Demonstration of a compact InGaAsP active crosspoint switch operating at 1.5 μm using novel reflective y-coupler components

An extremely compact active optoelectronic crosspoint switch, having overall dimensions of 400 μm×200 μm, is reported. The device provides unity facet-to-facet gain for both bar and cross state operation for TE or TM input signals.

BISTABLE PERFORMANCE OF CLOSELY COUPLED TWIN STRIPE LASERS.

Results are given for bistable effects in closely coupled twin stripe lasers. These devices use controlled adjustment of asymmetric transverse optical gain to obtain bistability. Various bistable effects have been observed. Initially the authors reported a large light/current hysteresis loop obtained as the drive current to the laser was raised and lowered. Information concerning the bistable mechanisms was then obtained by applying small current pulses into each stripe. It was thus found that bistability was involved with the switching from one stable laser waveguiding mechanism to another. More recently the experimental measurement system has been much improved. Through the use of computer control of motorised micromovements and computer controlled data management, time resolved near and far field, and charge carrier concentration distribution measurements have been more accurately carried out. The paper will outline briefly this system, and report on how it has helped to reveal new mechanisms of bistability in twin stripe lasers.

Calculations and predications of combustion oscillations

The combustion oscillations are the phenomena which we may meet in developing the clean, safe and efficient power and propulsion systems. This paper summarizes authors' systematic work on fuel spray combustion oscillations in the recent years. Combining CFD calculations and stability analysis, a new approach of predicting combustion stabilities was developed. With this approach, detailed flow information and unstable modes can be obtained by CFD and solving perturbation equations, respectively. The results provide the guidance on understanding combustion instability mechanisms and developing the control strategies.

158-microJ pulses from a single-transverse-mode, large-mode-area erbium-doped fiber amplifier.

We report the amplification of 10-100-pJ semiconductor diode pulses to an energy of 158 microJ and peak powers >100 kW in a multistage fiber amplifier chain based on a single-mode, large-mode-area erbium-doped amplifier design. To our knowledge these results represent the highest single-mode pulse energy extracted from any doped-fiber system.

Discovering transcriptional modules by Bayesian data integration.

MOTIVATION: We present a method for directly inferring transcriptional modules (TMs) by integrating gene expression and transcription factor binding (ChIP-chip) data. Our model extends a hierarchical Dirichlet process mixture model to allow data fusion on a gene-by-gene basis. This encodes the intuition that co-expression and co-regulation are not necessarily equivalent and hence we do not expect all genes to group similarly in both datasets. In particular, it allows us to identify the subset of genes that share the same structure of transcriptional modules in both datasets. RESULTS: We find that by working on a gene-by-gene basis, our model is able to extract clusters with greater functional coherence than existing methods. By combining gene expression and transcription factor binding (ChIP-chip) data in this way, we are better able to determine the groups of genes that are most likely to represent underlying TMs. AVAILABILITY: If interested in the code for the work presented in this article, please contact the authors. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

内蒙古锡林河流域主要植物种、功能群和群落水分利用效率的研究

近二十年来，碳同位素技术己被广泛应用于植物生态学，特别是植物“碳一水”关系的研究中。植物的碳同位素组成（δ13C值）是叶片组织合成过程中光合活动的整合，它反映了植物长期的水分利用效率。内蒙古锡林河流域位于我国温带典型草原的核心区域，水分是制约本区植物生产力和群落稳定性的限制因素。因此关于本区植物水分利用效率和水分利用状况的研究，对探讨植物对生境干旱化的适应与响应机制具有十分重要的理论和实践意义。本研究沿土壤水分梯度在锡林河流域选取了沼泽化草甸、盐化草甸、草甸草原、典型草原、退化草地和疏林沙地等8个代表性植物群落，研究主要植物种、功能群和群落的碳同位素组成及叶片含水量、脯氨酸含量等与植物抗旱性相关的生理指标的变化，从植物种、功能群和群落三个层次研究了不同水分条件下植物水分利用效率的变化及其对不同水分生境的响应与适应机制。 　　1）在所调查的8个植物群落中，C3植物占绝对优势;C3植物的δ13C值和水分利用效率越大，其在整个流域中的分布频度越高，生物量也越大;与生长在湿润生境中的植物相比，生长在较干旱生境中的植物能积累更高水平的脯氨酸。以上结果表明，锡林河流域的植物可能通过两种机制适应当地的干旱生境：一是通过调节气孔导度提高植物的水分利用效率;止是通过积累高水平的脯氨酸增强植株的渗透调节能力并维持相对稳定的水分含量。 　　2）依照生活型将锡林河流域主要植物种划分成6个植物功能群：乔木、灌木、半灌木、多年生禾草、多年生杂类草和一年生植物。在较湿润生境，多年生杂类草更加丰富并构成了群落地上生物量的绝大部分;而在较干旱生境下，多年生禾草在群落中起更重要的作用;随着土壤含水量下降，灌木和半灌木逐渐增多，且在退化草地和沙地中其相对生物量迅速增加;多年生禾草别3c值显著高于其它功能群;随着土壤水分可利用性降低，多年生禾草和杂类草的别3c值表现出增加的趋势，而灌木／半灌木则表现出相反的趋势。以上结果进一步证明了，在典型草原区以生活型为基础划分的植物功能群可以用来进行较大尺度植物一水分关系的研究。 　　3）依照植物的水分生态类群，将锡林河流域主要植物种划分为六个植物功能群：旱生植物、中旱生植物、旱中生植物、中生植物、湿中生植物和湿生植物。在较湿润生境中（沼泽化草甸和盐化草甸），湿中生和湿生植物成为优势种并构成地上生物量的主体;在干旱生境中（草甸草原、典型草原和退化草地），旱生和中早生植物占绝对优势并构成群落生物量的90％以上;随着不同水分生态类群所适应的生境从干旱到湿润逐渐转变，植物的δ13C值和水分利用效率显著降低;旱生植物叶片脯氨酸含耸最高，湿中生和湿生植物脯氨酸含量最低，不同水分生态类群脯氨酸含量与其δ13C值和地上生物星．显著正相关关系。 　　4）不同群落类型的平均δ13C值有显著不同，表现为：典型草原＞退化草地＞沙地＞退化恢复草地＞草甸草原之盐化草甸＞沼泽化草甸。C4植物的出现、不同物种δ13C值的差异和同一物种在不同生境下δ13C值的变化是影响群落平均δ13C值的主要因素，而这些因素与土壤水分状况和干扰历史（特别是放牧）密切相关。 　　此外，本文还研究了氮素添加对羊草和大针茅光合和水分利用效率的影响。土壤含氮量的增加可以显著提高羊草叶片光合能力和叭JE，而对大针茅的影响不大。作为锡林河流域两种优势植物，羊草和大针茅通过不同的生理机制来维持较高的WUE适应干旱生境：羊草为高光合、高蒸腾，而大针茅为低光合、低蒸腾。羊草较高的WUE是以降低氮利用效率 （NuE）为代价的;而大针茅在维持较高WUE的同时仍能维持较高的NUE，这一特征使大针茅可以广泛分布于更加干旱和贫瘩的地区。 　　以上研究结果，为深入开展典型草原生态系统植物与水分关系的研究提供了有价值的信息，进一步证实了稳定性碳同位素技术可以有效地指示不同群落类型中主要植物种长期水分利用效率。同时，通过对其它相关生理指标的测定，可以更好地探讨植物对水分限制的适应策略。我们的研究结果从植物种、功能群和群落三个层次进一步揭示了植物对干旱生境的适应机制，并初步阐明了人类干扰特别是过度放牧对草原群落建群种和优势种的生态替代或／和灌丛入侵的影响。这些研究对生物多样性保护、全球变化和区域可持续发展等热点问题的研究都具有重要的意义。在今后的研究中，结合其它稳定性同位素（如2H，18O和15N）技术，将有助于我们进一步深入研究蒙古高原植物对气候变化和过度放牧的适应与响应机制。 　　

158-μJ pulses from a single-transverse-mode, large-mode-area erbium-doped fiber amplifier

We report the amplification of 10-100-pJ semiconductor diode pulses to an energy of 158 μJ and peak powers >100 kW in a multistage fiber amplifier chain based on a single-mode, large-mode-area erbium-doped amplifier design. To our knowledge these results represent the highest single-mode pulse energy extracted from any doped-fiber system. © 1997 Optical Society of America.

EVIDENCE FOR TWO TELLURIUM SITES IN DILUTE LIQUID Te-Tl ALLOYS.

Recently, experimental evidence was presented which suggests that as the stoichiometric composition CuTe, NiTe, Tl//2Te and MnTe are approached from pure Te in the liquid state, substantial charge transfer takes place and Te exists in the form Te**y**31 ions with y close to 2. The system studied (Te-Tl) is one in which charge transfer localizes electrons on the tellurium and leads to semiconducting behavior at the stoichiometric composition Tl//2Te.

Erratum: "Zinc oxide nanostructures and high electron mobility nanocomposite thin film transistors" (IEEE Transactions on Electron Devices (2009))

In the above entitled paper (ibid., vol. 55, no. 11, pp. 3001-3011), two errors were noticed after the paper went to press. The errors are corrected here.

Mechanical constraint and loading on ferroelectric memory capacitors

The influence of mechanical constraint imposed by device geometry upon the switching response of a ferroelectric thin film memory capacitor is investigated. The memory capacitor was represented by two-dimensional ferroelectric islands of different aspect ratio, mechanically constrained by surrounding materials. Its ferroelectric non-linear behaviour was modeled by a crystal plasticity constitutive law and calculated using the finite element method. The switching response of the device, in terms of remnant charge storage, was determined as a function of geometry and constraint. The switching response under applied in-plane tensile stress and hydrostatic pressure was also studied experimentally. Our results showed that (1) the capacitor's aspect ratio could significantly affect the clamping behaviour and thus the remnant polarization, (2) it was possible to maximise the switching charge through the optimisation of the device geometry, and (3) it is possible to find a critical switching stress at zero electric field and a critical coercive field at zero residual stress. © 2009 Materials Research Society.