951 resultados para one-meson-exchange: independent-particle shell model


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: Lifetimes of nuclear excited states in fission fragments have been studied in the past following isotope separation, thus giving access mainly to the fragments' daughters and only to long-lived isomeric states in the primary fragments. For the first time now, short-lived excited states in the primary fragments, produced in neutron-induced prompt fission of U-235 and Pu-241, were studied within the EXILL&FATIMA campaign at the intense neutron-beam facility of the Institute Laue-Langevin in Grenoble. Purpose: We aim to investigate the quadrupole collective properties of neutron-rich even-even Xe-138,Xe-140,Xe-142 isotopes lying between the double shell closure N = 82 and Z = 50 and a deformed region with octupole collectivity. Method: The gamma rays emitted from the excited fragments were detected with a mixed array consisting of 8 HPGe EXOGAM Clover detectors (EXILL) and 16 LaBr3(Ce) fast scintillators (FATIMA). The detector system has the unique ability to select the interesting fragment making use of the high resolution of the HPGe detectors and determine subnanosecond lifetimes using the fast scintillators. For the analysis the generalized centroid difference method was used. Results: We show that quadrupole collectivity increases smoothly with increasing neutron number above the closed N = 82 neutron shell. Our measurements are complemented by state-of-the-art theory calculations based on shell-model descriptions. Conclusions: The observed smooth increase in quadrupole collectivity is similar to the evolution seen in the measured masses of the xenon isotopic chain and is well reproduced by theory. This behavior is in contrast to higher Z even-even nuclei where abrupt change in deformation occurs around N = 90.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The first direct experimental evidence of a multiparticle-hole ground state configuration of the neutron-rich Mg-33 isotope has been obtained via intermediate energy (400 A MeV) Coulomb dissociation measurement. The major part similar to(70 +/- 13)% of the cross section is observed to populate the excited states of Mg-32 after the Coulomb breakup of Mg-33. The shapes of the differential Coulomb dissociation cross sections in coincidence with different core excited states favor that the valence neutron occupies both the s(1/2) and p(3/2) orbitals. These experimental findings suggest a significant reduction and merging of sd-pf shell gaps at N similar to 20 and 28. The ground state configuration of Mg-33 is predominantly a combination of Mg-32(3.0,3.5MeV; 2(-), 1(-)) circle times nu(s1/2), Mg-32(2.5MeV; 2(+)) circle times nu(p3/2), and Mg-32(0; 0(+)) circle times nu(p3/2). The experimentally obtained quantitative spectroscopic information for the valence neutron occupation of the s and p orbitals, coupled with different core states, is in agreement with Monte Carlo shell model (MCSM) calculation using 3 MeV as the shell gap at N = 20.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de mest. em Física, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2004

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências da Saúde, Programa de Pós-Graduação em Ciências da Saúde, 2016.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This research develops an econometric framework to analyze time series processes with bounds. The framework is general enough that it can incorporate several different kinds of bounding information that constrain continuous-time stochastic processes between discretely-sampled observations. It applies to situations in which the process is known to remain within an interval between observations, by way of either a known constraint or through the observation of extreme realizations of the process. The main statistical technique employs the theory of maximum likelihood estimation. This approach leads to the development of the asymptotic distribution theory for the estimation of the parameters in bounded diffusion models. The results of this analysis present several implications for empirical research. The advantages are realized in the form of efficiency gains, bias reduction and in the flexibility of model specification. A bias arises in the presence of bounding information that is ignored, while it is mitigated within this framework. An efficiency gain arises, in the sense that the statistical methods make use of conditioning information, as revealed by the bounds. Further, the specification of an econometric model can be uncoupled from the restriction to the bounds, leaving the researcher free to model the process near the bound in a way that avoids bias from misspecification. One byproduct of the improvements in model specification is that the more precise model estimation exposes other sources of misspecification. Some processes reveal themselves to be unlikely candidates for a given diffusion model, once the observations are analyzed in combination with the bounding information. A closer inspection of the theoretical foundation behind diffusion models leads to a more general specification of the model. This approach is used to produce a set of algorithms to make the model computationally feasible and more widely applicable. Finally, the modeling framework is applied to a series of interest rates, which, for several years, have been constrained by the lower bound of zero. The estimates from a series of diffusion models suggest a substantial difference in estimation results between models that ignore bounds and the framework that takes bounding information into consideration.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Purpose – The purpose with this study is to investigate which factors that needs to be considered for sourcing decisions to ensure an optimal long-term decision, and which of these factors that can be quantified in a product costing model. To fulfill this purpose two research questions have been proposed: Which factors needs to be considered for a sourcing decision? Which of these factors that needs to be considered can be quantified in a product costing model? Method – A case study was conducted to fulfill the purpose of this study. The case study produced empirical data through interviews and document studies. The empirical data was interpreted and analyzed on the basis of the theoretical framework, created through literature studies. This process produced the result of this study. Findings – Factors to be considered for a sourcing decision have been identified and categorized in four over-arching categories: unit cost, logistical factors, capability factors and risk factors. These factors have been quantified in a product costing model. A preparatory decision model was created to further integrate some risk factors that could not be quantified. Implications – Both the make or buy decision and the manufacturing location decision have been considered in the product costing model presented in this study. The product costing model visualize and take into account hidden costs, rarely considered in sourcing decisions. This further enables optimal long-term sourcing decisions. Limitations – Risk factors remain difficult to quantify. This makes it difficult to determine the cost of risk factors, and as a result of that, to include them in a product costing model. Companies with similar conditions suites the model since the case study was conducted at only one company. Whether the product costing model is true for business in other contexts remain uncertain.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

La prevalencia de sintomatología osteomuscular en los trabajadores va en aumento. La influencia de factores propios de la labor como la postura, los movimientos repetitivos, el tipo de remuneración y los factores sociodemográficos como la edad, el sexo y el índice de masa corporal pueden influir en la aparición temprana de sintomatología osteomuscular. Objetivo: Determinar la prevalencia de sintomatología musculoesquelética en trabajadores de una empresa Outsourcing operativa en la ciudad de Bogotá Colombia en el año 2016. Métodos: Se realizó un estudio de corte transversal para la estimación de la prevalencia de sintomatología musculoesquelética para lo cual se utilizó una fuente de datos secundaria de 323 trabajadores de una empresa Outsourcing operativa. Se tuvieron en cuenta las variables sociodemográficas y laborales. El análisis descriptivo incluyó el cálculo de la media y los porcentajes. El análisis comparativo se realizó por medio del Test Chi² con una significancia estadística p <0.05 para un intervalo de confianza del 95%. Por último se realizó un análisis de regresión logístico. Resultados: Del total de la población estudiada, la cual fue de 323 personas, el 55.4% de los trabajadores corresponde al sexo femenino y el 44.6% corresponde al sexo masculino. El promedio de edad fue de 30.34 años. El tiempo en el cargo que presentó mayor prevalencia fue entre 13 a 60 meses con un porcentaje de 60,7%. Para el estudio se incluyó la variable de tipo de remuneración con un porcentaje de 58.2% de pago por salario mínimo legal mensual vigente (SMLMV), mientras que el 41.8% de la población recibió pago por destajo. La prevalencia de sintomatología por segmentos en la población fue de 17.3% para espalda baja, el 12,1% para mano y muñeca, el 10.2% para piernas, el 7.7% para espalda alta, el 7,4% para cuello, el 7,1% para hombro, el 6.2% para brazos y antebrazos y el 2,5% para dedos. Se aplicó un modelo de regresión logístico, analizando variables de confusión e interacción, estas últimas no aportaron al modelo. Con la variable tipo de remuneración, se encontró una asociación estadística significativa (P= 0.005) con la sintomatología. Para las demás variables sociodemográficas y extra-laborales no se obtuvieron resultados estadísticamente significativos Conclusión: Teniendo en cuenta los resultados obtenidos en el estudio se encontró asociación estadísticamente significativa entre la sintomatología de los segmentos cuello y manos con la variable sociodemográfica (sexo) y la variable laboral (tipo de remuneración: Destajo). Para las demás variables no se encontró asociación. Se sugiere realizar programas de vigilancia epidemiológica para hacerle seguimiento a esta población y que permitan la prevención de enfermedades de origen laboral.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this work, we explore and demonstrate the potential for modeling and classification using quantile-based distributions, which are random variables defined by their quantile function. In the first part we formalize a least squares estimation framework for the class of linear quantile functions, leading to unbiased and asymptotically normal estimators. Among the distributions with a linear quantile function, we focus on the flattened generalized logistic distribution (fgld), which offers a wide range of distributional shapes. A novel naïve-Bayes classifier is proposed that utilizes the fgld estimated via least squares, and through simulations and applications, we demonstrate its competitiveness against state-of-the-art alternatives. In the second part we consider the Bayesian estimation of quantile-based distributions. We introduce a factor model with independent latent variables, which are distributed according to the fgld. Similar to the independent factor analysis model, this approach accommodates flexible factor distributions while using fewer parameters. The model is presented within a Bayesian framework, an MCMC algorithm for its estimation is developed, and its effectiveness is illustrated with data coming from the European Social Survey. The third part focuses on depth functions, which extend the concept of quantiles to multivariate data by imposing a center-outward ordering in the multivariate space. We investigate the recently introduced integrated rank-weighted (IRW) depth function, which is based on the distribution of random spherical projections of the multivariate data. This depth function proves to be computationally efficient and to increase its flexibility we propose different methods to explicitly model the projected univariate distributions. Its usefulness is shown in classification tasks: the maximum depth classifier based on the IRW depth is proven to be asymptotically optimal under certain conditions, and classifiers based on the IRW depth are shown to perform well in simulated and real data experiments.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The binding energy of nuclear matter including exchange and pionic effects is calculated in a quark-meson coupling model with massive constituent quarks. As in the case with elementary nucleons in QHD, exchange effects are repulsive. However, the coupling of the mesons directly to the quarks in the nucleons introduces a new effect on the exchange energies that provides an extra repulsive contribution to the binding energy. Pionic effects are not small. Implications of such effects on observables are discussed. © 1998 Published by Elsevier Science B.V. All rights reserved.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Atribution as a function of the time are analyzed and this study leads to a deeper knowledge of the microscopic processes involved in the magnetic relaxation

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Field observations of new particle formation and the subsequent particle growth are typically only possible at a fixed measurement location, and hence do not follow the temporal evolution of an air parcel in a Lagrangian sense. Standard analysis for determining formation and growth rates requires that the time-dependent formation rate and growth rate of the particles are spatially invariant; air parcel advection means that the observed temporal evolution of the particle size distribution at a fixed measurement location may not represent the true evolution if there are spatial variations in the formation and growth rates. Here we present a zero-dimensional aerosol box model coupled with one-dimensional atmospheric flow to describe the impact of advection on the evolution of simulated new particle formation events. Wind speed, particle formation rates and growth rates are input parameters that can vary as a function of time and location, using wind speed to connect location to time. The output simulates measurements at a fixed location; formation and growth rates of the particle mode can then be calculated from the simulated observations at a stationary point for different scenarios and be compared with the ‘true’ input parameters. Hence, we can investigate how spatial variations in the formation and growth rates of new particles would appear in observations of particle number size distributions at a fixed measurement site. We show that the particle size distribution and growth rate at a fixed location is dependent on the formation and growth parameters upwind, even if local conditions do not vary. We also show that different input parameters used may result in very similar simulated measurements. Erroneous interpretation of observations in terms of particle formation and growth rates, and the time span and areal extent of new particle formation, is possible if the spatial effects are not accounted for.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In this talk we report on recent progress in implementing exchange terms in the quark-meson coupling model. Exchange effects are related to the Pauli exclusion principle. We discuss exchange effects at the nucleon level and at the quark level. We also address the incorporation of chiral symmetry and Delta degrees of freedom in the model.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The mean field description of nuclear matter in the quark-meson coupling model is improved by the inclusion of exchange contributions (Fock terms). The inclusion of Fock terms allows us to explore the momentum dependence of meson-nucleon vertices and the role of pionic degrees of freedom in matter. It is found that the Fock terms maintain the previous predictions of the model for the in-medium properties of the nucleon and for the nuclear incompressibility. The Fock terms significantly increase the absolute values of the single-particle, four-component scalar and vector potentials, a feature that is relevant for the spin-orbit splitting in finite nuclei. © 1999 Elsevier Science B.V.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In questo lavoro di tesi è stato svolto uno studio analitico sul modello di Hubbard esteso unidimensionale al fine di osservare la presenza di eventuali risonanze che possano dare origine alla formazione di stati legati di due particelle. L'esistenza di uno stato legato stabile ha suscitato grande interesse negli ultimi anni, sia in ambito teorico che sperimentale, poichè è alla base di molti fenomeni che vengono osservati nei sistemi a molti corpi a basse temperature, come il BCS-BEC crossover. Pertanto si è ritenuto utile studiare il problema a due corpi nel modello di Hubbard esteso, che in generale non è integrabile. Il modello considerato contiene interazioni a primi e secondi vicini, in aggiunta all'interazione di contatto presente nel modello di Hubbard. Il problema è stato indagato analiticamente attraverso il Bethe ansatz, che consente di trovare tutti gli autovalori e le autofunzioni dell'Hamiltoniana. L'ansatz di Bethe sulla funzione d'onda è stato generalizzato per poter tener conto dei termini di interazione a più lungo raggio rispetto all'interazione di contatto. Si trova che, in questo modello, nel limite termodinamico, possono avvenire delle risonanze (o quasi-risonanze) in cui la lunghezza di scattering diverge, contrariamente a quanto avviene nel modello di Hubbard. Tale fenomeno si verifica quando il livello energetico discreto degli stati legati “tocca” la banda di scattering. Inoltre, con l'aggiunta di nuovi termini di interazione emergono nuovi stati legati. Nel caso in esame, si osservano due famiglie di stati legati, se lo spin totale delle due particelle è 1, e tre famiglie di stati legati, se lo spin totale è 0.