Evaluation of whole toasted and extruded soybean on the performance of broilers

This experiment was conducted to compare the performance of 1260 chicks fed diets containing soybean meal plus soybean oil (SBM + oil), whole extruded soybean (ESB) and whole steam toasted soybean (TSB), with two protein levels. A complete randomized design was used, with six treatments and 3 replicates of each sex. The treatments consisted of a factorial arrangement 2 x 3 x 2 to test three soybean types (SBM + oil, ESB and TSB), two protein levels (optimum and suboptimum) and two sexes. From 1 to 49 days of age, the tested soybean types did not affect the diet intake. However, ESB provided higher weight gain in relation to SBM + oil, but it did not differ from TSB. The feed:gain ratio obtained with ESB and TSB was better in relation to SBM + oil. There was no difference between the nutritional value of TSB and ESB, because they provided similar performance to the birds.

Intraspecific evolution of Rhizoctonia solani AG-1 IA associated with soybean and rice in Brazil based on polymorphisms at the ITS-5.8S rDNA operon

Rhizoctonia solani AG-1 IA causes leaf blight on soybean and rice. Despite the fact that R. solani AG-1 IA is a major pathogen affecting soybean and rice in Brazil and elsewhere in the world, little information is available on its genetic diversity and evolution. This study was an attempt to reveal the origin, and the patterns of movement and amplification of epidemiologically significant genotypes of R. solani AG-1 IA from soybean and rice in Brazil. For inferring intraspecific evolution of R. solani AG-1 IA sampled from soybean and rice, networks of ITS-5.8S rDNA sequencing haplotypes were built using the statistical parsimony algorithm from Clement et al. (2000) Molecular Ecology 9: 1657-1660. Higher haplotype diversity (Nei M 1987, Molecular Evolutionary Genetics Columbia University Press, New york: 512p.) was observed for the Brazilian soybean sample of R. solani AG-1 IA (0.827) in comparison with the rest of the world sample (0.431). Within the south-central American clade (3-2), four haplotypes of R. solani AG-1 IA from Mato Grosso, one from Tocantins, one from Maranhao, and one from Cuba occupied the tips of the network, indicating recent origin. The putative ancestral haplotypes had probably originated either from Mato Grosso or Maranhao States. While 16 distinct haplotypes were found in a sample of 32 soybean isolates of the pathogen, the entire rice sample (n=20) was represented by a single haplotype (haplotype 5), with a worldwide distribution. The results from nested-cladistic analysis indicated restricted gene flow with isolation by distance (or restricted dispersal by distance in nonsexual species) for the south-central American clade (3-2), mainly composed by soybean haplotypes.

Effect of the type of environmental stress on the emergence of sunflower (Helianthus annus L.), soybean (Glycine max (L.) Merril) and maize (Zea mays L.) seeds with different levels of vigor

Sowing is a critical time in the cycle of a crop and the seeds are frequently exposed to adverse conditions that may compromise the establishment of seedlings in the field. on this basis, the objective of the present study was to determine the effect of types of environmental stress on the emergence of sunflower, maize and soybean seeds with different levels of vigor. High vigor seeds were artificially aged in order to obtain medium and low vigor seeds and then they were sown in clay soil in plastic boxes and submitted to the following types of environmental stress during the germination process : 1) high temperature (35degreesC), 2) low temperature (15 or 18degreesC), 3) water excess (Psi > -0.0001 MPa), 4) water deficiency (Psi approximately equal to -1.1; -1.2 and -0.6 MPa for sunflower, maize and soybean, respectively), 5) sowing at a depth of 7 cm and 6) pathogenic infection of sunflower seeds with Alternaria helianthi, of maize seeds with Fusarium moniliforme and of soybean seeds with Colletotrichum dematium, var. truncata. The results were compared to those obtained with controls sown under optimal condition. It was concluded that: 1) the effect of seed vigor on emergence depends on the type of enviromental stress to which the seeds are exposed, 2) the stress to which the the seeds demonstrated highest sensitivity varied with species and 3) high temperature stress was the one that most impaired the emergence of the three species.

Effects of some mineral deficiencies on the development of the soybean plant, Glycine max (L.) Merril cv Santa Rosa

The present work studies Ca, B and Zn omission on the development of soybean plants (Glycine max (L.) Merrill cv Santa Rosa). The experiment was carried out as hydroponic culture, viith complete Hoagland & Arnon nutrient solution nr. 2 (C), lacking calcium (-Ca), lacking boron (-B) or lacking zinc (-Zn), a total of 4 treatments. Seven samplings were made to determine: total dry matter (g), root dry matter (g), stem dry matter (g) and leaf dry matter (g). Results showed that Ca and B omissions decreased dry weight. Lack of Zn did not affect dry weight.

Antioxidant effect of saponin: potential action of a soybean flavonoid on glucose tolerance and risk factors for atherosclerosis

At the present time, much attention is being paid to antioxidant substances because many pathological conditions are associated with oxidative stress. The purpose of the present study was to discover the potency of saponin (2-phenyl-benzopyrane), a soybean flavonoid, with respect to its hypoglycaemic and hypolipidaemic action, and the association of these effects with oxidative stress. Male Wistar rats were divided into two groups (n = 6): control group and saponin-treated group (60 mg/kg) during 30 days. Saponin had no effects on glucose tolerance. Although no changes had been observed in low-density lipoprotein-cholesterol, saponin-treated animals had increased low-density lipoprotein-cholesterol/triacylglycerol ratio and decreased triacylglycerol, very low-density lipoprotein-cholesterol and total/high-density lipoprotein-cholesterol ratio than the control group. Saponin-treated rats showed lower lipid hydroperoxide than control rats, indicating decreased potential to atherosclerosis. No alterations were observed in antioxidant enzymes, superoxide dismutase and glutathione peroxidase, while lipid hydroperoxide were decreased in saponin-treated rats. In conclusion, the beneficial effects of saponin on serum lipids were related to a direct saponin antioxidant activity.

Effect of doses of fungicides and plant resistance activators on the control of Rhizoctonia foliar blight of soybean, and on Rhizoctonia solani AG1-IA in vitro development

Rhizoctonia foliar blight (RFB) of soybean [Glycine max (L.) Merrill] occurs in many tropical and subtropical regions, causing yield reductions of up to 70% and in Brazil, up to 60%. The disease is caused by Rhizoetonia solani AG1-IA and AG1-IB, and by AG2-3 in Japan. RFB occurs in the North, Northeast and Mid-west regions of Brazil. Chemical control remains the only effective method of controlling RFB, but its efficiency depends upon environmental conditions. In this study, 18 fungicides, salicylic acid (SA) and acibenzolar-s-methyl (ASM) were evaluated on R. solani AG1-IA in vitro, by mycelial growth rating and estimating effective concentration for 50% (EC 50) and 90% (EC 90) inhibition of mycelial growth, and in vivo by reduction of disease severity on soybean plants in greenhouse conditions. Mycelial growth was strongly inhibited by the fungicides pyraclostrobin + boscalid and fludioxonil. Preventive fungicide applications were the most effective. Strobilurins were more efficient both in preventive and curative applications. Best results with plant resistance activators were obtained with SA (2.5 mM) sprayed at 20 d before inoculation and with ASM (12.5 mg a.i. l(-1)) 10 d before inoculation. (c) 2005 Elsevier Ltd. All rights reserved.

The effect of polymerization cycles on porosity of microwave-processed denture base resin

Statement of problem. Although most of the physical properties of denture base resin polymerized by microwave energy have been shown to be similar to resins polymerized by the conventional heat polymerization method, the presence of porosity is a problem.Purpose. This study evaluated the effect of different microwave polymerization cycles on the porosity of a denture base resin designed for microwave polymerization.Material and methods. Thirty-two rectangular resin specimens (65 X 40 X 5 mm) were divided into 3 experimental groups (A, B, and C; Onda-Cryl, microwave-polymerized resin) and I control group (T; Classico, heat-polymerized resin), according to the following polymerization cycles: (A) 500 W for 3 minutes, (B) 90 W for 13 minutes + 500 W for 90 seconds, (C) 320 W for 3 minutes + 0 W for 4 minutes + 720 W for 3 minutes, and (T) 74degreesC for 9 hours. Porosity was calculated by measurement of the specimen volume before and after its immersion in water. Data were analyzed using 1-way analysis of variance (alpha = .05).Results. The mean values and SDs of the percent mean porosity were: A = 1.05% +/- 0.28%, B = 0.91% +/- 0.15%, C = 0.88% +/- 0.23%, T = 0.93% +/- 0.23%. No significant differences were found in mean porosity among the groups evaluated.Conclusion. Within the limitations of this study, a denture base resin specifically designed for microwave Polymerization tested was not affected by different polymerization cycles. Porosity was similar to the conventional heat-polymerized denture base resin tested.

Study of synthesis variables in the nanocrystal growth behavior of tin oxide processed by controlled hydrolysis

Tin dioxide nanoparticle suspensions were synthesized at room temperature by the hydrolysis reaction of tin chloride (II) dissolved in ethanol. The effect of the initial tin (II) ion concentration, in the ethanolic solution, on the mean particle size of the nanoparticles was studied. The Sn2+ concentration was varied from 0.0025 to 0.1 M, and all other synthesis parameters were kept fixed. Moreover, an investigation of the effect of agglomeration on the nanoparticle characteristics (i.e., size and morphology) was also done by modifying the pH of the SnO2 suspensions. The different samples were characterized by transmission electron microscopy, optical absorption spectroscopy in the ultraviolet range, and photoluminescence measurements. The results show that higher initial ion concentrations and agglomeration lead to larger nanoparticles. The concentration effect is explained by enhanced growth due to a higher supersaturation of the liquid medium. However, it was observed that the agglomeration of the nanoparticles in suspension induce coarsening by the oriented-attachment mechanism.

Photoluminescence of nanostructured PbTiO3 processed by high-energy mechanical milling

This letter reports on a process to prepare nanostructured PbTiO3 (PT) at room temperature with photoluminescence (PL) emission in the visible range. This process is based on the high-energy mechanical milling of ultrafine PbTiO3 powder. The results suggest that high-energy mechanical milling modifies the particle's structure, resulting in localized states in an interfacial region between the crystalline PT and the amorphous PT. These localized states are believed to be responsible for the PL obtained with short milling times. When long milling times are employed, the amorphous phase that is formed causes PL behavior. An alternative method to process nanostructured wide-band-gap semiconductors with active optical properties such as PL is described in this letter. (C) 2001 American Institute of Physics.

POTASSIUM FERTILIZATION, ROOT MORPHOLOGY AND POTASSIUM ABSORPTION BY SOYBEAN

A greenhouse experiment studied the effect of potassium fertilization on soybean (Glycine max L. Merrill) root morphology and on K absorption by six soybean cultivars of different maturation groups and growth habits. The Plants were grown up to 70 days after plant emergence, in pots containing 6.0 kg of soil. In the absence of K, no significant difference in K absorption was observed among the cultivars or in root length and surface, but root mean radius was correlated to K absorption. Differences in K absorption were not associated with root characteristics in the presence of K fertilization. Physiological adjustments in K uptake, as well as K availability in the soil, were more important in soybean nutrition than were morphological adjustments in the root system. The results were not associated with plant growth habit or with maturation group.

Flavonoid increase in soybean as a response to Nezara viridula injury and its effect on insect-feeding preference

The ability of the stink bug (Nezara viridula) to induce and/or increase production of chemical defenses, i.e., flavonoids, in immature seeds of five genotypes of soybean (BR-16, IAC-100, PI 227687, PI 229358, and PI 274454) was investigated under greenhouse and laboratory conditions. Samples from pods of each genotype damaged by stink bug were analyzed for flavonoid content with high performance liquid chromatography. A dual-choice test was conducted to evaluate the feeding preference of N. viridula comparing BR-16 pods treated with extracts of PI 227687 seeds (with and without stink-bug injury), with water-treated pods. Seeds of PI 227687 damaged by N. viridula presented the highest concentration (352 mug/g) of daidzin (4'-hydroxyisoflavone-7-glucoside). The same trend was observed with genistin (4',5,7-trihydroxyisoflavone-7-glucoside): PI 227687 contained 142.4 mug/g, PI 274454, 31.6 mug/g, and PI 229358, 38.9 mug/g. Seeds damaged by stink bugs had higher isoflavone contents (daidzin and genistin), compared to controls. However, after being damaged, PI 274454 and PI 229358 produced less genistin than the other genotypes and no differences in concentration between damaged and nondamaged plants of this genotypes were observed. The numbers of observations of the insect feeding and the numbers of stylet sheaths left in water-treated BR-16 pods were greater than in those treated with PI 227687 extracts. The insects fed for longer periods on BR-16 pods treated with extract of PI 227687 without injury compared to those that were treated with extract of PI 227687 previously injured by stink bugs. Extracts of PI 227687 pods ( damaged or not) were deterrent to adults of N. viridula, and insect injury increased concentrations of daidzin and genistin in PI 227687 seeds. The deterrence seemed to be more pronounced after pods had suffered stink-bug injury.

Enhanced electrical property of nanostructured Sb-doped SnO2 thin film processed by soft chemical method

The effect of the Sb addition on the microstructural and electrical conductivity of the SnO2 thin film was studied in this work. Experimental results show that the Sb addition allowed to control the grain size and electrical conductivity of the SnO2 thin film, resulting in a nanostructured material. The nanostructured Sb-doped SnO2 thin films present high electrical conductivity, even in the presence of high porosity, supporting the hypothesis that nanostructured material must possess strong electrical conductivity. This work involves important aspects that can be applied to the development of high performance transparent conducting thin film. (C) 2003 Elsevier B.V. All rights reserved.

Determination of pore size distribution in soybean seed coats by mercury porosimetry

In this work we applied mercury porosimetry for the investigation of soybean seed coats. By using this method it was possible to determine the pore size distribution and also the pore size dispersion that is present in seed coats. The results showed that for the studied soybean genotype the seed coats had a characteristic pore diameter, but deviation of this size was not negligible. Finally, the results were confirmed by electron microscopy.