High catalytic activity of Au-PEDOT nanoflowers toward electrooxidation of glucose

Electrochemically deposited porous film of poly(3,4-ethylenedioxythiophene) (PEDOT) on carbon paper current collector is used as the substrate for electrochemical deposition of Au. PEDOT facilitates the formation of Au nanoflowers with an enhanced electrochemical active surface area, when compared with sub-micron size Au particles deposited on bare carbon paper electrode. Owing to enhanced surface area of Au nanoflowers, the Au-PEDOT/C electrode shows greater activity than Au/C electrode toward electrooxidation of glucose in 0.5 M NaOH electrolyte. Cyclic voltammetry studies show that the peak current density increases with increase in concentrations of glucose and NaOH in the electrolyte. H-1-NMR spectroscopy data indicates that sodium formate and gluconate are the primary products of electrooxidation of glucose on Au-PEDOT/C electrode. Repetitive cyclic voltametry and amperometry studies suggest that the electrochemical stability of Au-PEDOT/C electrode is higher than that of Au/C electrode. Thus, electrochemically deposited nanostructured Au on PEDOT/C is an efficient catalyst for direct glucose oxidation in alkaline media. (C) 2013 The Electrochemical Society. All rights reserved.

Laboratory Studies on Stabilization of an Expansive Soil by Lime Precipitation Technique

Lime stabilization prevails to be the most widely adopted in situ stabilization method for controlling the swell-shrink potentials of expansive soils despite construction difficulties and its ineffectiveness in certain conditions. In addition to the in situ stabilization methods presently practiced, it is theoretically possible to facilitate in situ precipitation of lime in soil by successive permeation of calcium chloride (CaCl2 ) and sodium hydroxide (NaOH) solutions into the expansive soil. In this laboratory investigation, an attempt is made to study the precipitation of lime in soil by successive mixing of CaCl2 and NaOH solutions with the expansive soil in two different sequences.Experimental results indicated that in situ precipitation of lime in soil by sequential mixing of CaCl2 and NaOH solutions with expansive soil developed strong lime-modification and soil-lime pozzolanic reactions. The lime-modification reactions together with the poorly de- veloped cementation products controlled the swelling potential, reduced the plasticity index, and increased the unconfined compressive strength of the expansive clay cured for 24 h. Comparatively, both lime-modification reactions and well-developed crystalline cementation products (formed by lime-soil pozzolanic reactions) contributed to the marked increase in the unconfined compressive strength of the ex-pansive soil that was cured for 7–21 days. Results also show that the sequential mixing of expansive soil with CaCl2 solution followed by NaOH solution is more effective than mixing expansive soil with NaOH solution followed by CaCl2 solution. DOI: 10.1061/(ASCE)MT .1943-5533.0000483. © 2012 American Society of Civil Engineers.

Direct regulation of topoisomerase activity by a nucleoid-associated protein

The topological homeostasis of bacterial chromosomes is maintained by the balance between compaction and the topological organization of genomes. Two classes of proteins play major roles in chromosome organization: the nucleoid-associated proteins (NAPs) and topoisomerases. The NAPs bind DNA to compact the chromosome, whereas topoisomerases catalytically remove or introduce supercoils into the genome. We demonstrate that HU, a major NAP of Mycobacterium tuberculosis specifically stimulates the DNA relaxation ability of mycobacterial topoisomerase I (TopoI) at lower concentrations but interferes at higher concentrations. A direct physical interaction between M. tuberculosis HU (MtHU) and TopoI is necessary for enhancing enzyme activity both in vitro and in vivo. The interaction is between the amino terminal domain of MtHU and the carboxyl terminal domain of TopoI. Binding of MtHU did not affect the two catalytic trans-esterification steps but enhanced the DNA strand passage, requisite for the completion of DNA relaxation, a new mechanism for the regulation of topoisomerase activity. An interaction-deficient mutant of MtHU was compromised in enhancing the strand passage activity. The species-specific physical and functional cooperation between MtHU and TopoI may be the key to achieve the DNA relaxation levels needed to maintain the optimal superhelical density of mycobacterial genomes.

Retrieval and Multi-scale Validation of Soil Moisture from Multi-temporal SAR Data in a Semi-Arid Tropical Region

The current study presents an algorithm to retrieve surface Soil Moisture (SM) from multi-temporal Synthetic Aperture Radar (SAR) data. The developed algorithm is based on the Cumulative Density Function (CDF) transformation of multi-temporal RADARSAT-2 backscatter coefficient (BC) to obtain relative SM values, and then converts relative SM values into absolute SM values using soil information. The algorithm is tested in a semi-arid tropical region in South India using 30 satellite images of RADARSAT-2, SMOS L2 SM products, and 1262 SM field measurements in 50 plots spanning over 4 years. The validation with the field data showed the ability of the developed algorithm to retrieve SM with RMSE ranging from 0.02 to 0.06 m(3)/m(3) for the majority of plots. Comparison with the SMOS SM showed a good temporal behaviour with RMSE of approximately 0.05 m(3)/m(3) and a correlation coefficient of approximately 0.9. The developed model is compared and found to be better than the change detection and delta index model. The approach does not require calibration of any parameter to obtain relative SM and hence can easily be extended to any region having time series of SAR data available.

Influence of soil pedological properties on termite mound stability

This study investigated the influence of soil properties on the density and shape of epigeous fungus-growing termite nests in a dry deciduous forest in Karnataka, India. In this environment, Odontotermes obesus produces cathedral shaped mounds. Their density, shape (height and volume) and soil physicochemical properties were analyzed in ferralsol and vertisol environments. No significant difference was observed in O. obesus mound density (n = 2.7 mound ha(-1) on average in the vertisol and ferralsol areas). This study also showed that O. obesus has a limited effect on soil physical properties. No differences in soil particle size, pH, or the C:N ratio and base saturation were measured whereas the C and N contents were reduced and CEC was higher in termite nest soils in both environments. Clay mineralogical composition was also measured, and showed the presence of higher amounts of smectite clays in termite nest soils, which thus explained the increasing CEC despite the reduced C and N content. However, the main difference was the shape of the termite mounds. The degradation of the nests created a hillock of eroded soil at the base of termite mounds in the vertisol while only a thin layer of eroded soil was observed in the ferralsol. The increased degradation of termite mounds in the vertisol is explained by the presence of smectites (2:1 swelling clays), which confer macroscopic swelling and shrinking characteristics to the soil. Soil shrinkage during the dry season leads to the formation of deep cracks in the termite mounds that allow rain to rapidly penetrate inside the mound wall and then breakdown unstable aggregates. In conclusion, it appears that despite a similar abundance, termite mound properties depend to a large extent on the soil properties of their environments. (C) 2015 Elsevier B.V. All rights reserved.

A low-power, low-cost soil-moisture sensor using dual-probe heat-pulse technique

This paper presents the development and testing of an integrated low-power and low-cost dual-probe heat-pulse (DPHP) soil-moisture sensor in view of the electrical power consumed and affordability in developing countries. A DPHP sensor has two probes: a heater and a temperature sensor probe spaced 3 mm apart from the heater probe. Supply voltage of 3.3V is given to the heater-coil having resistance of 33 Omega power consumption of 330 mW, which is among the lowest in this category of sensors. The heater probe is 40 mm long with 2 mm diameter and hence is stiff enough to be inserted into the soil. The parametric finite element simulation study was performed to ensure that the maximum temperature rise is between 1 degrees C and 5 degrees C for wet and dry soils, respectively. The discrepancy between the simulation and experiment is less than 3.2%. The sensor was validated with white clay and tested with red soil samples to detect volumetric water-content ranging from 0% to 30%. The sensor element is integrated with low-power electronics for amplifying the output from thermocouple sensor and TelosB mote for wireless communication. A 3.7V lithium ion battery with capacity of 1150 mAh is used to power the system. The battery is charged by a 6V and 300 mA solar cell array. Readings were taken in 30 min intervals. The life-time of DPHP sensor node is around 3.6 days. The sensor, encased in 30 mm x 20 mm x 10 mm sized box, and integrated with electronics was tested independently in two separate laboratories for validating as well as investigating the dependence of the measurement of soil-moisture on the density of the soil. The difference in the readings while repeating the experiments was found out to be less than 0.01%. Furthermore, the effect of ambient temperature on the measurement of soil-moisture is studied experimentally and computationally. (C) 2015 Elsevier B.V. All rights reserved.

Phase dependent photocatalytic activity of Ag loaded TiO2 films under sun light

Well-crystallized anatase and mixed (anatase-rutile) phase TiO2 thin films were deposited by DC magnetron sputtering technique at various DC powers in the range of 80-140 W. Pure anatase phase was observed in the TiO2 films deposited at low power of 80 W. Films deposited at 120 W were composed of both anatase and rutile phases. At higher power of 140 W, the films are rutile dominated and the rutile percentage increased from 0 to 82% with increase of DC power. The same results of phase change were confirmed by Raman studies. The surface morphology of the TiO2 films showed that the density of the films increased with increase of sputter power. The optical band gap of the films varied from 3.35 to 3.14 eV with increase of DC power. The photocatalytic activity of the TiO2 films increased with increasing DC power up to 120 W and after that it decreases. We found that the TiO2 films deposited at 120 W with 48% of rutile phase, exhibited high photocatalytic activity (43% of degradation) under UV light compared with other TiO2 films. After loading the optimized Ag nanoparticles on the mixed phase TiO2 films, the photocatalytic activity shifted from UV to visible region with enhancement of photocatalytic activity (55% of degradation). (C) 2015 Elsevier B.V. All rights reserved.

Phase dependent photocatalytic activity of Ag loaded TiO2 films under sun light

Well-crystallized anatase and mixed (anatase-rutile) phase TiO2 thin films were deposited by DC magnetron sputtering technique at various DC powers in the range of 80-140 W. Pure anatase phase was observed in the TiO2 films deposited at low power of 80 W. Films deposited at 120 W were composed of both anatase and rutile phases. At higher power of 140 W, the films are rutile dominated and the rutile percentage increased from 0 to 82% with increase of DC power. The same results of phase change were confirmed by Raman studies. The surface morphology of the TiO2 films showed that the density of the films increased with increase of sputter power. The optical band gap of the films varied from 3.35 to 3.14 eV with increase of DC power. The photocatalytic activity of the TiO2 films increased with increasing DC power up to 120 W and after that it decreases. We found that the TiO2 films deposited at 120 W with 48% of rutile phase, exhibited high photocatalytic activity (43% of degradation) under UV light compared with other TiO2 films. After loading the optimized Ag nanoparticles on the mixed phase TiO2 films, the photocatalytic activity shifted from UV to visible region with enhancement of photocatalytic activity (55% of degradation). (C) 2015 Elsevier B.V. All rights reserved.

Influences of slope gradient on soil erosion

The main factors influencing soil erosion include the net rain excess, the water depth, the velocity, the shear stress of overland flows, and the erosion-resisting capacity of soil. The laws of these factors varying with the slope gradient were investigated by using the kinematic wave theory. Furthermore, the critical slope gradient of erosion was driven. The analysis shows that the critical slope gradient of soil erosion is dependent on grain size, soil bulk density, surface roughness, runoff length, net rain excess, and the friction coefficient of soil, etc. The critical slope gradient has been estimated theoretically with its range between 41.5 degrees similar to 50 degrees.

Impact of fertlizers and pesticides on soil and water quality

[ES]En la presente tesis se ha estudiado el impacto de diferentes fertilizantes y pesticidas utilizados en la Zona Vulnerable de Vitoria-Gasteiz en la calidad del suelo y las aguas de dicha zona. Se ha podido constatar que hoy en día siguen lixiviándose cantidades significativas de nitratos y pesticidas (e.g., etofumesato y difenoconazol) a las aguas de la Zona Vulnerable, durante el cultivo de remolacha azucarera (Beta vulgaris L.), muy característico de la zona de estudio. Se comprobó que el alto contenido en nitratos de las aguas subterráneas en la Zona Vulnerable es mitigado, al menos en parte, por la acción de la actividad microbiana desnitrificante que alberga la zona riparia del humedal de Salburua. Dicho proceso, sin embargo, supone la emisión a la atmósfera de importantes cantidades de gases de efecto invernadero (CO2 y N2O), y puede verse afectado negativamente por la presencia de pesticidas (e.g., deltametrina) en el medio.Por otra parte, hemos observado que diversos pesticidas (deltametrina, etofumesato, difenoconazol) aplicados en concentraciones similares a las dosis de aplicación en campo inducen cambios, de carácter limitado y transitorio, en las comunidades microbianas edáficas, siendo más significativos en el caso del fungicida difenoconazol. El efecto de los pesticidas fue más acusado a medida que aumentaba su concentración en el medio. Finalmente, encontramos que la aplicación de abonos orgánicos (avicompost), en lugar de los fertilizantes sintéticos tradicionales (NPK), además de mejorar la degradación de los pesticidas y disminuir el impacto de éstos sobre la calidad del suelo, podría ayudar a reducir las pérdidas de nitratos por lixiviación.

Increased physical activity is not enough to recover astrocytic population from dark-rearing. Synergy with multisensory enrichment is required

10 p.

Synthesis and biological activity of anticoagulant heparan sulfate glycopolymers

Heparin has been used as an anticoagulant drug for more than 70 years. The global distribution of contaminated heparin in 2007, which resulted in adverse clinical effects and over 100 deaths, emphasizes the necessity for safer alternatives to animal-sourced heparin. The structural complexity and heterogeneity of animal-sourced heparin not only impedes safe access to these biologically active molecules, but also hinders investigations on the significance of structural constituents at a molecular level. Efficient methods for preparing new synthetic heparins with targeted biological activity are necessary not only to ensure clinical safety, but to optimize derivative design to minimize potential side effects. Low molecular weight heparins have become a reliable alternative to heparin, due to their predictable dosages, long half-lives, and reduced side effects. However, heparin oligosaccharide synthesis is a challenging endeavor due to the necessity for complex protecting group manipulation and stereoselective glycosidic linkage chemistry, which often result in lengthy synthetic routes and low yields. Recently, chemoenzymatic syntheses have produced targeted ultralow molecular weight heparins with high-efficiency, but continue to be restricted by the substrate specificities of enzymes.

To address the need for access to homogeneous, complex glycosaminoglycan structures, we have synthesized novel heparan sulfate glycopolymers with well-defined carbohydrate structures and tunable chain length through ring-opening metathesis polymerization chemistry. These polymers recapitulate the key features of anticoagulant heparan sulfate by displaying the sulfation pattern responsible for heparin’s anticoagulant activity. The use of polymerization chemistry greatly simplifies the synthesis of complex glycosaminoglycan structures, providing a facile method to generate homogeneous macromolecules with tunable biological and chemical properties. Through the use of in vitro chromogenic substrate assays and ex vivo clotting assays, we found that the HS glycopolymers exhibited anticoagulant activity in a sulfation pattern and length-dependent manner. Compared to heparin standards, our short polymers did not display any activity. However, our longer polymers were able to incorporate in vitro and ex vivo characteristics of both low-molecular-weight heparin derivatives and heparin, displaying hybrid anticoagulant properties. These studies emphasize the significance of sulfation pattern specificity in specific carbohydrate-protein interactions, and demonstrate the effectiveness of multivalent molecules in recapitulating the activity of natural polysaccharides.

Synthesis, Oxidation and Photophysics of Perfluoroborated Tetrakis(pyrophosphito)diplatinate (II) and Density Functional Theory (DFT) Study of Electrochemical CO2 Reduction by Mn Catalysts

In the first part of this thesis (Chapters I and II), the synthesis, characterization, reactivity and photophysics of per(difluoroborated) tetrakis(pyrophosphito)diplatinate(II) (Pt(POPBF₂)) are discussed. Pt(POP-BF₂) was obtained by reaction of [Pt₂(POP)₄]^4- with neat boron trifluoride diethyl etherate (BF₃·Et₂O). While Pt(POP-BF₂) and [Pt₂(POP)₄]^4- have similar structures and absorption spectra, they differ in significant ways. Firstly, as discussed in Chapter I, the former is less susceptible to oxidation, as evidenced by the reversibility of its oxidation by I2. Secondly, while the first excited triplet states (T₁) of both Pt(POP-BF₂) and [Pt₂(POP)₄]^4- exhibit long lifetimes (ca. 0.01 ms at room temperature) and substantial zero-field splitting (40 cm^-1), Pt(POP-BF₂) also has a remarkably long-lived (1.6 ns at room temperature) singlet excited state (S₁), indicating slow intersystem crossing (ISC). Fluorescence lifetime and quantum yield (QY) of Pt(POP-BF₂) were measured over a range of temperatures, providing insight into the slow ISC process. The remarkable spectroscopic and photophysical properties of Pt(POP-BF₂), both in solution and as a microcrystalline powder, form the theme of Chapter II.

In the second part of the thesis (Chapters III and IV), the electrochemical reduction of CO₂ to CO by [(L)Mn(CO)₃]^- catalysts is investigated using density functional theory (DFT). As discussed in Chapter III, the turnover frequency (TOF)-limiting step is the dehydroxylation of [(bpy)Mn(CO)₃(CO₂H)]^0/- (bpy = bipyridine) by trifluoroethanol (TFEH) to form [(bpy)Mn(CO)₄]^+/0. Because the dehydroxylation of [(bpy)Mn(CO)₃(CO₂H)]^- is faster, maximum TOF (TOF_max) is achieved at potentials sufficient to completely reduce [(bpy)Mn(CO)₃(CO₂H)]⁰ to [(bpy)Mn(CO)₃(CO₂H)]^-. Substitution of bipyridine with bipyrimidine reduces the overpotential needed, but at the expense of TOF_max. In Chapter IV, the decoration of the bipyrimidine ligand with a pendant alcohol is discussed as a strategy to increase CO₂ reduction activity. Our calculations predict that the pendant alcohol acts in concert with an external TFEH molecule, the latter acidifying the former, resulting in a ~ 80,000-fold improvement in the rate of TOF-limiting dehydroxylation of [(L)Mn(CO)₃(CO₂H)]^-.

An interesting strategy for the co-upgrading of light olefins and alkanes into heavier alkanes is the subject of Appendix B. The proposed scheme involves dimerization of the light olefin, operating in tandem with transfer hydrogenation between the olefin dimer and the light alkane. The work presented therein involved a Ta olefin dimerization catalyst and a silica-supported Ir transfer hydrogenation catalyst. Olefin dimer was formed under reaction conditions; however, this did not undergo transfer hydrogenation with the light alkane. A significant challenge is that the Ta catalyst selectively produces highly branched dimers, which are unable to undergo transfer hydrogenation.

Avaliação de diferentes estratégias de biorremediação no tratamento de solo contaminado por diesel B5

No Brasil, a contaminação do solo por derramamentos de combustíveis representa um dos mais graves problemas ambientais e o impacto da introdução de novas misturas como diesel/biodiesel na matriz energética requer investigação quanto a tecnologias apropriadas de remediação. O presente estudo teve por objetivo avaliar diferentes estratégias de biorremediação no tratamento de solo contaminado experimentalmente com óleo diesel B5. Foram conduzidos três experimentos. No primeiro, quatro microcosmos em duplicata, contendo 500 g de solo e 5% (p/p) de óleo diesel B5, todos suplementados com oxigênio através de revolvimento manual e com ajuste de umidade, tiveram como tratamentos: bioestímulo com ajuste de pH (BE1); bioestímulo com ajuste de pH e nutrientes (BE2); bioaumento com ajuste de pH, nutrientes e adição de consórcio microbiano comercial KMA (BAM) e; controle abiótico, com ajuste de pH e solo esterilizado em autoclave (PA). Paralelamente, foi conduzido tratamento por bioaumento com ajuste de pH e nutrientes, suplementação de oxigênio e consórcio KMA, em solo contaminado apenas por diesel a 5% (BAD). A população microbiana foi monitorada através da contagem de UFC e os tratamentos, avaliados pela remoção de carbono orgânico e de hidrocarbonetos de petróleo (n-alcanos C10-C36). No segundo experimento, o metabolismo microbiano aeróbio foi avaliado através da produção de CO2 em respirômetros de Bartha (triplicatas), em solo contaminado com 5% (p/p) de óleo diesel B5, ajustado para pH e umidade, nas seguintes condições: solo com adição do consórcio KMA; solo com adição de cultura microbiana obtida a partir de outro solo proveniente de um posto de combustível com histórico de vazamento de tanques (RES) e; solo esterilizado por adição de azida de sódio a 0,3% (p/p). Como controle, solo sem contaminação, com sua população microbiana autóctone. No terceiro experimento, a capacidade da microbiota autóctone (EX), assim como do consórcio KMA e da cultura RES, em biodegradar óleo diesel B5, diesel e biodiesel de soja foi testada através do uso de indicadores de oxirredução DCPIP e TTC. Os experimentos em microcosmos indicam que houve uma complementaridade metabólica entre a população nativa e o consórcio comercial de microorganismos KMA, cuja presença promoveu um decaimento mais rápido de n-alcanos nas primeiras semanas do experimento. No entanto, após 63 dias de experimento, os tratamentos BAM, BAD e BE2 apresentaram, respectivamente, em média, 92,7%, 89,4% e 81,7% de remoção dos hidrocarbonetos n-alcanos C10-C36, sendo tais diferenças, sem significância estatística. Nos respirômetros, o bioaumento com cultura microbiana RES apresentou a maior produção de CO2 e a maior remoção de hidrocarbonetos (46,2%) após 29 dias. Tanto nos ensaios em microcosmos quanto nos respirométricos, não foi possível estimar a contribuição dos processos abióticos, tendo em vista evidências da existência de atividade microbiana no solo esterilizado térmica ou quimicamente. Os ensaios com os dois indicadores redox mostraram que apenas a microbiota nativa do solo em estudo e a cultura microbiana RES apresentaram potencial para degradar óleo diesel B5, biodiesel de soja ou diesel, quando colocadas em meio mineral contendo tais combustíveis como única fonte de carbono.

Uso do espaço por Hypselartemon contusulus (Férussac, 1827) (Gastropoda, Streptaxidae) da Trilha da Parnaioca, Ilha Grande, Rio de Janeiro, Brasil

O comportamento espacial dos indivíduos é um componente chave para se entender a dinâmica de população dos organismos e esclarecer o potencial de migração e dispersão das espécies. Vários fatores afetam a atividade de locomoção de moluscos terrestres, como temperatura, luz, umidade, época do ano, tamanho da concha, sexo, estratégia reprodutiva, idade, densidade de coespecíficos e disponibilidade de alimento. Um dos métodos usados para estudar deslocamento de gastrópodes terrestres é o de marcação-recaptura. Gastrópodes terrestres se prestam a este tipo de estudo por causa de (1) seu reduzido tamanho, (2) fácil manejo, (3) fácil captura e (4) pequenas distâncias de deslocamento e, consequentemente, reduzidas áreas de vida. Estes organismos servem como modelo para o estudo de ecologia espacial e dispersão. Estudos de população, investigando o uso do espaço, a distribuição espacial, a densidade populacional e a área de vida são escassos para moluscos terrestres e ainda mais raros em áreas naturais tropicais. Nosso objeto de estudo é Hypselartemon contusulus (Férussac, 1827), um molusco terrestre carnívoro, da família Streptaxidae, muito abundante na serrapilheira, em trechos planos de mata secundária na Trilha da Parnaioca, Ilha Grande, Rio de Janeiro. A espécie é endêmica para o estado do Rio de Janeiro. Seu tamanho é de até 7,2 mm de altura, apresentando 6 a 7 voltas. Neste trabalho estudamos as variáveis temperatura ambiente, temperatura do solo, umidade do ar, luminosidade, profundidade do folhiço, tamanho do animal, densidade de co-específicos e densidade de presas, relacionando estes dados ecológicos ao deslocamento observado em Hypselartemon contusulus. Uma das hipóteses de trabalho é que estas variáveis afetam seu deslocamento. O trabalho foi realizado na Ilha Grande, situada ao sul do Estado do Rio de Janeiro, no município de Angra dos Reis. Os animais foram capturados e marcados com um código individual pintado na concha com corretor ortográfico líquido e caneta nanquim. As distâncias de deslocamento, em cm, foram registradas medindo-se as distâncias entre marcadores subsequentes. Os resultados encontrados indicam que o método utilizado é eficaz para marcar individualmente Hypselartemon contusulus em estudos de médio prazo (até nove meses). Sugerimos o uso deste método de marcação para estudos com gastrópodes terrestres ameaçados de extinção, como algumas espécies das famílias Bulimulidae, Megalobulimidae, Streptaxidae e Strophocheilidae. Hypselartemon contusulus não mantém uma distância mínima de seus vizinhos, é ativo ao longo de todo o ano e ao longo do dia, demonstrando atividade de locomoção e predação. Não foram encontrados animais abrigados sob pedra ou madeira morta. Não foram observados locais de atividade em oposição a lugares de repouso/abrigo. Beckianum beckianum (Pfeiffer, 1846) foi a presa preferencial. A densidade populacional variou de 0,57 a 1,2 indivíduos/m2 entre as campanhas de coleta. A espécie desloca-se, em média, 26,57 17,07 cm/24h, na Trilha da Parnaioca, Ilha Grande. A área de vida de H. contusulus é pequena, sendo de, no máximo, 0,48 m2 em três dias e 3,64 m2 em 79 dias. O deslocamento da espécie variou ao longo do ano, mas esta variação não é afetada pelas variáveis ecológicas estudadas. Este é, portanto, um comportamento plástico em H. contusulus e, provavelmente, controlado por fatores endógenos.