Devolatilization-induced pressure build-up: Implications for reaction front movement and breccia pipe formation

Generation of fluids during metamorphism can significantly influence the fluid overpressure, and thus the fluid flow in metamorphic terrains. There is currently a large focus on developing numerical reactive transport models, and with it follows the need for analytical solutions to ensure correct numerical implementation. In this study, we derive both analytical and numerical solutions to reaction-induced fluid overpressure, coupled to temperature and fluid flow out of the reacting front. All equations are derived from basic principles of conservation of mass, energy and momentum. We focus on contact metamorphism, where devolatilization reactions are particularly important owing to high thermal fluxes allowing large volumes of fluids to be rapidly generated. The analytical solutions reveal three key factors involved in the pressure build-up: (i) The efficiency of the devolatilizing reaction front (pressure build-up) relative to fluid flow (pressure relaxation), (ii) the reaction temperature relative to the available heat in the system and (iii) the feedback of overpressure on the reaction temperature as a function of the Clapeyron slope. Finally, we apply the model to two geological case scenarios. In the first case, we investigate the influence of fluid overpressure on the movement of the reaction front and show that it can slow down significantly and may even be terminated owing to increased effective reaction temperature. In the second case, the model is applied to constrain the conditions for fracturing and inferred breccia pipe formation in organic-rich shales owing to methane generation in the contact aureole.

Finding the right interactional temperature: do colder patients need more warmth in physician communication style?

Being aware of which communication style should be adopted when facing more difficult patients is important for physicians; it can help prevent patient reactions of dissatisfaction, mistrust, or non-adherence that can be detrimental to the process of care. Past research suggests that less agreeable patients are especially critical towards, and reactive to, their physician's communication style, compared to more agreeable patients. On the basis of the literature, we hypothesized that less agreeable patients would react more negatively than agreeable patients to lower levels of affiliativeness (i.e., warmth, friendliness) in the physicians, in terms of satisfaction with the physician, trust in the physician, and determination to adhere to the treatment. Thirty-six general practitioners (20 men/16 women) working in their own practice in Switzerland were filmed while interacting with 69 patients (36 men/33 women) of different ages (M = 50.7; SD = 18.19; range: 18-84) and presenting different medical problems (e.g., back pain, asthma, hypertension, diabetes). After the medical interview, patients filled in questionnaires measuring their satisfaction with the physician, their trust in the physician, their determination to adhere to the treatment, and their trait of agreeableness. Physician affiliativeness was coded on the basis of the video recordings. Physician gender and dominance, patient gender and age, as well as the gravity of the patient's medical condition were introduced as control variables in the analysis. Results confirmed our hypothesis for satisfaction and trust, but not for adherence; less agreeable patients reacted more negatively (in terms of satisfaction and trust) than agreeable patients to lower levels of affiliativeness in their physicians. This study suggests that physicians should be especially attentive to stay warm and friendly with people low in agreeableness because those patients' satisfaction and trust might be more easily lowered by a cold or distant physician communication style.

Influence of structural heterogeneities and of large scale topography on imbricate gravitational rock slope failures: New insights from 3-D physical modeling and geomorphological analysis

Initial topography and inherited structural discontinuities are known to play a dominant role in rock slope stability. Previous 2-D physical modeling results demonstrated that even if few preexisting fractures are activated/propagated during gravitational failure all of those heterogeneities had a great influence on mobilized volume and its kinematics. The question we address in the present study is to determine if such a result is also observed in 3-D. As in 2-D previous models we examine geologically stable model configuration, based upon the well documented landslide at Randa, Switzerland. The 3-D models consisted of a homogeneous material in which several fracture zones were introduced in order to study simplified but realistic configurations of discontinuities (e.g. based on natural example rather than a parametric study). Results showed that the type of gravitational failure (deep-seated landslide or sequential failure) and resulting slope morphology evolution are the result of the interplay of initial topography and inherited preexisting fractures (orientation and density). The three main results are i) the initial topography exerts a strong control on gravitational slope failure. Indeed in each tested configuration (even in the isotropic one without fractures) the model is affected by a rock slide, ii) the number of simulated fracture sets greatly influences the volume mobilized and its kinematics, and iii) the failure zone involved in the 1991 event is smaller than the results produced by the analog modeling. This failure may indicate that the zone mobilized in 1991 is potentially only a part of a larger deep-seated landslide and/or wider deep seated gravitational slope deformation.

Effect of Temperature on the Development and Survival of the Argentine Ant, Linepithema humile

The influence of temperature on the developmental times and survival of insects can largely determine their distribution. For invasive species, like the Argentine ant, Linepithema humile Mayr (Hymenoptera: Formicidae), these data are essential for predicting their potential range based on mechanistic models. In the case of this species, such data are too scarce and incomplete to make accurate predictions based on its physiological needs. This research provides comprehensive new data about brood survival and developmental times at a wide range of temperatures under laboratory conditions. Temperature affected both the complete brood development from egg to adult worker and each of the immature stages separately. The higher the temperature, the shorter the development times. Brood survival from egg to adult was low, with the maximum survival rate being only 16% at 26° C. Temperature also affected survival of each of the immature stages differently: eggs were negatively affected by high temperatures, while larvae were negatively affected by low temperatures, and the survival of pupae was apparently independent of environmental temperature. At 32° C no eggs survived, while at 18° C less than 2% of the eggs hatched into larva. The data from the present study are essential for developing prediction models about the distribution range of this tramp species based on its physiological needs in relation to temperature

From deep seated slope deformation to rock avalanche: Destabilization and transportation models of the Sierre landslide (Switzerland)

Sackung is a widespread post-glacial morphological feature affecting Alpine mountains and creating characteristic geomorphological expression that can be detected from topography. Over long time evolution, internal deformation can lead to the formation of rapidly moving phenomena such as a rock-slide or rock avalanche. In this study, a detailed description of the Sierre rock-avalanche (SW Switzerland) is presented. This convex-shaped postglacial instability is one of the larger rock-avalanche in the Alps, involving more than 1.5 billion m3 with a run-out distance of about 14 km and extremely low Fahrböschung angle. This study presents comprehensive analyses of the structural and geological characteristics leading to the development of the Sierre rock-avalanche. In particular, by combining field observations, digital elevation model analyses and numerical modelling, the strong influence of both ductile and brittle tectonic structures on the failure mechanism and on the failure surface geometry is highlighted. The detection of pre-failure deformation indicates that the development of the rock avalanche corresponds to the last evolutionary stage of a pre-existing deep seated gravitational slope instability. These analyses accompanied by the dating and the characterization of rock avalanche deposits, allow the proposal of a destabilization model that clarifies the different phases leading to the development of the Sierre rock avalanche.

Temperature-dependent elasticity of microtubules

Central to the biological function of microtubules is their ability to modify their length which occurs by addition and removal of subunits at the ends of the polymer, both in vivo and in vitro. This dynamic behavior is strongly influenced by temperature. Here, we show that the lateral interaction between tubulin subunits forming microtubule is strongly temperature dependent. Microtubules deposited on prefabricated substrates were deformed in an atomic force microscope during imaging, in two different experimental geometries. Microtubules were modeled as anisotropic, with the Young's modulus corresponding to the resistance of protofilaments to stretching and the shear modulus describing the weak interaction between the protofilaments. Measurements involving radial compression of microtubules deposited on flat mica confirm that microtubule elasticity depends on the temperature. Bending measurements performed on microtubules deposited on lithographically fabricated substrates show that this temperature dependence is due to changing shear modulus, implying that the lateral interaction between the protofilaments is strongly determined by the temperature. These measurements are in good agreement with previously reported measurements of the disassembly rate of microtubules, demonstrating that the mechanical and dynamic properties of microtubules are closely related.

Comparative winter thermoregulation and body temperature in three sympatric Apodemus species (A-alpicola, A-flavicollis, and A-sylvaticus)

When living in sympatry with Apodemus sylvaticus and A. flavicollis, A. alpicola dominates numerically at higher altitudes. A more efficient winter thermal isolation or a higher winter thermogenic capacity procuring a physiological advantage could explain at least part of this domination. We therefore measured body temperature (Tb), oxygen consumption (VO2), wet minimal thermal conductance (C) and non shivering thermogenesis (NST) at different ambient temperatures (Ta) on winter acclimated mice of the three species, and this for the first time in A. alpicola. NST was high and C low in the three species. No significant difference could be noticed either in Tb between 5 and -10 degrees C, in VO2 measurements at a Ta of -10 degrees C or in C. The NST measurements represent, respectively, 135.2% for A. sylvaticus, 142.8% for A. flavicollis and 140.5% for A. alpicola of the expected values, the values for A. sylvaticus being significantly lower than for the other two species. The basal metabolic rates (BMR) represent 169.4% for A. sylvaticus, 161.6% for A. flavicollis and 138.3% for A. alpicola of the expected values. Having removed the effect of body weight, the BMR value was significantly lower in A. alpicola than in A. flavicollis, but no difference could be noticed between A. sylvaticus and the other two species. In conclusion, the three species of mice have very similar acclimated thermoregulatory characteristics, well adapted to cold ambient conditions. One discriminating and advantageous factor could be the lower basal metabolic rate measured in A. alpicola compared to the other two species.

Linking temperature estimates and microstructures in deformed polymineralic mantle rocks

To constrain deformation temperatures of mantle shear zones, we studied a strike-slip shear zone (Hilti massif, Semail ophiolite, Oman) and focused on the interaction between microstructural mechanisms and chemical equilibration processes. Quantitative microfabric analysis on harzburgites with different deformation intensity (porphyroclastic tectonite, mylonite, and ultramylonite) was combined with orthopyroxene geothermometry. The average grain size of all phases decreases with decreasing shear zone thickness. Dynamic recrystallization of porphyroclasts in combination with dissolution-precipitation and nucleation result in small-sized, chemically equilibrated pyroxenes. The composition of orthopyroxene was used to calculate deformation temperatures. In the case of the porphyroclastic tectonites, the chemical composition of orthopyroxene has been reset by diffusion yielding temperature estimates of 880-900 degrees C. The mylonites were deformed by dislocation creep of olivine and show a broad range of calculated temperatures, which result from a combination of grain size reduction and inheritance of equilibrium compositions from earlier high-temperature events and diffusion. In mylonites, diffusion profiles combined with geothermometry and grain size analysis indicate a mylonitic deformation temperature of 800-900 degrees C possibly followed by diffusion. In ultramylonites, the smallest grains (<30 mu m) reveal equilibration at temperatures of similar to 700 degrees C during the last stages of ductile deformation, which was dominated by diffusion creep of olivine. Our results provide a crucial link between temperature and evolution of microstructures from dislocation creep to diffusion creep in mantle shear zones.

Slope processes in changing permafrost environments: a geomorphological and sedimentological approach

Estudi realitzat a partir d’una estada al Centro de Estudos Geograficos de la Universidade de Lisboa, Portugal, entre 2011 i 2012. En aquest grup he desenvolupat la meva recerca focalitzada en ambients polars en presència de permafrost, concretament centrada en l’extrem nord-occidental de la Península Antàrtica (Shetland del Sud) i a l’Alt Àrtic (Svalvard). Ambdós àrees han registrat un augment de temperatura molt significatiu les darreres dècades. La meva recerca ha contemplat l’anàlisi de registres sedimentaris (lacustres, eòlics, vessant) i la monitorització de processos geomorfològics actuals a fi efecte d’entendre la dinàmica ambiental present i passada (i.e. clima). Amb aquesta finalitat he realitzat tres campanyes de treball de camp a l’Antàrtida i dues a l’Àrtic. El posterior treball de laboratori i d’oficina està propiciant nombroses publicacions que donen fe dels èxits assolits. A més, cal enfatitzar altres activitats desenvolupades durant la BP-A: coneixement de com organitzar i gestionar una campanya antàrtica, docència universitària, participació en comitès, associacions i tribunals de tesis doctorals, organització i participació en nombroses conferències, treball de camp en noves àrees d’estudi, referee per revistes internacionals, etc. Tanmateix, la concessió del projecte de recerca HOLOANTAR, del qual en sóc l’Investigador Responsable, ha estat l’èxit més important d’aquesta estada. Aquest projecte m’està conferint la capacitat de gestionar i integrar la recerca de 16 investigadors de diferents nacionalitats des d’una perspectiva multidisciplinar. Tothora, cal remarcar que no s’ha assolit un dels èxits que pretenia el meu projecte de BP-A: la transferència del bagatge i coneixement adquirit al sistema de recerca català. Malgrat haver presentat la meva candidatura per un contracte BP-B per tal que aquest background après a l’estranger revertís a Catalunya, el procés de selecció emprat en la convocatòria ho ha impedit i m’obliga a continuar la meva recerca a l’estranger.

Evaluating thermal treeline indicators based on air and soil temperature using an air-to-soil temperature transfer model

In recent research, both soil (root-zone) and air temperature have been used as predictors for the treeline position worldwide. In this study, we intended to (a) test the proposed temperature limitation at the treeline, and (b) investigate effects of season length for both heat sum and mean temperature variables in the Swiss Alps. As soil temperature data are available for a limited number of sites only, we developed an air-to-soil transfer model (ASTRAMO). The air-to-soil transfer model predicts daily mean root-zone temperatures (10cm below the surface) at the treeline exclusively from daily mean air temperatures. The model using calibrated air and root-zone temperature measurements at nine treeline sites in the Swiss Alps incorporates time lags to account for the damping effect between air and soil temperatures as well as the temporal autocorrelations typical for such chronological data sets. Based on the measured and modeled root-zone temperatures we analyzed. the suitability of the thermal treeline indicators seasonal mean and degree-days to describe the Alpine treeline position. The root-zone indicators were then compared to the respective indicators based on measured air temperatures, with all indicators calculated for two different indicator period lengths. For both temperature types (root-zone and air) and both indicator periods, seasonal mean temperature was the indicator with the lowest variation across all treeline sites. The resulting indicator values were 7.0 degrees C +/- 0.4 SD (short indicator period), respectively 7.1 degrees C +/- 0.5 SD (long indicator period) for root-zone temperature, and 8.0 degrees C +/- 0.6 SD (short indicator period), respectively 8.8 degrees C +/- 0.8 SD (long indicator period) for air temperature. Generally, a higher variation was found for all air based treeline indicators when compared to the root-zone temperature indicators. Despite this, we showed that treeline indicators calculated from both air and root-zone temperatures can be used to describe the Alpine treeline position.

Functional diversity decreases with temperature in high elevation ant fauna

1. Severe environmental conditions filter community species compositions, forming clines of functional diversity along environmental gradients. Here, the changes in functional diversity in ant assemblages with severe environmental conditions in the Swiss Alps were investigated. 2. Eight sites were sampled along an elevation gradient (1800-2550 m). The variation in functional diversity was analysed along an elevation gradient considering four traits: social structure (monogynous vs. polygynous), worker size, pupal development, and nest structure. 3. Ant species richness and functional diversity decreased with decreasing temperature. Species found in colder habitats tended to live in subterranean nests rather than in mounds and exhibit a polymorphism in queen number, either within or across populations. The phylogenetic diversity did not decrease at colder temperature: Formicinae and Myrmicinae occupied the full range of elevations investigated. 4. An insulation experiment indicated that mounds are more thermally insulated against the cold compared with soil. The absence of a mound-building ant from high elevations probably results from a reduction in the amount of vegetal materials provided by coniferous trees. 5. More severe abiotic conditions at higher elevations act as a filter on ant assemblages, directly through physiological tolerances to the abiotic conditions and indirectly as the vegetation necessary for nest building shifts with elevation.</list-item

Evaluation of bedbath in critically ill patients: impact of water temperature on the pulse oximetry variation

This is a participant study, quasi-experimental, of a before and after type. A quantitative approach of biophysiological measures was used, represented by the saturation of oxygen measured by pulse oximeter (SpO2), and recorded on three occasions: before, during and after the bedbath in critically ill patients hospitalized at the ICU of a University Hospital in Brazil. Objective: to compare the SpO2 in various stages of the bath, with and without control of water temperature. Data collection was performed between December 2007 and April 2008 on a convenience sample consisting of 30 patients aged over 18 who had classification in TISS-28 from level II. Results show that water temperature control means a lower variation of SpO2 (p<0.05). No marked differences in variation of saturation between men and women or between age groups were established. In conclusion, heated and constant water temperature during the bedbath is able to minimize the fall of SpO2 that occurs while handling patients during procedures.