Assessment of Collimator Jaw Optimization in Reducing Normal Tissue Irradiation with Intensity Modulated Radiation Therapy

Purpose: To evaluate normal tissue dose reduction in step-and-shoot intensity-modulated radiation therapy (IMRT) on the Varian 2100 platform by tracking the multileaf collimator (MLC) apertures with the accelerator jaws. Methods: Clinical radiation treatment plans for 10 thoracic, 3 pediatric and 3 head and neck patients were converted to plans with the jaws tracking each segment’s MLC apertures. Each segment was then renormalized to account for the change in collimator scatter to obtain target coverage within 1% of that in the original plan. The new plans were compared to the original plans in a commercial radiation treatment planning system (TPS). Reduction in normal tissue dose was evaluated in the new plan by using the parameters V5, V10, and V20 in the cumulative dose-volume histogram for the following structures: total lung minus GTV (gross target volume), heart, esophagus, spinal cord, liver, parotids, and brainstem. In order to validate the accuracy of our beam model, MLC transmission measurements were made and compared to those predicted by the TPS. Results: The greatest change between the original plan and new plan occurred at lower dose levels. The reduction in V20 was never more than 6.3% and was typically less than 1% for all patients. The reduction in V5 was 16.7% maximum and was typically less than 3% for all patients. The variation in normal tissue dose reduction was not predictable, and we found no clear parameters that indicated which patients would benefit most from jaw tracking. Our TPS model of MLC transmission agreed with measurements with absolute transmission differences of less than 0.1 % and thus uncertainties in the model did not contribute significantly to the uncertainty in the dose determination. Conclusion: The amount of dose reduction achieved by collimating the jaws around each MLC aperture in step-and-shoot IMRT does not appear to be clinically significant.

IN-VIVO CT DOSIMETRY DURING VIRTUAL COLONOSCOPY

Virtual colonoscopy (VC) is a minimally invasive means for identifying colorectal polyps and colorectal lesions by insufflating a patient’s bowel, applying contrast agent via rectal catheter, and performing multi-detector computed tomography (MDCT) scans. The technique is recommended for colonic health screening by the American Cancer Society but not funded by the Centers for Medicare and Medicaid Services (CMS) partially because of potential risks from radiation exposure. To date, no in‐vivo organ dose measurements have been performed for MDCT scans; thus, the accuracy of any current dose estimates is currently unknown. In this study, two TLDs were affixed to the inner lumen of standard rectal catheters used in VC, and in-vivo rectal dose measurements were obtained within 6 VC patients. In order to calculate rectal dose, TLD-100 powder response was characterized at diagnostic doses such that appropriate correction factors could be determined for VC. A third-order polynomial regression with a goodness of fit factor of R2=0.992 was constructed from this data. Rectal dose measurements were acquired with TLDs during simulated VC within a modified anthropomorphic phantom configured to represent three sizes of patients undergoing VC. The measured rectal doses decreased in an exponential manner with increasing phantom effective diameter, with R2=0.993 for the exponential regression model and a maximum percent coefficient of variation (%CoV) of 4.33%. In-vivo measurements yielded rectal doses ranged from that decreased exponentially with increasing patient effective diameter, in a manner that was also favorably predicted by the size specific dose estimate (SSDE) model for all VC patients that were of similar age, body composition, and TLD placement. The measured rectal dose within a younger patient was favorably predicted by the anthropomorphic phantom dose regression model due to similarities in the percentages of highly attenuating material at the respective measurement locations and in the placement of the TLDs. The in-vivo TLD response did not increase in %CoV with decreasing dose, and the largest %CoV was 10.0%.

THE MECHANISM OF TUMORIGENESIS IN THE IMMORTALIZED HUMAN PANCREATIC CELL LINES: CELL CULTURE MODELS OF HUMAN PANCREATIC CANCER

The mechanism of tumorigenesis in the immortalized human pancreatic cell lines: cell culture models of human pancreatic cancer Pancreatic ductal adenocarcinoma (PDAC) is the most lethal cancer in the world. The most common genetic lesions identified in PDAC include activation of K-ras (90%) and Her2 (70%), loss of p16 (95%) and p14 (40%), inactivation p53 (50-75%) and Smad4 (55%). However, the role of these signature gene alterations in PDAC is still not well understood, especially, how these genetic lesions individually or in combination contribute mechanistically to human pancreatic oncogenesis is still elusive. Moreover, a cell culture transformation model with sequential accumulation of signature genetic alterations in human pancreatic ductal cells that resembles the multiple-step human pancreatic carcinogenesis is still not established. In the present study, through the stepwise introduction of the signature genetic alterations in PDAC into the HPV16-E6E7 immortalized human pancreatic duct epithelial (HPDE) cell line and the hTERT immortalized human pancreatic ductal HPNE cell line, we developed the novel experimental cell culture transformation models with the most frequent gene alterations in PDAC and further dissected the molecular mechanism of transformation. We demonstrated that the combination of activation of K-ras and Her2, inactivation of p16/p14 and Smad4, or K-ras mutation plus p16 inactivation, was sufficient for the tumorigenic transformation of HPDE or HPNE cells respectively. We found that these transformed cells exhibited enhanced cell proliferation, anchorage-independent growth in soft agar, and grew tumors with PDAC histopathological features in orthotopic mouse model. Molecular analysis showed that the activation of K-ras and Her2 downstream effector pathways –MAPK, RalA, FAK, together with upregulation of cyclins and c-myc were involved in the malignant transformation. We discovered that MDM2, BMP7 and Bmi-1 were overexpressed in the tumorigenic HPDE cells, and that Smad4 played important roles in regulation of BMP7 and Bmi-1 gene expression and the tumorigenic transformation of HPDE cells. IPA signaling pathway analysis of microarray data revealed that abnormal signaling pathways are involved in transformation. This study is the first complete transformation model of human pancreatic ductal cells with the most common gene alterations in PDAC. Altogether, these novel transformation models more closely recapitulate the human pancreatic carcinogenesis from the cell origin, gene lesion, and activation of specific signaling pathway and histopathological features.

Contrasting growth and water use efficiency after thinning in mixed Abies pinsapo–Pinus pinaster–Pinus sylvestris forests

Foresters frequently lack sufficient information about thinning intensity effects to optimize semi-natural forest management and their effects and interaction with climate are still poorly understood. In an Abies pinsapo–Pinus pinaster–Pinus sylvestris forest with three thinning intensities, a dendrochronologial approach was used to evaluate the short-term responses of basal area increment (BAI), carbon isotope (δ13C) and water use efficiency (iWUE) to thinning intensity and climate. Thinning generally increased BAI in all species, except for the heavy thinning in P. sylvestris. Across all the plots, thinning increased 13C-derived water-use efficiency on average by 14.49% for A. pinsapo, 9.78% for P. sylvestris and 6.68% for P. pinaster, but through different ecophysiological mechanisms. Our findings provide a robust mean of predicting water use efficiency responses from three coniferous species exposed to different thinning strategies which have been modulated by climatic conditions over time.

Development of a 3D Game Engine

This paper presents the development history and specification of a 3D game engine titled "Spark Engine". The term "engine" is used to describe a complex graphics software suite that streamlines application development and provides efficient rendering functionality. A game engine specifically provides tools to simplify game development. Spark Engine is fully shader driven and is built on top of Microsoft's XNA Framework. It is a reusable and flexible platform that can be used to build any type of graphics application ranging from gaming to simulation. The engine was released as open source software under the New BSD License with an interest in furthering its development.

Predator-Induced Plasticity in Spotted Salamanders (Ambystoma maculatum)

The ability to respond plastically to the environment has allowed amphibians to evolve adaptive responses to spatial and temporal variation in predation threat. However, animals exposed to predators may also show costs of plasticity or tradeoffs. This study examines predator-induced plasticity in larval development, behavior, and metamorphosis in the spotted salamander, Ambystoma maculatum. Salamanders were raised in two treatments: with predator cues (a fish predator, genus Lepomis, on the other side of a divided tank), or without predator cues. During the larval stage the predator treatment group experienced higher mortality rates than the no-predator treatment group. Behavioral trials revealed that predator treatment animals ate less than those not exposed, and that this feeding response was immediately inducible and had lasting effects. Animals in the predator treatment group had smaller tail areas during the mid-larval period. Feeding and body size effects may have contributed to increased mortality in the predator-treatment animals. The timing of metamorphic onset was not affected by the presence of predators, but predator-treatment salamanders had shorter snout/vent lengths at metamorphosis. The duration of metamorphosis showed a potentially adaptive plastic response to the presence of predator cues: metamorphosis was longest in the no-predator treatment group, reduced in the predator treatment group, and even further reduced for animals exposed to predator cues only during metamorphosis. Overall, we found a mix of potentially adaptive and costly plastic responses in spotted salamanders.

Visualizing the Simulation of 3-D Underwater Sensor Networks

The majority of sensor network research deals with land-based networks, which are essentially two-dimensional, and thus the majority of simulation and animation tools also only handle such networks. Underwater sensor networks on the other hand, are essentially 3D networks because the depth at which a sensor node is located needs to be considered as well. Due to that additional dimension, specialized tools need to be used when conducting simulations for experimentation. The School of Engineering’s Underwater Sensor Network (UWSN) lab is conducting research on underwater sensor networks and requires simulation tools for 3D networks. The lab has extended NS-2, a widely used network simulator, so that it can simulate three-dimensional networks. However, NAM, a widely used network animator, currently only supports two-dimensional networks and no extensions have been implemented to give it three-dimensional capabilities. In this project, we develop a network visualization tool that functions similarly to NAM but is able to render network environments in full 3-D. It is able to take as input a NS-2 trace file (the same file taken as input by NAM), create the environment, position the sensor nodes, and animate the events of the simulation. Further, the visualization tool is easy to use, especially friendly to NAM users, as it is designed to follow the interfaces and functions similar to NAM. So far, the development has fulfilled the basic functionality. Future work includes fully functional capabilities for visualization and much improved user interfaces.

Fort Richardson Ordnance Detonations and the Harbor Porpoise: A Case Study in Marine Mammal Bioacoustics

Hearing is extremely important for cetaceans because it is their “principal sense” (Weilgart, 2007) thus the harbor porpoise and other marine animals are highly dependent on sound for survival. This is why we should care about the impact of noise on animals like the harbor porpoise. Since sound travels so well in water, an explosion, sonar, boat noise, etc. can affect a very large area and thus many different species of marine mammals. Although military actions such as low frequency sonar have made recent news, noise has been affecting cetaceans, especially beaked whales, since at least 1991 (Weilgart, 2007). This study is an investigation of the possible impacts of artillery detonated on land on harbor porpoise hearing and covers some of the history of Fort Richardson, the legal and historical aspects and history of this type of concern, the science and physics of sound, marine mammal hearing and general biology of the harbor porpoise. Data were collected at the Fort Richardson Army base during June of 2007 by researchers from the University of Connecticut and the University of Rhode Island and will be used to determine the possible impacts that these detonations could have on the harbor porpoise.

DEVELOPMENT AND IMPLEMENTATION OF A REMOTE AUDIT TOOL FOR HIGH DOSE RATE (HDR) 192IR BRACHYTHERAPY USING OPTICALLY STIMULATED LUMINESCENCE DOSIMETRY

This work aimed to create a mailable and OSLD-based phantom with accuracy suitable for RPC audits of HDR brachytherapy sources at institutions participating in NCI-funded cooperative clinical trials. An 8 × 8 × 10 cm3 prototype with two slots capable of holding nanoDot Al2O3:C OSL dosimeters (Landauer, Glenwood, IL) was designed and built. The phantom has a single channel capable of accepting all 192Ir HDR brachytherapy sources in current clinical use in the United States. Irradiations were performed with an 192Ir HDR source to determine correction factors for linearity with dose, dose rate, and the combined effect of irradiation energy and phantom construction. The uncertainties introduced by source positioning in the phantom and timer resolution limitations were also investigated. It was found that the linearity correction factor was where dose is in cGy, which differed from that determined by the RPC for the same batch of dosimeters under 60Co irradiation. There was no significant dose rate effect. Separate energy+block correction factors were determined for both models of 192Ir sources currently in clinical use and these vendor-specific correction factors differed by almost 2.6%. For Nucletron sources, this correction factor was 1.026±0.004 (99% Confidence Interval) and for Varian sources it was 1.000±0.007 (99% CI). Reasonable deviations in source positioning within the phantom and the limited resolution of the source timer had insignificant effects on the ability to measure dose. Overall measurement uncertainty of the system was estimated to be ±2.5% for both Nucletron and Varian source audits (95% CI). This uncertainty was sufficient to establish a ±5% acceptance criterion for source strength audits under a formal RPC audit program. Trial audits of eight participating institutions resulted in an average RPC-to-institution dose ratio of 1.000 with a standard deviation of 0.011.

Development and Implementation of the Use of Optically Stimulated Luminescent Detectors in the Radiological Physics Center Anthropomorphic Quality Assurance Phantoms

The Radiological Physics Center (RPC) uses both on-site and remote reviews to credential institutions for participation in clinical trials. Anthropomorphic quality assurance (QA) phantoms are one tool the RPC uses to remotely audit institutions, which include thermoluminescent dosimeters (TLDs) and radiochromic film. The RPC desires to switch from TLD as the absolute dosimeter in the phantoms, to optically stimulated luminescent dosimeters (OSLDs), but a problem lies in the angular dependence exhibited by the OSLD. The purpose of this study was to characterize the angular dependence of OSLD and establish a correction factor if necessary, to provide accurate dosimetric measurements as a replacement for TLD in the QA phantoms. A 10 cm diameter high-impact polystyrene spherical phantom was designed and constructed to hold an OSLD to study the angular response of the dosimeter under the simplest of circumstances for both coplanar and non-coplanar treatment deliveries. OSLD were irradiated in the spherical phantom, and the responses of the dosimeter from edge-on angles were normalized to the response when irradiated with the beam incident normally on the surface of the dosimeter. The average normalized response was used to establish an angular correction factor for 6 MV and 18 coplanar treatments, and for 6 MV non-coplanar treatments specific to CyberKnife. The RPC pelvic phantom dosimetry insert was modified to hold OSLD, in addition to the TLD, adjacent to the planes of film. Treatment plans of increasing angular beam delivery were developed, three in Pinnacle v9.0 (4-field box, IMRT, and VMAT) and one in Accuray’s MultiPlan v3.5.3 (CyberKnife). The plans were delivered to the pelvic phantom containing both TLD and OSLD in the target volume. The pelvic phantom was also sent to two institutions to be irradiated as trials, one delivering IMRT, and the other a CyberKnife treatment. For the IMRT deliveries and the two institution trials, the phantom also included film in the sagittal and coronal planes. The doses measured from the TLD and OSLD were calculated for each irradiation, and the angular correction factors established from the spherical phantom irradiations were applied to the OSLD dose. The ratio of the TLD dose to the angular corrected OSLD dose was calculated for each irradiation. The corrected OSLD dose was found to be within 1% of the TLD measured dose for all irradiations, with the exception of the in-house CyberKnife deliveries. The films were normalized to both TLD measured dose and the corrected OSLD dose. Dose profiles were obtained and gamma analysis was performed using a 7%/4 mm criteria, to compare the ability of the OSLD, when corrected for the angular dependence, to provide equivalent results to TLD. The results of this study indicate that the OSLD can effectively be used as a replacement for TLD in the RPC’s anthropomorphic QA phantoms for coplanar treatment deliveries when a correction is applied for the dosimeter’s angular dependence.

Evaluation of Polymer Gel Dosimeters for Measurements of Dose and LET in Proton Beams

This project assessed the effectiveness of polymer gel dosimeters as tools for measuring the dose deposited by and LET of a proton beam. A total of three BANG® dosimeter formulations were evaluated: BANG®-3-Pro-2 BANGkits™ for dose measurement and two BANG®-3 variants, the LET-Baseline and LET-Meter dosimeters, for LET measurement. All dosimeters were read out using an OCT scanner. The basic characteristics of the BANGkits™ were assessed in a series of photon and electron irradiations. The dose-response relationship was found to be sigmoidal with a threshold for response of approximately 15 cGy. The active region of the dosimeter, the volume in which dosimeter response is not inhibited by oxygen, was found to make up roughly one fourth of the total dosimeter volume. Delivering a dose across multiple fractions was found to yield a greater response than delivering the same dose in a single irradiation. The dosimeter was found to accurately measure a dose distribution produced by overlapping photon fields, yielding gamma pass rates of 95.4% and 93.1% from two planar gamma analyses. Proton irradiations were performed for measurements of proton dose and LET. Initial irradiations performed through the side of a dosimeter led to OCT artifacts. Gamma pass rates of 85.7% and 89.9% were observed in two planar gamma analyses. In irradiations performed through the base of a dosimeter, gel response was found to increase with height in the dosimeter, even in areas of constant dose. After a correction was applied, gamma pass rates of 94.6% and 99.3% were observed in two planar gamma analyses. Absolute dose measurements were substantially higher (33%-100%) than the delivered doses for proton irradiations. Issues encountered while calibrating the LET-Meter gel restricted analysis of the LET measurement data to the SOBP of a proton beam. LET-Meter overresponse was found to increase linearly with track-average LET across the LET range that could be investigated (1.5 keV/micron – 3.5 keV/micron).

Documentación en Arqueología. Aplicaciones del Núcleo Español de Metadatos

RESUMEN Las aplicaciones de los Sistemas de Información Geográfica (SIG) a la Arqueología, u otra disciplina humanística no son una novedad. La evolución de los mismos hacia sistemas distribuidos e interoperables, y estructuras donde las políticas de uso, compartido y coordinado de los datos sí lo son, estando todos estos aspectos contemplados en la Infraestructura de Datos Espaciales. INSPIRE es el máximo exponente europeo en cuestiones de iniciativa y marco legal en estos aspectos. La metodología arqueológica recopila y genera gran cantidad de datos, y entre los atributos o características intrínsecas están la posición y el tiempo, aspectos que tradicionalmente explotan los SIG. Los datos se catalogan, organizan, mantienen, comparten y publican, y los potenciales consumidores comienzan a tenerlos disponibles. Toda esta información almacenada de forma tradicional en fichas y posteriormente en bases de datos relacionadas alfanuméricas pueden ser considerados «metadatos» en muchos casos por contener información útil para más usuarios en los procesos de descubrimiento, y explotación de los datos. Además estos datos también suelen ir acompañados de información sobre ellos mismos, que describe su especificaciones, calidad, etc. Cotidianamente usamos los metadatos: ficha bibliográfica del libro o especificaciones de un ordenador. Pudiéndose definir como: «información descriptiva sobre el contexto, calidad, condición y características de un recurso, dato u objeto que tiene la finalidad de facilitar su recuperación, identificación,evaluación, preservación y/o interoperabilidad». En España existe una iniciativa para estandarizar la descripción de los metadatos de los conjuntos de datos geoespaciales: Núcleo Español de Metadatos (NEM), los mismos contienen elementos para la descripción de las particularidades de los datos geográficos, que incluye todos los registros obligatorios de la Norma ISO19115 y del estudio de metadatos Dublin Core, tradicionalmente usado en contextos de Biblioteconomía. Conscientes de la necesidad de los metadatos, para optimizar la búsqueda y recuperación de los datos, se pretende formalizar la documentación de los datos arqueológicos a partir de la utilización del NEM, consiguiendo así la interoperabilidad de la información arqueológica. SUMMARY The application of Geographical Information Systems (GIS) to Archaeology and other social sciences is not new. Their evolution towards inter-operating, distributed systems, and structures in which policies for shared and coordinated data use are, and all these aspects are included in the Spatial Data Infrastructure (SDI). INSPIRE is the main European exponent in matters related to initiative and legal frame. Archaeological methodology gathers and creates a great amount of data, and position and time, aspects traditionally exploited by GIS, are among the attributes or intrinsic characteristics. Data are catalogued, organised, maintained, shared and published, and potential consumers begin to have them at their disposal. All this information, traditionally stored as cards and later in relational alphanumeric databases may be considered «metadata» in many cases, as they contain information that is useful for more users in the processes of discovery and exploitation of data. Moreover, this data are often accompanied by information about themselves, describing its especifications, quality, etc. We use metadata very often: in a book’s bibliographical card, or in the description of the characteristics of a computer. They may be defined as «descriptive information regarding the context, quality, condition and characteristics of a resource, data or object with the purpose of facilitating is recuperation, identification, evaluation, preservation and / interoperability.» There is an initiative in Spain to standardise the description of metadata in sets of geo-spatial data: the Núcleo Español de Metadatos (Spanish Metadata Nucleus), which contains elements for the description of the particular characteristics of geographical data, includes all the obligatory registers from the ISO Norm 19115 and from the metadata study Dublin Core, traditionally used in library management. Being aware of the need of metadata, to optimise the search and retrieval of data, the objective is to formalise the documentation of archaeological data from the Núcleo Español de Metadatos (Spanish Metadata Nucleus), thus obtaining the interoperability of the archaeological information.

Evaluación de competencias en programas de formación en el sector rural : el caso de la maestría tecnológica para prestadores de servicios profesionales (PSP) en México

El objetivo de la presente investigación doctoral es proponer una metodología para evaluar las competencias en programas de formación en el sector rural mexicano. Para ello hemos realizado una exhausta revisión documental a nivel internacional sobre el concepto de competencia, sus orígenes y su evolución, para poder diseñar la metodología de su evaluación, así como el identificar los diferentes enfoques, herramientas y técnicas utilizadas actualmente para la evaluación de las competencias. Una vez comprendido el concepto de competencia, haber observado que existen saberes implícitos en ella, además de haber identificado las competencias necesarias por parte de los actores sociales presentes en el medio rural mexicano para el logro de un desarrollo rural integral dentro de sus territorios, y haberlos integrado en el diseño de la metodología, hemos realizado una propuesta metodológica considerando los instrumentos disponibles en México y enmarcados en la normativa legal vigente, que pudieran aportar evidencias de desempeño de un sujeto. Además como parte de la metodología se ha diseñado y validado un cuestionario psicométrico para poder evaluar las competencias personales de los sujetos presentes en el medio rural mexicano. La aplicación empírica de la metodología propuesta fue realizada a un estudio de caso en México, particularmente a Prestadores de Servicios Profesionales (PSP) del medio rural, estudiantes de una maestría tecnológica diseñada bajo un enfoque de competencias por el Colegio de Postgraduados, Institución de enseñanza, investigación y servicio en Ciencias Agrícolas. Los resultados evidencian que la propuesta metodológica es significativa para poder evaluar las competencias en el sector rural mexicano. Abstract The objective of this PhD thesis is to propose a methodology to assess competences in training programs in rural Mexico. We therefore performed an exhausted international literature review on the concept of competence, its origins and evolution, in order to design their evaluation methodology and also identified the different approaches, tools and techniques currently used for the assessment of competences. Once we understand the concept of competence, have noticed that there are implicit knowledge in it, and having identified the competences needed by social actors in rural Mexico, for the achievement of a integrated rural development within their territories, and integrated them into the design of the methodology, we have made a methodology considering the tools available in Mexico and framed in the current legislation, which could provide evidence of performance of a subject. Also as part of the methodology we designed and validated a psychometric questionnaire to assess behavioral competences of the individuals present in rural Mexico. The empirical application of the proposed methodology was performed at a case study in Mexico, particularly to providers of farming professionals services (PSP), students from a technological master designed under a competence approach by the Colegio de Postgraduados, an Institution of teaching, research and service in Agricultural Sciences. The results show that the proposed methodology is meaningful to assess competences in rural Mexico.

Impact of Spatial Soil and Climate Input Data Aggregation on Regional Yield Simulations

This work was financially supported by the German Federal Ministry of Food and Agriculture (BMEL) through the Federal Office for Agriculture and Food (BLE), (2851ERA01J). FT and RPR were supported by FACCE MACSUR (3200009600) through the Finnish Ministry of Agriculture and Forestry (MMM). EC, HE and EL were supported by The Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (220-2007-1218) and by the strategic funding ‘Soil-Water-Landscape’ from the faculty of Natural Resources and Agricultural Sciences (Swedish University of Agricultural Sciences) and thank professor P-E Jansson (Royal Institute of Technology, Stockholm) for support. JC, HR and DW thank the INRA ACCAF metaprogramm for funding and Eric Casellas from UR MIAT INRA for support. CB was funded by the Helmholtz project “REKLIM—Regional Climate Change”. CK was funded by the HGF Alliance “Remote Sensing and Earth System Dynamics” (EDA). FH was funded by the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG) under the Grant FOR1695. FE and SS acknowledge support by the German Science Foundation (project EW 119/5-1). HH, GZ, SS, TG and FE thank Andreas Enders and Gunther Krauss (INRES, University of Bonn) for support. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

Sistema migratório Brasil-Portugal: hierarquias geográficas e dinâmicas dos fluxos e contrafluxos populacionais no limiar do século XXI

As migrações constituem um dos pilares da relação entre Brasil e Portugal. Com esta premissa este estudo tem por objetivo compreender a formação, a sustentação no tempo e a configuração atual do sistema migratório luso-brasileiro. Partindo da Geografia da População, dialoga-se tanto com os demais campos da própria ciência geográfica, especialmente a Geografia Política e a Geografia Econômica, como com as demais ciências humanas e sociais, dentre outras a Sociologia e a Antropologia. Adota- se uma periodização que busca articular as migrações e as imaginações geográficas produzidas e produtoras das ordens geopolíticas. Esta perspectiva diacrônica tem como ponto de partida a formação do estado territorial português e, posteriormente, do estado territorial brasileiro. Enfatiza-se, em especial, como homens e mulheres imigrantes brasileiros e portugueses participam das transformações recentes de Portugal e do Brasil, respectivamente. Desde o final da década de 2000 há uma situação em que fluxos e contrafluxos migratórios praticamente se equivalem. Dados quantitativos e qualitativos foram utilizados para demonstrar que portugueses no Brasil e brasileiros em Portugal imigrados a partir de 2000 possuem perfis diferentes quanto à idade, sexo, nível de instrução e inserção no mercado laboral. A análise das semelhanças e divergências entre estes grupos de imigrantes levou à consideração de que enfrentam barreiras e desafios distintos, mas têm em comum sua contribuição para ressignificação de uma relação pretérita e assimétrica, marcada pelo compartilhar de uma população luso-brasileira.