Transmitting focussed B1 field and SENSE reconstruction using an 8-element transceive torso phased array coil

In this work, a new design concept in chest imaging for MRI application is presented. A focused, 8-element transceive torso phased array coil is designed to investigate transmitting focused B1 field deep within the torso to enhance signal intensity and use in conjunction with SENSE reconstruction technique. Hybrid FDTD/MOM method is used to accurately predict the RF behavior inside the human torso. The simulation results reported herein demonstrate the feasibility of the design concept which shows that B1 field focusing with SENSE reconstruction is achievable, and the 8-element transceive torso phased array coil has the advantage to be used in transmit and receive mode for optimum and fast chest imaging.

Cardiac induced localised motion of the human torso detected by a long period grating fibre optic sensing scheme

Cardiovascular health of the human population is a major concern for medical clinicians, with cardiovascular diseases responsible for 48% of all deaths worldwide, according to the World Health Organisation. Therefore the development of new practicable and economical diagnostic tools to scrutinise the cardiovascular health of humans is a major driver for clinicians. We offer a new technique to obtain seismocardiographic signals covering both ballistocardiography (below 20Hz) and audible heart sounds (20Hz upwards). The detection scheme is based upon an array of curvature/displacement sensors using fibre optic long period gratings interrogated using a variation of the derivative spectroscopy interrogation technique. © 2014 SPIE.

Multi-frequency segmental bio-impedance device:design, development and applications

Bio-impedance analysis (BIA) provides a rapid, non-invasive technique for body composition estimation. BIA offers a convenient alternative to standard techniques such as MRI, CT scan or DEXA scan for selected types of body composition analysis. The accuracy of BIA is limited because it is an indirect method of composition analysis. It relies on linear relationships between measured impedance and morphological parameters such as height and weight to derive estimates. To overcome these underlying limitations of BIA, a multi-frequency segmental bio-impedance device was constructed through a series of iterative enhancements and improvements of existing BIA instrumentation. Key features of the design included an easy to construct current-source and compact PCB design. The final device was trialled with 22 human volunteers and measured impedance was compared against body composition estimates obtained by DEXA scan. This enabled the development of newer techniques to make BIA predictions. To add a ‘visual aspect’ to BIA, volunteers were scanned in 3D using an inexpensive scattered light gadget (Xbox Kinect controller) and 3D volumes of their limbs were compared with BIA measurements to further improve BIA predictions. A three-stage digital filtering scheme was also implemented to enable extraction of heart-rate data from recorded bio-electrical signals. Additionally modifications have been introduced to measure change in bio-impedance with motion, this could be adapted to further improve accuracy and veracity for limb composition analysis. The findings in this thesis aim to give new direction to the prediction of body composition using BIA. The design development and refinement applied to BIA in this research programme suggest new opportunities to enhance the accuracy and clinical utility of BIA for the prediction of body composition analysis. In particular, the use of bio-impedance to predict limb volumes which would provide an additional metric for body composition measurement and help distinguish between fat and muscle content.

Segmental body composition determination through a bioelectrical very large scale integration (VLSI) system

The purpose of this investigation was to develop new techniques to generate segmental assessments of body composition based on Segmental Bioelectrical Impedance Analysis (SBIA). An equally important consideration was the design, simulation, development, and the software and hardware integration of the SBIA system. This integration was carried out with a Very Large Scale Integration (VLSI) Field Programmable Gate Array (FPGA) microcontroller that analyzed the measurements obtained from segments of the body, and provided full body and segmental Fat Free Mass (FFM) and Fat Mass (FM) percentages. Also, the issues related to the estimate of the body's composition in persons with spinal cord injury (SCI) were addressed and investigated. This investigation demonstrated that the SBIA methodology provided accurate segmental body composition measurements. Disabled individuals are expected to benefit from these SBIA evaluations, as they are non-invasive methods, suitable for paralyzed individuals. The SBIA VLSI system may replace bulky, non flexible electronic modules attached to human bodies. ^

Aerosol properties associated with air masses arriving into the North East Atlantic during the 2008 Mace Head EUCAARI intensive observing period: an overview

As part of the EUCAARI Intensive Observing Period, a 4-week campaign to measure aerosol physical, chemical and optical properties, atmospheric structure, and cloud microphysics was conducted from mid-May to mid-June, 2008 at the Mace Head Atmospheric Research Station, located at the interface of Western Europe and the N. E. Atlantic and centered on the west Irish coastline. During the campaign, continental air masses comprising both young and aged continental plumes were encountered, along with polar, Arctic and tropical air masses. Polluted-continental aerosol concentrations were of the order of 3000 cm(-3), while background marine air aerosol concentrations were between 400-600 cm(-3). The highest marine air concentrations occurred in polar air masses in which a 15 nm nucleation mode, with concentration of 1100 cm(-3), was observed and attributed to open ocean particle formation. Continental air submicron chemical composition (excluding refractory sea salt) was dominated by organic matter, closely followed by sulphate mass. Although the concentrations and size distribution spectral shape were almost identical for the young and aged continental cases, hygroscopic growth factors (GF) and cloud condensation nuclei (CCN) to total condensation nuclei (CN) concentration ratios were significantly less in the younger pollution plume, indicating a more oxidized organic component to the aged continental plume. The difference in chemical composition and hygroscopic growth factor appear to result in a 40-50% impact on aerosol scattering coefficients and Aerosol Optical Depth, despite almost identical aerosol microphysical properties in both cases, with the higher values been recorded for the more aged case. For the CCN/CN ratio, the highest ratios were seen in the more age plume. In marine air, sulphate mass dominated the sub-micron component, followed by water soluble organic carbon, which, in turn, was dominated by methanesulphonic acid (MSA). Sulphate concentrations were highest in marine tropical air - even higher than in continental air. MSA was present at twice the concentrations of previously-reported concentrations at the same location and the same season. Both continental and marine air exhibited aerosol GFs significantly less than ammonium sulphate aerosol pointing to a significant organic contribution to all air mass aerosol properties.

Richard Aldington’s Images, the Metropolis and the Masses.

Richard Aldington’s city poems in the latter part of his 1915 collection Images are concerned with the masses who inhabit the modern city. Aldington is at pains to stress his distinction from those he perceives as an increasingly homogenized crowd. This paper examines the literary, linguistic and rhetorical strategies by which Aldington ‘others’ the masses, and sets them in the context of contemporary studies of the crowd, focusing on the work of Gustave Le Bon and C. F. G. Masterman. Aldington’s poetry is a product of the environment he sees as unsatisfactory, but he searches for solutions in a range of literary traditions which write the city.

Structure, transports and transformations of the water masses in the Atlantic Subpolar Gyre

We discuss the distributions and transports of the main water masses in the North Atlantic Subpolar Gyre (NASPG) for the mean of the period 2002–2010 (OVIDE sections 2002–2010 every other year), as well as the inter-annual variability of the water mass structure from 1997 (4x and METEOR sections) to 2010. The water mass structure of the NASPG, quantitatively assessed by means of an Optimum MultiParameter analysis (with 14 water masses), was combined with the velocity fields resulting from previous studies using inverse models to obtain the water mass volume transports. We also evaluate the relative contribution to the Atlantic Meridional Overturning Circulation (AMOC) of the main water masses characterizing the NASPG, identifying the water masses that contribute to the AMOC variability. The reduction of the magnitude of the upper limb of the AMOC between 1997 and the 2000s is associated with the reduction in the northward transport of the Central Waters. This reduction of the northward flow of the AMOC is partially compensated by the reduction of the southward flow of the lower limb of the AMOC, associated with the decrease in the transports of Polar Intermediate Water and Subpolar Mode Water (SPMW) in the Irminger Basin. We also decompose the flow over the Reykjanes Ridge from the East North Atlantic Basin to the Irminger Basin (9.4 ± 4.7 Sv) into the contributions of the Central Waters (2.1 ± 1.8 Sv), Labrador Sea Water (LSW, 2.4 ± 2.0 Sv), Subarctic Intermediate Water (SAIW, 4.0 ± 0.5 Sv) and Iceland–Scotland Overflow Water (ISOW, 0.9 ± 0.9 Sv). Once LSW and ISOW cross over the Reykjanes Ridge, favoured by the strong mixing around it, they leave the Irminger Basin through the deep-to-bottom levels. The results also give insights into the water mass transformations within the NASPG, such as the contribution of the Central Waters and SAIW to the formation of the different varieties of SPMW due to air–sea interaction.

Directive cadre sur l’eau - Bassin Loire-Bretagne. Contrôle de surveillance dans les masses d’eau côtières et de transition. Actions menées par Ifremer en 2014

Le contrôle de surveillance 2014 pour la DCE appliquée dans les eaux littorales de Loire Bretagne a porté sur les 25 masses d’eau côtières (sur 39 au total) et les 16 masses d’eau de transition (sur 30 au total) retenues au titre du contrôle de surveillance. L’ensemble des résultats acquis, aussi bien sur les paramètres biologiques que chimiques, a permis de mettre à jour l’évaluation de l’état des masses d’eau affiché sur l’atlas DCE accessible sur la page web d’Envlit correspondante.

Expertise sur 3 masses d’eau de la Réunion (étangs de Saint-Paul et du Gol) et de Martinique (étang des Salines) : typologie et surveillance DCE

Trois masses d’eau situées sur le littoral de l’île de la Réunion et de la Martinique présentent des fonctionnements et des caractéristiques atypiques, ce qui pose actuellement des difficultés dans le cadre de l’application de la DCE. Les deux masses d’eau réunionnaises, l’étang du Gol et l’étang de Saint-Paul, sont actuellement identifiées en tant que plans d’eau au titre de la DCE. La masse d’eau martiniquaise, l’étang des Salines, est quant à elle identifiée en tant que masse d’eau de transition. L’objectif de cette étude est d’apporter une expertise, sur la base des données disponibles et des échanges avec les experts locaux et nationaux, concernant : · la typologie des masses d’eau, · les paramètres chimiques, physico-chimiques et biologiques pertinents à suivre dans le cadre de la surveillance DCE, · des pistes de travail pour consolider des grilles de diagnostic sur les masses d’eau. Cette expertise s’appuie également sur les retours d’expériences et les études réalisées dans le cadre de la mise en oeuvre de la DCE sur les lagunes des bassins Rhône Méditerranée et Corse, dont la morphologie et le fonctionnement se rapprochent des trois masses d’eau étudiées. L’analyse des données et études fournies sur les étangs réunionnais du Gol et de Saint-Paul conduit à poser la question de la pertinence de leur maintien dans le référentiel des masses d’eau au titre de la DCE. Si le choix est cependant fait de conserver ces étangs en tant que masses d’eau DCE, leurs caractéristiques correspondraient à la typologie des eaux de transition et à la gamme de salinité oligohaline. Des recommandations sont formulées en termes d’études complémentaires visant à préciser le fonctionnement hydrologique de ces étangs et de priorisation des suivis de leur qualité physico-chimique et biologique, pour aboutir à une surveillance DCE pérenne. Les recommandations formulées à partir des données fournies sur l’étang martiniquais des Salines concernent l’évaluation des pressions anthropiques pesant sur cette masse d’eau, la priorisation des suivis de sa qualité chimique, physico-chimique et biologique dans le cadre de la surveillance DCE. Des pistes sont également données pour l’élaboration et la consolidation de grilles de diagnostic adaptées à cet étang.