UTILIZATION OF GIS AND SPATIAL ANALYSIS TECHNIQUES IN ARTISANAL AND SMALL SCALE MINING TO LOCATE A CENTRALIZED PROCESSING CENTRE

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

Improving the Utilization of Front-Line Service Delivery System Personnel

There are two types of work typically performed in services which differ in the degree of control management has over when the work must be done. Serving customers, an activity that can occur only when customers are in the system is, by its nature, uncontrollable work. In contrast, the execution of controllable work does not require the presence of customers, and is work over which management has some degree of temporal control. This paper presents two integer programming models for optimally scheduling controllable work simultaneously with shifts. One model explicitly defines variables for the times at which controllable work may be started, while the other uses implicit modeling to reduce the number of variables. In an initial experiment of 864 test problems, the latter model yielded optimal solutions in approximately 81 percent of the time required by the former model. To evaluate the impact on customer service of having front-line employees perform controllable work, a second experiment was conducted simulating 5,832 service delivery systems. The results show that controllable work offers a useful means of improving labor utilization. Perhaps more important, it was found that having front-line employees perform controllable work did not degrade the desired level of customer service.

National Level Stakeholders’ Perceptions of Facilitators and Barriers in Utilization of World Health Organizations’ Preventing Early Pregnancy Guidelines in National Level Health Policy Creation

Thesis (Master's)--University of Washington, 2016-07

Utilization of coal combustion residues in glass manufacturing process

The focus of paper is to asses and evaluate new utilisation method of coals combustion resides in glass manufacturing process. Mathematical model of glass manufacturing material balance was used to find favourable proportion of normally used batch materials and coal ash. It was found that possible to substitute up to 20 % of batch with coal ash. On the world glass production scale there is a potential to save 8,4 million tons of silica sand, 6 million tons of dolomite, 3 million tons of clay and 0,2 million tons of lime borate. Furthermore, potential to utilize 2 % of coal combustion products with suggested method.

Co-exposure to mycotoxins: the case of waste management workers

Introduction - Occupational exposures are characterized by being complex and associated to co-exposure to several contaminants by different exposure routes. Even if exposure occurs to only a chemical agent, it can have different exposure routes and can result in different health effects. The waste management setting is recognized by the presence of several chemical and biologic agents in the workplaces. Recently, it was reported occupational exposure to Aflatoxin B1 (AFB1) in one Portuguese waste management industry. However, data regarding to fungal burden showed that exposure to other mycotoxins should be expected. Aim of the study - The aim of the present work was to know if workers from this waste management industry were exposed to other mycotoxins besides AFB1.

Collection of waste batteries in Portugal and Brazil

Selected papers from the 3rd Edition of the International Conference on Wastes: Solutions, Treatments and Opportunities

NASA installations; accumulation, dissemination, and utilization of system failure history data.

Cover title.

Utilization of free and microencapsulated Rosmarinus oficinalis L. extracts as bioactives ingredientes for new functional foods developmen

Currently, many consumers search for food with functional characteristics beyond their nutritional properties. Thus, the concept of functional food becomes a hot topic, allowing the obtaining of health benefits, including disease prevention. In this context, plants are recognized as sources of a wide range of bioactives, mainly phenolic compounds. In particular, the Rosmarinus officina/is L., commonly referred as rosemary, has several phenolic compounds with different bioactive properties such as antioxidant, antiinflammatory and antimicrobial activities, among others [!]. Hence, this plant has great potential for incorporation into foods in order to confer bioactivity to the final products. However, it should be highlighted that the bioactive compounds if exposed to adverse environments, for example: light, moisture, extreme pH, storage, food processing conditions, can be degraded leading to the consequent loss of bioactivity [2]. The microencapsulation is an alternative to overcome this problematic of bioactive compounds, as also to ensure controlled release, or target deliver to a specific site [3]. In this work, lyophilized rosemary aqueous extract prepared by in:'usion was used as a functional ingredient for cottage cheeses, after proving that it possesses, both higher content in phenolic compounds and higher antioxidant activity, comparatively with the corresponding hydroethanolic extract. The rosemary aqueous extract revealed, for example, a DPPH scavenging activity with an EC50 value of 73.44±0.54j!g/mL and presented as main phenolic compound the caffeic acid dimer, commonly named as rosmarinic acid. For the functionalized cottage cheeses, a decrease of bioactivity was observed after seven days under storage in fridge, when the extracts were incorporated in its free form. Therefore, to preserve the antioxidant activity, the rosemary aqueous extract was efficiently microencapsulated by using an atomization/coagulation technique and alginate as the matrix material and thereafter incorporated into the cottage cheeses. The final microspheres showed a size, estimated by OM using a magnification of I OOx, ranging between 51.1 and 122.6 J!m and an encapsulation efficiency, estimated through an indirect method, approaching 100%. Overall, the introduction of both free and microencapsulated extracts did not change the nutritional value of cottage cheeses, providing bioactivity that was more preserved with microencapsulated extracts putting in evidence the importance of using microencapsulation to develop effective functional foods.

Impact of cost sharing on utilization of primary health care Services: providers versus household perspectives

This study is set to match and compare results of the analysis of impacts of cost sharing on households with those on health-care providers in two selected districts in Tanzania. The setting is intended to establish and compare concurrently the impact of cost sharing on health-care utilization as viewed from both the providers and beneficiary households. The findings of the study indicate that quality of primary health care has improved as a result of the introduction of cost sharing. Attendance and hence utilization in health facilities has also increased. Mortality rate, at least for one district has not worsened. By implication then, cost sharing appears to have a positive impact on the provision of primary health care, except for a few cases that fail to consult because of the fees. An appropriately managed exemption facility is likely to eliminate the negative impact.

The Architecture of Waste: Creating New Avenues for Public Engagement with Trash

The relationship between industry, waste, and urbanism is one fraught with problems across the United States and in particular American cities. The interrelated nature of these systems of flows is in critical need of re-evaluation. This thesis critiques the system of Municipal Solid Waste Management as it currently exists in American cities as a necessary yet undesirable ‘invisible infrastructure’. Industry and waste environments have been pushed to the periphery of urban environments, severing the relationship between the urban environment we inhabit and the one that is required to support the way we live. The flow of garbage from cities of high density to landscapes of waste has created a model of valuing waste as a linear system that separates input from output. This thesis aims to investigate ways that industry, waste, and urban ecologies can work to reinforce one another. The goal of this thesis is to repair the physical and mental separation of waste and public activity through architecture. This thesis will propose ways to tie urban waste infrastructure and public amenities together through the merging of architecture and landscape to create new avenues for public engagement with waste processes.

Utilization of nitrogen (15N) from urea and green manures by rice as affected by nitrogen fertilizer rate.

The use of green manures (GMs) in combination with nitrogen (N) fertilizer application is a promising practice to improve N fertilizer management in agricultural production systems. The main objective of this study was to evaluate the N use efficiency (NUE) of rice plant, derived from GMs including sunn hemp (Crotalaria juncea L.), millet (Pennisetum glaucum L.) and urea in the greenhouse. The experimental treatments included two GMs (sunn hemp-15N and millet-15N), absence of N organic source (without GM residues in soil) and four N rates, as urea-15N (0, 28.6, 57.2 and 85.8 mg N kg-1). The results showed that both rice grain and straw biomass yields under sunn hemp were greater than that of millet or without the application of GM. The NUE of rice under sunn hemp was greater than that under millet (18.9 and 7.8% under sunn hemp and millet, respectively). The urea N application rates did not affect the fertilizer NUE by rice (53.7%) with or without GMs. The NUE of GMs by rice plants ranged from 14.1% and 16.8% for root and shoot, respectively. The study showed that green manures can play an important role in enhancing soil fertility and N supply to subsequent crops.

Patterns of prescribing and utilization of asthma medications in a tertiary hospital in Dubai, United Arab Emirates

Purpose: To assess the prescribing patterns of asthma medications in a hospital in Dubai, United Arab Emirates (UAE) with regard to the demographic pattern of the population. Methods: One hundred fifty four patients, 83 male and 71 female, were randomly selected from the outpatient respiratory diseases clinic of a tertiary hospital in Dubai, UAE over a 3-month period. Patients were asked to complete a structured questionnaire and data were analyzed using STATA 12 software. Results: Most of the patients were within the age range of 0 – 10 years. About 86 % of the patients were overweight. Half of the patients were non-smokers while 51 % of them had a family history of asthma. About 54 % of the patients received multiple drug therapy of which two-drug combinations were widely prescribed (31 %). The most utilized drug classes were short acting β-agonists (42 %), xanthine drugs (16 %), leukotriene modifiers (14 %) and oral and intravenous corticosteroids (13 %). Statistical significant differences among the age groups (F = 2.33, p = 0.0275) were found. Conclusion: Primary prevention to reduce the level of exposure to common risk factors for asthma would be a vital step to control the disease. More resources should be channeled into educating physicians and patients on rational drug utilization to improve the quality of patients’ care.