Disposable Graphite Foil Based Electrodes and Their Application in Pharmaceutical Analysis

This paper explores a new source of graphite for working electrodes, which presents advantages such as low electrical resistance, good flexibility, favorable mechanical performance, versatility to design electrodes in almost any size and very low cost. The new electrodes were investigated in batch electrochemical cells as associated with flow injection analysis systems. Cyclic voltammetry, stripping voltammetry, and amperometry associated with flow injection analysis techniques were applied for the determination of ascorbic acid, zinc and paracetamol in pharmaceutical formulations, respectively. Well-established analytical methods were applied for comparison purposes. The results herein demonstrate the potential of graphite foils as working electrodes in different electroanalytical methods, offering the possibility of producing disposable sensors for routine applications.

An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and Clogging

The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. Therefore, the SEN can be considered as a vital factor for a stable casting process and the steel quality. In addition, the steelmaking processes occur at high temperatures around 1873 K, so the interaction between the refractory materials of the SEN and molten steel is unavoidable. Therefore, the knowledge of the SEN behaviors during preheating and casting processes is necessary for the design of the steelmaking processes  The internal surfaces of modern SENs are coated with a glass/silicon powder layer to prevent the SEN graphite oxidation during preheating. The effects of the interaction between the coating layer and the SEN base refractory materials on clogging were studied. A large number of accretion samples formed inside alumina-graphite clogged SENs were examined using FEG-SEM-EDS and Feature analysis. The internal coated SENs were used for continuous casting of stainless steel grades alloyed with Rare Earth Metals (REM). The post-mortem study results clearly revealed the formation of a multi-layer accretion. A harmful effect of the SENs decarburization on the accretion thickness was also indicated. In addition, the results indicated a penetration of the formed alkaline-rich glaze into the alumina-graphite base refractory. More specifically, the alkaline-rich glaze reacts with graphite to form a carbon monoxide gas. Thereafter, dissociation of CO at the interface between SEN and molten metal takes place. This leads to reoxidation of dissolved alloying elements such as REM (Rare Earth Metal). This reoxidation forms the “In Situ” REM oxides at the interface between the SEN and the REM alloyed molten steel. Also, the interaction of the penetrated glaze with alumina in the SEN base refractory materials leads to the formation of a high-viscous alumina-rich glaze during the SEN preheating process. This, in turn, creates a very uneven surface at the SEN internal surface. Furthermore, these uneven areas react with dissolved REM in molten steel to form REM aluminates, REM silicates and REM alumina-silicates. The formation of the large “in-situ” REM oxides and the reaction of the REM alloying elements with the previously mentioned SEN´s uneven areas may provide a large REM-rich surface in contact with the primary inclusions in molten steel. This may facilitate the attraction and agglomeration of the primary REM oxide inclusions on the SEN internal surface and thereafter the clogging. The study revealed the disadvantages of the glass/silicon powder coating applications and the SEN decarburization. The decarburization behaviors of Al2O3-C, ZrO2-C and MgO-C refractory materials from a commercial Submerged Entry Nozzle (SEN), were also investigated for different gas atmospheres consisting of CO2, O2 and Ar. The gas ratio values were kept the same as it is in a propane combustion flue gas at different Air-Fuel-Ratio (AFR) values for both Air-Fuel and Oxygen-Fuel combustion systems. Laboratory experiments were carried out under nonisothermal conditions followed by isothermal heating. The decarburization ratio (α) values of all three refractory types were determined by measuring the real time weight losses of the samples. The results showed the higher decarburization ratio (α) values increasing for MgO-C refractory when changing the Air-Fuel combustion to Oxygen-Fuel combustion at the same AFR value. It substantiates the SEN preheating advantage at higher temperatures for shorter holding times compared to heating at lower temperatures during longer holding times for Al2O3-C samples. Diffusion models were proposed for estimation of the decarburization rate of an Al2O3-C refractory in the SEN. Two different methods were studied to prevent the SEN decarburization during preheating: The effect of an ZrSi2 antioxidant and the coexistence of an antioxidant additive and a (4B2O3 ·BaO) glass powder on carbon oxidation for non-isothermal and isothermal heating conditions in a controlled atmosphere. The coexistence of 8 wt% ZrSi2 and 15 wt% (4B2O3 ·BaO) glass powder of the total alumina-graphite refractory base materials, presented the most effective resistance to carbon oxidation. The 121% volume expansion due to the Zircon formation during heating and filling up the open pores by a (4B2O3 ·BaO) glaze during the green body sintering led to an excellent carbon oxidation resistance. The effects of the plasma spray-PVD coating of the Yttria Stabilized Zirconia (YSZ) powder on the carbon oxidation of the Al2O3-C coated samples were investigated. Trials were performed at non-isothermal heating conditions in a controlled atmosphere. Also, the applied temperature profile for the laboratory trials were defined based on the industrial preheating trials. The controlled atmospheres consisted of CO2, O2 and Ar. The thicknesses of the decarburized layers were measured and examined using light optic microscopy, FEG-SEM and EDS. A 250-290 μm YSZ coating is suggested to be an appropriate coating, as it provides both an even surface as well as prevention of the decarburization even during heating in air. In addition, the interactions between the YSZ coated alumina-graphite refractory base materials in contact with a cerium alloyed molten stainless steel were surveyed. The YSZ coating provided a total prevention of the alumina reduction by cerium. Therefore, the prevention of the first clogging product formed on the surface of the SEN refractory base materials. Therefore, the YSZ plasma-PVD coating can be recommended for coating of the hot surface of the commercial SENs.

You know how I know you're gay? : masculinity and homophobia in mainstream comedy

You Know How I Know You're Gay?: Masculinity and Homophobia in Contemporary Mainstream Comedy is a three-part senior scholars project that consists of a critical analysis of homophobic humor in contemporary mainstream comedy, an original feature-length comedy script entitled Don 't Be that Freshman, and a DVD of selected scenes from Don't Be that Freshman. The critical analysis first establishes the existence of homophobic humor in mainstream comedy and then links this homophobia to masculine anxiety, applying the ideas set forth in Michael Kimmel's essay, "Masculinity as Homophobia," to contemporary, mainstream, homosocial comedies. The paper goes on to examine audience reactions to this homophobic humor, focusing on audience members who enjoy these movies, yet consider themselves to be accepting of homosexuality and against homophobia. I discuss ways of resistance and the importance of opposing homophobic humor, and finally, I look at comedy as a potentially transgressive medium that could be used to fight homophobia and social inequality. The critical analysis, therefore, leads into Don't Be that Freshman, a film that uses progressive humor to oppose homophobia and expose the potential dangers and pitfalls of conforming to social constructions of gender. Don't Be that Freshman is a film about three pairs of college roommates in their first semester at college who become each other's first friends on campus. It is a character-driven comedy that attempts to normalize non-heterosexual sexual orientation and gender non-conformity, to advocate a type of living that does not conform to problematic social constructions and cultural ideologies, and at the same time to appeal to a mainstream audience. The film version is twenty-five minutes long and consists of ten scenes from the script.

Expressão de uma quitinase de Metarhizium anisopliae em Nicotiana tabacum : obtenção de plantas transgênicas resistentes a doenças fúngicas

A resistência a doenças em plantas transgênicas tem sido obtida por meio da expressão de genes isolados de bactérias, fungos micoparasitas e plantas. Neste trabalho, relatamos a utilização de um gene do fungo entomopatogênico Metarhizium anisopliae como modo de gerar resistência a doenças fúngicas em plantas. O gene chit1 codifica a quitinase CHIT42 (EC 3.2.1.14), pertencente a uma classe de glicosil-hidrolases capazes de converter quitina em oligômeros de N-acetil-glicosamina (NAcGlc). Quando presentes em tecidos vegetais, supõese que as quitinases ataquem especificamente a parede celular de fungos invasores, provocando danos às hifas e causando a morte por lise das células fúngicas. Deste modo, dois diferentes grupos de plantas transgênicas de Nicotiana tabacum foram produzidos: no primeiro deles, denominado chitplus, os indivíduos possuem o gene chit1 sob o controle do promotor CaMV 35S. O segundo grupo, demoninado chitless, consiste de plantas transformadas com um T-DNA não contendo o gene do fungo. Trinta e quatro plantas transgênicas resistentes à canamicina (17 de cada grupo) foram regeneradas a partir de discos de folhas infectados por Agrobacterium tumefaciens. A produção da quitinase em extratos protéicos de folhas foi analisada por zimogramas em SDS-PAGE contendo glicol-quitina e corados por calcoflúor branco, na forma de um screening dos transgênicos primários. As plantas transgênicas foram testadas, ainda, por meio de ensaios colorimétricos empregando oligômeros sintéticos de NAcGlc como substratos específicos, além de immunoblot e Western blot com soro anti-quitinase. A quantidade de enzima recombinante nas plantas chitplus variou desde nenhuma atividade detectável a elevados níveis de expressão da enzima. A hibridização de Southern blot demonstrou que o número de cópias do gene chit1 integradas no genoma vegetal foi estimado entre uma e quatro. A primeira geração de plantas transgênicas geradas por autofecundação de parentais portadores de duas cópias do transgene foi testada com relação à estabilidade da herança do transgene e em 43 de um total de 67 descendentes, originados de quatro cruzamentos independentes, o padrão de segregação não diferiu das proporções Mendelianas esperadas. Ensaios de resistência, desafiando as plantas transgênicas com o basidiomiceto Rhizoctonia solani foram realizados e uma evidente diminuição da área foliar contendo lesões fúngicas foi observada entre as linhagens transgênicas, embora variações na atividade quitinolítica tenham influenciado o nível de resistência. Nossos resultados sugerem uma relação direta entre a atividade específica de quitinase e ao aumento nos níveis de resistência às lesões causadas pela infecção por R. solani.

Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma

SILVA, J. S. P. Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma. 2008. 119 f. Tese (Doutorado) - Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2008.

Avaliação do estresse oxidativo induzido por superfícies de titânio

Commercially pure Titanium (cp Ti) is a material largely used in orthopedic and dental implants due to its biocompatibility properties. Changes in the surface of cp Ti can determine the functional response of the cells such as facilitating implant fixation and stabilization, and increased roughness of the surface has been shown to improve adhesion and cellular proliferation. Various surface modification methods have been developed to increase roughness, such as mechanical, chemical, electrochemical and plasma treatment. An argon plasma treatment generates a surface that has good mechanical proprieties without chemical composition modification. Besides the topography, biological responses to the implant contribute significantly to its success. Oxidative stress induced by the biomaterials is considered one of the major causes of implant failure. For this reason the oxidative potential of titanium surfaces subjected to plasma treatment was evaluated on this work. CHO-k1 cells were cultivated on smooth or roughed Ti disks, and after three days, the redox balance was investigated measuring reactive oxygen species (ROS) generation, total antioxidant capacity and biomarkers of ROS attack. The results showed cells grown on titanium surfaces are subjected to intracellular oxidative stress due to hydrogen peroxide generation. Titanium discs subjected to the plasma treatment induced less oxidative stress than the untreated ones, which resulted in improved cellular ability. Our data suggest that plasma treated titanium may be a more biocompatible biomaterial.

Efeito do tratamento térmico do titânio sobre a proliferação de células pré-osteoblásticas

Titanium is a biomaterial widely employed in biomedical applications (implants, prostheses, valves, stents). Several heat treatments are usually used in order to obtain physical properties required to different applications. This work studied the influence of the heat treatment on microstructure of commercial pure titanium, and their consequences in growth and proliferation of MC3T3-E1 cells. Discs of titanium were treated in different temperatures, and characterized by optical microscopy, image analysis, wettabillity, roughness, hardness and X-ray diffraction. After the heat treatment, significant modifications in these properties were observed. Pattern images of titanium, before and after the cell culture, were compared by overlapping to analyze the influence of microstructure in microstructure and preferences guidance cells. However, in general, titanium discs that showed a higher residual strength also presented an increase of cells numbers on surface

Tratamento termoquímico do titânio auxiliado por plasma de ar - N2 - O2

Discs were grade II cp Ti oxynitride by plasma of Ar - N2 - O2 using different proportions of individual gases. These ratios were established from analysis of optical emission spectroscopy (OES) of plasma species. The proportions that resulted in species whose spectra showed an abrupt change of light intensity were chosen for this study. Nanohardness tests revealed that there was a correlation between the intensity of N2 + species with the hardness, because the treatments where they had a higher intensity, obtained a higher value nanohardness, although the crystalline phases have remained unchanged. With respect to topography, it was observed that in general, the surface roughness is related to the intensities of plasma species, because they may have different values depending on the behavior of the species. Images obtained by optical microscopy revealed a surface with grains of different colors to optical reflectance showed a peak of reflection in the red area. Measures the contact angle and surface tension showed hydrophilic properties and hydrophilic with little variation of polar and dispersive components of surface tension

Contribuição da Geodésia ao monitoramento costeiro do Litoral Setentrional do Rio Grande do Norte, área de influência da indústria petrolífera

The general objective of this thesis has been seasonal monitoring (quarterly time scale) of coastal and estuarine areas of a section of the Northern Coast of Rio Grande do Norte, Brazil, environmentally sensitive and with intense sediment erosion in the oil activities to underpin the implementation of projects for containment of erosion and mitigate the impacts of coastal dynamics. In order to achieve the general objective, the work was done systematically in three stages which consisted the specific objectives. The first stage was the implementation of geodetic reference infrastructure for carrying out the geodetic survey of the study area. This process included the implementation of RGLS (Northern Coast of the RN GPS Network), consisting of stations with geodetic coordinates and orthometric heights of precision; positioning of Benchmarks and evaluation of the gravimetric geoid available, for use in GPS altimetry of precision; and development of software for GPS altimetry of precision. The second stage was the development and improvement of methodologies for collection, processing, representation, integration and analysis of CoastLine (CL) and Digital Elevation Models (DEM) obtained by geodetic positioning techniques. As part of this stage have been made since, the choice of equipment and positioning methods to be used, depending on the required precision and structure implanted, and the definition of the LC indicator and of the geodesic references best suited, to coastal monitoring of precision. The third step was the seasonal geodesic monitoring of the study area. It was defined the execution times of the geodetic surveys by analyzing the pattern of sediment dynamics of the study area; the performing of surveys in order to calculate and locate areas and volumes of erosion and accretion (sandy and volumetric sedimentary balance) occurred on CL and on the beaches and islands surfaces throughout the year, and study of correlations between the measured variations (in area and volume) between each survey and the action of the coastal dynamic agents. The results allowed an integrated study of spatial and temporal interrelationships of the causes and consequences of intensive coastal processes operating in the area, especially to the measurement of variability of erosion, transport, balance and supply sedimentary over the annual cycle of construction and destruction of beaches. In the analysis of the results, it was possible to identify the causes and consequences of severe coastal erosion occurred on beaches exposed, to analyze the recovery of beaches and the accretion occurring in tidal inlets and estuaries. From the optics of seasonal variations in the CL, human interventions to erosion contention have been proposed with the aim of restoring the previous situation of the beaches in the process of erosion.

Incidência de fungos em pós-colheita de banana 'Prata anã'(Musa AAB)

Este trabalho teve por objetivo determinar a ocorrência e a freqüência de fungos em banana 'Prata anã' e elucidar o agente causal das podridões em pós-colheita de frutos provenientes do norte de Minas Gerais. Dois métodos de isolamento foram adotados: diluição em placas, a partir da lavagem de frutos verdes, e direto de frutos maduros. Os fungos Colletotrichum musae, Trichoderma harzianum, Fusarium equisetii, Penicillium sp. Aspergillus parasiticus, Trichothecium roseum, Colletotrichum acutatum, Alternaria sp., Cladosporium musae e Curvularia lunata foram os mais freqüentemente associados aos frutos. A patogenicidade desses fungos foi testada pela substituição de discos da casca de frutos verdes por discos de micélio. Colletotrichum musae apresentou área média lesionada em torno do ponto de inoculação igual a 5,8 cm², enquanto para os demais fungos testados não passou de 1,50 cm². Os resultados mostraram que C. musae é o agente primário das podridões dos frutos examinados com 100 % de incidência e os demais fungos limitaram-se a necrosar os ferimentos em torno do ponto de inoculação. O modo de infecção latente, causada por C. musae, parece favorecer, primeiramente, a colonização interna dos tecidos e, posteriormente, a ação dos fungos oportunistas, que aceleram as podridões nos frutos e na coroa.

Novo sistema de aplicação de drogas em cirurgias oftalmológicas

The topical corneal application of antimitotic mitomycin-C (MMC) during refractive surgery is still characterized by a lack of standardization and considerable empirism. For this reason the creation of a system capable of reliable drug delivery represents a beneficial innovation for patients submitted to these procedures. Objective: Elaborate a new MMC delivery system during the transoperatory period of photorefractive keratectomy (PRK) followed by patent application. Methods: The project consists of an in vitro experimental study to create an MMC (0.02%) release system. The drug was impregnated in sterile Whatman® 41 paper filter discs with a diameter of 8 mm. After drying, the discs were applied to antibiogram plates seeded with Staphylococcus epidermidis (American Type Culture Collection ATCC 12228), followed by the addition of a drop of sterile water. At the end of 1 minute, the discs were removed and the plates incubated for 48 hours at 35oC. Mean drop volume in the collyrium flasks was measured using analytical balance weighing. The inhibition halo (mm) was correlated with the MMC impregnated into the disc. After completion of the invention design a patent application was lodged at the National Institute of Industrial Property. Results: The correspondence between MMC-produced inhibition halos indicated that a dose of 16μg was ideal for impregnating into the discs. The mean drop volume obtained from the collyrium flasks was 37.7 μL. A minute after the application of one drop of balanced saline solution, the system released an adequate concentration for PRK surgery. Conclusion: A new MMC delivery system was created for transoperatory application in photorefractive keratectomy (PRK). Publication of the patent application (number PI 0704739-8) gives the authors exclusive intellectual property rights. The study was sponsored by Ophthalmos Indústria e Comércio de Produtos Farmacêuticos S.A. (São Paulo-SP, Brazil) and received the indispensable scientific contribution of researchers from the fields of Pharmacy, Medicine, Biology, Statistics and Law, characterizing the work as multidisciplinary, in accordance with norms established by the Postgraduate Health Sciences Program of the Federal University of Rio Grande do Norte (UFRN)

Semeadora-adubadora: mecanismos de corte de palha e cargas verticais aplicadas

This work had as objective to evaluate the performance of mechanisms of cutting of the no-tillage seedrills in different vegetable coverings and applied vertical loads. The experimental design used was in randomized blocks and factorial scheme 3 x 4, with four replications. The trials were accomplished with three different mechanisms of culting of the straw (plane disc, corrugated disc and wavy disc), using four different vertical loads (750, 1500, 2250 and 3000 N). All treatments were accomplished in five straw coverings (corn, sorghum, triticale, black oats and radish). The results showed that larger the amount of dry matter covering the soil, higher the demand of horizontal and vertical forces. The wavy disc promotes the largest values of area of mobilized soil and requires large horizontal force, vertical force and horizontal force per area of cutting depth of discs (specific force). The treatment with plane disc required higher values of the horizontal forces per area of mobilized soil and of vertical force in the corn and sorghum coverings.

Desenvolvimento de Oligonychus ilicis em Coffea canephora sob diferentes temperaturas

Oligonychus ilicis (McGregor) (Acari) (Tetranychidae) é uma das principais pragas de Coffea canephora Pierre & Froehner. Neste trabalho, avaliou-se o efeito de diferentes temperaturas no desenvolvimento desse ácaro-vermelho em folhas de C. canephora, em laboratório. Confinaram-se 80 fêmeas em 40 arenas, constituídas de disco foliar de 4 cm, para oviposição nas temperaturas de 21, 24, 27, 30 e 33 ºC. Foram selecionados ao acaso pelo menos dois ovos para avaliar o desenvolvimento embrionário. Após a eclosão da larva, foram realizadas avaliações a cada 12 horas para obtenção da duração e sobrevivência larval. Para avaliar a longevidade foi transferido um ácaro macho da criação para as arenas com uma fêmea para acasalamento. O limite térmico de desenvolvimento inferior e a constante térmica foram determinados para a duração do desenvolvimento de ovo a adulto. O tempo de desenvolvimento das fases imaturas diminuiu com o aumento da temperatura. As fases de ovo, larva, protocrisálida, protoninfa, deutocrisálida, deutoninfa e teleiocrisálida variaram, respectivamente, de 10,4 a 4,3; 2,4 a 1,2; 2,0 a 1,0; 2,3 a 1,2; 1,9 a 1,0; 3,0 a 1,5 e 2,3 a 1,0 dias. O aumento da temperatura afetou o período de desenvolvimento, reduzindo a duração de ovo-adulto e a longevidade. O limite térmico inferior foi de 9,0 ºC para o período de ovo-adulto e constante térmica de 256,4 graus-dias. em condições de laboratório, a faixa de temperatura que favorece o desenvolvimento do ácaro em C. canephora foi de 24 a 30 ºC. O limite térmico inferior não é limitante para ocorrência de O. ilicis em áreas cultivadas com C. canephora no estado do Espírito Santo.

Influência de genótipos de couve (Brassica oleracea L. var. acephala DC.) na biologia de Plutella xylostella (L., 1758) (Lepidoptera: Plutellidae)

Objetivou-se, com este trabalho, avaliar a influência de alguns genótipos de couve (Brassica oleracea L. var. acephala DC.) no desenvolvimento de Plutella xylostella (L., 1758) (Lepidoptera: Plutellidae). Os genótipos avaliados foram: Manteiga de Ribeirão Pires I-2620, Roxa I-919, Manteiga de São José, Manteiga de Monte Alegre, Pires 2 de Campinas, Couve Comum, Couve de Arthur Nogueira 2, Couve de Arthur Nogueira 1. Lagartas recém-eclodidas foram mantida em discos foliares de 8 cm de diâmetro para cada genótipo. Foram analisados os seguintes parâmetros: duração e viabilidade das fases larval e pupal, longevidade e fecundidade de adultos, utilizando análises paramétricas e de agrupamentos para interpretação dos dados. Observou-se um prolongamento em dias no ciclo de P. xylostella, aumento no peso de pupa e maiores valores de viabilidade e fecundidade, durante a segunda geração. O genótipo Couve de Arthur Nogueira 2 foi menos favorável ao desenvolvimento de P. xylostella nas duas gerações, e Couve Comum demonstrou maior influência negativa ao inseto na segunda geração. Manteiga de Ribeirão Pires I-2620 foi o mais suscetível nas duas gerações, agrupando com este na segunda geração Pires 2 de Campinas e Manteiga de São José.

Caracterização de Diaporthe citri em diferentes meios de cultura, condições de temperatura e luminosidade

Estudou-se o crescimento micelial de dez isolados de Diaporthe citri, utilizando-se seis meios de cultura (aveia-ágar, maltose-peptona-ágar, batata-dextrose-ágar, folha de laranja-dextrose-ágar, folha de limão-dextrose-ágar, milho-ágar) à temperatura de 22 ± 2 °C e fotoperíodo de 12 h claro/12 h escuro. O cultivo em meio de batata-dextrose-ágar (BDA) foi conduzido em cinco temperaturas diferentes (10, 15, 20, 25 e 30 °C). Três diferentes regimes de luminosidade (12 h claro/12 h escuro, claro contínuo, escuro contínuo) foram utilizados para verificar o crescimento do fungo. Foram observadas variações na produção de picnídios e de massa micelial nos diferentes meios de cultura, temperaturas e regimes de luminosidade testados, sendo que, para a maioria dos isolados, o meio de cultura de aveia-ágar, a faixa de 20 a 25 °C e o regime de claro contínuo induziram maior crescimento micelial. A produção de picnídios foi maior para o regime de luz contínua. O teste de patogenicidade foi feito por inoculação de discos de micélio de 5 mm de diâmetro em ferimentos em ramos e caule de limão 'Feminelo' (Citrus limon) enxertado em citrumelo 'Swingle'(Poncirus trifoliolata x Citrus paradisi) e plantas de limão 'Cravo' (C. limonia) enxertados com laranja 'Valência' (C. sinensis). Após sete dias, houve o aparecimento de exsudação de goma nas plantas inoculadas com os isolados, mas não na testemunha. Todos os isolados mostraram-se patogênicos, sendo os isolados PC2 e PC5, os que causaram comprimento de lesão maior nas plantas.