Self-dynamic structure factor of dense liquids: Theory and simulation

The self-intermediate dynamic structure factor Fs(k,t) of liquid lithium near the melting temperature is calculated by molecular dynamics. The results are compared with the predictions of several theoretical approaches, paying special attention to the Lovesey model and the Wahnstrm and Sjgren mode-coupling theory. To this end the results for the Fs(k,t) second memory function predicted by both models are compared with the ones calculated from the simulations.

Rapid cohort generation and analysis of disease spectrum of large animal model of cone dystrophy.

Large animal models are an important resource for the understanding of human disease and for evaluating the applicability of new therapies to human patients. For many diseases, such as cone dystrophy, research effort is hampered by the lack of such models. Lentiviral transgenesis is a methodology broadly applicable to animals from many different species. When conjugated to the expression of a dominant mutant protein, this technology offers an attractive approach to generate new large animal models in a heterogeneous background. We adopted this strategy to mimic the phenotype diversity encounter in humans and generate a cohort of pigs for cone dystrophy by expressing a dominant mutant allele of the guanylate cyclase 2D (GUCY2D) gene. Sixty percent of the piglets were transgenic, with mutant GUCY2D mRNA detected in the retina of all animals tested. Functional impairment of vision was observed among the transgenic pigs at 3 months of age, with a follow-up at 1 year indicating a subsequent slower progression of phenotype. Abnormal retina morphology, notably among the cone photoreceptor cell population, was observed exclusively amongst the transgenic animals. Of particular note, these transgenic animals were characterized by a range in the severity of the phenotype, reflecting the human clinical situation. We demonstrate that a transgenic approach using lentiviral vectors offers a powerful tool for large animal model development. Not only is the efficiency of transgenesis higher than conventional transgenic methodology but this technique also produces a heterogeneous cohort of transgenic animals that mimics the genetic variation encountered in human patients.

Remote Synchronization Reveals Network Symmetries and Functional Modules

We study a Kuramoto model in which the oscillators are associated with the nodes of a complex network and the interactions include a phase frustration, thus preventing full synchronization. The system organizes into a regime of remote synchronization where pairs of nodes with the same network symmetry are fully synchronized, despite their distance on the graph. We provide analytical arguments to explain this result, and we show how the frustration parameter affects the distribution of phases. An application to brain networks suggests that anatomical symmetry plays a role in neural synchronization by determining correlated functional modules across distant locations.

Financial crisis: theory and practice

In the last 50 years, we have had approximately 40 events with characteristics related to financial crisis. The most severe crisis was in 1929, when the financial markets plummet and the US gross domestic product decline in more than 30 percent. Recently some years ago, a new crisis developed in the United States, but instantly caused consequences and effects in the rest of the world.This new economic and financial crisis has increased the interest and motivation for the academic community, professors and researchers, to understand the causes and effects of the crisis, to learn from it. This is the one of the main reasons for the compilation of this book, which begins with a meeting of a group of IAFI researchers from the University of Barcelona, where researchers form Mexico and Spain, explain causes and consequences of the crisis of 2007.For that reason, we believed this set of chapters related to methodologies, applications and theories, would conveniently explained the characteristics and events of the past and future financial crisisThis book consists in 3 main sections, the first one called "State of the Art and current situation", the second named "Econometric applications to estimate crisis time periods" , and the third one "Solutions to diminish the effects of the crisis". The first section explains the current point of view of many research papers related to financial crisis, it has 2 chapters. In the first one, it describe and analyzes the models that historically have been used to explain financial crisis, furthermore, it proposes to used alternative methodologies such as Fuzzy Cognitive Maps. On the other hand , Chapter 2 , explains the characteristics and details of the 2007 crisis from the US perspective and its comparison to 1929 crisis, presenting some effects in Mexico and Latin America.The second section presents two econometric applications to estimate possible crisis periods. For this matter, Chapter 3, studies 3 Latin-American countries: Argentina, Brazil and Peru in the 1994 crisis and estimates the multifractal characteristics to identify financial and economic distress.Chapter 4 explains the crisis situations in Argentina (2001), Mexico (1994) and the recent one in the United States (2007) and its effects in other countries through a financial series methodology related to the stock market.The last section shows an alternative to prevent the effects of the crisis. The first chapter explains the financial stability effects through the financial system regulation and some globalization standards. Chapter 6, study the benefits of the Investor activism and a way to protect personal and national wealth to face the financial crisis risks.

Paralyzed neonatal larynx in adduction. Case series, systematic review and analysis.

OBJECTIVE: Bilateral vocal cord abductor paralysis (BVCAbP) is considered a rare cause of stridor in the newborn. The goal of this work is to present a case series and to review systematically the literature on bilateral vocal cord abductor paralysis in the newborn to better characterize the current knowledge on this entity. METHODS: We performed a systematic literature review with Medline (1950-2011). The authors screened all cases of BVCAbP reported and selected those affecting newborns. RESULTS: Out of the 129 articles screened, 16 were included. A total of 69 cases could be retrieved and analyzed. Associated co-morbidities were found in 54% of the patients, most notably malformative conditions (intracranial or other), or a positive perinatal history (trauma/asphyxia, prematurity). Tracheostomy placement was required in 59% of children, and of these 44% were successfully decannulated. In terms of functional outcome full recovery or improvement were seen in 61% of patients. Major underlying co-morbidities affected negatively the functional outcome (p=.004), but not the need for tracheostomy (p=.604) or the decannulation success rate (p=.063). CONCLUSION: BVCAbP in the newborn is a serious cause of airway obstruction. It can be seen either in a context of multisystem anomalies or as an isolated finding. Newborns with major co-morbidities affecting their normal development are more likely to have poor functional outcomes and to remain tracheostomy-dependant.

Staphylococcus lugdunensis infective endocarditis. Description of 10 cases and analysis of native valve, prosthetic valve and pacemaker lead endocarditis clinical profiles

bolism. Surgery was needed in 51% of cases and mortality was 42%. Prosthetic valve endocarditis (nine of 60, 13%) predominated in the aortic position and was associated with abscess formation, required surgery, and high mortality (78%). Pacemaker lead IE (seven of 69, 10%) is associated with a better prognosis when antibiotic treatment is combined with surgery. Conclusions:S lugdunensis IE is an uncommon cause of IE, involving mainly native left sided valves, and it is characterised by an aggressive clinical course. Mortality in left sided native valve IE is high but the prognosis has improved in recent years. Surgery has improved survival in left sided IE and, therefore, early surgery should always be considered. Prosthetic valve S lugdunensis IE carries an ominous prognosis.

Evidence for oxygen-island formation on Al(111): Cluster-model theory and x-ray photoelectron spectroscopy

The O 1s x-ray photoelectron spectroscopy spectrum for Al(111)/O at 300 K shows two components whose behavior as a function of time and variation of detection angle are consistent with either (a) a surface species represented by the higher binding-energy (BE) component and a subsurface species represented by the lower BE component, or (b) small close-packed oxygen islands with the interior atoms represented by the lower BE component and the perimeter atoms by the higher BE component. We have modeled both situations using ab initio Hartree-Fock wave functions for clusters of Al and O atoms. For an O atom in a threefold site, it was found that a below-surface position gave a higher O 1s BE than an above-surface position, incompatible with interpretation (a). This change in the O 1s BE could arise because the bond for O to Al may have a more covalent character when the O is below the surface than when it is above the surface. We present evidence consistent with this view. An O adatom island with all the O atoms in threefold sites gives calculated O 1s BE's which are significantly higher for the perimeter O atoms. Further, the results for an isolated O island without the Al substrate present also give higher BE¿s for the perimeter atoms. Both these results are consistent with interpretation (b). Published scanning-tunneling-microscopy data supports the suggestion that the chemisorbed state consists of small, close-packed islands, whereas the presence of two vibrational modes in high-resolution electron-energy-loss spectroscopy data has been interpreted as representing surface and subsurface oxygen atoms. In light of the present results, we suggest that a vibrational interpretation in terms of interior and perimeter adatoms should be considered.

Evidential relevance in scene to offender transfer cases: development and analysis of a likelihood ratio for offence level propositions

The present paper focuses on the analysis and discussion of a likelihood ratio (LR) development for propositions at a hierarchical level known in the context as 'offence level'. Existing literature on the topic has considered LR developments for so-called offender to scene transfer cases. These settings involve-in their simplest form-a single stain found on a crime scene, but with possible uncertainty about the degree to which that stain is relevant (i.e. that it has been left by the offender). Extensions to multiple stains or multiple offenders have also been reported. The purpose of this paper is to discuss a development of a LR for offence level propositions when case settings involve potential transfer in the opposite direction, i.e. victim/scene to offender transfer. This setting has previously not yet been considered. The rationale behind the proposed LR is illustrated through graphical probability models (i.e. Bayesian networks). The role of various uncertain parameters is investigated through sensitivity analyses as well as simulations.

Development of Performance Properties of Ternary Mixtures and Concrete Pavement Mixture Design and Analysis (MDA): Effect of Paste Quality on Fresh and Hardened Properties of Ternary Mixtures, TPF-5(117), 2012

The purpose of this study was to investigate the effect of cement paste quality on the concrete performance, particularly fresh properties, by changing the water-to-cementitious materials ratio (w/cm), type and dosage of supplementary cementitious materials (SCM), and airvoid system in binary and ternary mixtures. In this experimental program, a total matrix of 54 mixtures with w/cm of 0.40 and 0.45; target air content of 2%, 4%, and 8%; a fixed cementitious content of 600 pounds per cubic yard (pcy), and the incorporation of three types of SCMs at different dosages was prepared. The fine aggregate-to- total aggregate ratio was fixed at 0.42. Workability, rheology, air-void system, setting time, strength, Wenner Probe surface resistivity, and shrinkage were determined. The effects of paste variables on workability are more marked at the higher w/cm. The compressive strength is strongly influenced by the paste quality, dominated by w/cm and air content. Surface resistivity is improved by inclusion of Class F fly ash and slag cement, especially at later ages. Ternary mixtures performed in accordance with their ingredients. The data collected will be used to develop models that will be part of an innovative mix proportioning procedure.

Concrete Pavement Mixture Design and Analysis (MDA) Guide Specification for Highway Concrete Pavements: Commentary, TPF-5(205), 2012

This guide specification and commentary for concrete pavements presents current state-of-the art thinking with respect to materials and mixture selection, proportioning, and acceptance. This document takes into account the different environments, practices, and materials in use across the United States and allows optional inputs for local application. The following concrete pavement types are considered: jointed plain concrete pavement, the most commonly used pavement type and may be doweled or non-doweled at transverse joints; and continuously reinforced concrete pavement, typically constructed without any transverse joints, typically used for locations with high truck traffic loads and/or poor support conditions.

Concrete Pavement Mixture Design and Analysis (MDA) Guide Specification for Highway Concrete Pavements, TPF-5(205), 2012

A guide specification and commentary have been prepared that lay out current state-of-the art thinking with respect to materials and mixture selection, proportioning, and acceptance. These documents take into account the different environments, practices, and materials in use across the US and allow optional inputs for local application.

Concrete Pavement Mixture Design and Analysis (MDA): Effect of Aggregate Systems on Concrete Properties, TPF-5(205), 2012

For years, specifications have focused on the water to cement ratio (w/cm) and strength of concrete, despite the majority of the volume of a concrete mixture consisting of aggregate. An aggregate distribution of roughly 60% coarse aggregate and 40% fine aggregate, regardless of gradation and availability of aggregates, has been used as the norm for a concrete pavement mixture. Efforts to reduce the costs and improve sustainability of concrete mixtures have pushed owners to pay closer attention to mixtures with a well-graded aggregate particle distribution. In general, workability has many different variables that are independent of gradation, such as paste volume and viscosity, aggregate’s shape, and texture. A better understanding of how the properties of aggregates affect the workability of concrete is needed. The effects of aggregate characteristics on concrete properties, such as ability to be vibrated, strength, and resistivity, were investigated using mixtures in which the paste content and the w/cm were held constant. The results showed the different aggregate proportions, the maximum nominal aggregate sizes, and combinations of different aggregates all had an impact on the performance in the strength, slump, and box test.

Concrete Pavement Mixture Design and Analysis (MDA): Assessment of Air Void System Requirements for Durable Concrete, TPF-5(205), 2012

Concrete will suffer frost damage when saturated and subjected to freezing temperatures. Frost-durable concrete can be produced if a specialized surfactant, also known as an air-entraining admixture (AEA), is added during mixing to stabilize microscopic air voids. Small and well-dispersed air voids are critical to produce frost-resistant concrete. Work completed by Klieger in 1952 found the minimum volume of air required to consistently ensure frost durability in a concrete mixture subjected to rapid freezing and thawing cycles. He suggested that frost durability was provided if 18 percent air was created in the paste. This is the basis of current practice despite the tests being conducted on materials that are no longer available using tests that are different from those in use today. Based on the data presented, it was found that a minimum air content of 3.5 percent in the concrete and 11.0 percent in the paste should yield concrete durable in the ASTM C 666 with modern AEAs and low or no lignosulfonate water reducers (WRs). Limited data suggests that mixtures with a higher dosage of lignosulfonate will need about 1 percent more air in the concrete or 3 percent more air in the paste for the materials and procedures used. A spacing factor of 0.008 in. was still found to be necessary to provide frost durability for the mixtures investigated.