Eṭwas tzur einzichṭ fir doz izraelitiše publikum, in beṭref einer ... in Wien fon Aharon Pollok unlengsṭ eršinenen daiṭšen iberzeṭtzung fon Nevi'im rišonim

heroisgegeben fon Šemuel Deṭmold

Pasteurization of Apple Cider with UV Irradiation

In a period of increasing concern about food safety, food poisoning outbreaks where unpasterurized apple cider or apple juice was found contaminated with Escherichia coli 0157:H7 reinforces the need for using the best technologies in apple cider production. Most apple cider is sold as an unpasteurized raw product. Because of their acidity, it was believed that juice products do not usually contain microorganisms such as E. coli 0157:H7, Salmonella, and Crytosporidium. Yet all of these foodborne pathogens are capable of being transmitted in unpasteurized juices. It is known that these pathogens can survive for several weeks in a variety of acidic juices. Although heat pasteurization is probably the best method to eliminate these pathogens, it is not the most desirable method as it changes sensory properties and also is very costly for small to mid-sized apple cider processors. Pasteurization of apple cider with Ultraviolet Irradiation (UV) is a potential alternative to heat pasteurization. Germicidal W irradiation is effective in inactivating microorganisms without producing undesirable by-products and changing sensory properties. Unpasteurized raw apple cider from a small local processor was purchased for this study. The effects of physical parameters, exposure time and dosage on the W treatment efficacy were examined as well as the effects of the UV light on apple cider quality. W light with principal energy at a wavelength of 254.7 nm, was effective in reducing bacteria (E .coli, ATCC 25922) inoculated apple cider. The W dosage absorbed by the apple cider was mathematically calculated. A radiation dose of 8,777 μW-s/cm2 reduced bacteria an average of 2.20 logs and in multiple passes, the FDA mandated 5-log reduction was achieved. Sensory analysis showed there was no significant difference between the W treated and non-treated cider. Experiments with W treated apple cider indicated a significant (p < 0.01) extension of product shelf life through inhibition of yeast and mold growth. The extension of the researched performed is applicable to other fruit juice processing operations.

Representing Afghanistan: The United States and Democracy's Imposition

There is an ongoing mission in Afghanistan; a mission driven by external political forces. At its core this mission hopes to establish peace, to protect the populace, and to install democracy. Each of these goals has remained just that, a goal, for the past eight years as the American and international mission in Afghanistan has enjoyed varied levels of commitment. Currently, the stagnant progress in Afghanistan has led the international community to become increasingly concerned about the viability of a future Afghan state. Most of these questions take root in the question over whether or not an Afghan state can function without the auspices of international terrorism. Inevitably, the normative question of what exactly that government should be arises from this base concern. In formulating a response to this question, the consensus of western society has been to install representative democracy. This answer has been a recurring theme in the post Cold War era as states such as Bosnia and Somalia bear witness to the ill effects of external democratic imposition. I hypothesize that the current mold of externally driven state-building is unlikely to result in what western actors seek it to establish: representative democracy. By primarily examining the current situation in Afghanistan, I claim that external installation of representative democracy is modally flawed in that its process mandates choice. Representative democracy by definition constitutes a government reflective of its people, or electorate. Thus, freedom of choice is necessary for a functional representative democracy. From this, one can deduce that because an essential function of democracy is choice, its implementation lies with the presence of choice. State-building is an imposition that eliminates that necessary ingredient. The two stand as polar opposites that cannot effectively collaborate. Security, governing capacity, and development have all been targeted as measurements of success in Afghanistan. The three factors are generally seen as mutually constitutive; so improved security is seen as improving governing capacity. Thus, the recent resurgence of the Taliban in Afghanistan and a deteriorating security environment moving forward has demonstrated the inability of the Afghan government to govern. The primary reason for the Afghan government’s deficiencies is its lack of legitimacy among its constituency. Even the use of the term ‘constituency’ must be qualified because the Afghan government has often oscillated between serving the people within its territorial borders and the international community. The existence of the Afghan state is so dependent on foreign aid and intervention that it has lost policy-making and enforcing power. This is evident by the inability of Afghanistan to engage in basic sovereign state activities as maintaining a national budget, conducting elections, providing for its own national security, and deterring criminality. The Afghan state is nothing more than a shell of a government, and indicative of the failings that external state-building has with establishing democracy.

Comprehensive environmental study in high risk areas for cancer patients comparing air and water Aspergillus species samples

Background. Nosocomial invasive aspergillosis (a highly fatal disease) is an increasing problem for immunocompromised patients. Aspergillus spp. can be transmitted via air (most commonly) and by water. ^ The hypothesis for this prospective study was that there is an association between patient occupancy, housekeeping practices, patients, visitors, and Aspergillus spp. loading. Rooms were sampled as not terminally cleaned (dirty) and terminally cleaned (clean). The secondary hypothesis was that Aspergillus spp. positive samples collected from more than one sampling location within the same patient room represent the same isolate. ^ Methods. Between April and October 2004, 2873 environmental samples (713 air, 607 water, 1256 surface and 297 spore traps) were collected in and around 209 “clean” and “dirty” patient rooms in a large cancer center hospital. Water sources included aerosolized water from patient room showerheads, sinks, drains, and toilets. Bioaerosol samples were from the patient room and from the running shower, flushing toilet, and outside the building. The surface samples included sink and shower drains, showerheads, and air grills. Aspergillus spp. positive samples were also sent for PCR, molecular typing (n = 89). ^ Results. All water samples were negative for Aspergillus spp. There were a total of 130 positive culturable samples (5.1%). The predominant species found was Aspergillus niger. Of the positive culturable samples, 106 (14.9%) were air and 24 (3.8%) were surface. There were 147 spore trap samples, and 49.5% were positive for Aspergillus/Penicillum spp. Of the culturable positive samples sent for PCR, 16 were indistinguishable matches. There was no significant relationship between air and water samples and positive samples from the same room. ^ Conclusion. Primarily patients, visitors and staff bring the Aspergillus spp. into the hospital. The high number of A. niger samples suggests the spores are entering the hospital from outdoors. Eliminating the materials brought to the patient floors from the outside, requiring employees, staff, and visitors to wear cover up over their street clothes, and improved cleaning procedures could further reduce positive samples. Mold strains change frequently; it is probably more significant to understand pathogenicity of viable spores than to commit resources on molecular strain testing on environmental samples alone. ^

The characterization of residential fungal spores and the relationship with housing characteristics in the Houston area

A number of indoor environmental factors, including bioaerosol or aeroallergen concentrations have been identified as exacerbators for asthma and allergenic conditions of the respiratory system. People generally spend 90% to 95% of their time indoors. Therefore, understanding the environmental factors that affect the presence of aeroallergens indoors as well as outdoors is important in determining their health impact, and in identifying potential intervention methods. This study aimed to assess the relationship between indoor airborne fungal spore concentrations and indoor surface mold levels, indoor versus outdoor airborne fungal spore concentrations and the effect of previous as well as current water intrusion. Also, the association between airborne concentration of indoor fungal spores and surface mold levels and the age of the housing structure were examined. Further, the correlation between indoor concentrations of certain species was determined as well. ^ Air and surface fungal measurements and related information were obtained from a Houston-area data set compiled from visits to homes filing insurance claims. During the sampling visit these complaint homes exhibited either visible mold or a combination of visible mold and water intrusion problems. These data were examined to assess the relationships between the independent and dependent variables using simple linear regression analysis, and independent t-tests. To examine the correlation between indoor concentrations of certain species, Spearman correlation coefficients were used. ^ There were 126 houses sampled, with spring, n=43 (34.1%), and winter, n=42 (33.3%), representing the seasons with the most samples. The summer sample illustrated the highest geometric mean concentration of fungal spores, GM=5,816.5 relative to winter, fall and spring (GM=1,743.4, GM=3,683.5 and GM=2,507.4, respectively). In all seasons, greater concentrations of fungal spores were observed during the cloudy weather conditions. ^ The results indicated no statistically significant association between outdoor total airborne fungal spore concentration and total living room airborne fungal spore concentration (β = 0.095, p = 0.491). Second, living room surface mold levels were not associated with living room airborne fungal spore concentration, (β= 0.011, p = 0.669). Third, houses with and without previous water intrusion did not differ significantly with respect to either living room (t(111) = 0.710, p = 0.528) or bedroom (t(111) =1.673, p = 0.162) airborne fungal spore concentrations. Likewise houses with and without current water intrusion did not differ significantly with respect to living room (t(109)=0.716, p = 0.476) or bedroom (t(109) = 1.035, p = 0.304) airborne fungal spore concentration. Fourth, houses with and without current water intrusion did not differ significantly with respect to living room (χ 2 (5) = 5.61, p = 0.346), or bedroom (χ 2 (5) = 1.80, p = 0.875) surface mold levels. Fifth, the age of the house structure did not predict living room (β = 0.023, p = 0.102) and bedroom (β = 0.023, p = 0.065) surface mold levels nor living room (β = 0.002, p = 0.131) and bedroom (β = 0.001, p = 0.650) fungal spore airborne concentration. Sixth, in houses with visually observed mold growth there was statistically significant differences between the mean living room concentrations and mean outdoor concentrations for Cladosporium (t (107) = 11.73, p < 0.0001), Stachybotrys (t (106)=2.288, p = 0.024, and Nigrosporia (t (102) = 2.267, p = 0.025). Finally, there was a significant correlation between several living room fungal species pairs, namely, Cladosporium and Stachybotrys (r = 0.373, p <0.01, n=65), Curvularia and Aspergillus/Penicillium (r = 0.205, p < 0.05, n= 111)), Curvularia and Stachybotrys (r = 0.205, p < 0.05, n=111), Nigrospora and Chaetomium (r = 0.254, p < 0.01, n=105) and Stachybotrys and Nigrospora (r = 0.269, p < 0.01, n=105). ^ This study has demonstrated several positive findings, i.e., significant pairwise correlations of concentrations of several fungal species in living room air, and significant differences between indoor and outdoor concentrations of three fungal species in homes with visible mold. No association was observed between indoor and outdoor fungal spore concentrations. Neither living room nor bedroom airborne spore concentrations and surface mold levels were related to the age of the house or to water intrusion, either previous or current. Therefore, these findings suggest the need for evaluating additional parameters, as well as combinations of factors such as humidity, temperature, age of structure, ventilation, and room size to better understand the determinants of airborne fungal spore concentrations and surface mold levels in homes. ^

Factors affecting ozone related asthma responses among middle school students with asthma

Outdoor environmental risk factors for asthma have been extensively researched, even though the majority of a person's daily activity occurs indoors. There is limited evidence linking personal exposure concentrations of ozone, pollen, mold, temperature, and humidity to childhood asthma. ^ The current study consisted of a secondary, more complex analysis of the data from the Houston Air Toxics and Asthma in Children (ATAC) Study to further investigate the association of personal ozone exposure on asthma outcome variability among middle school children with asthma. The ATAC Study primarily investigated the association between selected oxygenated air toxics and indicators of asthma variability (PEFR, FEV1, asthma symptoms, and rescue medication usage) among 30 labile and persistent Houston middle-school children with diagnosed asthma. This panel study used a repeated measurements design of four separate 10-day sampling periods that extended over a 20 month period. The secondary analysis included aggregate regression models that were constructed with two different estimates of ozone exposure (daily maximum hourly outdoor concentration and daily maximum hourly personal exposure), with three different estimates of personal environmental temperature and humidity exposures (daily average, intraday difference, and interday difference), and for thee different time periods [same day of exposure (lag 0), one day after initial exposure (lag 1), and two days after initial exposure (lag 2)]. ^ Overall, the models using daily maximum hourly personal ozone exposures in combination with intraday and interday personal temperature and humidity differences produced more significant plausible associations than models using daily maximum hourly personal ozone exposures with personal average temperature and humidity exposures. Significant associations were identified between daily maximum hourly personal ozone exposure and clinical indicators of asthma variability. The increasing effect on rescue medication usage from daily maximum hourly personal ozone exposure were identified as soon as the same day of exposure (lag 0; p=0.0072), and the same effects were delayed until the second next day (lag 2; p= 0.0026). The increasing effect on asthma symptoms were identified on the second next day after initial exposure (lag 2; p= 0.0024). There was a consistent inverse relationship between personal relative humidity exposure and indicators of asthma variability. Decreasing effects on daily FEV1 variability from personal relative humidity exposure were identified on the same day of exposure (lag 0; p= 0.034), increasing effects on morning PEFR were identified on the next day after initial exposure (lag 1; p= 0.0001), and decreasing effects on overnight PEFR variability were identified on the second next day after the initial exposure (lag 2; p= 0.007). With the conclusion of this research, there are opportunities for future similar studies in the preventive management of asthma in children living in high-ozone areas.^

Monitoring of industrial exposure for chloracne

This study (1) established comedogenicity dose response curves for the pure compounds of 3,3$\sp\prime$,4,4$\sp\prime$-tetrachloroazobenzene (TCAB) and 3,3$\sp\prime$,4,4$\sp\prime$-tetrachloroazoxybenzene (TCAOB) individually and as a couple-compound using a rabbit ear model; (2) used a rabbit ear model to establish comedogenicity potential for TCAB and TCAOB as they existed in a given industrial herbicide manufacture process; (3) evaluated actual environmental contamination in a herbicide industrial setting by air monitoring and wipe sampling; (4) biologically monitored potentially exposed workers for alterations in follicular orifice size as an index of actual exposure to chloracnegenic compounds; and (5) biologically monitored potentially exposed workers for changes in weight, cholesterol, triglycerides and blood sugar.^ A silastic monomer mold (an objective measure) was used to measure change in follicular orifice size over time. This required taking impressions of (1) skin of the forehead and right and left malar crescents of workers and (2) the skin of the external ear of the rabbit. Molds were stained using a solution of hematoxylin and digitized using a Nikon UFX microscope (magnification 300 X), a drawing tube and a digitizing tablet attached to an IBM Personal Computer. Comedogenicity assays were used to establish dose-response curves for TCAB, TCAOB and the couple-compound TCAB + TCAOB.^ No evidence of chloracne or toxicity was observed in any of the workers. Nor, was there a statistically significant increase in size of follicular orifice means measured over time. This was attributed to extensive personal and environmental hygiene programs along with teaching the workers about chloracne, its cause and its prevention. These programs may have been the greatest factor in preventing the development of chloracne in this group of workers. Monitoring of the plant environment showed relatively high concentrations of the couple-compound (TCAB + TCAOB). Comedogenicity assays showed a linear dose-response relationship over time for TCAB, TCAOB and the couple-compound. An antagonistic action was found for the TCAB/TCAOB of the couple-compound; such action may provide some protection to workers in this type of setting. It is speculated that the observed antagonistic action may be due to the difference in binding affinities of TCAB/TCAOB for receptor sites. ^

AN ASSESSMENT OF AFLATOXIN B1, AND OTHER SELECTED VARIABLES, IN A RURAL ENVIRONMENT AND ASSOCIATED CANCER RISK (TEXAS)

A study to assess possible exposure to carcinogenic metabolites (aflatoxins) from a mold Aspergillus flavus has been made in a rice producing area of Brazoria County, Texas. One hundred samples of unmilled rice were analyzed by thin-layer chromatography (TLC) for the amount of aflatoxin produced by the mold during rice growth and storage. Two well water samples and two rice elevator dust samples were also checked for possible aflatoxin content. The mortality rates from gastrointestinal and urinary tract cancers in the rice-growing part of the county were compared with mortality rates in the nonrice-producing areas of the same county.^ This study was an outgrowth of an earlier investigation by Cech and co-workers in Brazoria County which focused on environmental differences, specifically on the quality of drinking water in the former residences of decedents from primary liver cancer. It also compared subjects who died from other causes. The author of this dissertation participated in this phase of the overall investigation by performing some of the chemical analyses and by preparing synographic maps of water quality, and thus, part of those results from the early phase is also included in this manuscript.^ No aflatoxin was detected by TLC methods. However, when extracts of rice dust were checked for mutagenesis by the Ames Salmonella-microsome assay as a supplement to the TLC analysis, the result suggested that these dusts might have contained mutagenic material. The age-adjusted mortality rates in the rice-growing area were higher than those in the comparison area for both male and female gastrointestinal tract cancer and for male urinary tract cancer, but the differences were not statistically significant. ^

Evaluation of elevator shafts as a pathway for fungal spores and particles to enter a hospital housing immuno-compromised patients

Background. It is estimated that hospitals spend between 28 and 33 billion dollars per year as a result of hospital-acquired infections. (Scott, 2009) The costs continue to rise despite the guidance and controls provided by hospital infection control staff to reduce patient exposures to fungal spores and other infectious agents. With all processes and controls in place, the vented elevator shaft represents an unprotected opening from the top of the building to the lower floors. The hypothesis for this prospective study is that there is a positive correlation between the number of Penicillium/Aspergillus-like spores, Cladosporium, ascospores, basidiospores in spores/m3 as individual spore categories found in the hoistway vent of an elevator shaft and the levels of the same spores, sampled near-simultaneously in the outdoor intake of the elevator shaft. Specific aims of this study include determining if external Penicillium/Aspergillus-like spores are entering the healthcare facility via the elevator shaft and hoistway vents. Additional aims include determining levels of Penicillium/Aspergillus-like spores outdoors, in the elevator shafts, and indoors in areas possibly affected by elevator shaft air; and, finally, to evaluate whether any effect is observed due to the installation of a hoistway vent damper, installed serendipitously during this study. ^ Methods. Between April 2010 and September 2010, a total of 3,521 air samples were collected, including 363 spore trap samples analyzed microscopically for seven spore types, and polymerase chain reaction analyses on 254 air samples. 2178 particle count measurements, 363 temperature readings and 363 relative humidity readings were also obtained from 7 different locations potentially related to the path of air travel inside and near a centrally-located and representative elevator shaft. ^ Results. Mean Penicillium/Aspergillus-like spore values were higher outside the building (530 spores/m3 of air) than inside the hoistway (22.8 spores/m3) during the six month study. Mean values inside the hospital were lower than outside throughout the study, ranging from 15 to 73 spores/m3 of air. Mean Penicillium/Aspergillus-like spore counts inside the hoistway decreased from 40.1 spores/m3 of air to 9 spores/m3 of air following the installation of a back draft damper between the outside air and the elevator shaft. Comparison of samples collected outside the building and inside the hoistway vent prior to installing the damper indicated a strong positive correlation (Spearman's Rho=0.8008, p=0.0001). The similar comparison following the damper installation indicated a moderate non-significant inverse correlation (Spearman's rho = −0.2795, p=0.1347). ^ Conclusion. Elevator shafts are one pathway for mold spores to enter a healthcare facility. A significant correlation was detected between spores and particle counts inside the hoistway and outside prior to changes in the ventilation system. The insertion of the back draft damper appeared to lower the spore counts inside the hoistway and inside the building. The mold spore counts in air outside the study building were higher in the period following the damper installation while the levels inside the hoistway and hospital decreased. Cladosporium and Penicillium/Aspergillus -like spores provided a method for evaluating indoor air quality as a natural tracer from outside the building to inside the building. Ascospores and basidiospores were not a valuable tracer due to low levels of detection during this study. ^ Installation of a back draft damper provides additional protection for the indoor environment of a hospital or healthcare facility, including in particular patients who may be immunocompromised. Current design standards and references do not require the installation of a back draft damper, but evaluation of adding language to relevant building codes should be considered. The data indicate a reduction in levels of Penicillium/Aspergillus -like spores, particle counts and a reduction in relative humidity inside of the elevator shaft after damper installation.^

Effect of Certified Organic Products on Soybean Aphid

The soybean aphid (Aphis glycines), native to China, has become the most economically damaging insect in soybeans in northeast Iowa. Soybean aphid may have up to 18 generations per year, beginning with overwintering eggs on the alternate host buckthorn. In spring, winged aphids migrate from buckthorn to nearby emerged soybeans. Generations advance in these fields, and then another winged migration occurs in summer spreading from these fields to others. A third migration occurs in fall with aphids moving back to buckthorn. Depending on the season, soybean proximity to buckthorn, and soybean aphid migration patterns, populations of aphids tend to peak in soybeans anywhere from late July to early September. With higher aphid populations, the production of honeydew (the excrement of the aphid) and the resulting black fungus that grows on it (sooty mold) may become apparent. Aphid feeding may cause stunted plants, reduced pods and seeds, and may also transmit viruses that could cause mottling and distortion of leaves, reduced seed set, and discolored seeds.

Método de evaluación a campo de la resistencia al moho azul en clones de ajo tipo colorado

Con el objeto de ajustar un método de evaluación a campo para facilitar la selección de clones de ajo (Allium sativum L.) con resistencia a Penicillium allii, se realizó un ensayo replicado en el cual se midió la respuesta de tres clones experimentales a la infección, en dos épocas de plantación. Los tratamientos incluyeron combinaciones de presencia o ausencia de: a) desinfección de la "semilla", b) heridas artificiales en los bulbillos, c) inoculación artificial. Los bulbillos con la hoja envolvente se desinfectaron con una solución diluida de hipoclorito de sodio. La inoculación se realizó mediante la inmersión en una solución de 106 esporas•ml-1. Las heridas se realizaron con una lanceta (blood lancet). Los bulbillos se incubaron en cámara húmeda durante 24 horas a 20 °C, antes de plantación. Las variables respuestas computadas fueron las siguientes: número de plantas muertas, y vivas con síntomas y sin síntomas, a los 152 días de plantación en la primera época y 118 días en la segunda; número de bulbos por calibres y rendimiento a cosecha. La información obtenida se analizó a través de correspondencia simple, diferencia de proporciones y análisis paramétricos. Se detectaron mayores diferencias entre los tratamientos en la tasa de sobrevivencia y en la proporción de calibres comerciales en la época tardía. No se observaron diferencias (p < 0,05) del rendimiento en la plantación temprana. La herida fue determinante en el ingreso del patógeno. Los tratamientos quedaron limitados a un testigo: desinfectado, no inoculado y sin herida, y a un tratamiento: desinfectado, con inoculación y herida. Con respecto a la época, resultó conveniente la evaluación en plantaciones tardías porque se expresan mejor las diferencias entre los tratamientos.

Modelo para la toma de decisiones sobre los contenidos curriculares de la Organización del Conocimiento en programas académicos de Bibliotecología, Documentación o Ciencia de la Información

Se presenta un modelo para decidir los contenidos curriculares de la Organización del Conocimiento en carreras de Bibliotecología, Documentación y Ciencia de la Información, orientado principalmente al Mercosur. Para el diseño del modelo se tuvieron en cuenta los contenidos mínimos recomendados por los encuentros de directores y docentes de escuelas de Bibliotecología del Mercosur, la llamada corriente de ISKO y los aportes de distintos autores relacionados con ambas fuentes. El modelo consta de tres categorías primarias: fundamentos, aplicaciones y ética de la Organización del Conocimiento. Los fundamentos se consideran desde un abordaje multidimensional. Las aplicaciones se dividen en tres categorías primarias: a) construcción de sistemas de organización del conocimiento, b) descripción de contenido y c) gestión de calidad de la Organización del Conocimiento. La ética también se divide en tres categorías secundarias: compromiso ético, valores éticos y problemas éticos. El modelo debe entenderse como un molde vacío que necesita llenarse con los contenidos que decida cada carrera o cada espacio curricular y se espera que facilite la evaluación, actualización y comparación de esos contenidos. Tiene la limitación de basarse en las recomendaciones del Mercosur y la corriente de ISKO, que no son aceptadas por todos los especialistas

Modelo para la toma de decisiones sobre los contenidos curriculares de la Organización del Conocimiento en programas académicos de Bibliotecología, Documentación o Ciencia de la Información

Se presenta un modelo para decidir los contenidos curriculares de la Organización del Conocimiento en carreras de Bibliotecología, Documentación y Ciencia de la Información, orientado principalmente al Mercosur. Para el diseño del modelo se tuvieron en cuenta los contenidos mínimos recomendados por los encuentros de directores y docentes de escuelas de Bibliotecología del Mercosur, la llamada corriente de ISKO y los aportes de distintos autores relacionados con ambas fuentes. El modelo consta de tres categorías primarias: fundamentos, aplicaciones y ética de la Organización del Conocimiento. Los fundamentos se consideran desde un abordaje multidimensional. Las aplicaciones se dividen en tres categorías primarias: a) construcción de sistemas de organización del conocimiento, b) descripción de contenido y c) gestión de calidad de la Organización del Conocimiento. La ética también se divide en tres categorías secundarias: compromiso ético, valores éticos y problemas éticos. El modelo debe entenderse como un molde vacío que necesita llenarse con los contenidos que decida cada carrera o cada espacio curricular y se espera que facilite la evaluación, actualización y comparación de esos contenidos. Tiene la limitación de basarse en las recomendaciones del Mercosur y la corriente de ISKO, que no son aceptadas por todos los especialistas

Modelo para la toma de decisiones sobre los contenidos curriculares de la Organización del Conocimiento en programas académicos de Bibliotecología, Documentación o Ciencia de la Información

Se presenta un modelo para decidir los contenidos curriculares de la Organización del Conocimiento en carreras de Bibliotecología, Documentación y Ciencia de la Información, orientado principalmente al Mercosur. Para el diseño del modelo se tuvieron en cuenta los contenidos mínimos recomendados por los encuentros de directores y docentes de escuelas de Bibliotecología del Mercosur, la llamada corriente de ISKO y los aportes de distintos autores relacionados con ambas fuentes. El modelo consta de tres categorías primarias: fundamentos, aplicaciones y ética de la Organización del Conocimiento. Los fundamentos se consideran desde un abordaje multidimensional. Las aplicaciones se dividen en tres categorías primarias: a) construcción de sistemas de organización del conocimiento, b) descripción de contenido y c) gestión de calidad de la Organización del Conocimiento. La ética también se divide en tres categorías secundarias: compromiso ético, valores éticos y problemas éticos. El modelo debe entenderse como un molde vacío que necesita llenarse con los contenidos que decida cada carrera o cada espacio curricular y se espera que facilite la evaluación, actualización y comparación de esos contenidos. Tiene la limitación de basarse en las recomendaciones del Mercosur y la corriente de ISKO, que no son aceptadas por todos los especialistas

Supplemental Data - Bioremediation of polluted air from an industrial plant using rotating biofilter reactor-based technology

Two microbial isolates (HDB, Hydrogen-Degrading Bacteria) obtained from industrial wastewater were inoculated into the rotating biofilter reactor 'Biowheel 2.0' and tested for the ability to purify gaseous flows containing benzene and non-methane volatile organic compounds (NMVOCs) released at an industrial plant. Different classes of gaseous flow were tested, namely 'cold box', 'in shell', and 'mix', all of them associated with the industrial process of 'mold-casting'. A significant increase in Removal Efficiency (RE) was recorded for benzene and NMVOCs in the inoculated 'Biowheel 2.0' biofilter, compared to uninoculated control. For each type of gaseous flow, odor impact was evaluated in the inlet and outlet flows at the industrial plant, using the test panel method and electronic nose technology. A significant drop in the amount of Olfactometric Units (O.U.) m-3 occurred in the gaseous flows treated with the bacterial consortium. The reported data demonstrate the ability of the consortium to degrade hydrocarbons, revealing its potential for bioremediation of polluted air emissions occurring at industrial plants.