Acylation of chiral alcohols: a simple procedure for chiral GC analysis

The use of iodine as a catalyst and either acetic or trifluoroacetic acid as a derivatizing reagent for determining the enantiomeric composition of acyclic and cyclic aliphatic chiral alcohols was investigated. Optimal conditions were selected according to the molar ratio of alcohol to acid, the reaction time, and the reaction temperature. Afterwards, chiral stability of chiral carbons was studied. Although no isomerization was observed when acetic acid was used, partial isomerization was detected with the trifluoroacetic acid. A series of chiral alcohols of a widely varying structural type were then derivatized with acetic acid using the optimal conditions. The resolution of the enantiomeric esters and the free chiral alcohols was measured using a capillary gas chromatograph equipped with a CP Chirasil-DEX CB column. The best resolutions were obtained with 2-pentyl acetates (α = 3.00) and 2-hexyl acetates (α = 1.95). This method provides a very simple and efficient experimental workup procedure for analyzing chiral alcohols by chiral-phase GC.

A comparative study of ballpoint ink ageing parameters using GC/MS.

For more than a decade scientists tried to develop methods capable of dating ink by monitoring the loss of phenoxyethanol (PE) over time. While many methods were proposed in the literature, few were really used to solve practical cases and they still raise much concern within the scientific community. In fact, due to the complexity of ink drying processes it is particularly difficult to find a reliable ageing parameter to reproducibly follow ink ageing. Moreover, systematic experiments are required in order to evaluate how different factors actually influence the results over time. Therefore, this work aimed at evaluating the capacity of four different ageing parameters to reliably follow ink ageing over time: (1) the quantity of solvent PE in an ink line, (2) the relative peak area (RPA) normalising the PE results using stable volatile compounds present in the ink formulation, (3) the solvent loss ratio (R%) calculated from PE results obtained by the analyses of naturally and artificially aged samples, (4) a modified solvent loss ratio version (R%*) calculated from RPA results. After the determination of the limits of reliable measurements of the analytical method, the repeatability of the different ageing parameters was evaluated over time, as well as the influence of ink composition, writing pressure and storage conditions on the results. Surprisingly, our results showed that R% was not the most reliable parameter, as it showed the highest standard deviation. Discussion of the results in an ink dating perspective suggests that other proposed parameters, such as RPA values, may be more adequate to follow ink ageing over time.

Unification of Emission Measurements in Paper and Pulp Mills

Tässä diplomityössä tavoitteena on selvittää käytännöt ja menetelmät, joilla UPM-Kymmenen sellu-, paperi- ja vaneritehtaat ympäri maailman mittaavat ja laskevat ilmapäästönsä. Tämä tehdään kyselylomakkeella, joka lähetetään tehtaiden ympäristöpäälliköille. Kaikki tärkeimmät seikat ilmapäästöihin liittyen, kuten vaaditut jatkuvatoimiset mittaukset, jaksottaiset mittaukset, raportointikäytäntö, kalibrointi jne. kysytään lomakkeessa. Kyselylomakkeessa painotetaan mittauskäytäntöä sellutehtaissa sekä energiantuotannossa. Saatujen tulosten perusteella annetaan ehdotuksia sekä ohjeita tulevaisuutta varten, jotta mittaustulosten kokoaminen helpottuisi ja vertailukelpoisuus paranisi. Työn kirjallisuusosuudessa selvitetään yleisimmät päästölähteet sekä päästökomponentit paperi –ja selluteollisuudessa. Näiden ei toivottujen yhdisteiden syntymekanismit sekä menetelmät niiden poistamiseksi savukaasuista on myös lyhyesti kuvailtu. Myös erilaiset analysointi- ja näytteenottomenetelmät on kerrottu. Erot tehtaiden ympäristöluvissa käydään läpi, jakaen tehtaat kolmeen maantieteelliseen ryhmään. Lupakäytäntöjen osalta Suomen osuutta on painotettu, sillä UPM-Kymmene on varsin Suomikeskeinen yhtiö tehtaiden lukumääriin ja sijainteihin katsottuna. Viranomaismääräykset sekä päästörajat muutamista tehtaista on esitetty havainnollistaakseen alueellisia eroja.

A comparative study of ballpoint ink ageing parameters using GC/MS

For more than a decade scientists tried to develop methods capable of dating ink by monitoring the loss of phenoxyethanol (PE) over time. While many methods were proposed in the literature, few were really used to solve practical cases and they still raise much concern within the scientific community. In fact, due to the complexity of ink drying processes it is particularly difficult to find a reliable ageing parameter to reproducibly follow ink ageing. Moreover, systematic experiments are required in order to evaluate how different factors actually influence the results over time. Therefore, this work aimed at evaluating the capacity of four different ageing parameters to reliably follow ink ageing over time: (1) the quantity of solvent PE in an ink line, (2) the relative peak area (RPA) normalising the PE results using stable volatile compounds present in the ink formulation, (3) the solvent loss ratio (R%) calculated from PE results obtained by the analyses of naturally and artificially aged samples, (4) a modified solvent loss ratio version (R%*) calculated from RPA results. After the determination of the limits of reliable measurements of the analytical method, the repeatability of the different ageing parameters was evaluated over time, as well as the influence of ink composition, writing pressure and storage conditions on the results. Surprisingly, our results showed that R% was not the most reliable parameter, as it showed the highest standard deviation. Discussion of the results in an ink dating perspective suggests that other proposed parameters, such as RPA values, may be more adequate to follow ink ageing over time.

Evaluation of the indication for surgical extraction of third molars according to the oral surgeon and the primary care dentist. Experience in the Master of Oral Surgery and Implantology at Barcelona University Dental School

Introduction: Third molar extraction is the most frequent procedure in oral surgery. The present study evaluates the indication of third molar extraction as established by the primary care dentist (PCD) and the oral surgeon, and compares the justification for extraction with the principal reason for patient consultation. Patients and method: A descriptive study was made of 319 patients subjected to surgical removal of a third molar in the context of the Master of Oral Surgery and Implantology (Barcelona University Dental School, Barcelona, Spain) between July 2004 and March 2005. The following parameters were evaluated: sex, age, molar, type of impaction, position according to the classifications of Pell and Gregory and of Winter, and the reasons justifying extraction. Results: The lower third molars were the most commonly extracted molars (73.7%). A total of 69.6% of the teeth were covered by soft tissues only. Fifty-six percent of the lower molars corresponded to Pell and Gregory Class IIB, while 42.1% were in the vertical position. The most common reason for patient reference to our Service of Oral Surgery on the part of the PCD was prophylactic removal (51.0% versus 46.1% in the case of the oral surgeon). Discussion and conclusions. Our results show prophylaxis to be the principal indication of third molar extraction, followed by orthodontic reasons. Regarding third molars with associated clinical symptoms or signs, infectious disease-including pericoronitis- was the pathology most often observed by the oral surgeon, followed by caries. This order of frequency was seen to invert in the case of third molars referred for extraction by the PCD. A vertical position predominated among the third molars with associated pathology

The Comprehensive Standardization of the Graphic Industry Production Chain in the Printing House

The purpose of this thesis was to investigate Job Definition Format (JDF) and how it could be used in printing house's systems. JDF is a very new information exchange standard, and it gives a lot of opportunities to the printing industry. JDF is the first standard, that has an ability to carry a print job from genesis through completion. Besides, JDF has an ability to bridge the communication gap between production and management information services. In the study of JDF we focused on examining how JDF will effect on printing industry .The thesis also examines printing houses's systems ability to work with JDF standard. The result of the study is a comprehensive picture, what is JDF. We also researched the system developers' visions, how JDF will effect on their products in the future.

Structural and optical properties of InAs/GaAs quantum structures

The goal of the thesis was to study fundamental structural and optical properties of InAs islands and In(Ga)As quantum rings. The research was carried out at the Department of Micro and Nanosciences of Helsinki University of Technology. A good surface quality can be essential for the potential applications in optoelectronic devices. For such device applications it is usually necessary to control size, density and arrangement of the islands. In order to study the dependence of the structural properties of the islands and the quantum rings on growth conditions, atomic force microscope was used. Obtained results reveal that the size and the density of the In(Ga)As quantum rings strongly depend on the growth temperature, the annealing time and the thickness of the partial capping layer. From obtained results it is possible to conclude that to get round shape islands and high density one has to use growth temperature of 500 ̊C. In the case of formation of In(Ga)As quantum rings the effect of mobility anisotropy is observed that so the shape of the rings is not symmetric. To exclude this effect it is preferable to use a higher annealing temperature of 570 ̊C. Optical properties were characterized by PL spectroscopy. PL emission was observed from buried InAs quantum dots and In(Ga)As quantum rings grown with different annealing time and temperature and covered with a various thickness of the partial capping layer.

Syntheses of niobium oxide in the presence of magnetic field and determination of physical properties

Now when the technology fast developing it is very important to control the formation of materials with better properties. In the scientific literature there is a number of works describing the influence of magnetic field on the properties and process of formation of materials. The goal of this master's thesis is to analyze the process of electrochemical synthesis of niobium oxide in the present of magnetic field, to compare properties of formed oxide films and to estimate the influence of magnetic field on the process and on the result of synthesis.

Evaluation of Teacher Education Programs by Students and Graduates

The purpose of this research was to do a repeated cross-sectional research on class teachers who study in the 4th year and also graduated at the Faculty of Education, University of Turku between the years of 2000 through 2004. Specifically, seven research questions were addressed to target the main purpose of the study: How do class teacher education masters’ degree senior students and graduates rate “importance; effectiveness; and quality” of training they have received at the Faculty of Education? Are there significant differences between overall ratings of importance; effectiveness and quality of training by year of graduation, sex, and age (for graduates) and sex and age (for senior students)? Is there significant relationship between respondents’ overall ratings of importance; effectiveness and their overall ratings of the quality of training and preparation they have received? Are there significant differences between graduates and senior students about importance, effectiveness, and quality of teacher education programs? And what do teachers’ [Graduates] believe about how increasing work experience has changed their opinions of their preservice training? Moreover the following concepts related to the instructional activities were studied: critical thinking skills, communication skills, attention to ethics, curriculum and instruction (planning), role of teacher and teaching knowledge, assessment skills, attention to continuous professional development, subject matters knowledge, knowledge of learning environment, and using educational technology. Researcher also tried to find influence of some moderator variables e.g. year of graduation, sex, and age on the dependent and independent variables. This study consisted of two questionnaires (a structured likert-scale and an open ended questionnaire). The population in study 1 was all senior students and 2000-2004 class teacher education masters’ degree from the departments of Teacher Education Faculty of Education at University of Turku. Of the 1020 students and graduates the researcher was able to find current addresses of 675 of the subjects and of the 675 graduates contacted, 439 or 66.2 percent responded to the survey. The population in study 2 was all class teachers who graduated from Turku University and now work in the few basic schools (59 Schools) in South- West Finland. 257 teachers answered to the open ended web-based questions. SPSS was used to produce standard deviations; Analysis of Variance; Pearson Product Moment Correlation (r); T-test; ANOVA, Bonferroni post-hoc test; and Polynomial Contrast tests meant to analyze linear trend. An alpha level of .05 was used to determine statistical significance. The results of the study showed that: A majority of the respondents (graduates and students) rated the overall importance, effectiveness and quality of the teacher education programs as important, effective and good. Generally speaking there were only a few significant differences between the cohorts and groups related to the background variables (gender, age). The different cohorts were rating the quality of the programs very similarly but some differences between the cohorts were found in the importance and effectiveness ratings. Graduates of 2001 and 2002 rated the importance of the program significantly higher than 2000 graduates. The effectiveness of the programs was rated significantly higher by 2001 and 2003 graduates than other groups. In spite of these individual differences between cohorts there were no linear trends among the year cohorts in any measure. In respondents’ ratings of the effectiveness of teacher education programs there was significant difference between males and females; females rated it higher than males. There were no significant differences between males’ and females’ ratings of the importance and quality of programs. In the ratings there was only one difference between age groups. Older graduates (35 years or older) rated the importance of the teacher training significantly higher that 25-35 years old graduates. In graduates’ ratings there were positive but relatively low correlations between all variables related to importance, effectiveness and quality of Teacher Education Programs. Generally speaking students’ ratings about importance, effectiveness and quality of teacher education program were very positive. There was only one significant difference related to the background variables. Females rated higher the effectiveness of the program. The comparison of students’ and graduates’ perception about importance, effectiveness, and quality of teacher education programs showed that there were no significant differences between graduates and students in the overall ratings. However there were differences in some individual variables. Students rated higher in importance of “Continuous Professional Development”, effectiveness of “Critical Thinking Skills” and “Using Educational Technology” and quality of “Advice received from the advisor”. Graduates rated higher in importance of “Knowledge of Learning Environment” and effectiveness of “Continuous Professional Development”. According to the qualitative data of study 2 some graduates expressed that their perceptions have not changed about the importance, effectiveness, and quality of training that they received during their study time. They pointed out that teacher education programs have provided them the basic theoretical/formal knowledge and some training of practical routines. However, a majority of the teachers seems to have somewhat critical opinions about the teacher education. These teachers were not satisfied with teacher education programs because they argued that the programs failed to meet their practical demands in different everyday situations of the classroom e.g. in coping with students’ learning difficulties, multiprofessional communication with parents and other professional groups (psychologists and social workers), and classroom management problems. Participants also emphasized more practice oriented knowledge of subject matter, evaluation methods and teachers’ rights and responsibilities. Therefore, they (54.1% of participants) suggested that teacher education departments should provide more practice-based courses and programs as well as closer collaboration between regular schools and teacher education departments in order to fill gap between theory and practice.

The influence of decision-maker effort and case complexity on appealed rulings subject to multi-categorical selection

This study extends the standard econometric treatment of appellate court outcomes by 1) considering the role of decision-maker effort and case complexity, and 2) adopting a multi-categorical selection process of appealed cases. We find evidence of appellate courts being affected by both the effort made by first-stage decision makers and case complexity. This illustrates the value of widening the narrowly defined focus on heterogeneity in individual-specific preferences that characterises many applied studies on legal decision-making. Further, the majority of appealed cases represent non-random sub-samples and the multi-categorical selection process appears to offer advantages over the more commonly used dichotomous selection models.

Fate of cadmium in rat renal tubules: a microinjection study.

109Cd was injected into the lumen of superficial proximal or distal tubules of rat kidneys, and recovery in the pelvic urine from the ipsilateral kidney was measured. Fractional recovery of labeled inulin always exceeded 90%. About 70% of injected inorganic Cd (CdCl2) was taken up by the epithelium of proximal tubules, while more than 90% of the injected amount was recovered after distal microinjection. The proximal fractional Cd uptake of a 1:1 (molar) Cd-L-cysteine complex was 82%, but was below 60% for a 5-10:1 molar ratio of cysteine:Cd. The chelate Cd-pentetic acid was recovered in final urine nearly quantitatively after proximal or distal microinjection. Fractional uptake of 109Cd from a Cd-metallothionein (Mt) complex, following proximal microinjection, ranged between 17 (Cd-Mt 0.19 mM) and 8% (Cd-Mt 1.5 mM). It is concluded that luminal Cd uptake by the tubular epithelium depends markedly on the chemical form of Cd and, when present, occurs mostly or exclusively in proximal tubules.

Comparison of Griffiths-II and Bayley-II tests for the developmental assessment of high-risk infants.

INTRODUCTION: Two important risk factors for abnormal neurodevelopment are preterm birth and neonatal hypoxic ischemic encephalopathy. The new revisions of Griffiths Mental Development Scale (Griffiths-II, [1996]) and the Bayley Scales of Infant Development (BSID-II, [1993]) are two of the most frequently used developmental diagnostics tests. The Griffiths-II is divided into five subscales and a global development quotient (QD), and the BSID-II is divided into two scales, the Mental scale (MDI) and the Psychomotor scale (PDI). The main objective of this research was to establish the extent to which developmental diagnoses obtained using the new revisions of these two tests are comparable for a given child. MATERIAL AND METHODS: Retrospective study of 18-months-old high-risk children examined with both tests in the follow-up Unit of the Clinic of Neonatology of our tertiary care university Hospital between 2011 and 2012. To determine the concurrent validity of the two tests paired t-tests and Pearson product-moment correlation coefficients were computed. Using the BSID-II as a gold standard, the performance of the Griffiths-II was analyzed with receiver operating curves. RESULTS: 61 patients (80.3% preterm, 14.7% neonatal asphyxia) were examined. For the BSID-II the MDI mean was 96.21 (range 67-133) and the PDI mean was 87.72 (range 49-114). For the Griffiths-II, the QD mean was 96.95 (range 60-124), the locomotors subscale mean was 92.57 (range 49-119). The score of the Griffiths locomotors subscale was significantly higher than the PDI (p<0.001). Between the Griffiths-II QD and the BSID-II MDI no significant difference was found, and the area under the curve was 0.93, showing good validity. All correlations were high and significant with a Pearson product-moment correlation coefficient >0.8. CONCLUSIONS: The meaning of the results for a given child was the same for the two tests. Two scores were interchangeable, the Griffiths-II QD and the BSID-II MDI.

Síntese do butirato de n-butila empregando lipase microbiana imobilizada em copolímero de estireno-divinilbenzeno

This work investigates the reaction parameters of an immobilized lipase in the esterification reaction of n-butanol and butyric acid. Microbial lipase from Candida rugosa was immobilized onto styrene-divinylbenzene copolymer (STY-DVB) and subsequently introduced in an organic medium containing substrates in appropriate concentrations. Heptane was selected as solvent on the basis of its compatibility with the resin and the enzyme. The influence of molar ratio of acid to alcohol, amount of immobilized lipase and temperature on the butyl butyrate formation was determined. The results were compared with those achieved with free lipase and Lipozyme (commercially immobilized lipase) under the same operational conditions.

Determinação da massa molar por crioscopia: terc-butanol, um solvente extremamente adequado

We intend to divulge an easy experiment that permits the determination of molar masses of various compounds by cryoscopy. The major advantage of this is the use of the tert-butyl alcohol as a solvent, which requires simple apparatus and easy procedures. The melting point of this alcohol is around 25 ºC, which makes it easy to freeze and then melt the solutions. This solvent has a high cryoscopic constant and is miscible with both polar and non-polar compounds. The molar masses of acetone, water, chloroform, dichloro-methane, ethanol, hexane, carbon tetrachloride and toluene were determined. The results were good except for water. Even though there are reliable techniques of molar mass determination nowadays, this method is still frequently taught in undergraduate courses.

Emprego do sal di-sódico de edta como padrão no preparo de soluções

The hydrated sodium salt of EDTA, Na2H2Y·2H2O, cannot be used as a primary standard for titrations due to uncertainties in the water content. An alkalimetric titration of the homogenized solid in the presence of a small excess of BaCl2·2H2O allows one to titrate quantitatively the released two hydrogen cations with end-point indication by phenolphthalein or potentiometry. This leads one to calculate the average molar mass of the reagent and its water content, allowing to use it to prepare EDTA standard solutions. One titrated sample led to the formula Na2H2Y·1.876 H2O, and 370.01 g.mol-1 for the average molar mass.