Electrochemically prepared polypyrrole-2-carboxylic acid films: synthesis protocols and studies on biosensors

The process for obtaining polypyrrole-2-carboxylic acid (PPY-2-COOH) films in acetonitrile was investigated using cyclic voltammetry, electrochemical quartz crystal microgravimetry (EQCM), and infrared spectroscopy (FTIR). Different potential ranges were applied during cyclic voltammetry experiments with the aim of obtaining films without and with the presence of controlled amounts of water added in acetonitrile. The FTIR spectra of the films have evidenced that cations and anions from the electrolyte solution were incorporated into the PPY-2-COOH structure, with a preferential adsorption of cations. After chemically immobilizing polyphenoloxidase (tyrosinase, PPO), PPY-2-COOH/PPO films were build for amperometric detection of catechol, establishing a linear limit of concentrations ranging from 5.0 x 10-4 to 2.5 x 10-2 mol L-1.

I giudici del CSM. Il regime giuridico degli atti del CSM sullo status dei magistrati

L’elaborato è dedicato all’esame della forma di emanazione e del sistema d’impugnazione degli atti del CSM circa la carriera giuridica dei magistrati, con particolare attenzione alle numerose implicazioni di livello costituzionale ed amministrativo sollevate dalla problematica. I principali obiettivi perseguiti sono: a) la verifica della costituzionalità del sistema predisposto dalla legge 24 marzo 1958, n. 195, la quale stabilisce che i provvedimenti consiliari siano emanati con decreto presidenziale o ministeriale e che possano essere sindacati dai giudici amministrativi; b) l’individuazione e la risoluzione delle ambiguità interpretative e dei dubbi applicativi che sono emersi fin dall’introduzione della legge in parola e che tutt’ora continuano costantemente a riproporsi, non avendo trovato compiuta sistemazione né in dottrina né in giurisprudenza; c) la ricognizione e l’esame critico della prassi giurisprudenziale, specialmente in ordine alle decisioni più recenti, tenuto conto della mancanza di studi aggiornati in merito pur a fronte dell’ampio numero di pronunce. Sulla base dell’ipotesi di partenza dell’irrinunciabilità, per la piena comprensione della portata precettiva della legge sopra citata, di un’esaustiva analisi delle premesse teoriche necessarie per una piena comprensione dello stessa, lo svolgimento è sostanzialmente articolato in due parti fondamentali. La prima incentrata sulla ricostruzione del perimetro costituzionale dell’indagine, con specifico riferimento all’assetto costituzionale della Magistratura. La seconda, riconducibile nell’alveo proprio del “diritto amministrativo”, concernente a) il significato e la funzione da attribuire alla forma di emanazione degli atti consiliari; b) i poteri ministeriali e presidenziali nella fase di esternazione; c) la tipologia degli atti impugnabili e dei vizi sindacabili in sede giurisdizionale. Con la consapevolezza che lo sviluppo dell’argomento prescelto rappresenta un’angolazione di visuale privilegiata relativamente allo svolgersi dei rapporti tra Potere Esecutivo ed Ordine giudiziario, la tesi affronta complesse questioni di carattere generale quali il principio di separazione dei poteri, il concetto di organo costituzionale e quello di autodichìa, la nozione di autonomia pubblica, i princìpi di imparzialità ed uguaglianza. Il vaglio della giurisprudenza costituzionale ed amministrativa, ampiamente richiamata, è condotto trattando a fondo, sia aspetti connotati da un elevato tasso di tecnicità, come la disciplina del conferimento d’incarichi direttivi, sia interrogativi concernenti diversi aspetti problematici. Segnatamente, l’indagine ha riguardato – tra l’altro – l’ammissibilità del sindacato del giudice amministrativo sugli atti “amministrativi” delle autorità non incardinate nella P.A.; la compatibilità dell’interpretazione evolutiva con l’art. 138 Cost.; la definizione di atto amministrativo; la stessa nozione costituzionale di pubblica amministrazione. La presa d’atto della tendenza giurisprudenziale ad estendere il sindacato al vizio di eccesso di potere conduce infine ad alcune riflessioni conclusive in merito alla conciliabilità del ruolo assunto dal giudice amministrativo col quadro normativo delineato dai Costituenti.

Influence of pollination and seed dispersal on the genetic population structure of two Commiphora species in Madagascar and South Africa

Pollination and seed dispersal are important ecological processes for the regeneration of plant populations and both vectors for gene exchange between plant populations. For my thesis, I studied the pollination ecology of the South African tree Commiphora harveyi (Burseraceae) and compared it with C. guillauminii from Madagascar. Both species have low visitation rates and a low number of pollinating insect species, resulting in a low fruit set. While their pollination ecology is very similar, they differ in their seed dispersal with a low seed dispersal rate in the Malagasy and a high seed dispersal rate in the South African species. This should be reflected in a stronger genetic differentiation among populations in the Malagasy than in the South African species. My results, based on AFLP markers, contradict these expectations, the overall differentiation was lower in the Malagasy (FST = 0.05) than in the South African species (FST = 0.16). However, at a smaller spatial scale (below 3 km), the Malagasy species was genetically more strongly differentiated than the South African species, which was reflected by the high inter-population variance within the sample site (C. guillauminii: 72.2 - 85.5 %; C. harveyi: 8.4 - 14.5 %). This strong differentiation could arise from limited gene flow, which was confirmed by spatial autocorrelation analyses. The shape of the autocorrelogram suggested that gene exchange between individuals occurred only up to 3 km in the Malagasy species, whereas up to 30 km in the South African species. These results on the genetic structure correspond to the expectations based on seed dispersal data. Thus, seed dispersal seems to be a key factor for the genetic structure in plant populations on a local scale.

An interactive surgical planning tool for acetabular fractures: initial results

Background Acetabular fractures still are among the most challenging fractures to treat because of complex anatomy, involved surgical access to fracture sites and the relatively low incidence of these lesions. Proper evaluation and surgical planning is necessary to achieve anatomic reduction of the articular surface and stable fixation of the pelvic ring. The goal of this study was to test the feasibility of preoperative surgical planning in acetabular fractures using a new prototype planning tool based on an interactive virtual reality-style environment. Methods 7 patients (5 male and 2 female; median age 53 y (25 to 92 y)) with an acetabular fracture were prospectively included. Exclusion criterions were simple wall fractures, cases with anticipated surgical dislocation of the femoral head for joint debridement and accurate fracture reduction. According to the Letournel classification 4 cases had two column fractures, 2 cases had anterior column fractures and 1 case had a T-shaped fracture including a posterior wall fracture. The workflow included following steps: (1) Formation of a patient-specific bone model from preoperative computed tomography scans, (2) interactive virtual fracture reduction with visuo-haptic feedback, (3) virtual fracture fixation using common osteosynthesis implants and (4) measurement of implant position relative to landmarks. The surgeon manually contoured osteosynthesis plates preoperatively according to the virtually defined deformation. Screenshots including all measurements for the OR were available. The tool was validated comparing the preoperative planning and postoperative results by 3D-superimposition. Results Preoperative planning was feasible in all cases. In 6 of 7 cases superimposition of preoperative planning and postoperative follow-up CT showed a good to excellent correlation. In one case part of the procedure had to be changed due to impossibility of fracture reduction from an ilioinguinal approach. In 3 cases with osteopenic bone patient-specific prebent fixation plates were helpful in guiding fracture reduction. Additionally, anatomical landmark based measurements were helpful for intraoperative navigation. Conclusion The presented prototype planning tool for pelvic surgery was successfully integrated in a clinical workflow to improve patient-specific preoperative planning, giving visual and haptic information about the injury and allowing a patient-specific adaptation of osteosynthesis implants to the virtually reduced pelvis.

Mesh shrinkage and pain in laparoscopic ventral hernia repair: a randomized clinical trial comparing suture versus tack mesh fixation

Mesh fixation during laparoscopic ventral hernia repair can be performed using transfascial sutures or metal tacks. The aim of the present study is to compare mesh shrinkage and pain between two different techniques of mesh fixation in a prospective randomized trial.

Clinical experience with the ATS 3f Enable® Sutureless Bioprosthesis

The ATS 3f Enable® Bioprosthesis is a self-expanding valve with a tubular design that allows for decreased leaflet stress and preservation of aortic sinuses. We report the midterm results of a prospective, multicenter clinical study evaluating the safety and efficacy of this stented bioprosthesis in patients undergoing isolated aortic valve replacement with or without concomitant procedures.