSHP) at a UK climate are presented. Experimental measurements of a horizontal-coupled slinky GSHP were undertaken in Talbot Cottage at Drayton St Leonard site, Oxfordshire, UK. The measured thermophysical properties of in situ soil were used in the CFD model. The thermal performance of slinky heat exchangers for the horizontal-coupled GSHP system for different coil diameters and slinky interval distances was investigated using a validated 3D model. Results from a two month period of monitoring the performance of the GSHP system showed that the COP decreased with the running time. The average COP of the horizontal-coupled GSHP was 2.5. The numerical prediction showed that there was no significant difference in the specific heat extraction of the slinky heat exchanger at different coil diameters. However, the larger the diameter of coil, the higher the heat extraction per meter length of soil. The specific heat extraction also increased, but the heat extraction per meter length of soil decreased with the increase of coil central interval distance.

Dynamic stall for a Vertical Axis Wind Turbine in a two-dimensional study

The last few years have proved that Vertical Axis Wind Turbines (VAWTs) are more suitable for urban areas than Horizontal Axis Wind Turbines (HAWTs). To date, very little has been published in this area to assess good performance and lifetime of VAWTs either in open or urban areas. At low tip speed ratios (TSRs<5), VAWTs are subjected to a phenomenon called 'dynamic stall'. This can really affect the fatigue life of a VAWT if it is not well understood. The purpose of this paper is to investigate how CFD is able to simulate the dynamic stall for 2-D flow around VAWT blades. During the numerical simulations different turbulence models were used and compared with the data available on the subject. In this numerical analysis the Shear Stress Transport (SST) turbulence model seems to predict the dynamic stall better than the other turbulence models available. The limitations of the study are that the simulations are based on a 2-D case with constant wind and rotational speeds instead of considering a 3-D case with variable wind speeds. This approach was necessary for having a numerical analysis at low computational cost and time. Consequently, in the future it is strongly suggested to develop a more sophisticated model that is a more realistic simulation of a dynamic stall in a three-dimensional VAWT.

The impact of urban wind environments on natural ventilation

The aim of this paper is to illustrate the impact of urban wind environments when assessing the availability of natural ventilation. A numerical study of urban airflow for a complex of five building blocks located at the University of Reading, UK is presented. The computational fluid dynamics software package ANSYS was used to simulate six typical cases of urban wind environments and the potential for natural ventilation assessed. The study highlights the impact of three typical architectural forms (street canyons, semi-enclosures and courtyards) on the local wind environment. Simulation results have also been compared with experimental data collected from six locations on the building complex. The study demonstrates that ventilation strategies formed using regional weather data, may have a propensity to over-estimate the potential for natural ventilation and cooling, due to the impact of urban form which creates a unique microclimate. Characteristics of urban wind flow patterns are presented as a guideline and can be used to assess the design and performance of natural or hybrid ventilation and the opportunity for passive cooling.