Uso do Blue Rayon para extração/concentração de compostos policíclicos em amostras ambientais

This is a review about the use of Blue rayon in the extraction and concentration of environmental contaminants in the aquatic environment. Blue rayon is an adsorbent composed of fibers covalently linked with copper phthalocyanine trisulphonate that has the ability to selectively adsorb polycyclic compounds. Blue rayon can be used in situ, in columns or in flasks. This method showed to be efficient in the extraction of important classes of environmental contaminants like the polycyclic aromatic hydrocarbons (PAHs), aromatic amines and phenylbenzotriazoles (PBTAs) and can be an important tool in monitoring studies for the evaluation of water quality.

Plasmid DNA damage induced by singlet molecular oxygen released from the naphthalene endoperoxide DHPNO2 and photoactivated methylene blue

To investigate oxidative lesions and strand breaks induction by singlet molecular oxygen (¹O2), supercoiled-DNA plasmid was treated with thermo-dissociated DHPNO2 and photoactivated-methylene blue. DNA lesions were detected by Fpg that cleaves DNA at certain oxidized bases, and T4-endoV, which cleaves DNA at cyclobutane pyrimidine dimers and apurinic/apyrimidinic (AP) sites. These cleavages form open relaxed-DNA structures, which are discriminated from supercoiled-DNA. DHPNO2 or photoactivated-MB treatments result in similar plasmid damage profile: low number of single-strand breaks or AP-sites and high frequency of Fpg-sensitive sites; confirming that base oxidation is the main product for both reactions and that ¹O2 might be the most likely intermediate that reacts with DNA.

Utilization of Sn/Nb2O5 composite for the removal of methylene blue

In this work, the oxidation of methylene blue textile dye in the presence of hydrogen peroxide, using niobium oxide impregnated with different proportions of tin (1, 5 and 10% in mass) as catalyst was studied. The materials were characterized by TPR, XPS, XRD and FTIR. The oxidation tests monitored by ESI-MS showed that the composite containing the higher amount of tin was the most efficient in the removal of the dye. The XRD, XPS, and TPR data presented evidence of the formation of the tin-niobium oxide composite containing Sn0 and supported SnO2.

Estimation of surface area and pore volume of activated carbons by methylene blue and iodine numbers

Data of methylene blue number and iodine number of activated carbons samples were calibrated against the respective surface area, micropore volume and total pore volume using multiple regression. The models obtained from the calibrations were used in predicting these physical properties of a test group of activated carbon samples produced from several raw materials. In all cases, the predicted values were in good agreement with the expected values. The method allows extracting more information from the methylene blue and iodine adsorption studies than normally obtained with this type of material.

Spectrophotometric determination of Sudan Blue II in environmental samples after dispersive liquid-liquid microextraction

A dispersive liquid-liquid microextraction procedure coupled to spectrophotometry is described for the determination of the trace levels of Sudan Blue II. Analytical parameters, such as pH, volume of extraction solvent (carbon tetrachloride), volume of dispersant (ethanol), volume of sample, and extraction time, were optimized. Matrix effects were also investigated. Preconcentration factor was found to be 200. Detection limit and relative standard deviation (RSD) were 0.55 µg L-1 and 3.9%, respectively. The procedure was successfully used for the determination of trace levels of Sudan Blue II in food, ink, antifreeze, and industrial waste-water samples.

CHEMICAL COMPOSITION VARIABILITY IN THE Uncaria tomentosa (cat’s claw) WILD POPULATION

Uncaria tomentosa (cat's claw) is a vine widely distributed throughout the South-American rainforest. Many studies investigating the chemical composition of cat's claw have focused on the pentacyclic (POA) and tetracyclic oxindole alkaloids (TOA), quinovic acid glycosides (QAG), and polyphenols (PPH). Nevertheless, it is still uncertain how environmental factors affect chemical groups. The aim of this work was to better understand the influence of environmental factors (geographic origin, altitude, and season) on cat's claw chemical composition. Stem bark, branches and leaf samples were extracted and analyzed by HPLC-PDA. The data obtained were explored by multivariate analysis (HCA and PCA). Higher amounts of oxindole alkaloids and PPH were found in leaves, followed by stem bark and branches. No clear relationship was verified among geographic origin or altitude and chemical composition, which remained unchanged regardless of season (dry or rainy). However, three oxindole alkaloid chemotypes were clearly recognized: chemotype I (POA with cis D/E ring junction); chemotype II (POA with trans D/E ring junction); and chemotype III (TOA). Thus, environmental factors appear to have only a minor influence on the chemical heterogeneity of the cat's claw wild population. Nevertheless, the occurrence of different chemotypes based on alkaloid profiles seems to be clear.

PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

Acacia mearnsii de Wild (black wattle) is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with mass spectrometry (GC/MS). Branches of black wattle were thermally degraded at controlled ambient and temperature conditions. Overall, a higher variety of compounds were obtained under atmospheric air pressure than under synthetic air pressure. Most of the tentatively identified compounds, such as carboxylic acids, phenols, aldehydes, and low molecular mass lignin fragments, such as guayacol, syringol, and eugenol, were products of lignin thermoconversion. Substituted aromatic compounds, such as vanillin, ethyl vanillin, and 2-methoxy-4-propeny-phenol, were also identified. At temperatures above 200 ºC, furan, 2-acetylfuran, methyl-2-furoate, and furfural, amongst others, were identified as polysaccharide derivatives from cellulose and hemicellulose depolymerization. This study evidences the need for adequate management of the condensable by-products of charcoal production, both for economic reasons and for controlling their potential environmental impact.

Methylene blue adsorption onto modified lignin from sugar cane bagasse

The adsorption kinetics and equilibrium of methylene blue (MB) onto reticulated formic lignin (RFL) from sugar cane bagasse was studied. The adsorption process is pH, temperature and ionic strength (µ) dependent and obeys the Langmuir model. Conditions for higher adsorption rate and capacity were determined. The faster adsorption (12 hours) and higher adsorption capacity (34.20 mg.g-1) were observed at pH = 5.8 (acetic acid-sodium acetate aqueous buffer), 50 ºC and 0.1 ionic strength. Under temperature (50 ºC) control and occasional mechanical stirring it took from 1 to 10 days to reach the equilibrium.

A simple method for the spectrophotometric determination of cephalosporins in pharmaceuticals using variamine blue

A simple spectrophotometric method for the determination of cefotaxime, ceftriaxone, cefadroxil and cephalexin with variamine blue is presented. The determination is based on the hydrolysis of β-lactam ring of cephalosporins with sodium hydroxide which subsequently reacts with iodate to liberate iodine in acidic medium. The liberated iodine oxidizes variamine blue to violet colored species of maximum absorption at 556 nm. The absorbance is measured within the pH range of 4.0-4.2. Beer's law is obeyed in the range of 0.5-5.8 µg mL-1, 0.2-7.0 µg mL-1, 0.2-5.0 µg mL-1 and 0.5-8.5 µg mL-1 for cefotaxime, ceftriaxone, cefadroxil and cephalexin respectively. The analytical parameters were optimized and the method is successfully applied for the determination of cefotaxime, ceftriaxone, cefadroxil and cephalexin in pharmaceuticals.

Photoelectrocatalytical degradation of basic blue 41 dye using nanoporous semiconductor of Ti/TiO2

O presente trabalho investiga a degradação fotoeletrocatalítica do corante Azul Básico 41 (AB 41) amplamente utilizado na tintura de fibras sintéticas, utilizando um semicondutor Ti/TiO2 como fotoanodo. 100% de degradação foi obtida após 60 min de tratamento de 8,33x10-5 mol L-1 do corante em 0,1 mol L−1 Na2SO4, pH 2 sob densidade de corrente de 0,40 mA cm−2 e irradiação UV. Ainda foi obtido 80% de remoção de carbono orgânico total, cuja oxidação segue uma reação de pseudo-primeira ordem com constante de velocidade inicial de -0,040 mim-1 e uma eficiência de corrente de 51%. Os resultados são superiores á fotocatálise convencional nas mesmas condições sem a polarização do fotoanodo que leva a 65% de mineralização sob constante de velocidade de -0,024 mim-1.

A pH optode based on thymol blue: application to determination of CO2 using flow injection analysis system

An optode based on thymol blue (TB), an acid-based indicator, has been constructed and evaluated as a detector in FIA system for CO2 determination. The dye was chemically immobilised on the surface of a bifurcated glass optical fibre bundle, using silanisation in organic media. In FIA system, hydrogen carbonate or carbonate samples are injected in a buffer carrier solution, and then are mixed with phosphoric acid solution to generate CO2, which diffuses through a PTFE membrane, in order to be collected in an acceptor carrier fluid, pumped towards to detection cell, in which the optode was adapted. The proposed system presents two linear response ranges, from 1.0 x 10-3 to 1.0 x 10-2 mol l-1, and from 2.0 x 10-2 to 0.10 mol l-1. The sampling frequency was 11 sample h-1, with good repeatability (R.S.D < 4 %, n = 10). In flow conditions the optode lifetime was 170 h. The system was applied in the analysis of commercial mineral water and the results obtained in the hydrogen carbonate determination did not differ significantly from those obtained by potentiometry, at a confidence level of 95 %.

Avaliação da eficiência nutricional de três procedências australianas de acácia-negra (Acacia mearnsii De Wild.)

O objetivo do presente trabalho foi avaliar a eficiência nutricional de macronutrientes N, P, K, Ca, Mg e S nos diferentes componentes das árvores de três procedências de acácia-negra (Acacia mearnsii De Wild.), com 2,4 anos de idade, plantadas em Butiá-RS (Brasil). As procedências selecionadas foram Lake George, Bodalla e Batemans Bay. Foi constatada variação na eficiência nutricional entre as procedências. Em ordem decrescente de eficiência de utilização dos nutrientes para produção de casca e madeira, cujos produtos são explorados dos povoamentos, obteve-se: Bodalla > Batemans Bay > Lake George. Embora a Lake George seja a procedência menos eficiente no uso dos nutrientes para formação de copa, casca e madeira, ela possui grande capacidade produtiva.

Conteúdo e exportação de micronutrientes em acácia-negra (Acacia Mearnsii De Wild.) procedência batemans bay (Austrália)

O objetivo do presente trabalho foi estimar o conteúdo e a exportação de micronutrientes (Mn, B, Cu, Zn e Fe) e o Na nos diferentes componentes de árvores de um povoamento de acácia-negra (Acacia mearnsii De Wild.), procedência australiana Batemans Bay, com 2,4 anos de idade, em Butiá-RS (Brasil). A biomassa total estimada foi de 36.155 kg/ha, apresentando distribuição de 46,0, 20,0, 19,5, 12,0 e 3,0%, na madeira do lenho, nas folhas, nos galhos vivos, na casca e nos galhos mortos, respectivamente. A proporção de micronutrientes acumulados na biomassa dos componentes da árvore foram 43,76% nas folhas, 26,94% na madeira do tronco, 19,56% nos galhos vivos, 7,21% na casca e 2,54% nos galhos mortos. A quantidade estimada de micronutrientes contidos na biomassa acima do solo foi 10,4 kg/ha, acumulados da seguinte forma: Na (58,84%), Fe (21,79%), Zn (9,16%), B (4,09%), Mn (4,59%) e Cu (1,54%). A casca e a madeira do lenho acumulou Na (21,47%), Fe (6,71%), Mn (2,11%), Zn (1,66%), B (1,58%) e Cu (0,63%). A copa (folhas e galhos vivos e mortos) acumularam Na (37,36%), Fe (15,07%), Zn (7,49%), B (2,53%), Mn (2,48%) e Cu (0,91%). A exploração intensiva de áreas com a procedência Batemans Bay gera suspeitas de possíveis ocorrências de deficiências nutricionais de Na nas rotações futuras, tornando necessário o emprego de fertilizantes para manter a produtividade do sítio.

Retorno de nutrientes via deposição de serapilheira em um povoamento de acácia-negra (Acacia mearnsii De Wild.) no Estado do Rio Grande do Sul

Com este estudo, objetivou-se avaliar os aspectos envolvidos na transferência de serapilheira e nutrientes ao solo em um povoamento de acácia-negra (Acacia mearnsii De Wild.) com 3 anos de idade, em Butiá-RS. Para tanto, foram alocadas, sistematicamente, cinco parcelas de 18 x 24 m, onde foram distribuídos 20 coletores de serapilheira de 1 m² (quatro em cada). Para coleta de galhos, foram demarcadas na superfície do solo 15 subparcelas de 3 x 3 m. O material interceptado foi coletado mensalmente entre maio/1999 e dezembro/2001. Após a coleta, o material foi separado em frações (folhas, galhos, flores, frutos e fezes), seco em estufa, pesado, moído e analisado quanto aos teores de N, P, K, Ca e Mg. A deposição média anual de serapilheira alcançou 5,85 Mg/ha, sendo composta por 77% de folhas, 3,7% de galhos, 2,5% de flores, 2,4% de frutos e 14,3% de fezes de lagarta. A baixa deposição de galhos foi atribuída à pequena intensidade do processo de desrama natural da espécie, principalmente nessa idade do povoamento. A deposição de serapilheira foi mais concentrada no verão. O maior fornecimento de nutrientes ao solo ocorreu através da fração folhas. As frações com maiores teores de N, P e Mg foram flores e frutos, somente perdendo para as folhas e fezes quanto à concentração de Ca e não diferindo em relação ao K. A magnitude de transferência de nutrientes ao solo, em kg/ha, foi igual a 106,2 de N > 62,8 de Ca > 41,8 de K > 9,4 de Mg > 3,4 de P.

Eficiência do uso de micronutrientes e sódio em três procedências de acácia-negra (Acacia mearnsii De Wild.)

Objetivou-se avaliar a eficiência nutricional de micronutrientes (Mn, B, Cu, Zn e Fe) e Na nos diferentes componentes das árvores de três procedências de acácia-negra (Acacia mearnsii), com 2,4 anos de idade, plantadas em Butiá-RS (Brasil). As procedências selecionadas foram Lake George, Bodalla e Batemans Bay. Constatou-se grande variação na eficiência nutricional entre as procedências. A Lake George, além de acumular maior biomassa total, foi também a mais eficiente na utilização dos nutrientes na produção de biomassa total das árvores. No entanto, a Bodalla mostrou ser a procedência mais eficiente no uso dos nutrientes para produção de biomassa da casca e da madeira.