A Mineralogical Study of a Dravitic Tourmaline from the Grenville Province

Tourmaline from a gem-quality deposit in the Grenville province has been studied with X-ray diffraction, visible-near infrared spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, electron microprobe and optical measurements. The tourmaline is found within tremolite-rich calc-silicate pods hosted in marble of the Central Metasedimentary Belt. The crystals are greenish-greyish-brown and have yielded facetable material up to 2.09 carats in size. Using the classification of Henry et al. 2011 the tourmaline is classified as a dravite, with a representative formula shown to be (Na0.73Ca0.2380.032)(Mg2+2.913Fe2+0.057Ti4+0.030) (Al3+5.787Fe3+0.017Mg2+0.14)(Si6.013O18)(BO3)3(OH)3((OH,O)0.907F0.093). Rietveld analysis of powder diffraction data gives a = 15.9436(8) Å, c = 7.2126(7) Å and a unit cell volume of 1587.8 Å3. A polished thin section was cut perpendicular to the c-axis of one tourmaline crystal, which showed zoning from a dark brown core into a lighter rim into a thin darker rim and back into lighter zonation. Through the geochemical data, three key stages of crystal growth can be seen within this thin section. The first is the core stage which occurs from the dark core to the first colourless zone; the second is from this colourless zone increasing in brown colour to the outer limit before a sudden absence of colour is noted; the third is a sharp change from the end of the second and is entirely colourless. These events are the result of metamorphism and hydrothermal fluids resulting from nearby felsic intrusive plutons. Scanning electron microscope, and electron microprobe traverses across this cross-section revealed that the green colour is the result of iron present throughout the system while the brown colour is correlated with titanium content. Crystal inclusions in the tourmaline of chlorapatite, and zircon were identified by petrographic analysis and confirmed using scanning electron microscope data and occur within the third stage of formation.

Évaluation de la modélisation de la taille de grain de neige du modèle multi-couches thermodynamique SNOWPACK: implication dans l'évaluation des risques d'avalanches

Résumé: L’Institut pour l'étude de la neige et des avalanches en Suisse (SLF) a développé SNOWPACK, un modèle thermodynamique multi-couches de neige permettant de simuler les propriétés géophysiques du manteau neigeux (densité, température, taille de grain, teneur en eau, etc.) à partir desquelles un indice de stabilité est calculé. Il a été démontré qu’un ajustement de la microstructure serait nécessaire pour une implantation au Canada. L'objectif principal de la présente étude est de permettre au modèle SNOWPACK de modéliser de manière plus réaliste la taille de grain de neige et ainsi obtenir une prédiction plus précise de la stabilité du manteau neigeux à l’aide de l’indice basé sur la taille de grain, le Structural Stability Index (SSI). Pour ce faire, l’erreur modélisée (biais) par le modèle a été analysée à l’aide de données précises sur le terrain de la taille de grain à l’aide de l’instrument IRIS (InfraRed Integrated Sphere). Les données ont été recueillies durant l’hiver 2014 à deux sites différents au Canada : parc National des Glaciers, en Colombie-Britannique ainsi qu’au parc National de Jasper. Le site de Fidelity était généralement soumis à un métamorphisme à l'équilibre tandis que celui de Jasper à un métamorphisme cinétique plus prononcé. Sur chacun des sites, la stratigraphie des profils de densités ainsi des profils de taille de grain (IRIS) ont été complétés. Les profils de Fidelity ont été complétés avec des mesures de micropénétromètre (SMP). L’analyse des profils de densité a démontré une bonne concordance avec les densités modélisées (R[indice supérieur 2]=0.76) et donc la résistance simulée pour le SSI a été jugée adéquate. Les couches d’instabilités prédites par SNOWPACK ont été identifiées à l’aide de la variation de la résistance dans les mesures de SMP. L’analyse de la taille de grain optique a révélé une surestimation systématique du modèle ce qui est en accord avec la littérature. L’erreur de taille de grain optique dans un environnement à l’équilibre était assez constante tandis que l’erreur en milieux cinétique était plus variable. Finalement, une approche orientée sur le type de climat représenterait le meilleur moyen pour effectuer une correction de la taille de grain pour une évaluation de la stabilité au Canada.

The multistage crystallization of zircon in calc-alkaline granitoids : U-Pb age constraints on the timing of Variscan tectonic activity in SW Iberia

CL imaging and U–Th–Pb data for a population of zircons from two of the Évora Massif granitoids (Ossa-Morena Zone, SW Iberia) show that both calc-alkaline granitoids have zircon populations dominated by grains with cores and rims either showing or not showing differences in Th/U ratio, and having ages in the range ca. 350–335 Ma (Early Carboniferous). Multistage crystallization of zircon is revealed in two main growth stages (ca. 344–342 Ma and ca. 336–335 Ma), well represented by morphologically complex zircons with cores and rims with different ages and different Th/U ratios that can be explained by: (1) crystallization from melts with different compositions (felsic peraluminous to felsic-intermediate metaluminous; 0.001 Th/U ratio < 0.5) and (2) transient temperature fluctuations in a system where anatectic felsic melts periodically underwent injection of more mafic magmas at higher temperatures. The two studied calc-alkaline granitoids do not include inherited zircons (pre-Carboniferous), probably because they were formed at the highest grade of metamorphism (T 837 °C; granulite facies) and/or because they were derived from inheritance-poor felsic and mafic rocks from a previous cycle, as suggested by the internal structures of zircon cores. These Variscan magmatic rocks with crystallization ages estimated at ca. 336–335 Ma are spatially and temporally related to high-temperature metamorphism, anatexis, processes of interaction between crustal- and mantle-derived magmas and intra-orogenic extension that acted in SW Iberia during the Early Carboniferous.

Contribuição para o conhecimento da geologia do Grupo das Beiras (CXG) na região do Caramulo-Buçaco, Portugal Central

O presente trabalho ocupa-se do estudo do Complexo Xisto-Grauváquico ante-ordovícico (Grupo das Beiras) na região do Caramulo-Buçaco (centro de Portugal). Em termos geológicos, a área estudada pertence à Zona Centro Ibérica e encontra-se limitada a N pelo granito do Caramulo, a S pela bacia meso-cenozóica de Arganil, a W pelo sinclinal paleozóico do Buçaco e pela bacia meso-cenozóica ocidental portuguesa e a E pelo sinclinal paleozóico de Arganil e pelo plutonito granítico de Tábua-Santa Comba Dão; no seio da área estudada encontra-se a bacia meso-cenozóica de Mortágua. Com base nas características litológicas e estruturais distinguem-se no Complexo Xisto Grauváquico 4 grandes conjuntos litológicos concordantes entre si, designados de Unidades I, II, III e IV, que se desenvolvem da base para o topo de N para S. A Unidade I situa-se a N da região. O seu limite inferior é desconhecido, e o superior posiciona-se no último conjunto arenoso com potência decamétrica. É constituída por xistos cinzentos e negros com intercalações de arenitos de espessura não superior a 100 metros e de extensão lateral quilométrica. Apresenta uma espessura mínima de 1000 m. A Unidade II apresenta consideravelmente menor proporção de material arenoso intercalado entre os pelitos comparativamente à unidade inferior. É caracterizada por apresentar um predomínio de material silto-argiloso e escassos níveis arenosos com potência não superior à dezena de metros e escassa continuidade lateral. Cartograficamente esta unidade constitui uma franja alargada de orientação próxima a E-W. Apresenta uma espessura aproximada de 1500 m. A Unidade III é caracterizada pela presença de conjuntos arenosos com extensão lateral quilométrica e espessura de várias dezenas de metros, separados por material silto-argiloso. Os limites inferior e superior estão situados respectivamente abaixo e acima dos principais conjuntos arenosos. Esta unidade apresenta uma espessura máxima estimada na ordem dos 2000 m. A Unidade IV, que é a unidade superior, apresenta um predomínio pelítico, com escassas intercalações de conjuntos arenosos. O seu limite inferior encontra-se no topo do último conjunto arenoso da Unidade III. Apresenta uma espessura mínima de 500 m. As características sedimentológicas das 4 unidades indicam uma sedimentação num ambiente de plataforma externa siliciclástica aberta, com a construção de barras e por vezes sujeita à acção de tempestades, com sucessivos períodos de superficialização e profundização numa bacia de sedimentação bastante subsidente. Em termos estruturais, para além duma deformação pré-ordovícica, que é comprovada pelo forte mergulho e dispersão da orientação dos eixos da 1ª fase varisca e da lineação de intersecção L1, a área estudada foi principalmente afectada pela Orogenia Varisca. A 1ª fase de deformação varisca (F1) gerou dobras com superfícies axiais e xistosidade associada (S1) de direcção WNW-ESE, e forte pendor para NNE. Estas dobras D1 apresentam comprimentos de onda que nunca chegam a ser quilométricos, desenvolvendo-se um grande flanco inverso denunciando a presença de uma antiforma para NNE e uma sinforma para SSW. A 2ª fase de deformação varisca (F2) actuou na parte nordeste da área estudada e é caracterizada por ter gerado dobras de comprimento de onda quilométrico, com planos axiais e xistosidade associada S2 de direcção NW-SE, subverticais ou a pender fortemente para NE. Embora com alguma dispersão, as lineações de intersecção L2 e os eixos das dobras D2 apresentam maioritariamente forte pendor para E. A direcção e tipos de estruturas da F2 sugerem uma correlação com a terceira fase definida em vários pontos da Zona Centro Ibérica e estreitamente relacionada com as intrusões graníticas. Do ponto de vista petrológico, distinguem-se várias rochas sedimentares (pelitos e arenitos) todas elas sujeitas a metamorfismo que não ultrapassa a fácies dos xistos verdes. Dentro das rochas sedimentares mais grosseiras, há a destacar a presença de arenitos vulcânicos cuja composição denuncia, não muito afastados da bacia sedimentar, a presença de aparelhos vulcânicos que estariam em actividade durante a sedimentação. Foram analisadas isotopicamente 27 amostras de metapelitos colhidas em 5 locais diferentes de forma a abranger quase toda a área estudada. Os dados isotópicos de quatro destes locais de amostragem forneceram isócronas Rb-Sr, em rocha total, com valores da ordem dos 400-440 Ma. O granito do Caramulo, datado pela isócrona Rb-Sr em amostras de rocha total, forneceu uma idade de 326±12Ma. As idades modelo Sm-Nd (manto empobrecido) de 5 amostras de metapelitos estão compreendidas entre 1.35 e 1.25 Ga. Este período de tempo pode ser considerado como correspondendo à época de diferenciação mantélica da crusta que deu lugar à maioria das áreas fonte dos metapelitos.

Differences in grain growth of calcite: a field-based modeling approach

Normal grain growth of calcite was investigated by combining grain size analysis of calcite across the contact aureole of the Adamello pluton, and grain growth modeling based on a thermal model of the surroundings of the pluton. In an unbiased model system, i.e., location dependent variations in temperature-time path, 2/3 and 1/3 of grain growth occurs during pro- and retrograde metamorphism at all locations, respectively. In contrast to this idealized situation, in the field example three groups can be distinguished, which are characterized by variations in their grain size versus temperature relationships: Group I occurs at low temperatures and the grain size remains constant because nano-scale second phase particles of organic origin inhibit grain growth in the calcite aggregates under these conditions. In the presence of an aqueous fluid, these second phases decay at a temperature of about 350 °C enabling the onset of grain growth in calcite. In the following growth period, fluid-enhanced group II and slower group III growth occurs. For group II a continuous and intense grain size increase with T is typical while the grain growth decreases with T for group III. None of the observed trends correlate with experimentally based grain growth kinetics, probably due to differences between nature and experiment which have not yet been investigated (e.g., porosity, second phases). Therefore, grain growth modeling was used to iteratively improve the correlation between measured and modeled grain sizes by optimizing activation energy (Q), pre-exponential factor (k0) and grain size exponent (n). For n=2, Q of 350 kJ/mol, k0 of 1.7×1021 μmns−1 and Q of 35 kJ/mol, k0 of 2.5×10-5 μmns−1 were obtained for group II and III, respectively. With respect to future work, field-data based grain growth modeling might be a promising tool for investigating the influences of secondary effects like porosity and second phases on grain growth in nature, and to unravel differences between nature and experiment.

Uso del Análisis Digital de Imágenes (ADI) como herramienta para el estudio petrográfico en rocas metamórficas

Los retos en las actividades de innovación en docencia, se basan en la necesidad de proponer nuevos métodos y estrategias que permitan ampliar y armonizar toda clase de recursos que se tengan disponibles, para potencializar los resultados en el proceso de enseñanza - aprendizaje -- En el caso de la asignatura de rocas metamórficas, es muy común identificar dificultades en los estudiantes en el análisis petrográfico, identificación de minerales, patrones texturales, y relación con curvas de blastesis; por lo anterior se quiso implementar el tratamiento de análisis digital de imágenes (ADI), como una herramienta pedagógica que facilite el aprendizaje de los mismos

Electron microprobe investigations of metamorphic reactions and mineral growth histories, Kwoiek area, British Columbia

The Kwoiek Area of British Columbia contains a pendant or screen of metamorphosed sedimentary and volcanic rocks almost entirely surrounded by a portion of the Coast Range Batholith, and intruded by several dozen stocks. The major metamorphic effects were produced by the quartz diorite batholithic rocks, with minor and later effects by the quartz diorite stocks. The sequence of important metamorphic reactions in the metasedimentary and metavolcanic rocks, ranging in grade from chlorite to sillimanite, is:

1. chlorite + carbonate + muscovite → epidote + biotite

2. chlorite + carbonate → actinolite + epidote

3. chlorite + muscovite → garnet + biotite

4. chlorite + epidote → garnet + hornblende

5. chlorite + muscovite → garnet + staurolite + biotite

6. chlorite + muscovite → aluminum silicate + biotite

7. muscovite + staurolite → garnet + aluminum silicate + biotite

8. staurolite → garnet + aluminum silicate

Continuous reactions, occurring between reactions 5 and 7, are:

A. chlorite + (high Ti) biotite + Al₂O₃ (from plagioclase?)→ garnet + staurolite + (low Ti) biotite + O₂

B. muscovite (phengitic) → garnet + staurolite +muscovite (less phengitic) + O₂ (?)

Detailed electron microprobe work on garnet, staurolite, biotite, and chlorite shows that:

(1) The garnet porphyroblasts are zoned according to a depletion model, called the Rayleigh depletion model, which assumes equilibrium between the edge of a growing garnet and the minerals which are unzoned, notably biotite, chlorite, and muscovite, but which assumes disequilibrium within the garnet.

(2) The staurolite porphyroblasts are also zoned, and from their zoning patterns reactions A, B, and 5 are documented. Progressive reduction of iron with increasing grade of metamorphism is also inferred from the staurolite zoning patterns.

(3) During a late period of falling temperature garnet continued to grow and the biotite and chlorite reequilibrated. The biotite, chlorite, and garnet edge compositions can vary from point to point in a given thin section, indicating that the volume of equilibrium at the final stage of metamorphism was only a few cubic microns.

(4) The horizon within the garnet that grew at maximum temperature can be identified. The Mg/Fe ratio of this horizon, if the garnet composition is a limiting composition in the Al₂O₃ - K₂O - FeO - MgO tetrahedron, increases systematically with increasing metamorphic grade. Biotite and chlorite compositions also show a general increase in Mg/Fe ratio with increasing metamorphic grade, but staurolite appears to show the reverse effect.

(5) The Mg/Fe ratio at the maximum temperature horizon of the garnet porphyroblasts is a function of its Mn content as evidenced from the study of five garnet-bearing rocks, collected from one outcrop area, with the same assemblage but with differing proportions of minerals.

An important implication of zoned minerals is that the effective composition of a system in a phase lies on the join between the homogeneous minerals (if there are two) and not within three-or- four-phase fields when a zoned mineral, such as garnet or staurolite, is present in the assemblage.

Study of the three aluminum silicates found in the Kwoiek Area showed that a constant pressure change in polymorphs from andalusite to kyanite to sillimanite took place with increasing temperature. This transition series is best explained by the metastable formation of andalusite.

Photographic materials on pages 15, 121, 160, 162, and 164 are essential and will not reproduce clearly on Xerox copies. Photographic copies should be ordered.